Transaction Launcher for CRM IC Webclient

Hi
I need some help in configuring Transaction Launcher for CRM IC Webclient, the catch is the backend is not SD but Campus Management. Help pls [email protected]
Anu

Hi Raja
Thanks for your reply actually I don't have the cookbook can you please email me the link to the cookbook or the pdf. Thanks once again
[email protected]
Anirudha

Similar Messages

  • Transaction launcher for url in new window need "Back" to continue working

    Hello Experts,
    In the CRM I've created a Transaction Launcher for url, when I press on the link and open it in new window
    I got the following message:     "The object you have selected is starting in a new browser window. You can continue working normally in the current application. However, you may have to navigate back to the page you were working on. "
    how do I can still open the url ( which is BSP page)  in new window & can continue working with CRM without clicking on the Back button ?
    Thanks

    Have you solved the problem, Jamil?
    Hi Experts,
    I am also facing the same problem.
    The other possible solution I am thinking of calling the pop up window and then close the pop up.
    I don't know how can we call custom bsp page from view in pop up window. And then close the same pop up without asking user to click on any button.
    Thanks and Regards,

  • Transaction launcher for BOR in ECC

    Hi All,
    Transaction Launcher for BOR objects as explained in:
    http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/content.htm
    only refer to R/3 Enterprise.
    How should we launch transactions in ECC ?
    10x,
    Eyal

    Hi,
    I do mean mySAP ERP by writing ECC.
    what I am looking for is the settings in transaction
    CRMS_IC_CROSS_SYS and the settings in the target system.
    for now I tried in ECC trx. SICF activate (almost all) services and in CRM the ITS URL is http://<servername:port>/sap/bc/gui/sap/its/ccmp_rabox
    10x,
    Eyal

  • Transaction Launcher in CRM 7.0 WebUi

    Hi Experts,
    I've configured Transaction launcher for ECC transaction FBL5N in CRMWebUi.
    But when I click on the link a blank sceen is comming without any error messages.
    when I directly copy the URL in web browser its working fine.
    Any guesses where can I check?
    Thanks
    Manjushail

    Hi Manjushail,
    Is it a browser problem? Check your browser's security settings and relax some of them and see if it helps.
    -Rohit

  • Transaction launcher in CRM Web IC

    Hi,
    We are trying to use transaction launcher in the WEB IC to call an R3 transaction. We have successfully managed in DEV and now we want to move across to QA for transport. But the handler class and config is done for DEV so far. In order to work this in QA, should we create/define the R3 QA system as logical system + RFC in our CRM Dev box and then transport ? Will it be required to be done for Prod as well then from dev?  is there any other recommended way of doing this.
    Regards,
    Vin

    Transaction Launcher handler class user mapped logical system to connect to R/3 environment.
    I dont think you can transport Logical System,RFC Connections from Dev to QA or QA to Prod.
    So before you start testing on QA,make sure that logical system for R/3 is already defined and RFC Connection is established.All you need to do is make sure that mapped logical system is created with the same name you have in DEV.To define the mapped logical system follow the path
    Easy Access->Interaction Center->Interaction Center WebClient->Administration->System Parameters->Defined Tx Launcher Log Sys and URL's.This is the easy way without changing your code in Handler Class.
    If you have already established a mapped logical system and you dont want to create another then you can do some code change in the below mentioned handler class methods
    1. CONSTRUCTOR.
    ** In the Constructor methos replace the OWNLOGSYS with 
      ** the available mapped logical system in your QA env
      property-name  =  
      cl_crm_ic_abox_constants=>mapped_logsys.
      property-value = 'OWNLOGSYS'. "#EC NOTEXT
      append property to gt_properties.
    2. CLASS_CONSTRUCTOR .
    ** In the Constructor methos replace the OWNLOGSYS with 
      ** the available mapped logical system in your QA env
      gv_mappedlogsys =
        'OWNLOGSYS'. "#EC NOTEXT
    3.GET_ACTION_DEFINITION .
    ** In the Constructor methos replace the OWNLOGSYS with 
      **the available mapped logical system in your QA env
       concatenate cl_crm_ic_abox_constants=>bor_action
                  'BUS1006005'  "#EC NO_TEXT
                  'EDIT'  "#EC NO_TEXT
                  'OWNLOGSYS'  "#EC NO_TEXT
             into rv_result.
    The same applicable for QA to Prod too.
    Hope this helps.
    Thirumala.

  • Transaction Launcher in CRM 7.0 reverts back to CRM view.

    Hi Experts,
    I have configured all the necessary setting required for transaction launcher but still cannot launch it.
    The issue is when i launch it, it directs me to the logon screen of target system (ERP/ECC). Once i give my userid/psw, system thinks for couple of second and the system jumps back to CRM view.
    In my case, i'm using transaction launcher to launch VA31 (Scheduling agreement). On executing the launch transaction it is closed immediately and the system reverts back to account identification screen without any error message.
    I have created ZTSTC in ECC and checked "synchronous" for method "transaction.execute". Do i need to create ZTSTC in CRM as well?
    Thanks
    Shree

    Hi Shree,
    First, you don't need to create ZTSTC in R3/ECC. Create ZTSTC in CRM and make the method: ZTransaction.Execute - Synchronous. Then change the status to 'Released'.
    In R3, in /NSE80 create a Display Object, like "ZCUSTOM". In ZCUSTOM create a method. In your case create "ZVA31". In the ABAP tab of the method, check 'Transaction' and in the 'Name' field enter: VA31. Save and release this method and Object.
    Now, before you proceed with the next step of seting up SSO (Single Sign On) check if these notes have been followed:
    A) Maintain the settings for domain 'CRMD_CIC_ABOX_ITS_BASE_URL' in SE11 as per NOTE: 1337200.
    B) Maintain settings for logical systems as per Notes: 1337472 (For R3) and 1337200 (For CRM) logical systems.
    After this ensure that the URL for R3 ITS looks like this: http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
    Before creating R3/ECC Transaction launcher links - SSO certificates need to be setup by BASIS.
    a.     Import CRT certificate into target system (your CRM client) via Export/Import in STRUSTSSO2
    b.     Run SSO2 in target (CRM) and check green lights.
    c.     Maintain table TWPSSO2ACL and put in system and client (CRM, XXX)
    d.     Activate in SICF /sap/public/bc/its and also sap/bc/gui/sap/its
    e.     SE80 -> Internet Services.  Look for SYSTEM and WEBGUI and Publish them.
    Please try these and let me know if this works for you.
    Regards,
    Ramesh Nallabelli

  • TRANSACTION LAUNCHER--CALLING CRM Z TRANSACTION THROUGH WEB UI

    As per the requirement, we are trying to call CRM  Z transaction through web UI. We have used the Object TSTC and created a replica of the object ZTSTC and used the method execute. Made the necessary config for navigation bar and Business role. We could see the link in the Navigation bar but the link could not call the transaction. Pls suggest.Do we need to take the object of the Transaction or copy TSTC and proceed. Thanks in advance.Points will be awarded

    PLS FIND THE DETAILS TO PROVIDE THE INPUTS
    Configure Transaction Launcher TO CALL T.CODE ZEGNM_IMG FROM CRM THROUGH WEB UI USING TRANSACTION LAUNCHER
    USED THE OBJECT ZTSTC BY COPYING TSTC OBJECT AND BY RELEASING THE OBJECT WITH METHOD EXECUTE
    PROVIDED THE T.CODE ZEGNM_IMG IN THE VALUE FIELD IN THE ABOVE SCREEN
    CREATED THE DIRECT LINK ZEGNM_K
    CREATED THE DIRECT LINK GROUP ZEGNM_K
    ASSIGN THE DIRECT LINK TO THE DIRECT LINK GROUP
    ASSIGN THE DIRECT LINK GROUP TO THE PROFILE TMFLEASING WITH POSITION 80
    IN THE BUSINESS ROLE CUSTOMIZING MADE THE DIRECT LINK GROUP VISIBLE
    AFTER MAKING THE ABOVE CONFIGURATION WE HAVE LAUNCHED THE WEB UI AND THE FOLLOWING ERROR IS SHOWING UP
    PLS FOLLOW THE ABOVE SCREENSHOTS AND PLS PROVIDE YOUR INPUTS TO ACHIEVE THE OBJECTIVE OF LAUCHING THE Z CRM GUI TRANSACTIONS USING TRANSACTION LAUCHER
    ALSO PLS FIND THE SCREENSHOT OF ITS
    URL OF ITS USED
    u201Chttp://crd.tmf.com:8003/sap/bc/bsp/sap/its/webgui?transaction=IC_LTX&okcode=ICEXECUTEu201D

  • Transaction Launcher for WebUI

    Hi,
    hope anybody can help.
    Is it possible to open a external WebPage in a WebUI assignment block by using the transaction launcher?
    We need to add a custom assignment block to the appointment WebUI which show informations from a other system. This other system provide the required informations by s simple HTML page.
    Regards,
    Anton

    Looks at the CRM Wiki page https://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUIFramework
    there is a link to
    How to Launch URLs from Navigation Bar using Transaction Launcher

  • LAUNCHING URL BY CLICKING ON BUTTON(USING TRANSACTION LAUNCHER) IN CRM 2007

    Hi,
    I am working on the object which requires configuring transaction launcher so that when button is clicked,URL is open. This development need to be implemented in CRM 2007.
    Kindly suggest.

    We are working in a sandbox environment on CRM 2007 and trying to launch a transaction in an ECC 6.0 system. We get a login box into the ECC server which executes fine but after a few seconds we are returned back to the CRM server without displaying the transaction. All authorizations are correct but it seems that the container is not being populated with the requested transaction. Has anyone else seen the same behavior? We are about to put in a note to see if we can get assistance. We have implemented latest Support Packs and Enhancement Pack 3 was recently installed in the ECC environment. We have implemented all the appropriate notes (1029777) to make sure that we are using the recommend functionality.

  • Transaction Launcher for Multi Client system

    Hi Gurus,
    I need a very big help. This is my problem:
    The CRM system on which I'm currently working has two client 1 and 2 and the second one
    is closed to customizing, so that all the settings we can make are on
    1. When we create a transaction laucher object, by
    transaction CRMC_UI_ACTIONWZ, we got the following error: "An RFC
    destination could not be specified for the logical system 2" (even if the connection are all set up)
    and if we set it from 2 at the end of the process we get the
    following message: "Client 2 has status not modifiable".
    In this way both on client 1 and 2 we´re able to execute only
    transactions of client 1.
    All the settings have been done according to the official SAP guide.
    Since on SAP guides there are no information about how set up the
    transaction laucher in a similar situation, how can we solve this issue?
    Please, reply as soon as possible.
    Thanks a lot,
    A.G.

    Hi Helmut,
    well I am also not sure what they did, but anyway, from the beginning on bw is designed to have only one client to work in. Technically I believe that all of the 'BW-Tables' storing the BW metadata don't have a client field. So how will you separate developments of different clients?
    regards
    Siggi

  • Looking for CRM IC Webclient HTML page

    Hi guys
    I need to change a value which is found on a HTML page.
    The page starts with :
    <html dir="rtl"><head><title>Interaction Center</title>
          <SCRIPT language="JavaScript">
    This html can be obtained if I tight click the page in the browser and look for the
    page source code.
    But I cannot find this page.
    I have searched SE80 under CRM_IC_* modules and found nothing.
    Any hint will be appreciated
    regards
    yuval

    Hi Yuval,
    Instead of looking into the source code of the broweser better you maintain the parameter CRM_ICWC_TEST with value 0x23456789 in your user setting. This will activate your tool tip and then you will see a tooltip appearing in the application when you point your mouse to the title of a view, telling you the BSP application name .
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Open ERP transaction within CRM 2007 using wizard for transaction launcher

    Hello everybody,
    I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
    First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
    Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
    Any help is highly appreciated.
    Thanks lot and kind regards,
    Franziska

    Hi,
    The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
    Remember, for sucessfull transaction Launcher Configurations,
    1) The client in which WEB UI Runs
    2) The Logical System mapping and client mentioned in ITS url
    3) The client is which you created the BOR object.
    4) The client on which you are configuring transaction launcher wizard
    ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
    For example,
    If my WEB UI is on client 200 of development system,
    then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
    In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
    Hope this helps.
    Thanks & Regards,
    Suchita

  • How to Call SAP ECC transactions into CRM IC Webclient Profile Screen

    Dear all,
    We are implementing IC Webclient application for our Clientu2019s call center operations.
    All sales related activities are being created in back end SAP ECC system like, starting from Quotation to Sales Order, Deliveries and Billing.
    Client wants to see all relevant ECC reports of Sales transactions in IC Webclient Screen.
    Connectivity between SAP CRM and ECC has already been established and we did all basic configuration for IC Webclient, but donu2019t know how to and where to call ECC transaction in IC Webclient Screen.
    I am looking for suggestions from any of you to handle this requirement successfully. I would be grateful if you send me any documentation which addresses this requirement.
    Your suggestions and help will be highly appreciated.
    Thank you,
    Raghu ram.

    Hi,
    Step-by-step process for the same is as follows:
    1. Create a launch transaction to launch the relevant BOR object at the following
    IMG->CRM->IC WebClient->Basic Functions->Transaction launcher -> Configure Transaction Launcher (Wizard).
    This wizard is very useful and easy way to create a launch transaction and guides through each step and generates a handler class for you.
    2. This transaction now has to be incorporated in the Navigation bar. For this you have to create navigation bar entry and navigation bar profile.
    IMG-> CRM-> IC WebClient->Basic Functions -> Define Navigation Bar Profiles
    Here you have to first Define Entries where you would input Launch transaction ID created in step 1 and then Define the Navigation Bar Profile.
    3. Assign the Navigation bar profile to IC WebClient profile.
    Please note that you can you Transaction launcher for incorporating any web links, PCUI Transactions, CRM Transactions, ERP transactions etc.
    Regards,
    Deepak

  • Unable to access ECC transactions from CRM using Transaction Launcher

    Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
    1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
    2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
    3)     Is there any other issue and need development specifically related BOR TSTC?
    Warm regards and thanks in advance for your time.
    Prasad

    Hello JC,
    Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
    Transaction Launcher
    Regards,
    Ashik

  • ITS WebGUI in CRM(By transaction launcher )

    Hi all,
    We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
    We have done the following steps using the SAP best practices (C04-Configuration guide):
    1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
    and ERP system with url
    http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
    2. we have set TSTC to synchronous (CRM and ERP)
    3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
    4. we have created logical link for transaction and we assigned the link to work center and business role.
    The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.My CRM Version is 7.0 EHP1.
    The webgui service in the tx sicf have been a test, after login in, a blank picture with a red x "PLease wait..."  is also remaining.
    Can anyone help?
    Thanks in advanced.

    Lei Cao,
    Want to check if this issue is resolved. I have the same problem where I am getting 'please wait" with red x screen when I configured transaction launcher from crm web ui.
    Did you ever get this resolved? If so please share your approach ? And is this authorization related?
    Rajani

Maybe you are looking for