Transaction Launcher for Multi Client system

Hi Gurus,
I need a very big help. This is my problem:
The CRM system on which I'm currently working has two client 1 and 2 and the second one
is closed to customizing, so that all the settings we can make are on
1. When we create a transaction laucher object, by
transaction CRMC_UI_ACTIONWZ, we got the following error: "An RFC
destination could not be specified for the logical system 2" (even if the connection are all set up)
and if we set it from 2 at the end of the process we get the
following message: "Client 2 has status not modifiable".
In this way both on client 1 and 2 we´re able to execute only
transactions of client 1.
All the settings have been done according to the official SAP guide.
Since on SAP guides there are no information about how set up the
transaction laucher in a similar situation, how can we solve this issue?
Please, reply as soon as possible.
Thanks a lot,
A.G.

Hi Helmut,
well I am also not sure what they did, but anyway, from the beginning on bw is designed to have only one client to work in. Technically I believe that all of the 'BW-Tables' storing the BW metadata don't have a client field. So how will you separate developments of different clients?
regards
Siggi

Similar Messages

Contractual User Type: 11 Multi-Client/System

Hi,
In BW 3.5 we had option to select Contractual User Type: 11 Multi-Client/System under Licence Data of Users.
However, in BI 7.0, we do not see option 11 Multi-Client/System at all.
Can you please advise,why this is not there? Is it replaced by some other type?
Best Regards,
UR

Hello,
you can select the available license types in transaction USMM (Tab User types). Check before you use license type 11 if there is only the need for it. In general you don't need license type 11 in a common SAP environment.
Regards,
Milan

Transaction launcher for BOR in ECC

Hi All,
Transaction Launcher for BOR objects as explained in:
http://help.sap.com/saphelp_crm40/helpdata/en/12/c3e68620514b499c06b8eb26874424/content.htm
only refer to R/3 Enterprise.
How should we launch transactions in ECC ?
10x,
Eyal

Hi,
I do mean mySAP ERP by writing ECC.
what I am looking for is the settings in transaction
CRMS_IC_CROSS_SYS and the settings in the target system.
for now I tried in ECC trx. SICF activate (almost all) services and in CRM the ITS URL is http://<servername:port>/sap/bc/gui/sap/its/ccmp_rabox
10x,
Eyal

Transaction launcher for url in new window need "Back" to continue working

Hello Experts,
In the CRM I've created a Transaction Launcher for url, when I press on the link and open it in new window
I got the following message: "The object you have selected is starting in a new browser window. You can continue working normally in the current application. However, you may have to navigate back to the page you were working on. "
how do I can still open the url ( which is BSP page) in new window & can continue working with CRM without clicking on the Back button ?
Thanks

Have you solved the problem, Jamil?
Hi Experts,
I am also facing the same problem.
The other possible solution I am thinking of calling the pop up window and then close the pop up.
I don't know how can we call custom bsp page from view in pop up window. And then close the same pop up without asking user to click on any button.
Thanks and Regards,

Transaction Launcher for CRM IC Webclient

Hi
I need some help in configuring Transaction Launcher for CRM IC Webclient, the catch is the backend is not SD but Campus Management. Help pls [email protected]
Anu

Hi Raja
Thanks for your reply actually I don't have the cookbook can you please email me the link to the cookbook or the pdf. Thanks once again
[email protected]
Anirudha

TMS configuration for multi-clients in one system

Hi All,
we have got some problem defining transport routes in stms in transport domain...
We have to add to target group for one system 6 clients:3 clients with the dev/test roles for country X and 3 clients with dev/test roles for country Y.
Transport requests have to route only between clients for defined country (only for country X or only for country Y, must not mix).
How i can get status when transport requests will route in one system only between clients of country X (or only for country Y)?
Should i define two target groups and add to one group 3 clients for X and to the second 3 clinets for Y? I am not sure that it is enough. May be exists a lot of other options/ actions?
Where is garanthy that requets from country X will not mixed with requests from Y?
Thanks a lot.

> The SSO is working fine for only the client which we used to import the certificate (verify.der).
> 1>Is it that the certificate import should be done from all the clients exclusively ?
Logon ticket certificate is instance wide, not client dependent. And you need to call STRUSTSSO2 in client 000 to export/import.
> And the SSO is not working for other clients in the same system .
> 2>If yes can you tell the procedure, why b'coz transaction STRUSTSSO2 is same for all clients and if we try to import the certificate again how about the existing one over there ?
Could you provide more details about this issue you're facing? What is the Portal UME source? What application is it based on, BI or ESS/MSS?

How to restrict executing tcodes in transaction tab for master clients

This question applies SOLMAN project implementation tools: SOLAR01, SOLAR02 and so on.
Our ERP2005 development U50 system has two clients:
One is master client 101 where all customizing should take place but no transactions are allowed
second client 102 works as sandbox client where new customizing can be test and master data and transaction are allowed.
Only U50/101 is defined in Solution manager SMSY in system role 'development system'. Currently U50/102 is not defined in Solution manager to any system role at all.
As configuration should take place via Solution manager, the consultants use SOLAR01 and SOLAR02 in system role 'development system' meaning that they are connected to U50/101 if want to execute transactions in transaction tabs or IMG nodes in Configuration nodes.
But U50/101 is our MASTER client and no transactions nor most master data are allowed in there. We want to keep it clean. How can I avoid tcodes being executed in system role 'development'. I want to allow consultants use tcodes if they change to system role 'quality system'. But they might forget to change the system role before executing the transaction.
Is there an option in Solution manager Project implementation tools that do not allow tcode launch from transaction tabs when system role is 'development system'.
Of course I can restrict tcode execution with authorizations in satellite systems, but then I would need to disable authorizations for each tcode possibly being used. So I don't like that option.
br: Kimmo

Okay, I'll continue dialog with myself. I found solution how to assign other clients on one system to other system roles, which are so-called 'customer roles'.
See solution manager help:
http://help.sap.com/saphelp_sm40/helpdata/en/3b/8be61c54d22945837fd69861d21a08/content.htm
I did not know until know, that system roles are actually customizable. The roles with letter P,D,C,T,E, etc. are reserved for SAP but you can create your own system roles into table SMSY_ROLES. You would not do it with SM30, but from tcode SMSY and following menu Utilities-System Settings->tab:System Roles. Switch to change mode. Roles with 0-9 are available for "customer roles". Choose role type and write your own description ( like: Sandbox client in development system ).
Now the new role is available in SMSY. But You cannot see it yet in SOLAR_PROJECT_ADMIN/System Landscape tab. In there you must press button 'System role assignment' and in the opening window add your own 0-9 role defined earlier and save. Now you see your new role in 'system landscape' tab and you can assign systems to it like you had done with SAP standard roles.
Now users using implementation tools can change their current system role to your new 'customer role'.
But what it comes to my original problem (see title), that still remains. I have debugged the tcode execution from transaction tabs and don't see any possible way to avoid tcodes being executed for an unwanted system role. An Enhancement Spot ( =new BADI) can of cource be used for making custom rule for my requirement.
I'll make this thread answered. Hope you joined my self-dialog.
Keywords: DEFINE EDIT SYSTEM CUSTOMER ROLES SMSY_ROLES
br: Kimmo

Transaction Launcher for WebUI

Hi,
hope anybody can help.
Is it possible to open a external WebPage in a WebUI assignment block by using the transaction launcher?
We need to add a custom assignment block to the appointment WebUI which show informations from a other system. This other system provide the required informations by s simple HTML page.
Regards,
Anton

Looks at the CRM Wiki page https://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUIFramework
there is a link to
How to Launch URLs from Navigation Bar using Transaction Launcher

Apple TV2 missing analog audio output for multi-zone system

Found out the hard way that most receivers can't support digital audio in multiple zones (i.e., Zone 2). Since Apple TV2 (ATV2) dispensed with any analog output, if you have a whole-house system that depends on mult-zone to distribute audio to various speakers, you won't be able to use ATV2 to stream music to anything other than Zone 1. The only outputs are HDMI and optical (both digital audio). I think I found a work around (which, of course costs more money) which is a "de-embedding" device from Atlona that takes HDMI in and splits out the audio to analog and passes the HDMI through to the receiver. The analog audio output then lets me connect to the analog in on the receiver so it can stream to all zones. I figure Apple just didn't have enough real estate on the new product to make room for analog, but it's a pain. Hope this helps someone. If anyone knows a better work-around, I'd love to hear it.

I have the same issue with a MacMini I use for music. My solution was to use an inexpensive optical splitter - one feed to the optical input of my receiver and the second to a DAC. Then run standard RCA audio cables from the DAC to the analog Zone 2 inputs.
Here is a link for a DAC
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042302&pid=6884&seq=1&format=2
They should have the splitter as well.

OCSM FOR MULTI CLIENT INSTALL

Can anyone give me a clue as to why the Oracle Client Configuration Manager and the Oracle Client Software Agent do not appear as installable programs when you run Installer from the CD (and the Installer patch come to that)?
Thanks.

Hi SYDZ!!,
You can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc
Regards,
Romit Sinha

Selecting OS language for multi-lingual systems

Hi,
I just got a T400 yesterday, which was supposed to include a multi-lingual version of XP (English/Swedish/Finnish). However, I never got the choice at startup to choose language, and it defaulted to swedish. I have already tried to restore the system to factory defaults from the Rescue & Recovery partition, but also then I didn't have a choice.
Is there anyone who knows how I can switch OS language to english, or, is there any way to check that my version is indeed multi-lingual?
Thanks in advance,
Per

Have you tried Control Panel / Regional settings / System Locale yet?

Chat Programm for multi client-server on LAN

import java.net.*;
import java.io.*;
public class ChatClientThread extends Thread
{ private Socket socket = null;
private ChatClient client = null;
private DataInputStream streamIn = null;
public ChatClientThread(ChatClient client, Socket socket)
client = _client;
socket = _socket;
open();
start();
public void open()
try
streamIn = new DataInputStream(socket.getInputStream());
catch(IOException ioe)
System.out.println("Error getting input stream: " + ioe);
client.stop();
public void close()
try
if (streamIn != null) streamIn.close();
catch(IOException ioe)
System.out.println("Error closing input stream: " + ioe);
public void run()
while (true)
try
client.handle(streamIn.readUTF());
catch(IOException ioe)
System.out.println("Listening error: " + ioe.getMessage());
client.stop();
public static void main(String args[])
}

Refer to the response here:
http://forums.sun.com/thread.jspa?threadID=5428090

Do you have a "transaction" scope for multi-request views

We have and application that includes multiple tabs, which are really iframe instances. We need to maintain state for the entire time the tab is open, which may be across multiple requests.
I am not comfortable making all our backing beans "session" scope, and making them "request" forces us to do lots of work (DB access etc...) on every post-back to re-initialize the backing bean.
I have been looking at both Shale and JBoss SEAM to give me this "conversational" scope. I have looked at "process" scope, however we may have the same backing bean in use for multiple tabs, therefore would need it linked to something like the viewId.
Does ADF plan on enhancing the "process" scope functionality or is it OK to add SEAM or shale at the front-end of the ADF processing lifecycle?
Your guidance would be appreciated.

Hi,
have a look at the ADF developer documentation on OTN and read the chapters on taskflows. You can have beans in a taskflow that have their scope set to backing bean.
If a taskflow is then used multiple times in a region, the backing bean scope makes sure the two instaces are isolated
You can't mix and match Seam or Shale lifecycle with ADF Faces RC and vice versa.
Frank

Server sizing for multi-client Acrobat Reader access of .pdf files

I am trying to specify the appropriate file server (need processor rating & memory size)running Windows 2008 for 64 high tempo users on a LAN accessing large .pdf files (~20 mb each) using Acrobat Reader 8 or 9. Total data package size is about 30 Gig. LAN is Gigabit speed on CAT 6 cable.
Suggestions?

Time is 10:35 PM, Jan 30, 2014 after a day of nerve racking attempts to get Adobe Reader 11.0.6 to open a pdf file I have finally succeeded in doing so. The following apkhan response to my original inquiry, even though it didn't directly help me much, but it gave me an insight that what I was inquiring about in the description of my problem had to do something with the EULA I was inquiring about and couldn't find were and how that is to be done. For whatever reason I had installed Reader 11.0.6 three times throughout the day and still couldn't read a pdf file or see the EULA to agree to it or not. During another installation of Reader 11.0.6 at 9:00PM, 1-30-14, a window appeared and required my administrative password to install the software and rightly so. This is probably the reason why Reader was so dysfunctional, because for whatever reason, this approval window didn't appear during the initial installations but I was allowed to install Reader anyways and the proof of it was it did end up in my Applications Folder-confusing and strange at best. Without my administrative password the software should not have been allowed to be installed and this has always been the case. I will have to dwell upon that one for a while. Anyway, for everyones information, the Mac version of 11.0.6 Adobe Reader doesn't ask for you to click a button to Agree or Not Agree to an EULA verbiage statement. Just above the INSTALL BUTTON (Yellow Background) on the installation window the instructions notes, when you hit the install button you aromatically agree to the EULA and the way you go. I tried getting into the EULA via the Adobe the desktop Icon but to no avail. Hopes this helps someone else. Thanks to those at the Adobe Community that tried to help me with this mind boggling episode.

Servlet Transaction engine for 5000 Applet Clients

Hi,
We want to develop transaction server for 5000 client terminals using java client and server based method.
That means, there 5000 numbers of terminals will send request to server frequently and get the response also.
The transaction data will be stored in the oracle database also. For this needful how do I architech the system.
We prefer Applet (Swing) will be the client application and servlet will be the server application which will run inside the application server.
So if any one have experience on this kind of project please guide me system design.
Apart from this Applet & Server communication, is there any framework which will give the best solution for our requirement.
Our application is same like ATM machine transaction. Like ATM machine, how should i define the server engine and client tier application.
by
dhaya

Hi,
We want to develop transaction server for 5000 client terminals using java client and server based method.
That means, there 5000 numbers of terminals will send request to server frequently and get the response also.
The transaction data will be stored in the oracle database also. For this needful how do I architech the system.
We prefer Applet (Swing) will be the client application and servlet will be the server application which will run inside the application server.
So if any one have experience on this kind of project please guide me system design.
Apart from this Applet & Server communication, is there any framework which will give the best solution for our requirement.
Our application is same like ATM machine transaction. Like ATM machine, how should i define the server engine and client tier application.
by
dhaya

Transaction Launcher for Multi Client system

Similar Messages

Maybe you are looking for