Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

Similar Messages

New flash player not working for all users

I have Flash 10.0.22.87 installed on a freshly built Citrix 4.5 PS. When the administrator is signed in, everything works just fine. When my users sign in, they navigate to a webpage that requires flash and it either tells them that Flash is not installed or it prompts them to install (but does nothing when you tell it to).
Did flash player become profile specific with this new release? I have 10.0.12.36 and 9.0.115.0 on my other Citrix servers and they work without issue for all users. I've tried uninstalling with the utility I downloaded from adobe.com and re-installing with the offline activeX control. I've played with the security settings opening thing wide open and it still does not work. There is no different software between the problem server and the other Citrix servers other than this version of Flash.
Any suggestions? Thanks in Advance
Linc

I am experiencing the same problem on my LAN. Administrator account the app works fine, end users sign in with non admin accounts and it will not work.
I spent some time reading online and found the following instructions on the NET. I tried them and I thought it worked because I was able to log on as a non admin user test account and the flash player worked just fine.
Log in as Admin
2. Download the following zip file from here:
www.supportflash.com/reset_all.zip
3. Unzip this folder onto your desktop.
4. Drag both files ‘reset_min_all.cmd’ and
‘subinacl.exe’ to your
desktop.
5. Run the reset_min_all.cmd file.
6. It will open a DOS like terminal and start
running through registry
keys.
7. When it is finished it will say “press any key
to continue”.
8. At this point you can install the latest Flash
Player:
for Internet Explorer:
http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_F
lash_Player_9_ActiveX.zip
other browsers:
http://www.adobe.com/go/getflashplayer
9. Check that Flash Player is working for the
Admin.
10. Check that Flash Player is working as the
other 2 users.
I hope this information helps. Feel free to reply
if you need further
assistance on the issue discussed here or file
a new case if you want to
report a new issue in the Support Portal:
I also found 6 different versions of Version 8 that supposedly does not require Admin priveleges but it does. Back to the drawing board.

Exe created with Report Generation toolkit does not work for all users

I created a exicutable with the report generation toolkit and it only works with some of my users. I use microsoft 2007 and anyone that has microsoft 2007 my exe works well. Most of my users that have microsoft 2010 are able to use my program as well. However, there is one user with 2010 and Windows 2007 that cant get my program to work.
Any suggestions for troubleshooting this?
Thanks

The most likely issue is due to the fact that Microsoft changes the ActiveX object model of Office for each version of Office. The Report Generation Toolkit does a pretty good job of handling this, but it is not 100% effective. Search, for example on the "Set Cell Border" function and you will see what I mean. In these cases it's up to you to handle this issue. How you handle it really depends on your situation. For us to provide a more concrete answer you will need to provide further details, such as what toolkit function is "not working" (whatever that means), and who you "users" are. Is this an internal distribution? Are you selling this program? Is this code written for a project with a specific customer?

SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW

Dear Experts,
We have connected our 9i db with Sybase db using Hs connectivity.
and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
select Into (variable) is not working.
Please help to resolve the select into statment which is in BOLD in the below routine
PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
Thanks & Regards
Eidy
PROCEDURE SRBL_INSERT IS
CURSOR SRBL IS
     SELECT impno,impcod,impnam
     from oracle_table1 a, oracle_table2 b
     WHERE a.impcod=b.empcod
     v_srpcod varchar2(5);
BEGIN
FOR rec in SRBL loop
     begin
select "im_code" into v_impcod
     from SYBASE_TABLE_VIEW
     where "im_code"=rec.impcod;
exception when no_data_found then
     v_srpcod:=null;
end;
END LOOP;
END;
Edited by: Eidy on Aug 16, 2010 11:28 AM

hellow
try this.
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
v_srpcod := v_impcod ;
........

Spry select menu validation not working for all menus

This is VERY strange...I have two menus which show depending on the selection in another menu. The other, or main, menu has the spry validation working fine. So does the validation for one of the other 'child' menus. But the other child menu validation does not work, despite the fact that the code is nearly identical for both except for the spry ids and select ids (of course). You can see the form working at:
https://registrations.ucc.usyd.edu.au/profile.php
If you select, say, Arts faculty from the faculty menu, then you will get another menu for schools. Validation works for these when the submit button is pressed. However, if you select 'Not Faculty' from the faculty menu another menu will show instead of the school menu. This is the menu that is not validating.
I have attached my php page for the code in this form.
The same problem exists for other menus that are in hidden divs further down the page.
Any help appreciated!!!!

Your key is the "suitcase fusion for a font manager" line.
There is a bug where you won't be able to create a button if you have a bad font, or a duplicate font, installed.
First try shutting off all of the fonts you have open with Suitcase, and see if that helps. If so, open one suitcase at a time until you figure out which font is the culprit.
If shutting off all but the basic System fonts does not help, you might have to reinstall your system, or somehow update your core System fonts. I don't know how to do that, but there was a recent article at http://www.tidbits.com/ that discussed fonts and their maintenance. But ultimately it's a font problem.

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

Flash not working for all users XP

I had much trouble downloading and installing flash player.
Finally the install just worked but now the flash player only seems
to work for me. The other accounts on the PC cannot see flash
content. We are usig Windows XP home.

Try upgrading to admin (temporarily) for each account and reinstall Flash Player under each, then set them back to regular user accounts.

User exit (PBO) does not work for IT0107 (Planned working time Belgium)

Hello,
I have written a simple code in program ZXPADU01 in order to default a field of IT0107 (part of IT0007 for Belgium). However, my field is not defaulted to the correct value.
The problem seems to be a
CLEAR P0107
statement in module "default" of dynpro MP010700 (screen 0100):
if psyst-ioper = insert and PSYST-IINIT = YES.          "XEOPH0K010351
    clear p0107.
    SELECT SINGLE * FROM T5B9G WHERE PERSG = P0001-PERSG
                               AND   PERSK = P0001-PERSK.
    IF SY-SUBRC NE 0.
      CLEAR T5B9G.
    ENDIF.
    IF p0107-BESTE IS INITIAL.      "RIB12Jun01
      PERFORM READ_BESTE USING p0107-BESTE.
      IF p0107-BESTE EQ SPACE OR 549BRC NE 0.
        p0107-BESTE = T5B9G-BESTE.
      ENDIF.
    ENDIF.                          "RIB12Jun01
    IF p0107-BERGM IS INITIAL.      "RIB12Jun01
      PERFORM READ_BERGM USING p0107-BERGM.
      IF p0107-BERGM EQ SPACE OR 549BRC NE 0.
        p0107-BERGM = T5B9G-BERGM.
      ENDIF.
    ENDIF.                          "RIB12Jun01
    IF p0107-BEREG IS INITIAL.      "RIB12Jun01
      PERFORM READ_BEREG USING p0107-BEREG.
      IF p0107-BEREG EQ SPACE OR 549BRC NE 0.
        p0107-BEREG = T5B9G-BEREG.
      ENDIF.
    ENDIF.                          "RIB12Jun01
*   Set defaults from features
    perform set_DefbyFeat using    p0007
                                psyst-ioper
                                psyst-iinit
                       CHANGING p0107.
endif.
Prior to the clear statement, table p0107 contains my default values, but the statement clears those values...
Any idea how to solve this?
Many thanks in advance!

Problem is solved with OSS note 1376481.

Office for mac not working for all users after migration

Recently purchased macbook retina display and used migration assistant to move everything over from a macbook pro 17" (late 2011). After the migration my login (admin rights) has no problem on the new macbook, but my wife login cannot use the Office for Mac without being asked to do an install.
Problem is, the version we have goes through the install and then asks to 'register' the product and the version is no longer supported so you cannot register, therefor the program will not run.
Am I missing something here? Everything still works on both of our sign in's on the old macbook pro, and on the new macbook retina, office works on my sign in only.
The original install was a download version, so there are no 'disks' to do a re-install.
Any suggestions?

You need Acrobat 7.1
Is your Office 2004 up to date?

Convert date on user specific settings

Hi all,
I want to convert date on user specific settings
Example i have seetings like dd/mm/yy and another user has settings mm/dd/yyyy.
If i login any client i want to convert date to yyyyddmm.
How can i do this.
Thanks

Hi,
*   Convert date 1/3/9999 into 99990301
    CALL FUNCTION 'CONVERSION_EXIT_SDATE_INPUT'
      EXPORTING
        input = w_inputfile-endda
      IMPORTING
        output = w_inputfile-endda.
*   Convert date 99990301 into 01/03/9999
    CALL FUNCTION 'CONVERSION_EXIT_PDATE_OUTPUT'
      EXPORTING
        input = w_inputfile-endda
      IMPORTING
        output = w_inputfile-endda.
or try this..
Key = sy-datum.
SELECT SINGLE * FROM usr01 WHERE bname = sy-uname.
CASE usr01-datfm.
    WHEN 1.
      WRITE key TO formatted_date DDMMYY.
    WHEN 2 OR 3.
      WRITE key TO formatted_date MMDDYY.
    WHEN OTHERS.
      WRITE key TO formatted_date YYMMDD.
ENDCASE.
Prabhudas

User specific settings for message ME161

All SAP Gurus,
Is it possible to have user specific settings for message like ME161?
We want the message ME161 to be displayed as warning message to one user and the same message to be displayed as an erorr message to another user.
Is it possible?
Regards,

hi,
In addition to the above data:
Messages are defined like this:
Version AG No. Text TYPE
Normally, in std case,
Version will be always 00 for system defined messages....
Now if you wanna make the the same message as authorised,
then copy this exsisting message....
While copying system will ask for version, here enter it it Z*
Now on the other hand make the other settings for user/user grp in SU01 and here set the user parameter as MSV(THIS IS MUST)....
and then try...
Regards
Priyanka.P

Data fields selected in a form are not displaying

I have selected "Size" & "Outlook Data File" as 2 fields that I need to see on the front tab of all my contacts. In testing to see if it works I opened a new contact (blank). Upon it trying to open I get the same error
twice "The Property does not exist. The field you want to modify does not exist for this type of item." I don't want to modify these two fields, just display them. I chose the same field names in the forms developer/design
area as when I added the field as a display cols. in a simple list of contacts (e.g. phone book). So it works in Viewing a list but I can't see these 2 fields when I add them to a form. More precisely the labels show, "0" shows as the
size and blank in the other display field.

Hi Steve,
Situation: Through the yrs I've had multiple email domains. I've discovered that as I opened and edited contacts they did not always save to my main contact (.pst) I want to consolidate my contacts to my new one.
If I open the same email address from 3-5 different .pst & now MSX too, I want to know which file (domain) they are being displayed from so I don't necessarily have to ck every field to know if I can simply delete one or if I have to go field
by field to do a merge. Secondly, I've found that some contacts from older domains never got to my current .MSX so I'm trying to figure the best way to see these. (Doing an export, then import & then removing dups is not a feasible answer.
The exports truncate my notes to 250 chars so I loose too much of my history.) I added "InFolder" to the contacts form but several say "contacts" so that is not enough to differentiate them. I tried to go & change the name of the older contacts
folders but still have 3 contacts folders that I can't seem to change.
"A field appears in the Field Chooser but it doesn't mean we can use it on every type of Outlook item. We can only use fields appropriate for the form we are designing." I realize this but these 2 fields are available & display beautifully when
I select them in my "View" of a list of contacts so it's associated in the OutL database. Seems logical that it should be on a design form too.
Is there another suggestion for differentiating where the source of the contact comes from?
Not sure I follow what you mean by, "We can also post in Outlook for Developers forum to check the properties of Outlook contact form, and confirm which fields we can add to it:" ?? Will this serve as that posting or are you saying post a separate thread?

WDJ - Right click- User settings , not working at all times

We are working on SAP Netweaver 7.4.
We have developed WDJ applications in PO server and are displaying the application in SAP EP using the remote iview method.
Our requirement: We need to show the users , right click ->User settings so that they can modify the view.
Steps taken: The allowuserpersonalisation has been set to True.
Issue:
Not all of the remote WDJ application are showing the User settings.
For e.g: If it is working for WDJ application A, it is not working for WDJ application B.
Here is where it gets more confusing !!!:
If role A contains WDJ application A and role B contains WDJ application B.
then:
1) if WDJ application B is assigned to the role A, then the User settings start working for it
2) if WDJ application A is assigned to the role B, then the User settings still work for it
3) if WDJ application B is assigned to the role C, then the User settings do not work.
Can anyone please help?

Hi,
normal right mouseclick is disabled as of 710 I guess, I assume you mean the ctrl+alt+right mouse click, right?
Also , I am not sure I fully understand your A-B-C example. Can you please elaborate it in a less abstract way? Can you show concrete examples what is not working regarding the end-user personalization? Are all wd java applications running in a non-standalone way when you test end-user personalization?
Cheers,
Ervin

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Similar Messages

Maybe you are looking for