Transaction listing for default "Current Settings" transaction codes in IMG

I am trying to create a succinct list of the transaction codes used to access "current setting" functionality throughout the IMG.  More specifically ones for HR/Payroll related tasks.
We are trying to implement a super user program where we hand off as much of the customization and maintenance of the system to the business.  In do this I wanted to get a list of the transaction codes that are already set up as defaults by SAP so we can immediately implement this while we are activating other functions.  We are on ECC 6.0 so the CUSAMEN table is no longer relavent to our situation and of the notes from SAP do not address how to do this.
I have looked in the OBJH table and it lists all the objects that are flagged as "current setting" objects and it also indicates whether they are transaction codes, views, tables etc.  The transaction codes obviously do work but tables and views shown as objects but no t-code to execute the update.  I know there must be a key or way to link the Object to the transaction code created for it in SE93 but can't seem to find it.
Any help or insight as to how to do this would be greatly appreciated.
Regards,
Bill

Thank you Shahram for your reply but I'm still not getting the results I'm looking for.  For example, the transaction S_AHR_61000061 is used to change or View Tax Authorities per Resident Tax Area and is basically SM30 editing the table T5UTZ. 
When I search for that transaction code in TSTCP using SE16 I can't find it.  I I also can't find any references to any of the other tax tables such as T5UTA and T5UTR.  When I look in the IMG, under Display IMG Activity and Maint.objects the assigned objects are showing T5UTZ being assigned to SM30 as a transaction with a subobject of 01.
Is there another table that lists transactions and Objects?
Thanks again.
Bill

Similar Messages

  • Check List for TTE Basic Settings

    HELLO guys..
    Can anybody send the check list for TTE Basic settings
    Thanks in advance
    Regards
    vamshi

    Yes I have. At this point, that's all I have. I can't change any settings via Computer since the computer doesn't seem to know that the AX exists.
    Any other ideas?

  • Transaction List for SRM Support

    Hello Experts,
    We are going live very soon on my project and for support activites basis guy will create a custom role, So we need to list down all standard t-codes in SRM to solve future problems and we need to provide that list for creating a custom role.I try to create one list but if you experts provide me  then i ll be sure of it
    Thanks!!
    Sunny Sharma

    Hi Sunny,
    I thoucht you only need administration roles.
    If you also would like to use the application transactions as well, please see the the following roles:
    /SAPSRM/BIDDER
    SAP_BC_WEBSERVICE_DEBUGGER
    SAP_BW_DEVELOPER
    SAP_CFX_USER
    SAP_SLD_DEVELOPER
    SAP_SRM60_BIDDER
    SAP_SRM70_BIDDER
    /SAPSRM/EMPLOYEE
    /SAPSRM/OP_PURCHASER
    /SAPSRM/ST_PURCHASER
    SAP_EC_BBP_PURCHASER
    /SAPSRM/MANAGER
    SAP_BBP_STAL_PURCHASE_MANAGER
    SAP_BC_BMT_WFM_UWL_END_USER
    SAP_BC_UWL_END_USER
    SAP_QAP_DEBUG_AUTH
    SAP_SRM70_MANAGER
    /SAPSRM/ACCOUNTANT
    SAP_SRM70_ACCOUNTANT
    in case something is missing, use the SU53 for finding the object/activity.
    Reagrds,
    Peter

  • Create transaction custom for report created with transaction IME1

    Hi,
    I created a report custom for investment management with transaction IME1.
    Now, I have to link this report to a transaction custom.
    Please, could you help me?
    THanks
    Regards

    se93 type a new Z tcode and create new.. from the drop down list select "program and selection screen (report transaction)"
    go back to your report screen from menu; "system --> status" and get the program name for the report.
    type this report to the se93 screen for the t.code. and save...

  • Sensitive Transactions List for Production System

    We are looking for a comprehensive list of sensitive transactions (e.g. SE38, SE37, LSMW, etc) that should NOT be assign in Production environment. Transactions that will trigger audit violation in PRD environment. Hopefully with documentations or whitepapers to backup this list.
    Thanks,
    Lye

    They could only access data from SE16 if they have the corresponding s_tabu_dis activity for the authorization group to which that table has been assigned.
    If the auth group is not maintained, SE16 will assign the value '&NC&' to it and check it.
    If granting s_tabu_dis for other tables sharing the same auth group is inappropriate, then these can be re-assigned in transaction SUCU.
    I still don't see where SE16 or SM30 itself are problems if the user has correct authorizations.
    Infact, if a user must view / maintain a table, it is much safer and cheaper to use SE16 / Sm30 than re-invent them and hardcode the table name.
    *       FORM AUHTORITY_CHECK_AGAIN                                    *
    FORM AUTHORITY_CHECK_AGAIN USING ACT.
      GLOBAL_AUTH = 'SHOW'.
      SELECT SINGLE * FROM TDDAT WHERE TABNAME = DATABROWSE-TABLENAME.
      IF SY-SUBRC <> 0  OR  TDDAT-CCLASS = SPACE.
        TDDAT-CCLASS = '&NC&'.             " 'non classified table'
      ENDIF.
    * Anzeigeberechtigung
      AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
               ID 'DICBERCLS' FIELD TDDAT-CCLASS
               ID 'ACTVT' FIELD '03'.
      IF SY-SUBRC NE 0.
        MESSAGE E419 RAISING NO_PERMISSION.
      ENDIF.
    * Änderungsberechtigung
      AUTHORITY-CHECK OBJECT 'S_TABU_DIS'
               ID 'DICBERCLS' FIELD TDDAT-CCLASS
               ID 'ACTVT' FIELD '02'.
      IF SY-SUBRC = 0.
        GLOBAL_AUTH = 'UPDA'.
      ELSE.
        IF ACT = 'ANLE'.
          MESSAGE E417 RAISING NO_PERMISSION.
        ENDIF.
      ENDIF.
      IF DD02L-CLIDEP EQ SPACE.
    *  Mandnatenunabhängig
        AUTHORITY-CHECK OBJECT 'S_TABU_CLI'
                        ID 'CLIIDMAINT' FIELD 'X'.
        IF SY-SUBRC <> 0.
    *      Keine Berechtigung für mandantenunabhängige Änderungen
          GLOBAL_AUTH = 'SHOW'.
          IF ACT = 'ANLE'.
            MESSAGE E417 RAISING NO_PERMISSION.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM.

  • Report Listing for GL account with tax code assiociated with it by company

    Hi expert,
    Would like to seek for help does SAP have any standard report to list down all the tax code (with description) with the related GL accout by company code?
    Please help.
    Many thanks.
    KH

    Hi,
    Thank you for your reply.
    Do you have any ideas any report will be able to list all the define tax code for the related GL account not by posting document.
    Please advice.
    Many thanks.
    KH

  • Not showing transactions for creating follow up transaction for service tic

    Hi,
    I created copy copy control settings for transactions for service ticket.initially i created service ticket and saved the document.after that i clicked on follow up button and i am trying to selct transactions.but i am not able to see any transactions in drop down list for creating floow up transactions.
    i am able to see in gui but i am not able to see in ic
    Thanks & Regards
    Kishore Kumar

    You need to do also this:
    1. Activate Copying Control of Activities
    CRM - Transactions - Settings for Activities - Activate Copying Control of Activities
    This will cause that only transactions defined in your Business Transaction Profile are visible in dropdown list.
    and...
    2. Define Copying Control of Transaction Types
    CRM - Transactions - Basic Settings - Copying Control of Transaction Types - Define Copying Control of Transaction Types
    Here select Source Transaction and choose Target Transaction.
    Save and it's done.
    Edited by: drabas on Apr 7, 2010 5:58 PM

  • REG copy of transaction variant for VA01

    Hi,
    I need to copy transaction variant for VA01
    After copying transaction variant
    i tried to copy screen varaiants for 4440 its working fine  but for screen 4480 the fields which are to be invisible is not working
    i  tried to use same screen variants still not working
    please suggest if any customization needs to be done.
    thanks ,
    kamalakar

    Hi,
      I guess you don't have assign the transaction variant in TVAK.
      Instead you could have created the z tcode by using the option "transaction with variant(variant transaction)" and given the transaction variant.
    Thanks
    Naren

  • User Exit for default values in IW51

    Hi All,
    Can any suggest User Exit or BADI for default values like Cause code in IW51 Tcode.
    Regards,
    Samatha.

    Hi,
    Please check these
    Exits
    IWO10026                                User check on setting status 'Do not perform'
    IWO10027                                User exit: Generate user-defined settlement rule
    IWOC0001                                Create PM/SM notification: Determine reference object
    IWOC0002                                PM/SM notification: Check whether status change is allowed
    IWOC0003                                PM/SM authorization check of ref. object and planner group
    IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
    Business Add-in
    IQS_MASS_CHANGE                         BadI for Mass Changes to Notifications
    IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
    NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
    WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
    IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
    IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
    IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample

  • N8 Configurat​ion Settings PIN code message since ...

    Ever since updating to Anna on my N8, i keep getting a msg asking for a Configuration settings PIN code when connecting to my bluetooth handsfree carkit. Where can i get this pin from?

    @theforum71
    Perhaps you could post which car manufacturer this is as undoubtedly there have been Bluetooth carkit connectivity issues with Nokia Anna for some users, although "pairing" is not usually one of them.
    Happy to have helped forum with a Support Ratio = 42.5

  • Transaction Variant for T. Code - FBL1N

    Hi,
    I want to create a Transaction Variant for T. Code - FBL1N.
    Actually, My requirement is that I want to give a Dynamic Selection "Reconciliation acct-XXXXXX"... After Create  the variant for this, i want to disable the Dynamic Selections Icon. I want both things at a time..
    Please tell...
    Regards....

    Hi,
    Even though question is already marked as answered, I think that Pince Kummar requirement was not fulfilled.
    Those are the steps that you should execute:
    1. Create a Selection Variant:
    In FBL1N transaction, enter your required field values, and click on the save icon. Maintain variant attributes as you need. Assign to your selection variant a name beginning with CUS&. With that prefix you specify that is a customer system variant.
    2. Assign the created selection variant as default for tcode FBL1N.
    Go to SE93 and change FBL1N, on "Start with variant" field select your created CUS& variant and save.
    At this time you can notice that FBL1N transaction always begin with your selection variant.
    3. If you also want to disable Dynamic selections function, you should create a Standard transaction variant.
    Go to SHD0, enter the transaction code name (FBL1N). In the Standard Variants tab enter a name and choose create function. Automatically FBL1N selection image will be showed, click back button to return. In the screen that now is showed, choose "Menu Functions" and enter Program "RSSYSTDB" and gui status "%_00" and click Menu Functions, then in the tree that come out, find and select Dyamic Selections function (%_00->Edit->DYNS), next click disable button and then continue button.
    Now you return to Transaction variants maintenance screen. Make sure that in deactive functions list, for Dynamic selections function is only active "For Transaction" check box. Now save and activate your transaction variant.

  • How to get all the approver list for a particular transaction in iExpense

    Is there any API to get all the approver list for a particular transaction in iExpense workflow after submitting an expense report?

    Hi All,
    Could anyone please let me know API to get all AME approvers in one go.
    I am currently using below API to get approver list.
    ame_api.getallapprovers (applicationidin => 201 , -- PO
    transactionidin => l_document_id , -- req header id
    transactiontypein => 'PURCHASE_REQ'
    ,approversout => l_appr_list
    But if any of the approver is INACTIVE then API is going into exception and not showing all approvers. Requirement is like to show all approvers with their statuses (ACTIVE / INACTIVE).
    Reply ASAP.

  • Creating a query that provides a default transaction type for those transactions not categorized?

    How could I create a query that provides a default transaction type for those transactions not categorized?
    So assuming I have:
    * Transactions table (with transactions)
    * Categories table
    * transactions_categories table - allows to allocate multiple categories (with a percentage)
     - tranactionID
     - categoryID
     - percentageAllocation
    * Usage is such that only non-personal categories have been applied through out data.  So there is a lot of transactions with no categories applied
    Aim:
    * Want to create a query that creates a list of all the allocated amounts, so would include as columns:  transaction.tDate, transaction.tTitle, categories.name, allocatedAmount(calculated from percentage * transaction amount)
    BUT:
    * How could I include in the query, the entries that cover all transaction that haven't been allocated, to a default category "personal", where the allocated Amount would be 100% of the transaction value
    * And also (if it were possible), for transactions that have been categorized but not for the complete transaction value (say only 50% was allocated to a category), how to to cover this off to.  

    To default the value of the category:
    select IIf(IsNull(Category),"Personal",Category) as Category,IIf(IsNull(Category),"100%",PercentageAllocation
    ) as PercentageAllocation from [yourtable]
    What do you want to put the values of these ones:
    And also (if it were possible), for transactions that have been categorized but not for the complete transaction
    value (say only 50% was allocated to a category), how to to cover this off to.  
    Fouad Roumieh

  • Transaction Variant for a standard report without transaction code

    Hi,
    I want to create a transaction variant for a executable report. The report has some subscreens 100, 110 etc. I want to hide the subscreen through transaction variant. So I have created a transaction code (Y*) for it and then tried creating transaction variant using SHD0 transaction.  But the fields are not listed to choose invisible or other options. Please advice

    The fields are listed when you leave each recorded screen. You have the flag "do not display the screen". It's strange you don't have anything, are you sure you started the recording? (you enter the transaction code, the transaction variant, you click the Create button and the screens are displayed and recorded)
    Which transaction is it?
    A little remark (about your last posts): forum rules ask people to give points, it's a way to say thank you. Otherwise, people won't help you anymore. It's not a black and white logic : don't give points only when your problem is solved. Give 2 or 5 points to thank people (or 0 if it's out of context). Thanks.

  • Configuring profiles for transaction EXPD/AXPD and how the t-codes work

    Hello experts!
    I inadvertently ran across these transactions recently and (based on descriptions) want to explore its functionality further for my current client.  However, in their systems there is no Progress Tracking Profile configured, preventing me from executing.
    I've seen previous posts that indicate there should be an IMG node located in the MM>Purchasing path but I cannot locate it in this client's system.  Those same posts indicate an alternate node in Project Systems to configure this, and I do see it there.
    Is there a business function in the Switch Framework that has to be activated in order to create this node in MM or is this functionality specific to an industry solution?
    Again, have no idea if this transaction would be of use to them.  They do indeed use Project Systems, but I'm not understanding what these transactions do and am having extreme difficulty locating any useful documentation on them.
    Any guidance you can lend would be greatly appreciated.
    Thanks
    Jason

    Hi
    I know that but the Sales Document filed is not there in that T.code. Thats the problem.
    Regards
    Rajaram

Maybe you are looking for