Transaction Iview - SAP GUI for HTML

Hi,
In SAP transaction iviews - SAP GUI for HTML in portal there is a possibility to go to menu,other transactions from the transaction field.Is there any way to remove the Menu button and hide the transaction field from transaction iview.
Please suggest.
Thanks,
Rajani

Hi Rajani,
Transaction iview which will control the menu,cancel buttons in SAP GUI for HTML
the url provided by Damian contain the solution for your requirement.
If you are looking somthing different then pls explain the requirement
Just let us know which specifiy buttons you want to show in transcation IVEW.
Thanks,
Anil

Similar Messages

Transaction iView - SAP GUI for HTML-blank on some systems

Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
Reena

Hi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick.

How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

Hello all,
I have created a simple SAP Transaction iView of type SAP GUI for HTML. This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System. My requirement is, I dont want to see the menu bar that has these buttons. How do I go about it? Please advice.
Note: My iView is a SAP Transaction iView and not IAC service related iView.
Thanks
Vicky R.

You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
It is a binary parameter with the following values/options:
0 : Hiding the page header completely (not recommended)
1 : Standard setting
This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
2 : Displaying the title line
4 : Displaying the buttons [Exit] and [Help]
8 : Displaying the active system buttons on the screen ([Back] and [Cancel])
16 : Displaying the system menu
32 : Displaying the application buttons
128 : Deactivating the information block in the status bar (new)

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its -><b>webgui</b>
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

Hide command box in portal transaction iview sap GUI for HTML

I have tried &~NOHEADEROKCODE = 1 and ~NOHEADEROKCODE = 1 in the applications parameters with no luck. Can this be done from the ivew?

Hi Shelly,
I've recently configured ITS transactions to publish on portal setting this parameters on SICF to limit actions, header, possibility to open other transactions:
SAP Library - SAP ITS in the SAP Web Application Server
~TRANSACTION
Transaction code to be executed
<<Your transaction code>>
~NOHEADEROKCODE
Hide transaction launcher
1
~GENERATEDYNPRO
Enable screen html generator.
1
~WEBGUI_SIMPLE_TOOLBAR
This simplifies toolbar.
137
~SINGLETRANSACTION
User only could access to transaction defined by parameter ~TRANSACTION.
1
~WEBGUI
Enables a set of html properties to get a better UX.
1
Hope this helps,
Kind regards!

Transaction IView -- SAP GUI for Windows

Hi,
I have created a transaction iview -- sap gui for windows in my portal.
Even thought i logoff from my portal, sap gui session that is opened is not closed.
Can any one please suggest me a way to stop sap gui session also when i logoff from my portal.
Regards,
Nidhideep.

Very difficult. The SAPGUI window doesn't know anything about being launched by the portal.
You could try launching inside the portal content area.
Also, what is the problem with having the SAPGUI still open?
Cheers

SAP transaction iview of GUI for html never works

Hi All,
We are implementing ESS/MSS on EP 7.0, ECC 6.0, ESS/MSS 600 landscapes for India Country grouping.
There are few SAP transaction iviews of type GUI for html and we tied up those to ESS Overview homepage framworks.
However, each of these transaction iviews throws the same error messages as below :
Error when processing your request
What has happened?
The URL http://hostname.domain:8001/sap/public/bc/its/mimes/system/sl/page/menubase.html was not called due to an error.
The following error text was processed in the system TD1 : This function is not possible
The error occurred on the application server TCSCQ1_TD1_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP.
I have activated all of the ITS services from sicf transaction. Published all of the services (global, webdui, webdui_start, system, shuffler) to internal.
I also executed the Webgui service from sicf tcode. But, still the same error message persists. Am I missed any settings for Integrated ITS ?
When I enabled option (Display a notification about every script error) from IE options, the system keeps on giving the mesage 'window.wgu.global.eventhandler' is null or not an object, wgu.ObjEventHandler' is undefined etc.,
I have noticed that none of the ITS services never work.
I would appreciate if anyone can shade some light regarding this issue. Any guidance or inputs in this context would be of greatfully help.
Regards,
Anil Kumar.

Please don't cross post messages....

Hideing menu in Transaction iview with GUI for HTML

hi,
I have created a transaction iview with ITS
now the requirement is that user should not see any menu
i have googled and found some abstract information like
~singletransaction.
~webgui = 1
~generatedynpro = 1
not clear with how and where to do it
please let me know if it is possible to hide the menu from IView it self by passing some parameters
Thanks,
Pavan

Hi Pavan,
Refer to this
http://wiki.sdn.sap.com/wiki/display/HOME/Article-EmploySAPGUIforHTMLinsteadofanInternet+service
You need to modify the WEBGUI service for this.
In transaction SICF, Navigate to dafault_host->sap->bc->gui->sap->its->webgui.
Thanks
Prashant

Problem With SAP GUI for HTML iView

Hi All,
I have created a transaction iView(SAP GUI for HTML) for the T code SE12, when I view the iview, it get loaded for the first time and if I log out and when i again login to the portal and view the transaction iview it is not getting loaded. If I clear the cache(By pressing Ctrl+F5) the same iview get loaded.
Could any one help me in solving this problem
Regards
Sivaprasath

Hi Shiva,
For SAP transaction iViews better to use SAP GUi for Windows option instead of SAP GUI for HTML.
Hope it helps for you..
Cheers
Phani

Image not displaying properly for SAP GUI for HTML transaction iview

Hi,
We have a sap gui for HTML iview for transaction REORRR in portal. After giving enough inputs this leads to Business Document Navigator screen(part of Document management) where i need to display a document(.jpg image in this scenario). When i double click on the image it is opening on the right side of the screen but in a compressed format where in we need to scroll down to see the image. But i would require the image to display with out scroll bar or in a new window.
When i change the format of the iview as SAP GUI for Windows the image is opening in a new window.
I would like to know whether there is any configaration settings either in portal or in Document management side. or is this any limitation of the SAP GUI for HTML scenario.
regards
Bharat.

Hi,
You can open this iview in a new window make the setting in the iview properties that will allow the iview to be opend in a new window.
Regards,
Vamshi.

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

WebDynpro with embedded SAP GUI for HTML transaction

Hello,
I have been given a requirement for a WebDynpro application that will have some links and figures at the top and underneath that there will be a SAP GUI for HTML transaction visible. What is the best method for handling this type of scenario? This is a 7.0 portal connecting to ECC 5.0 on the back-end.
Thanks,
Bert

Hello Bert,
I would have implemented your scenario in following way:
1. Create a transaction iView in portal using SAP GUI for HTML.
2. In the web dynpro application, you have multiple choices to use the transaction iview created in above step.
         a. Use a IFrame UI element giving it the portal based url for the transaction iview
         b. Use POrtal Navigation API to navigate to the transaction iview.
         WDPortalNavigation.navigateAbsolute(
         "ROLES://portal_content/com.sap.PageNavigationProject/com.sap.TargetPage",
            WDPortalNavigationMode.SHOW_INPLACE,
            (String) null,
            (String) null,
            WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
            (String) null,
            (String) null,
            [<url params>]
Hope this helps you.
Regards,
Prasanna

Which role that Take a iview use SAP GUI for HTML need ?

hi all
    i made a transaction iview use the sap gui for html,and this ivew add a role,the role add a user.and the user had only this role.when i use the user logon the portal,it will give me a error message:
portal runtime error....
   whether it need another necessary role?
   and when i take the user to mapping user.i can't found any system that i had configration.
    but i can do all use admin user .
   what i can do?

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

BBS BEX Query to R3 Transaction - Connect to SAP GUI for HTML not to R3 Backend-TA

Hi Experts,
I try to customize a report-report-interface from a bex query to R3 transaktion fs10n.
I configurated everything in TA RSBBS within BI.
When I start the BBS from the BEX Query a browser session opends, I have to enter the login data for the R3 system an SAP GUI for HTML is started.
Several years ago I tried the same and was connected directly to the Backend-Transaction within R3.
Was there a change within the last year?
Is it possible to configure somewhere in R3 or BW that I want to be tranferred to the Backend-TA and not to open a SAP GUI for HTML?
Can someone help?
Best regards
Mirjam
(SAP Netweaver 7.31 -> SAP ECC 6.0)

Hi Stephen,
You should try running one of these transaction iViews using Firefox and have Firebug installed (or use HTTP watch in IE). This might show you why the styles are not being loaded, it could be that since the upgrade something has changed in the SICF configuration settings that is blocking the download of the CSS... that is just a guess, but if you use a tool that will show you the HTTP traffic (like Firebug) then you might get a better idea of what is going on.
Hope this helps,
Simon

Launch Approval Appraisal Documents in Iview format not SAP GUI for HTML

Hi,
Sorry iam not sure whether this is the right place to post this question.
I have a requirement where i need to change the appearance of UWL tasks related to appraisal approval.
Whenever a user clicks on approve apraisal tasks it is popping SAP GUI for HTML and taking to the backend showing Performance appraisal display.Our client are in need of normal iview rather than sap view( sap gui view).
I have identified the tasks related to approval appraisal.The tasks in the backend are
approval appraisal - perf appraisal - ts91000005, URL generation - ts12300108 , Submitted obj - WS 91000003.
i have created an iview based on http://xxx.xxxx:8000/sap/bc/bsp/sap/hap_document/documents_todo.htm?sap-client=xxx&sap-user=xxxx&sap-language=E
i have given the ID and iview PCD link in SWFVISU.Reregistered UWL again and logged in as a test user.When clicked on Appraisal approval i can see the appraisals completed.It wont allow us to edit.All hap_documents are BSP pages.
I guess i did something wrong.
i have followed these links.
http://wiki.sdn.sap.com/wiki/display/ERPHCM/PMSworkflowsin+UWL
Error: Launch appraisal Workitems in UWL in Portal...
Appraisal approval after completion not possible in BSP
Please let me know the procedure to show the approval items in a normal iview format.
Thanks in advance.
Chakri.

Chakri,
You will probably have to change the XML being used in your UWL. Go into the ItemType portion for the PM task and check/set the following properties
connector="WebFlowConnector"
defaultAction="launchIView"
Check if your Action tags within the ItemTypes have the following properties
name="launchIView" handler="SAPAppLauncher"
Check whether the Property within Action tags is linked to your BSP view that you want to trigger when the task is clicked
For e.g. <Property name="SAPIntegrator" value="ROLES://portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.pages/....."/>
Once you change your XML dont forget to re-register your ItemTypes to the connector you are using.
Good luck
Pooja

Transaction Iview - SAP GUI for HTML

Similar Messages

Maybe you are looking for