Transaction SFAC, to change field attributes about a dympro

Hello,
i would like to display the field VIQMEL-PRUEFLOS on the screen 3011 of the module pool SAPMQM00.
I set propriety visible likes other fields that are visible, but when a call transaction QM01 the field doesn't appear. Why? I have this problem only with this field!
Thanks

Hi,
As I am experiencing the same problem, I was wondering if you could tell me how you fixed it?
Thanks in advance,
Thomas

Similar Messages

  • Change field attributes of fields created using EEWB

    Dear SAP gurus,
    we have extended our complaint transactions by adding some 'customer' fields using EEWB.
    Now, the program name for this extension is: SAPLZCRM_BTX_EEW_UI02
    and the screen number where those fields are is "0100".
    The screenfield is for example ZCRMT_0100_BTX_UI02-ZZPO_REF_NO
    Now the field is general available for every Complaint transaction.
    <b>My questions are:</b>
    1) Suppose I want to make this field Output Only
    is this done via the screenpainter using:
    Program name:SAPLZCRM_BTX_EEW_UI02 and Screen: 0100
    (Since I am not sure you are allowed to change the screens generated by the EEWB).
    2) I would like to make this field input/output (but only for 1 transaction type XX) and not for the other complaint transaction type YY. Where can we built in this check?
    thanks for a quick response
    cheers
    davy

    Hi,
    Simple solutions:
    | 1) Suppose I want to make this field Output Only
    | is this done via the screenpainter using:
    | Program name:SAPLZCRM_BTX_EEW_UI02 and Screen: 0100
    | (Since I am not sure you are allowed to change the screens generated by the
    | EEWB).
    --> Yes very much you can change the field attributes. tHis can be done thru SE80
    | 2) I would like to make this field input/output (but only for 1 transaction type XX)
    | and not for the other complaint transaction type YY. Where can we built in this
    | check?
    --> There are 2 ways of going about it:
    1. create a PBO module and check the Transaciton type and depending on that you can grey out the fields at runtime
    2. Keep the fields as input/ output and write BADI CRM_ORDER_FIELDCHECK
    and method FIELDCHECK. Here you can say wchich field is to be greyed out dpepending on Transaction type
    Hope this helps
    Kindly reward with points in case helpful
    Sharif

  • Change field attribute issue

    User was having an issue setting a field from protected to open, here is a sample.

    Are you just trying to change the field from Protected to open?  In designer, open the pdf, select the protected field and look for the Object Tool box, select the "value" tab and change the type dropdown from "protected" to "user entered-optional" (or whichever setting you want from the menu).  The attached pdf has all fields open.

  • Change Screen Attributes of Standard Fields on ME22N

    Hello Fellows.
    I'm facing a problem trying to change a screen attribute of a ME22N standard field at Item Detail:
    My requeriment:
    I need to change the Delivery Completed Indicator (MEPO1313-ELIKZ) from Delivery Tab in ME22N, to Display Only, everytime it's flagged on (marked).
    So, something like this:
    - Call ME22N
    - Delivery Completed Indicator marked?
      - Yes: Change it to Display Only
      - No: Leave it openned.
    I was able to change it to Display Only changing it's atrribute at SPRO - Customizing, but I need it only at certain conditions.
    Any idea?
    Thank's.

    Thank you for your reply Weston.
    Since I don't have too much OO skills and I'm new to BADI's, any document explaning how to use a BADI?
    I heard about this BADI, that it can only change custom fields attributes. Have you sure I can use it for standard one's?
    Thank's.

  • How to change the  attribute of screen field to drop down list dynamically

    Hi All,
      Col X                   Col Y
      A                        input field
      B                       drop down list
    This is a tabular disply where the Screen field attribute for Col y  is NO DROP DOWN BOX.
    My requirement is to change the attribute of COl Y to DROP DOWN list depending on the value of
      COL X  dynamically.

    Dear Ajay,
    Actually this requirement is to enhance the standard screen for Tcode :EHSVU21.
    So depending on the 1st Column(Test no)  value ,i have to change the 3rd Column(Low.norm.result)
    property either to DROP Down or not.
    So in the PBO only the changes to be made and there is no field in SCREEN internal table for changing the attribute to DROP down. I checked SCREEN internal table where the field VALUE_HELP and REQUEST is useful but not  suitable for my case.
    Any solution available?

  • How to change the attributes of screen fields dynamically

    <b></b>
    well i have created a table by name empmaster_data with following fields.
    *emp_id.
    *emp_fname.
    *emp_lname
    *dob.
    *doj.
    *dept.
    *desig.
    now using a single screen i want to create,change and display the information.even i am using save and exit button.
    now i want to change the attributes of screen fields dynamically like active,input,output,invisible.

    Hi,
    Have Different Radio Buttons for the purposes what you have and use AT Selection Screen Output, Under the event Use loop at screen and with continue with your requirement.
    Hope This Info Helps YOU.
    <i>Reward Points If It Helps YOU.</i>
    Regards,
    Raghav

  • Changing form field attributes to multiple fields simultaneously

    We have to edit a grid of, say, 10 rows by 10 columns. Every column must be of the same type (date, amount, phone number, etc.) and yet I have to change 100 attributes, one at a time. Multiply that times lots of forms.
    Currently, only the justification and a few attributes can be multiply edited.
    -Ramon

    From what I can see, InfoPath doesn't seem to fit what I need.  Is there a way to edit the default edit form or the DataFormWebPart to change a 'Single Line of Text' Field to be a 'Multiple Lines of Text' field? 
    I appreciate the help,
    Brandon Petersen

  • Change field label for field IZWEK in transaction AS03

    Hi experts,
    I would like change field label for field IZWEK because I want use it for another purposes. Itu2019s name is Investment Reason at transaction as03.I can change name this label in reports by using se63(translation->abap object->short text->repository text->data element) and giving object name as IZWEK. I get changes in reports only, in help(F1). But I havenu2019t idea what cause change label in as03 transaction.
    Help me please.
    Regds Stenwa

    in tr. AOLK and AOLA you can change this.

  • Field Attribute change in infotype 0007 (P0007-ZTERF)

    Hi All,
    In infotype 0007 i want to change the field P0007-ZTERF - (time management status) attributes to output only.I have changed in field attributes in module pool.
    Still it is allowing input. Is there any other way to make this field output only.
    Thanks

    Hi,
    Go to SM30 and enter V_T588M  then maintain MP000700 new entry for your country specific screen with P0007-ZTERF output field .
    Maintain feature P0007 for your country.
    Hope It will work.
    Regards
    Sunil Kondoju

  • Change the field attribute of a field in data source - 0CRM_SALES_ACT_1

    Hi ,
    I have a data source named 0CRM_SALES_ACT_1 in CRM system.
    The fields PLANNED_TS_FROM and PLANNED_TS_TO are hidden fields i.e. the field attribute is 'A' - Field in OLTP and BW Hidden by SAP.
    Following are my doubts:
    1. Whether the values of these fields will be extracted into BW or it will not be?
    2. How do I change the fields attribute value of these fields(its standard data source)?
    3. Is there any SAP note to do this ?
    4. If the above doesn't exisits, then should I go for a append structure to the standard data source?
    Please help me.
    Regards,
    Ahmed.

    Hi,
    U can unhide ur fields in RSA6 and then replicate the datasource in BW. These fileds will come in BW.
    You cant change the attribute value for STD DSO.
    No SAP note for the same.
    You can append the datasource with the new fields with the attribute you want and hide the std. fields then goto BW and replicate it. You can then map it with the BW fields as you want.
    *Assign points if helpful.

  • In which transaction can I change the status of a field?

    Hi,
    In which transaction can I change the status of a field?
    In transaction FB75 (enter customer credit memo) on the Details TAB, the G/L account is defaulted.
    How can I change this field, so that I can enter a new G/L account?
    Thank you for your feeback.
    Kind regards,
    Linda

    hi Linda,
    this is the reconciliation account of the customer. As another commenter already pointed out, you can change this in the master data of the customer (tcode FD02, Company code data).
    From Release 4.7 (and up) there is another option: in the master data of this G/L account you can set up, if you can change this G/L by posting. This is a checkbox in the G/L master data (tcode FS00). If you tick it, you'll be able to change this reconciliation account it in FB75 (and elswhere by customer postings).
    "I see that in transaction Fd02, the reconc. account is also grey (cannot be changed)."
    You have to check the field status settings in SPRO!
    hope this helps
    ec

  • HCM Forms - Dynamic change to field attribute - edit/nonedit

    Hi,
    I have a scenario wherein 'A' field will be editable to user 1 and 'B' field will be non editable. Then he sends the form. When the 2 user opens the form 'A' field should be non editable and 'B' field should be editable.
    I have created 2 steps for the same. Step C and step D.
    I have kept the field attribute of both A & B as 'Automatic'.
    in step C i am using both the fields while in step D i have not assigned the field A but kept it as relevant and assigned the field B.
    But still in runtime both the fields are showing as editable in both the steps.
    What am i missing.?
    Thanks,
    Nikhil

    replied to your other thread on same/similar issue.

  • Very urgent : Problem with field attributes in Datasource

    Hi
    I am getting a problem with field attributes in the datasource.
    The issue came up after i modified the extract structure-i modified one field and
    added one field to the structure.Now those two fields are not visible in BW.
    When i checked with transaction rsa2, i could find that for those two fields , the
    field attribute is <b>'A'</b> which is <b>'Field in OLTP and BW Hidden by SAP'</b>.
    I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
    Please let me know what can be the issue.
    Regards
    Leon

    Hi,
    did you change this attribute via RSA2?
    you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
    Replicate your datasources in your BW.
    Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
    Maintain your TRules
    Activate
    hope this helps...
    Olivier.

  • Changing field labels

    I need to change the description of three fields, VKBUR, VKGRP and BZIRK so that the terminolgy aligns iteself with our business processes.
    I have used SE80 to modify the Data Elements descriptions, short, mid and long.  I have registered the change through SAP.
    The changes have been activated. Though the log reported that a number of tables could not be modified because the enhancement category for some obscure tables was missing.  Most of the tables were adjusted.
    Viewing transaction VA22 - Quotations the sales header screen has the correct new description for only one of the three fields!  Why this should be one of three is a mystery.
    I think that the structure DD04D is filled with the short, mid and long descriptions. 
    Any ideas?

    Hi Nigel,
    You can change field labels, in tx CMOD->Go to->Text Enhancements-> Keyword->Change.
    Here you can enter the Data Element of the field you want to change the text, and the language. Also, you should look at the screen where the text field is. Because if the text has the attribute "Modify" to "F" (Fixed), you cannot modify this text.
    Thanks
    Warm Regards,
    Mohammed Hussain.

  • On transaction FBL3N  report change layout and save layout icons  not activ

    Hi,
    I am working on upgrade project from 4.6C to ECC6.0. On transaction FBL3N  report change layout and save layout icons  not active; only select layout icon is active.
    Please advise how these two icons can be activated.
    saeed

    Hi,
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70.
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: You can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    I guess that your user-id have set activity 03 for this object.
    The SAP notes 374656 and 409190 are recommended.
    So, if the values 01 and 02 are not included, then
    the user can't change and save layouts.
    For the line item display in FI the authorization
    object FI_IT_ALV has been created as an extra security check in addi-
    tion to the ALV authorization object S_ALV_LAYO.
    Please check note 374656 where you should be able to find
    relevant info about this. Also note 637554 should be helpful.
    Regards,
    Aidan

Maybe you are looking for