Transaction processor error

Hi all,
Appreciate your help in resolving the below issue.
I'm trying to use the MTL_TRANSACTIONS_INTERFACE table for issuing an inventory item with lot & serial control as disabled. I had tried the same earlier and found to be working fine but now the "Inventory transaction worker" (INCTCW) request is giving me status=Error. The interface record gives Error Code as Transaction processor error and Error explanation is null. The concurrent request log file doesnt provide any specific info and just shows "No completion options were requested.". I know if there was any record related error then error code and error explanation would be clear enough to have a resolution but here i cant find where to get the hint on resolving the issue. The request "Process transaction interface" works as per defined in set up.
Thanks in advance.
Best Regards
Zameer

Which forum should i post this in

Similar Messages

Transaction Processor Error in View Pending Transactions

Dear All,
I am getting the Error: "Transaction Processor Error" in View Pending Transactions.
How can I identify due to what reason, this error had occured
because of this I am not able to close the inventory period for these transaction months..
and also I am having the following Error msg for another item in view Pending Transactions..,
How can I clear this ..?
Please update...
Many Thanks in advance....
Edited by: santark on Nov 10, 2009 6:46 PM

Hi,
This is not really and error. Oracle processes transaction in a batch. If one record will fail because of some error, other records/transaction in the batch fails with this error. For this error you really need to get the ERROR_EXPLANATION to find out the exact message as to why it is possibly failing. These can usually have their three flags reset and re-submitted as this error is usually attached to those records in a group where one of the records has been erred with one of the more severe errors.
I believe you can resubmit the transactions which are failed with the below script
Update mtl_material_transactions_temp
set      process_flag = ‘Y’,
     lock_flag = 'N',
     transaction_mode = 3,
error_code = NULL
Where organization_id = &org_id
Thanks,
Raghav

Transaction processor error in Misc. Transaction

Hi,
When i perform Misc transaction in Inventory module then system shows “Transaction processor error” at save Transaction.
can anyone guide about the error.
Regards,
Aman

HI Raghav,
Thanks for the note ids.
I have read all 3 metalink notes & solution written in note id: 412110.1 is applicable but that is for 11i and i am working in R12.0.4. It is some sort of bug.
i.e "the existing items can be fixed by unchecking and checking again the costing enabled flag and the inventory asset value flag."
But there is one problem with the solution that when i try to uncheck both flags system shows error:
"APP-INV-0557: You can't update this field when:
- On-hand quantities, pending & uncosted transactions exists"
Now there are onhand quantities exists for the item and i cannot uncheck or check the costing and asset value flag. Its working only for items with no onhand quantities as number of items are increasing and i can't clear on-hand quantities for every item.
Plz guide if i can avoid error and process misc. transactions without removing onhand quantities.
Regards,
Fahd

'Receiving Transaction Processor' ERRORS

Hi All,
While Running the Seeded Program 'Receiving Transaction Processor', I am getting the following Errors:
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,69604,
Action: Note both this error number and the actions you are trying to perform. Contact your system adminis
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Please help out..,
many thanks......

Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist

Receiving Transaction Processor ERROR

Hello Experts,
Greetings!
I have inserted data into rcv_headers_interface and rcv_transactions_interface to import the PO receipts into the RCV base tables. After executing 'Receiving Transaction Processor' , I am getting below given error , unable to get the trace of this Issue. Please help me in understanding this.
My requirement is to load the PO receipts from the external system into oracle database. Please help me with any piece of information you have.
===================ERROR==============
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,41688,,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause: A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Thank you.
Best regards,
S.Jain.

See if you have data in po_interface_errors for that transaction

Getting error while running Receiving Transaction Processor

Hi all,i am getting an error in po_interface_errors after running Receiving Transaction Processor concurrent program
INTERFACE_TYPE COLUMN_NAME ERROR_MESSAGE
RCV-856 INTERFACE_TRANSACTION_ID RCV_TP_INVALID_TRX_TYPE
TABLE_NAME
RCV_TRANSACTIONS_INTERFACEI am trying to do an Inter Org transfer and i put the transaction_type as 'RECEIVE' .Can someone kindly suggest what should be the transaction_type for an Inter Org Transfer in rcv_transactions_interface table.Any help is appreciated
Thanks in advance!!

HI,
We are getting the transaction_type error eventhough the transaction_type is a valid.
Please advise.
Regards
MV

Error in Receiving Transaction Processor concurrent program

Hi all,i am trying to insert data into rcv_headers_interface and rcv_transactions_interface.So,for this data to get populated in rcv_shipment_headers and rcv_shipment_lines i am running Receiving Transaction Processor concurrent program in purchasing super user.But,this concurrent program gives below error
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:05
+---------------------------------------------------------------------------+
Concurrent program RVCTP returned error
Cause:        RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,81,
Action:        Note both this error number and the actions you are trying to perform. Contact your system administr
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause:        Subroutine rvtbm_batch_mngr() returned an internal error.
Action:        Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause:        A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action:        Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:10
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
{code}
Can someone kindly explain me what's really going why coz i am new to this Applications.
Thanks in advance!!

There are several notes on metalink for "RVTBM-007: Subroutine rvtbm_batch_mngr() returned error".
Take a look at those.
Also if you are using dual uoms, make sure that setup and conversion is setup correctly.
Hope this helps,
Sandeep Gandhi

India - Receiving Transaction Processor program completing in Error status

Hi All
We are getting below error message in program "India - Receiving Transaction Processor". We are on R12.1.3 version.
*** List of Transactions whose processing is skipped due to the below errors ***
Transaction_id->5002 Error Message->Error in Line Number 1 - jai_rgm_claims_pkg.get_term_id => Location ID cannot be NULL
Please suggest the solution.
Thanks
Ganesh

Hi,
The reason for the exception is we don't have any data in the file to zip. If you are sending xml data to the data definition check the path in select clause in bursting control file.
Regards,
Raavi

Error RCV_TP_INVALID_DEST_TYPE when Receiving Transaction processor is run

Hi,
I am encountering error RCV_TP_INVALID_DEST_TYPE, when I try to run Receiving Transaction processor.
What does this error indicate?
Thanks
Manpreet

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

Error occured when running the "Receiving Transaction Processor"

Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因：RVCTP 遇到内部错误。参数：RVCTP,BATCH,,,
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007：子例行程序 rvtbm_batch_mngr() 返回的错误
原因：子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以
RVTBM-080：子例行程序 rvtptcontrol() 返回的错误
原因：子例行程序 rvtptcontrol() 返回时出现内部错误。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮
RVTLO-050：ORA-01403: 未找到任何数据
原因：在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施：请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时，并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP，以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件，因为：
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex Liu

Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu

'Receiving Transaction Processor' ends with error. Receipt not saved.

Trying to make receipt. On header done add to receipt. When the receipt is selected and saved. & then tried to open receving transaction. Receipt NOT found also 'Receiving Transaction Processor' ends with error.
Plz Suggest soluntion.
Regds
9999

When we do receipts then atomatically receiving transaction process runs. On header of receipt there is add to receipt oprtion. User adding in erliar made receipt. But when done add to receipt transction get saved but this receipt number not able to find in receiving transaction.
Now kindly help..!!!
9999

Receiving transaction Process Error

Hi All,
I am getting below error while running the "Receiving Transaction Processor" concurrent program.
Error : RCV_TP_ACCT_PERIOD_CLOSED
I verified PO, Inv and GL periods and all are open.
Please help me to resolve the issue.
Regards,
Sreehari.

Please see if these docs help.
Aid to Resolving ROI Errors RCV_TP_INVALID_TRX_TYPE, RCV_TP_INVALID_AUTO_TRANSACT, RCV_TP_INVALID_RECEIPT_SOURCE,RCV_TP_INVALID_SOURCE_DOC,RCV_TP_INVALID_DEST_TYPE and RCV_TP_ACCT_PERIOD_CLOSED [ID 1301013.1]
New Period, And PO Receiving Open Interface Is Failing With 'Period Not Open' [ID 406257.1]
Aid To Resolving PO_INV_NO_OPEN_PERIOD and PO_INV_MUL_PERIODS Errors [ID 1311513.1]
If you still have the same issue, I would suggest you log a SR.
Thanks,
Hussein

Urgent Please - Receiving Transaction Processor Issue

Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);

Pl see you duplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support
Srini

Urgent Please - Receiving Transaction Processor

Hi,
We are on 11.5.10. I am trying to create PO receipts using the interface program "Receiving Transaction Processor". I inserted data into the rcv_headers_interface and rcv_transactions_interface tables. As this dta is for contract labor, i am assuming that there is no need to insert data into shipment_related interface table. Following shows the insert statement I made sure that I am running the process from the correct org (the org that i used in the filed destination_oprganization field). But still the process completes normally but po_interface_errors has a record with error message as :
"RVTSH-189: Subroutine rvtshiline() returned error
Cause: Subroutine rvtshiline() returned an internal error.
Action: Note this error number and the actions you are trying to perform.
Contact your system administrator for"
The receipt gets created succesfully from the form. Anyone knows the issue? Please help me...thanks
Here are the insert statements...
--Insert data into Interface tables
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID,
processing_status_code,
receipt_source_code,
transaction_type,
auto_transact_code,
last_update_date,
last_updated_by,
creation_date,
created_by,
expected_receipt_date,
comments,
validation_flag,
packing_slip,
vendor_id,
vendor_site_id,
ship_to_organization_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL,
'PENDING',
'VENDOR',
'NEW',
'RECEIVE',
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
SYSDATE,
'test',
'Y',
'ABC',
po_headers.vendor_id,
po_headers.vendor_site_id
po_distributions.destination_organization_id
--Insert record in transactions_interface
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id,
processing_status_code,
receipt_source_code,
transaction_date,
GROUP_ID,
last_update_date,
last_updated_by,
creation_date,
created_by,
transaction_type,
processing_mode_code,
transaction_status_code,
quantity,
unit_of_measure,
source_document_code,
po_header_id,
po_line_id,
po_line_location_id,
po_distribution_id,
to_organization_id,
comments,
interface_source_code,
employee_id,
auto_transact_code,
destination_type_code,
attribute_category,
category_id,
item_description
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL,
'PENDING',
'VENDOR',
SYSDATE,
rcv_interface_groups_s.CURRVAL,
SYSDATE,
fnd_global.user_id,
SYSDATE,
fnd_global.user_id,
'RECEIVE', --'NEW',
'BATCH',
'PENDING',
2,
po_lines.unit_meas_lookup_code,
'PO',
po_headers..po_header_id,
po_lines.po_line_id,
po_line_locations.po_line_location_id,
po_distributions.po_distribution_id,
po_distributions.destination_organization_id,
'TEST',
'RCV',
1234, --employee_id
'RECEIVE',
'RECEIVING',
po_distributions.destination_organization_id,
45074,
'Standard'
);

Pl see your triplicate post here - PO Receipts Interface Error!!
For urgent issues, pl open an SR with Support.
Srini

RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction P

RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction Processor)
Hi
I have a receipt_num 1234 that has 14 lines in it ( from 29-46) and the po_number is 454545.
When I load the receipt with the receiving trans process a recipt get created for all lines except for 1.
This particular line which is 46 is still in the rcv_transactions_interface table as an error, when Update this table and SET processing_status_code = 'PENDING',
transaction_status_code = 'PENDING' and rerun the program it's does not load the data and it complete with a warning and when I look at the po_interface_errors I see this(RCV_TP_INVALID_DEST_TYPE). and put the processing_status_code = 'COMPLETED'and transaction_status_code = 'ERROR'.
Please help please help
null

RCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi

Transaction processor error

Similar Messages

Maybe you are looking for