Transaction mmpv incorrect period in control rec
transaction mmpv close period for material master record
i enter company code 4000 period 07 fy 2004
check and close period
i get specified year is not the current year when i execute
in the log i get
incorrect period in control rec cocd 4000current period of the control record is 07 2004.
what am i doing wrong?
Hi Janice,
Check this thread.. It has ur answer..
Quarry in Posting period
cheers,
Prashanth
P.S Please mark helpful answers
Similar Messages
-
Incorrect period in control rec. of CoCd HITA; no conversion
Hi All
While changing the posting period in GR creation, I am getting the below error:
Incorrect period in control rec. of CoCd HITA; no conversion
The current period (month/year) of the control record is122006
Seeking for expert's help.
Regards
Vidyahi ,
one thing u have to do, go to t-code mmpv or obyc
company code -
period- 08.09 (like month)
fiscal yaer -2009
execute, -
Changes management in transaction MMPV - Closing Period
Hey gurus,
We need to check changes in transaction MMPV (user, time, change...)
Any idea?
Thanks,
VLHi,
Pls check the table MARV in transaction code SE16. You will get the required details.
Regards,
Edited by: KANAKARAJ BALASUBRAMANIAN on Jun 29, 2010 2:06 PM -
Program mmpv wrong period filled in.
I got a problem with the periodes. In program mmpv I did do something wrong. The date I put in was 30/07/2008 instaed of 30/06/2008. So at the moment the periode that is open is periode 09 not periode 08.
And it has to be 08.
Can you change the mmpv into periode 08.
Mmpv ( now the result is : ) our current period has to be 08/2008 not 09/2008
Close Period for Material Master Records
L O G
Mode: Check and close period
Client: 623
Period entered (month/year): 08 2008
Incorrect period in control rec. of CoCd 0754; no conversion The current period (month/year) of the control record is 09 2008
Period closing complete; log issued.
Please can you change the period in the period 08/2008
Edited by: Ian Wong on Jun 30, 2008 6:26 PMChange the period from 09 to 08 using MMPI transaction.
Follow the instruction in SAP Note 487381.
Maintain parameter (SU01/ SU2/SU3 t-code) MMPI_READ_NOTE with current date as paramter value in YYYYMMDD format before using MMPI transaction.
All users using MM -period related transaction must either stop using the transaction or log out. -
In correct period in control record
hi sap experts
1. posting only possible in period 2002-11 &2002-10 in co. xyxy
as i was sugested by u i have tried mmpv
now the problem is msg comming incorrect period in control record for co cd xyxy. so no conversion the current period of the control record is 12-2002
pls throw some light on this
thanks in advancehi,
Firstly check the open periods for the compnay code in OMSY...
If its not open then try in the MMPV to open it...
You can also open it in OB52..which is FI trasaction...it open/close the two periods consicutively...
You can reopen the periods but its not recomended...you can use MMRV..for back posting allowed...
or else check this
goto SU3
select user profile
in parameter ID give MMPI_READ_NOTE , and in parameterr value enter todays yyyymmdd and save.
and goto MMPI intialise the periods to present one at a strech. -
MMPV - Close period - How to create a variant
Hello all,
Transaction MMPV is used to close the MM period and open a new one. Currently, we run this transaction every month MANUALLY.
We would like to create a variant that will open the new period automatically every month. The only problem is the period / year that changes every month (I do not know how to create a variant with changed values - if it is at all possible).
How can we create a variant that will run every month to close the MM period ?
Thanks for your help,
IsaacHello Isaac
It is possible......But to make it happen you need to go with date field and not with Period and year.
Steps -
1 - Enter field FROM Comp Code and TO Comp Code
2 - Enter the date (E.g - 05-Mar-2007)
3 - Save as varient....Give the varient names as required.
4 - Activate the 4th checkbox (Selection variable) in front of date field
5 - Click on button 'Selection variable' at the top of screen.
6 - Click on YELLOW light. This will turn it GREEN. Now you have 1st light as YELLO which was previously yello.
7 - Click on the down arrow just below the yello light.
8 - Select the appropriate option and save the varient.
The day of batch job scheduling depends upon the options you selected in the 8th step.
I hope it clarifies your dought and will allow you to create the varient as per your requirement.
Best Regards
Avinash -
"Incorrect period" error while executing J1INQEFILE
Hi
I am running J1INQEFILE. I gave company code as 1000.
Fiscal year 2011.
Period: 09 (as december is 9th month of FY 2011)
Fiscal Period: 01.12.2011 to 31.12.2011
Clearing Date: 01.12.2011 to 31.12.2011
When i press enter, it gives error: Incorrect Period and cursor moves to Fiscal Period.
Please tell me what is the error. I am trying for invoices that are posted in december 2011.
Please helpDeepak, are you follwoing the FYV of April to March?
If yes, Q3 is fine.....if not you need to select Q4.
Second thing is...Have you done the J1INCHLN transaction for those Vendors?
If yes, are they appearing in J1INMIS and J1INBANK
If yes, let me know we will work on solution
Thanks -
Transaction F.27 Periodic Account Statements
Transaction F.27 Periodic Account Statements
My goal is to save on server the PDF printout of each customer using spool request number. The problem is that the spool generated by the transaction is for all customers. I must find a way to generate one spool request per customer. Any ideas would be appreciate.
Regards,
Daniel CantinHi Daniel,
As the documentation fo F.27 says:
Output
If correspondences are printed, a log with the spool requests created by
the print programs is output for each program run. If you do not specify
in the program on which printer the log is to be printed, the program
may take the printer specified in the user master of the user who
started the program or the printer specified when the job is scheduled.
If the program is carried out online, the log is displayed on the
screen. If the program is planned as a job, the spool request name of
the log is made up of the identifier F140, the printer destination, the
date of creation and the program ID KORK.
The correspondences are printed by means of the corresponding print
programs. If printing is possible on the basis of the data and the
configuration, a spool request is created for each correspondence type
and company code. Regardless of whether printing actually takes place,
the processed correspondence requests are marked as completed by means
of a print date, so that reorganization can be carried out.
As it says " a spool request is created for each correspondence type and company code. " perhaps you will have only one spool order. So, in this case, you will need to create your own report using RFKORK00 as a template, creating a copy of include RFKORI93 and replacing it in your own report, changing the value for KEEP IN SPOOL where
NEW-PAGE
PRINT ON
LINE-SIZE 132
LIST NAME PROLISTN
IMMEDIATELY ' '
NEW LIST IDENTIFICATION 'X'
KEEP IN SPOOL ' ' "change 'X' by space or ' '
It's an idea.
Regards
Eduardo -
[Oracle 10g] How to show concurrent transactions during a period?
Hello all,
I used Oracle 10g database
I try to select the number of concurrent transactions during a period.
I know how to select the number of transactions executed in one day, but i want to know the concurrent transactions.
Can you help me ?
Thanks in advance
Regards
MathieuWhich transactions do you wish to track?
Are you referring to transactions that occur against a specific set of tables or all transactions against a schema and/or database instance? -
Transaction not completely Periodically Posted
Hi All,
We are doing asset Year End, we are getting below error message
"Transaction not completely Periodically Posted"
We are running T-Code AJAB. we have already executed ASKBN.
Please guide what all steps I am missing.
Thanks!!
Regards,
Vivek SrivastavaDear Muralidhar,
Thank you so much for the reply.
We have re executed the Year End Process and it is successfull..now we want to cross check whether the Asset Balance tranfer has been transfered to the new Fiscal Year or not.
Please let me know how to recheck the same.
Thanks!!!
Regards,
Vivek Srivastava -
Capital Investment Area was posted Depreciations in an incorrect period
Hi ,
Capital Investment Area was posted Depreciations in an incorrect period, they skip a period.
Can you determine if we can reverse those postings so that they can post in the correct period?
Would appreciate your fastest reply.
Regards
PrasadAll,
Thanks for your answers, the solution would appear to be that the commitments have been accidentally carried forward into 2010 Fiscal instead of 2009 fiscal.
There are no Invoice plans set up on the PO's, thanks for that suggestion though.
The reversal in KSCF does not work and produces an ST22 error dump on our system.
SAP note 971411 appears to fix the error so we will implement the note and hopefully be able to reverse out the commitment.
Thanks to all and if I can assist you FI guys with MM answers I will
Allen -
Unable to delete period from Periods in Control tables
I am trying to delete period 'Sep' from Periods in Control Tables.
But getting msg as 'FDM was unable to find the Record to delete'.
Not sure whether the record got deleted internally.But I can still see it in my Period list in Control tables.
Cud anyone suggest how shud I delete period from Control tables and where these periods are stored internally in FDM??
Waiting for Reply!!!!!!Hi,
There is also a note in Metalink which suggests the record be deleted from workbench client. I did that and it worked. The cause is stated as the record not being entered correctly, and hence the application is unable to find it.
Thanks
Ramya -
Posting periods for controlling
Dear SAP Gurus,
Please provide any documentation or configuration for posting periods for controlling its a urgent requirement i have to due within a week
regards
Rama Mohan BangaruHi,
T.Code: OKP1.
Posting period in controlling is to maintained in the same way as we do in FI.
Please also ckeck out the following link:
http://help.sap.com/saphelp_erp2004/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
Hope this helps.
Please assign points as a way to say thanks.
Regards,
Message was edited by:
Harish Singhania -
MMPV MARV Periods in Transport orders
Hi Gurus,
Check this out:
While customizing in my actual project the table MARV, that keeps the logistic period data, has been set to a transport order to another client in the same machine, meaning that I can set MMPV to period '12' in the testing machine '200', but whenever I transport the order from client '100' to '200' with MARV table the logistic period is reset to '10'. I can change in '200' back to '12' but whenever I transport a customizing order to '200' the logistic period is reset to '10'... Strange.
I've looked some SAP Notes but I have no information there. I can easily solve the problem by opening period '12' on client '100', but still I wouldn't expect this to happen. Do you thing I should remove this object from the transport order?
Any clues?
Cheers.Hi Gurus,
Check this out:
While customizing in my actual project the table MARV, that keeps the logistic period data, has been set to a transport order to another client in the same machine, meaning that I can set MMPV to period '12' in the testing machine '200', but whenever I transport the order from client '100' to '200' with MARV table the logistic period is reset to '10'. I can change in '200' back to '12' but whenever I transport a customizing order to '200' the logistic period is reset to '10'... Strange.
I've looked some SAP Notes but I have no information there. I can easily solve the problem by opening period '12' on client '100', but still I wouldn't expect this to happen. Do you thing I should remove this object from the transport order?
Any clues?
Cheers. -
Problem with MMPV(close period for material master records)
Hy,
I'm really stuck in this weird problem.
I have already open 04.2008 period in MMPV and in MIGO transaction I got this error message:
Document date lies in the future.
Posting period 004 2008 is not open.
What should I do?
Please, someone help me.First check the date in MIGO transaction.... is it current date ?
(April's )
and then
go to OBBP and check the posting period variant,
of your Company code..
Now, go to OB52 and check the periods, they should be in
year 2008 for your posting period variant..
Maybe you are looking for
-
Kernel Panic? Which program's at fault?
This is the 4th time I've experienced a crash in the last 2 months, and all of the reports look similar to this one. If only I knew how to read them.... Can anyone give me an idea as to what might be the cause? Bad Memory? Bad Program? Thanks: Anonym
-
byte[] byarray = ().getBytes(); OutputStream osfile = new FileOutputStream("file.pdf"); osfile.write(byarray); after this when i try to open the file... it throws me an error, saying it is not of proper format. What should be done... Thanks..
-
Can't choose download folder with Image Capture
Hi, I am using Image Capture and am not able to choose the location where I would like to save my images. When I click on the "Download To:" pulldown menu, it is grayed out and blank, with a single checkmark. Additionally, when I click on "Preference
-
How to stop Ovi displaying useless updates?
Ovi Suite 3.1.1.85 Is there a way to stop totally useless updates? I have the Nokia C6-01 with since yesterday the new Symbian Anna. In that there is a totally useless app called Microsoft Communicator and somehow that is called a very important upda
-
Hi, looking for advice on which code to upgrade to. We have a wlc 4404 using mostly AIR-AP1231G-A-K9 access points. The current code is 4.2.130.0. We would like to use some of the 1141 APs and I understand they need at least 5.2. My plan would be to