Transaction Launcher in system ERP 6.0 EIC

Hello,
Do you know where to find the properly configuration for the transaction launcher of EIC on ERP 6.0?
Because actually doesn´t run well
Thanks for your help!
Actually we have active service ccmp_rabox into "SICF" and in
the "spro"
IMG/Personal management/Employee Interaction Center( EIC)/ Interaction Center Web-Client/Basis Funtions/Transaction Launcher/ Define Logical Systems and ITS URLs.
I put http://:/scripts/wgate/CCMP_RABOX/!, but i find this configuratio to CRM and not to EIC.
Thanks

Hello,
CCMP_RABOX makes a lot of problems.
Please use ITS URLs as following:
http://<host>:<port> /scripts/wgate/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE, or
http://<host>:<port> /sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
as in note 1176990 and 1021222 described.
Please notice that there is currently another issue:
SAP Note 1360904 - SAP GUI for HTML: Application services do not start
Kind Regards
Uwe

Similar Messages

Transaction Launcher Logical Systems and URLs

Hi,
I'm facing a problem with Transaction Launcher.
I've done all the settings specified here: http://help.sap.com/saphelp_crm60/helpdata/en/46/231befc17b5872e10000000a11466f/frameset.htm
Under section "Define Transaction Launcher Logical Systems and URLs" I've specified the values for Quality System: the ECC system is MQAS200A
By the way, when I try to access an ERP Sales Order, the transaction CRM_TL_ERP_BUS2032_DISPLAY tries to access system MSVL200A (which is the Development ECC System).
I cannot change the Logical System within the Transaction Launcher Configuration (currently it is set to ERP), since the Transaction is standard.
Does anybody know how to map the generic value ERP with the correct value MQAS200A instead of MSVL200A?
Thanks in advance,
Regards,
Andrea Ricci

Hi,
You cannot generalize the Logical system name, for the workaround you need to put the logical system for quality and transport it to quality and it should work and to check in dev you need to again change the log. sys to dev and save it but dont transport it. Similarly you can do for production system.
Regards,
Shobhit

Transaction Launcher: Logical System in Production System does not change

Hi,
I created a transaction launcher in the CRM development system (CRD) to launch the transaction IL02 in the ECC 6.0 system (ECD). Then I transported the changes from CRD to the CRM production system CRP. I also transported the changes from ECD to ECC production system ECP.
However, when I see the transaction launcher in CRP system, it is still configured for the URL of ECD. I want the transaction launcher to connect to ECP. One option I have is to change the class name in the CRP system. However, I am not allowed to create a new ABAP class in the production system. Is there any other way to change the target system automatically in production system?
Thanks,
Rohan.

Thanks Piyush. Could you be a bit more specific? I followed these steps:
1. In transaction CRMS_IC_CROSS_SYS, created a logical system URL for production system
2. In customizing setting Copy/Delete Launch Transactions, deleted the transaction launcher id.
3. In customizing setting Configure Transaction Launcher, created the same transaction launcher id newly.
I still am not able to change the logical system. However, I can do it if I change the class name.
While deleting the transaction launcher id, should I be deleting all dependencies?
Regards,
Rohan.

Regarding Transaction Launcher

Hi Experts,
Plz give me steps for Transaction Launcher from R/3 to IC Web Client. I am following this bloge
/people/raja.g/blog/2007/01/24/displaying-r3-transaction-in-icwc-application
But in this blog no RFC configuration maintained.I need those steps.
I m following these steps..........
1 Maintaining logical system (BD54) for
2.Defining RFC in (SM59) for R/3
3.Connection for RFC destination to logical system as std BAPI Destination(BD97)
4.Assign Logical system to client (SCC4)
5.Define Transaction Launcher Logical Systems and URLs (CRMS_IC_CROSS_SYS)
in step 5 I maintain <b>Mapping logSys</b> maintain as RFC for R/3 and <b>Logical system</b> maintain in SCC4 and client .
I have doubt in 4 & 5 point.........plz clarify me these points.
After following that Blog.......
/people/raja.g/blog/2007/01/24/displaying-r3-transaction-in-icwc-application
After choosing BOR it ask logical system.it is giving error.
Plz clarify me......
Regards
Gaurav

Hi,
I do mean mySAP ERP by writing ECC.
what I am looking for is the settings in transaction
CRMS_IC_CROSS_SYS and the settings in the target system.
for now I tried in ECC trx. SICF activate (almost all) services and in CRM the ITS URL is http://<servername:port>/sap/bc/gui/sap/its/ccmp_rabox
10x,
Eyal

Transaction Launcher - Unable to access R3 transaction.

Hi Experts,
I am facing problem when accessing R3 document.
When I try to open delivery document from Order(Steps: Open an Order, Go to Shipping Transaction, Select delivery document.), I get 5 errors
Error 1: Details Mapped logical system ERP not defined -
Diagnosis
Logical system &1 is not defined.
System Response
It is not possible to connect to the SAP Internet Transaction Server (ITS). The launch transaction is cancelled.
Procedure
Define Transaction Launcher Logical Systems and URLs .
Error 2: Cannot determine logical system -
Error 3: Details Launch transaction CRM_TL_ERP_LIKP_DISPLAY not defined -
Procedure
Check the following profiles in Customizing:
Navigation bar profile
Transaction launcher profile
IC WebClient profile
Error 4: Details Launch transaction not defined -
Procedure
Check the following profiles in Customizing:
Navigation bar profile
Transaction launcher profile
IC WebClient profile
Error 5: Execution not possible; error in launch transaction. -
Any idea why configuration is missing?
Thank you.

Hi,
Please read below 2 blogs on transaction launcher.
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
/people/vikash.krishna/blog/2009/04/23/crm-2007-how-to--2-b-transaction-launcher
It seems couple of steps are missing for your transaction launcher.
Maintaining of systems in transaction: CRMS_IC_CROSS_SYS
and then Nav bar customizing.
I hope it helps.
Thanks,
Rohit

Transaction launcher call ITS R/3 - Save log on user informations

Good Morning,
I create a transaction launcher where i call an BOR object in SAP R/3 via ITS.
When the user click on the link in Web Interection center, is opened the SAP ITS that ask the log-on informations.
Happens that when the user accept an incoming call and open ITS R/3 from transaction launcher the system asks the user and password informations; when the call is finished and the user close the ITS web page, if the user accept a new incoming call, if the user open the ITS from trasaction call the system asks another time the log-on informations.
There is the possibility to be sure to save the log-on credentials when the user log-on the first time on ITS?
Thanks you
Best regards
Marco

Hi Marco,
As per my understanding of your problem, if i have understood it correctly, you want the logon information to be saved into your browser until the time you explicitly logoff. For this, you may try the following solution:
1. Identify the internet service that is being invoked (like service 'webgui'), goto transaction SICF and enter Service name as name as the one identified. eg. webgui.
2. In 'Logon data' tab, change the value of 'Deactivated System-wide' to 'Yes' for the re-authentication as shown in the picture.
Please let me know if you have more issues.

Transaction Launcher in ICWC with Handler Class

Hi All,
I am in the process of creating new Transaction through Transaction Launcher (Wizard) in IC WebClient.
I wish to know more about the creation of Transaction Launcher Handler class (With super class) and SICF - Services.
Please help me to create a new CRM/ISU Transaction through IC WebClient.
Thanks and Regards
Nalinakumar
[email protected]

Hello Nalinakumar,
You need to define Transaction Launcher Logical systems and URL's in
IC->ICWebclient>Administration->System Parameters->Define Transaction Launcher Logical systems and URL.
You need to configure activities
CRM->IC Webclient->BasicFunctions-->Transaction Launcher->Define URL's and Parameters.
Configure Transaction Launcher.
regards,
Muralidhar Prasad Chatna

Transaction launcher parameter not handed over to ERP system

Hi experts,
We generated an R3 transaction launcher via the wizzard. We try to hand over the BP_NUMBER to the ERP system.
This does not work. The entitiy collection in the gdc is not filled.
Actually it gets the gdc form the view controller of the action box view (GV_VIEW_CONTROLLER->VIEW_ID = UICMP_LTX/ABoxExecution). See also the coding below.
method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW.
data: __gdc    type ref to if_crm_ui_data_context,
        __source type        string,
        __line   type        string,
        __path   type        crmt_ic_ac_identify_path.
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
********** Begin of parameter declaration ***********
data ICWCPROCESSEDOBJECT
type ty_ICWCPROCESSEDOBJECT .
data BP
type ty_BP .
data ICWEBCLIENTBORKEYPARAMETER
type ty_ICWEBCLIENTBORKEYPARAMETER .
concatenate
space
'CURRENTCONTACT/BuilContactPersonStandardAddressRel/BP_NUMBER'
into __source.
     if __gdc is bound.
       try.
           call method __gdc->GET_ENTITY_ATTRIBUTE_AS_VALUE
             exporting
               path = __source
             importing
               value = BP .
         catch cx_crm_bdc_no_data cx_crm_bdc_xpath_error cx_root.
           clear BP .
       endtry.
     endif.
me->set_container_data(
   iv_name = gc_BP
    iv_value = BP ).
* Data flow is complete - set to false if data is missing
gv_data_flow_complete = abap_true.
endmethod.
Please help if you have any ideas.
Regards,
Thea

Hi Thea,
a stupid question, did you confirm the customer previously?
what happens, when you use the following coding to get current customer?
*   get confirmed customer of GDC
    TRY.
        lo_customer = __gdc->get_entity( if_iccmp_global_data_cont_con=>gdc_currentcustomer ).
        BP = lo_customer->get_property_as_string( 'BP_NUMBER' ).
      CATCH cx_root.
    ENDTRY.
maybe this will help...
best wishes,
Hakan

Transaction Launcher - TCode Authorization Issue for ERP transaction

We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher. Everything has been set up properly and the transaction appears in the nav bar. I am running it to launch a new window. When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
*"You do not have authorization to view transaction ZSD_IC".*
Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
Does this have anything to do with IC_LTXE? Is there anything special i need to do to assign proper authorization to this user.
Thanks,
jeremy

Hello Jeremy,
We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
In order to execute transactions from TL we have copied object TSTC to ZTSTC in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
In order to correct the fail we have implemented these notes, but the problem still remains.
0001224663 Launch of Front Office with Transaction Launcher fails
0001263716 Launching Front Office Process using Transaction Launcher
Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
Thank you very much in advance.
Best regards.

Logical System-Transaction Launcher-CIC WebClient

Hi Gurus
I am new to CIC WebClient. Today I started working on Transaction Launcher in it. Where I am calling a BOR Method(Service Order Creation) from the back-end ECC system. Now When I try to access it through WebClient, it is giving an error related to logical system.
I have done mapping for Logical system, but I have left the table entries for ITS server blank. We are using CRM 5.0, so as per my understanding these entries wouldn't be required.
Please help me in resolving this.
Thanx in advance.
Cheers
Hits

Hi,
Try this..
To maintain RFC destination in each business role, there is one functional profile "ERP_SALES_ORDER" where in you can maintain respective rfc destination.
Create z-functional profile's for "ERP_SALES_ORDER" and maintain corresponding rfc destination, later assign these erp sales order function profiles in respective business roles trxn (CRMC_UI_PROFILE).
you can use the below statement to fetch rfc destination whcih assigned to business role via functional profile.
If gv_rfc is INITIAL.
gv_rfc = CL_CRM_IC_ERP_SERVICE=>GS_ERPPROF-RFCDEST.
ENDIF.
Hope this helps.
Cheers,
Sumit Mittal

Open ERP transaction within CRM 2007 using wizard for transaction launcher

Hello everybody,
I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
Any help is highly appreciated.
Thanks lot and kind regards,
Franziska

Hi,
The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
Remember, for sucessfull transaction Launcher Configurations,
1) The client in which WEB UI Runs
2) The Logical System mapping and client mentioned in ITS url
3) The client is which you created the BOR object.
4) The client on which you are configuring transaction launcher wizard
ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
For example,
If my WEB UI is on client 200 of development system,
then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
Hope this helps.
Thanks & Regards,
Suchita

Dynamic Determination of Logical System- Transaction Launcher

Hi Friends,
Need your suggestions and inputs on how to dynamically determine the logical system for the transaction launcher.
Our system landscape is like this.
We have one CRM connected to mulitple back end ECC Boxes. Currently, we have created separate TL's fo VA01 ( One each for each back end application ) and provided the same in logical link and controlled the same via business role.
For eg: BROLE1 - LLINK1 having (TL VA01) pointing to ECC System1
BROLE2 - LLINK2 having (TL VA01) pointing to ECC System2
BROLE3 - LLINK3 having (TL VA01) pointing to ECC System3
The above procedure is working fine. But what we are trying to do is, when the end user clicks on the TL link in WEB UI, Based on the assigned business role, it should dynamically determine the back end system and open the VA01 Screen in that system.
I have activated indicator multiple systems in the customizing of mapped logical systems.
In debugging mode, i have tried changing the LOGSYS value @ run time in the handler class.
Any pointers on this would be of great help.
Thanks,
Madhu

Hi,
Try this..
To maintain RFC destination in each business role, there is one functional profile "ERP_SALES_ORDER" where in you can maintain respective rfc destination.
Create z-functional profile's for "ERP_SALES_ORDER" and maintain corresponding rfc destination, later assign these erp sales order function profiles in respective business roles trxn (CRMC_UI_PROFILE).
you can use the below statement to fetch rfc destination whcih assigned to business role via functional profile.
If gv_rfc is INITIAL.
gv_rfc = CL_CRM_IC_ERP_SERVICE=>GS_ERPPROF-RFCDEST.
ENDIF.
Hope this helps.
Cheers,
Sumit Mittal

ERP Transaction Launcher leads to blank screen

Hello
I followed SAP notes and various threads here at SDN to setup launch of ERP transactions from CRM webclient.
In principle I have applied SAP notes on ERP and CRM for IC_LTX and IC_LTXE transaction codes and also did all steps as per enclosed blog,
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
However when I launch the transaction, I get SAP Logon prompt from ERP server as expected. When I enter credentials correctly, I get an embedded window with SAP GUI menu (only two options Menu and System and field to enter Tcode) and empty screen area .
Now if I enter he tcode in opened empty window say "/nva03" , I am able to start the transaction.
Any clues on why the transaction does not launch correctly?
Thanks

Hi,
I get the same problem, but it gets back to CRM. I think the problem is that http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?*transaction=IC_LTXE*&okcode=ICEXECUTE
transaction=IC_ICLTXE should be replaced by the transaction ex: VA01 and it is not.
Tell me if you have any clue.
Tx
Thomas

Logical System for Transaction Launcher??

Dear all,
Should we define logical system for Transaction Launcher to call transactions from back end ECC system. If yes, why we do this and where we maintain the logical systems?
Can we use existing ECC logical system, whcih mapped with SAP CRM system?
Where can we define the logical system for Transaction Launcher?
Please clarify my doubts to complete this process successfully, your suggestions will be highly appreciated.
Thank you
Raghu ram.

Hi Raghu Ram
In order to call an transaction from ECC, you should choose the logical system of the ECC System itself. You will get the information regarding the logical name assigned to your ECC System using the tcode SM59. The logical system must have been defined for the ECC System before you integrated CRM to backend ECC.
Check the tcode SM59 and you will find logical name of your ECC System there.
And yes, you are suppose to use the existing ECC logical system, which is mapped with SAP CRM system.
Hope this helps
Regards
Rekha Dadwal

Using transaction launcher to connect CRM 7.0 to a CRM 6.0 system

Hello Experts,
We are considering integrating two IC Web client applications one on CRM 6.0 and the other on CRM 7.0 as transition step before the two systems are fully integrated.
We would like to create a transaction launcher transaction in CRM 7.0 that takes the user to Interaction History bsp page in CRM 6.0. Is there a simple way to do this using transaction launcher?
Best Regards,
Tom Halloran

Hi,
You can use the transaction launcher and the transaction launcher profile, which is part of the IC WebClient profile, to start SAP GUI for HTML transactions via the Internet Transaction Server (ITS) from both Enterprise R/3, SAP CRM transactions from SAP CRM. Starting from CRM 4.0 Add-on, you can use transaction launcher to launch URL and front-office based transactions also.
Agents have access to launch transactions from the IC WebClient navigation bar.
In your case you can include the link for you CRM 6.0 from CRM 7.0 can be grouped under workcenter link group or direct link group of a navbarprofile.
regards,
Muralidhar Prasad.C

Transaction Launcher in system ERP 6.0 EIC

Similar Messages

Maybe you are looking for