Transaction PPOME - Building Block

Hi
I'm following Best Practice Building Block J12 for setting up a PS system.
None of the documents I've encountered have reference to Transaction PPOME for the Organizational Model, I would have expected "J02" to have this.
Which building block will I find this in?
Many Thanks
Panduranga

Not sure where you will able to find the PPOME txn in building block. PPOME tnx is belongs to HR modules.
However if you are asking the PS related building blocks. Then, opne this link don't sort , user MS find ( Ctrl +F) give project as the search word.
http://help.sap.com/bestpractices/bblibrary/bblibrary_start.htm
In this way you will get the all the building blocks related to PS. Note down the name of the blocks. Few will be common in all the country.
Then after you can refer indetail.
Regards
Nitin

Similar Messages

What is the transaction code for running Building block & ECatts?

Hai guys,
I am building a new organisation structure using Building block Library. Can somebody tell me which transaction Code to use as well as from where I can download the variant files?
Thanks in advance,
Regards,
maheshwaran. I

Hello Maheshwaran,
For the beifit of others looking for this question,
To create a building block : /smb/bbi -- > building block builder. --> create new Building blocks.
This has to be attached to a scenario and inturn to a solution.
To downlad the variant files : Go to Transaction SECATT --> Enter the eCatt configutation name --> click on display.
Now in the Edit Menu, you can see the option to download variant files.
Regards,
Karthi

SAP AFS Business Process, Building block, Config?

Hello Guru's,
SAP AFS Business process with Transaction codes and the link for Building Block and config guide for SAP AFS module. Will nayone share your expertise?.
Regards,
PV

Hello Guru's,
SAP AFS Business process with Transaction codes and the link for Building Block and config guide for SAP AFS module. Will nayone share your expertise?.
mail me [email protected]
Regards,
PV
Edited by: PV on Nov 10, 2008 9:49 PM

Using Building Blocks

Hi all,
I've installed all the steps of a building block, Sales Analysis, as well as completed the various data loads. I can see data in the info cubes but the queries themselves don't seem to work. Looking at the Credit Memo query, I see that it has static filters applied. The various selection options are showing my company data. Looking at the info cube, I do see data with these filter criteria so I'm at a loss as to why no data is returned. Any suggestions on how to trace the issue?
Also, I wanted to try changing a query to remove the static filters but when I try to edit it, I get an error message "Maintenance of object XXXX of type query is not yet available. Further note is "Manually start the maintenance transaction for objects of type Query". Where/how is that done.
Thanks in advance for any assistance.
Tom

Hi Tom,
It could be because of SAP standard sales analytic info cube delivered with K4 financial variant setting default and you are trying to load the data with other variant like V3 and others.
Check the setting in info cube >change mode> time dimension> click on financial variant> provider specific setting> allow all data from info object.
Check this setting and then see the data on report.
Best of luck.
Rgs,
Ambuj Kathuria
Global Practice Head - BI / ILM

Building blocks for incentive and commission management

Hi Gurus,
I am in need of building blocks for Incentive and commission management, I appreciate if anyone can provide me this above... .
thanks
chandra

hi
see ICM never goes independently,so you wonnt have any help on ICM alone,it works in collabvoration with different transactional data,like opportun ity and channel management.
try these links
http://help.sap.com/saphelp_crm60/helpdata/en/8d/ed100ab6ff425a92458921a551efcd/frameset.htm
http://help.sap.com/saphelp_crm60/helpdata/en/c6/b42d824113469aa04bf695e743c8f4/frameset.htm
best regards
ashish

What are the required building blocks to place part of an application into the cloud?

Hi there,
I have a Windows client/server business management/accounting application written in VBA/Access.
I am thinking of making small parts of the application available in the cloud, for example QUOTES.
First of all, I am not sure if this forum is the right place to ask these questions!
I would like users to be able to access their quotes via tabled or smart phone and be able to add or modify records.
I am interested to find out what building blocks are required to achieve this.
My initial thoughts are as follows:
The user exports their quotes from the application (A) in XML format
The user uploads the XML data into SQL server on my website (?)
The user logs into a mobile app (B) that is connected to the SQL server
The user adds/modifies records in app (B)
The user then downloads their records in XML format from SQL server from my website (?)
The XML data is read and updated in application (A)
In terms of the SQL server I was also wondering if each user should have their own database or whether all users should use the same table QUOTES for example?
Any hints or tips would be really appreciated and many thanks in advance...
Have a wonderful day...
Kind regards,
Michael

Hi Michael,
I’m afraid that it is not the correct forum for this issue, since this forum is to discuss the VS IDE issue.
I have a Windows client/server business management/accounting application written in VBA/Access.
Just to make this issue clearly, is it related to the Office development like this MSDN document?
http://msdn.microsoft.com/en-us/library/ee814735(v=office.14).aspx
If it is related to the Office development, I suggest you post this issue to the
Office development forum like this thread “How
to move an Access App with VBA to the Cloud w/o re-coding? Amazon Web Services Virtual Machine ? Or What ?”.
If not, please feel free to let me know, I will help you find the correct forum for this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to determine the time building block type in hxc_time_building_blocks

Is there a way for me to determine what the time building block type is in hxc_time_building_blocks? I need to query the table and only select entries that are absence related (Vacation, Holiday, Sick Leave). I have the person's absence data from the table per_absence_attendances, I need a way to use the data from that table to get the time building block from hxc_time_building_blocks.

I could ask "supported by what?" but I assume you will
be the one supporting them. Here's a link to the
latest list of registered MIME types.HERE's the link...
ftp://ftp.isi.edu/in-notes/iana/assignments/media-types/media-types

How to get the name of the selected building block in a building block content control?

Hello,
How can I obtain the name of the selected building block in a building block content control?
I want to use this together with an on exit-event to populate other content Controls depending on the name of the selected building block item.
Environment: Word 2010.
Thanks,
Peeter

Hi Peeter,
As far as I know the building block is the pre-built content, and the
BuildingBlock object represents a building block in a template. After add the building block to the document, it inserts the content to the document.
Building blocks are stored in the templates, therefore, to access the building blocks available for a document, we need to access an attached template.
So, I think, we can’t obtain selected building block in the document.
There are some links that may benefit you:
# BdingBlock Object (Word)
https://msdn.microsoft.com/en-us/library/office/ff192414.aspx?f=255&MSPPError=-2147217396
# Working with Building Blocks
https://msdn.microsoft.com/en-us/library/office/ff837878.aspx
# Set the Building Blocks That You Can Use for a Content Control
https://msdn.microsoft.com/en-us/library/office/ff197523.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why wont this Macro work with my custom watermarks, but finds the built-in building blocks from office 2010?

Option Explicit
Sub BatchProcess()
Dim strFileName As String
Dim strPath As String
Dim oDoc As Document
Dim oLog As Document
Dim oRng As Range
Dim oHeader As HeaderFooter
Dim oSection As Section
Dim fDialog As FileDialog
Set fDialog = Application.FileDialog(msoFileDialogFolderPicker)
With fDialog
.Title = "Select folder and click OK"
.AllowMultiSelect = False
.InitialView = msoFileDialogViewList
If .Show <> -1 Then
MsgBox "Cancelled By User", , _
"List Folder Contents"
Exit Sub
End If
strPath = fDialog.SelectedItems.Item(1)
If Right(strPath, 1) <> "\" _
Then strPath = strPath + "\"
End With
If Documents.Count > 0 Then
Documents.Close savechanges:=wdPromptToSaveChanges
End If
Set oLog = Documents.Add
If Left(strPath, 1) = Chr(34) Then
strPath = Mid(strPath, 2, Len(strPath) - 2)
End If
strFileName = Dir$(strPath & "*.doc?")
While Len(strFileName) <> 0
WordBasic.DisableAutoMacros 1
Set oDoc = Documents.Open(strPath & strFileName)
'Do what you want with oDoc here
For Each oSection In oDoc.Sections
For Each oHeader In oSection.Headers
If oHeader.Exists Then
Set oRng = oHeader.Range
oRng.Collapse wdCollapseStart
InsertMyBuildingBlock "ASAP 1", oRng
End If
Next oHeader
Next oSection
'record the name of the document processed
oLog.Range.InsertAfter oDoc.FullName & vbCr
oDoc.Close savechanges:=wdSaveChanges
WordBasic.DisableAutoMacros 0
strFileName = Dir$()
Wend
End Sub
Function InsertMyBuildingBlock(BuildingBlockName As String, HeaderRange As Range)
Dim oTemplate As Template
Dim oAddin As AddIn
Dim bFound As Boolean
Dim i As Long
bFound = False
Templates.LoadBuildingBlocks
For Each oTemplate In Templates
If InStr(1, oTemplate.Name, "Building Blocks") > 0 Then Exit For
Next
For i = 1 To Templates(oTemplate.FullName).BuildingBlockEntries.Count
If Templates(oTemplate.FullName).BuildingBlockEntries(i).Name = BuildingBlockName Then
Templates(oTemplate.FullName).BuildingBlockEntries(BuildingBlockName).Insert _
Where:=HeaderRange, RichText:=True
'set the found flag to true
bFound = True
'Clean up and stop looking
Set oTemplate = Nothing
Exit Function
End If
Next i
If bFound = False Then 'so tell the user.
MsgBox "Entry not found", vbInformation, "Building Block " _
& Chr(145) & BuildingBlockName & Chr(146)
End If
End Function
This works, using the ASAP 1 watermark that is in bold. ASAP 1 is a built-in building block, if i just rename this to ASAP, but save it in the same place with buildingblocks.dotx it wont work. What do i need to do to be able to use this with my custom building
blocks?

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, this issue is related to Office DEV, please post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to reproduce Building Blocks Synth apple loop

hi, a very specific question that you cant answer unless you listen to sample in question - a sample in LPX apple loops called Building Blocks Synth. There is a bass line and a recurring synth chord which closes out every time it appears I think with some kind of filter effect - a bit like a closing hi hat on a plucky synth - a sound I just think is fantastic, but for the life of me cannot work out how it is done. If you get a chance can you cast your expert ear and for those experts , let me know how you think you get the synth sound and effect. You can hear it better if you copy into a track and boost the high end and low end EQ .
I would not normally ask such a question on here but it is bugging me and I could spend my life looking at tutorials to try and work out what it is but not get there.
Many thanks in advance for anybody who takes the time to listen to it.
A related question if anyone happens to know: if I include the loop in a song and successfully commercialise it, is it royalty fee?

I have a a problem a bit like the one described previously.
In Set. 2007 I bought my first mac...an iMac 24".
3-4 months later I had trouble with my HD. The tech support told me that my HD was damaged and could not be fixed. They couldn`t explain why, but they changed my old HD with a new one and problem solved.
Last month as I was installing the snow leopard operating sistem my iMac froze in the midle of the instalation procedure. I turned it off holding down the power button, and when I turned the power back on I got that flashing folder with a question mark in the middle. In short...after trying everything (formating, partitioning etc) I took it to the shop to hava a look.
The tech guy just got off the phone with me saying that my HD was damaged and could not be repaired. The only solution is to replace it with a new one.
In 2 years I had to change 2 HD`s!!!!
My only guess is that bootcamp might have something to do with it cause it frooze the computer lots of times requiring me to turn it off by pressing and holding down the power button one to many times.
Does anybody know any other reason for this to have happended?
Could the installation of snow leopard have had anything to do with this?

Is anyone aware of a Building Block for Blackboard and iTunesU?

We are having some difficulties getting our authentication up and running using our Blackboard system as the transfer authority to iTunesU. We are trying this with the Perl script but may not be working at this right. I thought that there might be enough Blackboard users and programming gurus out there that perhaps someone is working on a Building Block to use with Blackboard and iTunesU.

We have a process to go from Desire2Learn to iTunesU. You should be able to do the same sort of thing with blackboard.
What we did, is we setup a javascript post request coming out of Desire2Learn. This post request contains the course name, username and a few other important bits of information. This request goes to one of our servers which processes the passed information, and generates the necessary itunes tokens and then startes the itunes u authentication process.
There is no reason why you couldn't do something similiar in blackboard. Either way, you are going to need a "middleman" server to intercept the request out of Blackboard, and then process it and iniatiate the iTunes U authentication process.

Refresh Follow up Transaction History Assignment Block on Save

Hi All,
I am doing a requirement where I am creating follow up Chargeback document (marketing) from Claim on click of Save.
I am able to create it using code written in manual button event handler, but the transaction history of the document is not refreshed immediately.
Though when i open the follow up document it is there and when I open the original document again it is there as well. That is, though the link has been created, but how to refresh data of transaction history assignment block on click of Save button of preceding document.
Please suggest if someone has worked on a similar scenario somewhere (may be from Lead to Oppt creation on save).
Thanks and Regards,
Rohit Khetarpal

Hi Rohit
I believe it is in the buffers so maybe you need to trigger an Server Roundtrip dude on this scenario so that refreshing happens and the same gets reflected on the UI
(OR)
Since it is in the overview page do a reread on the entity say in do_prepare_output to get the latest one
(or) use the publish_current() to publish the entity in do_prepare_output.(this will automatically do a re-read i believe)
Thanks
Abishek

Add column in Staff Assignemnt Area(Structure) of transaction PPOME

Hi,
I want to add a new column with custom information in Staff assignment( staructure search) area of transaction PPOME. I tried using the confirguration to add this information but couldnt reach any conclusion. Need Help.
Regards

Hi,
For adding fields at the item level to VL01N Transaction you can use the BADI LE_SHP_TAB_CUST_ITEM.
I dont think it is a good idea to add fields right next to the standard fields in the transaction. A separate tab should be created which will include all the customer fields.
Check the documentation of this BADI for more details. If you want this field only in VL03N transaction then you can implement the BADI accordingly so that it triggers only for VL03N transaction.

Building blocks in SAP-SD

what is building blocks in SAP-SD? and how it is prepare?

You cannot build this !!!!!! SAP has documented various procedures and you can go through this link for more information.
[Building Block Library |http://help.sap.com/bestpractices/bblibrary/bblibrary_start.htm]
thanks
G. Lakshmipathi
Edited by: Lakshmipathi on Jan 25, 2010 6:50 PM
There was a typographical error. The first sentence should have been You cannot whereas originally it was YOU CAN

BADI/USER Exits for Transaction PPOME

Hi,
I need to add a new tab in the transaction PPOME under Details of Org Unit section and maintain some fields in that tab through some custom table. As of I know this can be done through BADIs or User Exits of that transaction.
Can somebody guide me in getting the BADIs and User Exits for this transaction?
Also share some information of how we can achieve this?
Regards
Somu

why you not seeing this:
Adding a new tab in PPOME
sorry i missed to mention not
Edited by: pr@t on Mar 3, 2009 1:04 PM

Transaction PPOME - Building Block

Similar Messages

Maybe you are looking for