Transaction MB5B takes not into account the archived material documents

Transaction MB5B takes not into account the archived material documents . Is it possible?

Hi
It is not possible to see the archieved materials. Once archieved it will remove from the registry. Cannot be retrieve back.
Thanks
Ganesh

Similar Messages

HS.EXP does not take into account the Value member and the source

Hello,
The formula is put in the "Entity Curr Adjs" part of the Sub Calculate.
The expression is the following and apply for one entity (Holding method) I filtered previously and the ICP Entity has proportionnal method with 50% rate:
HS.Exp "A#5420.I#[ICP None].C1#REC.C2#[None].C3#[None].C4#Recla_IAS_Aut_RetS_5=
A#5340.V#[Contribution].E#Logista_E_TBCO.I#UTE_O.C1#CLO.C2#TotC2.C3#TotC3.C4#TotC4"
The data I would like to retrieve is the one in Contribution Value as I put on the source part of the expression.
And yet, the data I get is the one of the Entity Currency and Proportion Value, which is different because the ICP has proportionnal method (50%) and the Contribution value is the result of Proportion - Elimination values.
To sum up: I obtain a data of 50 instead of 25.
I checked that the data I see in my form corresponds to the source parameters but it seems that it does not take into account the Value parameter.
Could it be that it is not possible to use a Contribution Value source for an Entity Currency Adjs destination?
Thanks in advance.
Regards,
Julien

Hi,
I see another problem in what you're trying to do. First, let me state what you're trying to establish: you are trying to get a value from one entity (say A) to another entity (say B), be it at [Proportion], [Elimination], [Contribution], ...
My question is: how can you know that during the consolidation process, by the time your code runs on B, A has already been processed and [Proportion], [Elimination] are not empty (or contain values from a previous consolidation run)?
The answer is "You don't". Theoretically, you have no control as per the order in which entities are calculated/consolidated during the process. Even more complex is the thing that if you have a multi-core machine, more than one entities may run in parallel, but still you cannot force A to run before B. I have done some tests and I've seen that in a one processor setting the order that entities enter in the process of consolidation matches the order you have placed them in the consolidation tree in metadata. Still this thing is not documented as far as I know and therefore you cannot rely on this.
Finally, I have also seen that in a simple case (B pulls from A), if you run consolidation twice, then you definitely get correct values. By the time you make a change in A, you have to run consolidation twice again to make sure that you get the correct data. I believe that you see that what I'm describing is good for experimenting but not for releasing to a client.
I tend to think of such a design, as a practice to avoid.
--Kostas

Build thumbnail image does not take AnalogBalance into account

When I build a thumbnail, it does not take AnalogBalance into account.
dng_image_preview thumbnail;
dng_render render (host, *negative);
// Build stage 2 image.
negative->BuildStage2Image (host, ttShort);
// Build stage 3 image.
negative->BuildStage3Image (host, ttShort);
render.SetFinalSpace (negative->IsMonochrome () ? dng_space_GrayGamma22::Get () : dng_space_sRGB ::Get ());
render.SetFinalPixelType (ttByte);
render.SetMaximumSize (256);
thumbnail.fImage.Reset (render.Render ());
thumbnail.fImage.Get()->Rotate( dng_orientation::Mirror90CCW() );
thumbnail.fInfo.fColorSpace = thumbnail.fImage->Planes () == 1 ? previewColorSpace_GrayGamma22 : previewColorSpace_sRGB;

The AnalogBalance is going to affect the mapping between temp/tint values and camera neutral values. If the white balance values are already stored as camera neutral values, I would not expect it to significantly change thumbnail rendering.
It sounds like you do not understand AnalogBalance correctly.

[svn:osmf:] 14601: Fix bug where parsing of stream that gets passed to NetStream.play doesn' t take urlIncludesFMSApplicationInstance into account, resulting in stream not found error.

Revision: 14601
Revision: 14601
Author:   [email protected]
Date:     2010-03-05 09:47:28 -0800 (Fri, 05 Mar 2010)
Log Message:
Fix bug where parsing of stream that gets passed to NetStream.play doesn't take urlIncludesFMSApplicationInstance into account, resulting in stream not found error.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamUtils.as
    osmf/trunk/framework/OSMF/org/osmf/net/dvr/DVRCastNetConnectionFactory.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamUtils.as

I had a while ago similar problem with USB memory stick. At the end, I don't know why, just formatting it using WinXP helped me.
S-
Last edited by StenM (2011-07-22 17:56:32)

[svn:osmf:] 11242: Updating the Flex project file to take into account the NetStreamContentProtectableTrait 's name change.

Revision: 11242
Author:   [email protected]
Date:     2009-10-28 13:26:52 -0700 (Wed, 28 Oct 2009)
Log Message:
Updating the Flex project file to take into account the NetStreamContentProtectableTrait's name change.
Modified Paths:
    osmf/trunk/framework/MediaFramework/.actionScriptProperties
    osmf/trunk/framework/MediaFramework/.flexLibProperties

Hi,
This topic seems to be related to VBA coding, better to post your question to the forum for Excel Developer
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Tony Chen
TechNet Community Support

[svn:fx-beta1] 7038: Updating Gumbo webtier packaging to take into account the Flash Player 10 requirement , MXML 2009 namespace changes and associated manifests, and new locales.

Revision: 7038
Author:   [email protected]
Date:     2009-05-18 09:31:29 -0700 (Mon, 18 May 2009)
Log Message:
Updating Gumbo webtier packaging to take into account the Flash Player 10 requirement, MXML 2009 namespace changes and associated manifests, and new locales.
QE: Yes, I tried checkintests with the webtier.war distribution and could successfully compile the associated apps. Please test the webtier.war distribution with the larger suite of webtier tests.
Doc: No
Checkintests: Pass
ant package: Successful
Reviewer: Paul
Modified Paths:
    flex/sdk/branches/beta1/modules/webtier/j2ee/coldfusion/build.xml
    flex/sdk/branches/beta1/webapps/webtier/WEB-INF/flex/flex-config.xml
    flex/sdk/branches/beta1/webapps/webtier/build.xml

HT1918 Hi Mrs Gideon ,i just wanna tell you my Bank said i don't have nothing wrong with my card so I think the problem is with my iPhone! So I you can help me and how I'm gonna do to be refund for my money they take on my account( the 9 differents type o

Hi Mrs Gideon ,i just wanna tell you my Bank said i don't have nothing wrong with my card so I think the problem is with my iPhone! So I you can help me and how I'm gonna do to be refund for my money they take on my account( the 9 differents type of 5.96$

I don't know who 'Mrs Gideon' is, but we are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If you have previously contacted support then you can use the same method that you used last time, and, if you have a case number, include that as well
iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Import failed, because the sources are not contained in the archive

Hi,
I need to customized some configuration in the Component CPRXRPM_UI.
So I have created a Track to Modify the CPRXRPM_UI Component. When I am trying to Import the Compoent I am gettting the below error,
20090625182941 Info   :Starting Step Repository-import at 2009-06-25 18:29:41.0130 +5:00
20090625182941 Info   :Component:sap.com/CPRXRPM_UI
20090625182941 Info   :Version :MAIN_PPM45VAL_C.20080919144429
20090625182941 Info   :1. propagation request is of type TCSSoftwareComponent
20090625182941 Fatal :import failed, because the sources are not contained in the archive
20090625182941 Info   :Step Repository-import ended with result 'fatal error' ,stopping execution at 2009-06-25 18:29:41.0131 +5:00
Can any one suggest the solution for the issue

Hi Baskar,
I am facing the same issue.
Wondering if you have figured out a way.
Please let me know what you did to achieve the desired result.
Regards,
Sumit Oberoi

Uncategorized , the document "ViewController.xib" could not be read , the archive could not be opened

Dear Friends ,
i am using xcode 4.3.2 on snow leopard 10.6.8 , i have updated patches to the system ,
now i am trying to build very simple app that contains one label , a button and a date picker .
when i exclude the date picker everything compiles but when i add a date picker i am getting the following error during the compilation process and my application won't compile properly
Uncategorized , the document "ViewController.xib" could not be opened , the archive could not be read .
i am just wondering what is exactly the problem behind that ,
note , i have removed xcode completely and i reinstalled it but i am still getting the same error.
any help would be highly appreciated from all of you.
best regards

Hey hi,
Remove the reference of your ViewController.xib from your project and try to add it again from your project folder. It may works for you.

[svn:fx-trunk] 5121: Fixing generated SymbolClass class names to take packages into account during FXG - SWF conversion.

Revision: 5121
Author: [email protected]
Date: 2009-03-01 19:08:01 -0800 (Sun, 01 Mar 2009)
Log Message:
Fixing generated SymbolClass class names to take packages into account during FXG -> SWF conversion.
QE: No
Doc: No
Checkintests: Pass
Reviewer: Discussed with Corey
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/TextFXGGraphics.java

Creation of DMR and CMR from the archived billing document in EHP3 system

Hi all
I read somewhere that one of the functionality in EHP3 is we can create sales document like debit memo request and credit memo request from the archived billing document. I am working on EHP3 system only but i am not able to create the sales document. the system throws an error that billing document doesnt exist
If any one of you have worked on such functionality kindly suggest me why its not happening here also let me know Is ther any customization required for the execution of this functionality in spro.

> If any one of you have worked on such functionality kindly suggest me why its not happening here also let me know Is ther any customization required for the execution of this functionality in spro.
I suggest you open that question in an SD forum together with the support package you run and if you have an industry solution or any business function sets activated or not.
Markus

Creation of sales document (DMR, CMR) from the archived billing document

Hi all
I read somewhere that one of the functionality in EHP3 is we can create sales document like debit memo request and credit memo request from the archived billing document. I am working on EHP3 system only but i am not able to create the sales document. the system throws an error that billing document doesnt exist
If any one of you have worked on such functionality kindly suggest me why its not happening here also let me know Is ther any customization required for the execution of this functionality in spro.

hi,
the help says:
You can use this business function to further optimize your electronic Sales and Billing Processes.
Electronic data archiving regulations result in a high volume of data for sales documents and require invoices to be archived at an early stage. You can integrate archived billing documents in your business processes more easily. Since you still have electronic access to archived invoices during the sales process, you can manage archiving without delay and execute further sales processes electronically.
You can more efficiently use the rebate agreements from SAP ERP for your marketing activities. In particular, customers who use SAP CRM (Trade Promotion Management) with a large volume of data for campaigns, target groups, and product segments can define a custom-made logic for their rebate determination and thus avoid potential database problems.
Integration
To implement the logic for rebate processing in SAP ERP, you use the Enhancements for Rebate Processing Business Add-In (BAdI). For more information, see the Implementation Guide (IMG) under Sales and Distribution Billing Rebate Processing Business Add-Ins (BAdIs) Enhancements for Rebate Processing .
Prerequisites
You have activated the Logistics: S&D Simplification (SD_01) business function.
Features
You can integrate archived billing documents in your business processes as follows:
Create sales documents with reference to archived billing documents, such as credit memo and debit memo requests.
Display archived billing documents.
When you do either of these steps, the system first looks for the invoice in the database and then in the archive.
For the sales employee, the processing steps are identical, regardless of where the sales document is stored. As soon as the sales employee processes an archived billing document, they see the relevant information in the message line as well as in the title of the function.
For rebate processing, you can store your company's check logic in the interface of the Business Add-In (BAdI) Enhancements for Rebate Processing.
So check if you have activated the business function.
I hope this helps.
Balazs

Cancel Archived Material Document

Hi Experts
I have scenario, where I need to cancel a Material document(PGR ref to a delivery) which appears to be archived. I was archived by the system, due to an update termination error, following some conversion issues in material master.
How can I cancel this archived material document
thanks & regards
Vin

your question is not clear
if a material document is already archived (deleted physically from the tables), then you cannot cancel it, as you can only cancel what is available.
In this case you would need to perform a new movement using the cancellation movement type, but without reference to a material document.
I was archived by the system, due to an update termination error,
this is just impossible. Archiving is only done by execution of certain transaction, but not by termination of postings.
If the update has terminated, then the movement has never been in your system, hence you dont need to cancel it.

Not able to create a material document with movement type 103

I am not able to create a material document with movement type 103,
The system is populating the value as 101 .
How do I create a matdoc with movement type 103?

What is the error you receive? Please specify with message number.
On MIGO, you need to change the default value mvmt type value to 103 before you enter the PO number to be able to do 103.
Once this defualt value is set, you can enter the PO and item number in the document number fields and proceed with 103.
But you cannot change the mvmt type for already entered items from 101-103 or vice versa.
I think the 101-103 and 103-101 mvmt type conversion message is standard error message

CO account assignment for material document.

I have a material document successfully posted in which the account assignment screen for a material contains only the order field. This order field is also filled up.
But when i want to reverse this document by using the MIGO cancellation option, the system throws error as "A CO account assignment is needed" for the material line. However the order field is already filled up as i said earlier.
If the system has allowed this material document to be created initially with only the order field as the CO account assignment, why is it throwing an error when reversing the same material document?

Hi,
What is the particular error message number did you get?
Cheers,
HT

Transaction MB5B takes not into account the archived material documents

Similar Messages

Maybe you are looking for