Transaction to Change Group Currency in a Specific Ledger

Hi Everyone,
Is there a transaction where I can choose a ledger to post an entry in group currency only?  I need something similar to F-05 but have the ability to post to a specific ledger.
Thanks,
Pete

Hello,
At the time of clearing, the foreign exchange differences cannot be posted.
You need to do the foreign currency revaluations of open items Refer F.05 or F-05
Please note once document is posted currency or amount cannot be changed.
Regards,
Ravi

Similar Messages

  • Reporting in Group currency

    Dear All,
    We have an issue related to report as below
    Our SAP system is currently set up to report in the following company currencies :-
    1000     GBP
    2000     GBP
    3000     EUR
    4000     EUR
    5000     GBP
    Currently our reporting or group currency is GBP, so  co.code 3000 and 4000 are also reported in GBP.
    The issue is, can we report in more than one Group currency at a time ?  If possible we would like to
    report group results in GBP and EUR. If that was not possible, is it difficult to change Group currency from GBP to EUR.
    Looking for your sugggestions.
    Thanks in advance
    Prasad

    Hi Paul,
    Thanks for your quick reply.
    All the above mentioned co.codes are assigned to only one controlling area.
    In controlling area currency settings are as below:
    Currency type: 30 : group currency
    Currency       : GBP
    Now can you please suggest me, how to proceed further.
    Thanks in advance
    Regards,
    Prasad

  • How can I dynamically change group field column?

    Hello!
    I need to group data and create group totals for that table. Is
    it possible to dynamically change group field column for
    specific table, depending on data retreived from parameter form?
    Thanks,
    Mario.

    quote:
    Originally posted by:
    ljonny18
    Hi,
    I am using a grid within a component in my Flex application.
    I have an XML dataProvider, and I want to change the row
    colour of my Grid depending on a value coming form my dataProvider
    – but I cant seem to get this to work :(
    can anyone help / advise me on how I can dynamically change the
    colour of my grid row depending on a value coming from my XML
    DataProvider????
    Thanks,
    Jon.
    Hi,
    a few hours ago I stumbled across this cookbook entry - it
    didn't solve MY problem, but maybe it provides a way to solve your
    problem?
    http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=61&product Id=2&loc=en_US
    From the article:
    quote:
    Changing the background color of a DataGrid cell is not as
    simple as changing some style because the default renderer for a
    DataGrid cell does not have a backgroundColor. Therefore, to do
    this simple task, you have to create a custom itemRenderer where
    you draw your own background in the updateDisplayList function.
    HTH
    Uwe

  • Group Currency setup

    Dear Experts,
    SAP client level- Currency (INR) was set up for my client and now he want to have reporting in USD also.
    When we define Group currency (OB22) then system will consider Client currency.
    I changed Client level(SCC4) currency to USD then I was able to set up group currency as USD.
    Will these changes cause any problems in Existing system, Please let me know.
    Thanks, Meena

    Hi Expert,
    Suggestible not to change Group Currency, if it is already configured..
    In case of fresh configuration, then use this following options...
    By changing client level as USD, it won't effects any things, but it will change Group Currency as USD for entire client.
    We have one more option to use additional currencies in OY01 w.r.t our company code, If our company code country is IN, then in T-Code: OY01, go to INR and provide Index Based Currency as USD or Hard Currency as USD, which can be used for our parallel currencies.
    This answer may conclude your problem...
    Regards,
    GOPI KRISHNA YANDRA
    SAP FI/CO CONSULTANT
    Edited by: GopiKrishna.Y on Dec 14, 2011 6:24 PM
    Edited by: GopiKrishna.Y on Dec 14, 2011 6:26 PM

  • How to change config to allow posting to group currency field

    Hi,
    I am experiencing a problem whereby the asset for my local currency (USD) is different from my group currency (USD). There are many wrong postings causing this difference.
    And it is too late & tedious to do all the correction.
    Area 01 Local Currency (USD)
    Area 03 Group Currency (USD)
    However, I would like to do a posting to asset in both loc & group currency. My current config does not allow changes to group currency field when posting a transaction to an asset. It is grey off. System auto generate the figure.
    How to I change the config so that I can also input a different figure for the group currency ?
    Please help urgently.
    Thanks.
    Angel

    Hello,
    I contact you because I need to maintain a "Person Group" (PERS_GROUP in ADRP table) for 1 sales organization (SD module), but I have no idea how to do that... I checked the customer master data views (transaction XD02) but I did not find anything...
    Do you know which transaction I should use?
    Thanks a lot in advance!

  • Transaction code to change group indicator & group number of a routine

    Transaction code to change group indicator & group number of a routine

    Post Author: paul.carpenter
    CA Forum: Formula
    Sorry for the ignorance.  I did a little more playing, created a group summary count, then checked it against my record count per group.
    All set now!

  • Group currency in treasury transactions

    Dear all,
    we are implementing FSCM module.
    Our customer needs to have transaction in document currency, local currency and group currency.
    Table VTBFHAPO shows only document and local currency amounts.
    Some of you can tell me how to solve this problem ?
    Thanks,
    Elena

    Hi Elena,
    ...conversion into a 3rd currency takes place in FI.
    Regards,
    Lorenz

  • Transaction in group currency

    Dear all,
    we are implementing FSCM module.
    Our customer needs to have transaction in document currency, local currency and group currency.
    Table VTBFHAPO shows only document and local currency amounts.
    Some of you can tell me how to solve this problem ?
    Thanks,
    Elena

    Hi,
    By default in treasury, you can view the transactions in the actual transaction currency and the valuation area currency.  In case you want to check in group currency I guess you need to create a new valuation area with the group currency.  Then you can check the deals in group currency in that valuation area.
    P.S. there is a separate forum for treasury applications which you can use to post treasury related questions.  You will get more responses there.
    Regards,
    Ravi

  • Group currency amount missing with transaction code FBB1

    Hi,
    Whenever there is a document posted using transaction code FBB1 there is no updation of amount in group currency. If the document currency is matching with local currency then even the local currency is also with zero value.
    Can somebody explain me the functionality of FBB1
    Thanks & Regards,
    Raghava

    Hi Alas,
    Please have a look at the following note:
       - 335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy
    I hope this helps.
    Best Regards,
    Vanessa.

  • Group currency change in SCC4

    Hello,
    We are planning to change the group currency in DEV enviroment (we are not live yet), would like to know if you guys are aware of any further implications regarding this change, os is this really as simple as that.
    Thnks.

    Thks for your fast response Srikanth, I've seen the OSS and as we are not live yet and we have no test data yet (we're just starting realization phase), may I assume there is no risk in changing this currency?
    In the other hand, should this group currency be configured as the controlling area currency as well in order to avoid inconsistencies as stated in OSS 119428?
    Regards,

  • How to get historical currency rate for second group currency transactions in Fixed Assets

    Hello,
    My client had MXN (Mexico Currency) as a legal currency and when the company code was implemented (went live) group currency was not implemented. After 3 years this company code implemented second local currency as USD and is now a USD functional Company. When Fixed assets movements such as depreciation, retirement etc are posted; the postings in local currency is fine but postings in group currency is not fine the reason is the exchange rate for group currency must be 'historical rate" but instead of that the entries are being posted in "current rate". To rectify this issue we need to set the exchange rate as the historical rate. Now my question is where/how can I get the historical rate (rate when asset was acquired/purchased). When the assets were acquired the amount was in MXN and there was no maintenance of USD exchange rate as there was no second local currency so then how can I get the historical exchange rate for USD. Most of the assets were acquired/purchased before 5-10 years then how can I find the USD exchange rate for those periods.
    Thanks,
    Rinki

    It is necessary yo have a different rate type for average. The month-end rate type cannot be used.
    The M-rate type is typically the month-end rate.

  • Group Currency  Exchange rate type.

    Hi
    We wanted to post a foreign currency document, with a specific Exchange rate, that is specified in the Document type.
    Doument Currency is getting converted into Local Currency (Company code currency) based on the exchange rate type specifed in the Document type used for posting.
    But, the Group Currency is getting converted from Document currency based on the Exchange rate type : "M" but based on the Exchange rate type specified in the Document type.
    Is there any way, apart from specifying Exchange rate type in Parallel Currencies.
    We wanted the conversion of Both Local (Company code) & Group currencies be converted based on the Exchange rate type specified in the document type, for some specific postings.
    Following is our Scenario :
    Co.Code Cur - EUR
    Doc.Cur          GBP
    Grp Cur           USD
    Document type : XY -- Exchange rate type "1111" specified in the document type.
    Now when a document is posted with Document type "XY"  in Document Cur : GBP.
    Both Local & Grp currency to be converted based on the Exchange rate type " 1111".
    Thanks
    Kalyan

    Hello Kaylan,
    I will try to explain the system behavior, regarding to the exchange
    rate question, "M" is standard exchange rate type used in R/3 so it's
    not possible to change this default setting. However you can assign the
    exchange rate type to each FI document type at transaction OBA7. The
    exchange rate type assigned here applies to both online/batch postings.
    Therefore you can assign a different exchange rate type to the document
    types, but not per company code. The exchange rate that you customize at
    document type level is validfor the first local currency. However, for
    parallel currencies, the system will always use the exchange rate type
    defined in transaction OB22. Please, check your customizing there to
    check your changes.
    If you want to use exchange rate type B, for example, instead of M, in
    customizing you have to give Alt Ex.Type as B against M. So that it will
    take B rate whenever M is applicable. If you want this B rate to be
    applicable for specific document types then you can do the same at
    document type definition itself. Otherwise you can do the same at
    payment program level/ Revaluation. These are the only places where
    exchange type comes into picture.
    See also the following attached OSS notes notes for details:
         335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy
         526623 Different treatment of local and parallel currency in ML
         547946 FAQ Interface: Currency translation, rounding, field status
         518114 FAQ: Goods movements in foreign currency
    regards
    Ray

  • Exchange rate difference posted to Group currency only during MIRO

    Hi SAP Gurus,
    We're activating parallel currency in ML and USD is the group currency. GR/IR clearing acct is managed in local currency only.
    OB22
    Crcy Type  30    Group currency                               Currency   USD
    Valuation        Legal Valuation
    ER Type    M     Standard translation at average rate
    Srce curr. 1     Translation taking transaction currency as a basis
    TrsDte typ 3     Translation date
    Please find below scenario:
    Co code currency: ZAR
    PO: ZAR
    Upon GR:
    Posting date- 04/14/2009 exch. rate 1ZAR= 0.11099 USD
    Entry: debit Expense - 4,078.19 ZAR/ 452.64 USD
              credit GR/IR acct -   4,078.19 ZAR/ 452.64 USD
    Upon IR:
    Posting date- 04/20/2009 exch. rate 1 ZAR= 0.11279 USD
    Entry: debit GR/IR acct - 4,078.19 ZAR/ 452.64 USD
              credit Vendor acct - 4,078.19 ZAR/ 460.02 USD
    automatic additional debit Expense - 0.00 ZAR/ 7.38 USD
    Here are my questions:
    1.) Where would I check the setting for the GL account used in the automatic line entry posted in group currency during IR? (3rd line item above)
    2.) Can this be changed? Say instead of the original acct assignment, the management want to change it to FX gain/loss account
    3.) How?
    I have checked several notes (331910,etc) but I can't seem to find the answers to my questions.
    Appreciate your help. Thanks!
    Regards
    Dru

    Just an update to this issue- I just found out that the system is pointing to KBS when posting the
    exchange rate difference in group currency upon IR, hence, PO account
    assignment is adopted. I'd like to rephrase my question- is there any
    way we can change SAP behaviour such that it will point to other
    transaction key (e.g. KDG) other than KDM? Bottomline is we want it
    charged to other GL account not the one in the PO.
    Thanks so much for your assistance.
    Regards,
    Dru

  • Change the currency of Operating Concern COPA

    Hi,
    In my SAP environment there are 4 controlling areas. Only one of them is assigned to Operating concern. The remaining 3 have COPA inactive.
    I would like to extend the existing operating concern to remaining 3 controlling areas, but before I do that I need to change the Operating concern currency as the one currently set is only relevant for only one controlling area and company code which is GBP. I need to change it to group currency - USD.
    When I use F1 help on currency field in Operating Concern settings in configuration, I get information that 'once data has been posted, however, a change in the operating concern currency would cause the existing data to be interpreted as if it were posted in the new currency (for example: USD 1000.00 in old currency -> DEM 1000.00 in new currency).'
    Even though we have transactional data posted in that operating concern , it is not being used by any department and we are quite happy to have existing data interpreted in USD instead of GBP. No reports are being generated in COPA currently so it will not be an issue for us. We want new data to be proper and constistent.
    When I try to change the currency in operating concern config, the field is greyed out. I believe there is  more complex workaround for that, but the only note I found on this is  651142 which says that SAP provides different tools to reorganize operating concern. But no further details are included.
    If anybody managed to change operating concern currency, please help me with that.
    Regards,
    Karol

    Hi Karol
    I read the note given by you.. It asks you to contact the SAP for SLO Service (System Landscape Optimization )
    This is a chargeable service by SAP... In case you decide to go ahead with this, do share your experience with us
    Create an OSS msg and give ref of this note... I would suggest to go with SAP service and not with any one else's experiences... The tools that SAP is talking about are available only with SAP..
    You may try to archive the existing data from COPA tables and then see if the currency field opens up for editing.. Am not sure about it..
    Regards
    Ajay M

  • Alternate Exchange Rate Type Not Picked while converting from Document Currency to Group Currency

    Hello Gurus,
    We have setup an alternate Exchange Rate type MNB for rate M for the postings happening in Hungary. Local currency is HUF. Group currency is USD.
    If the document currency is, lets say, EUR, latest MNB rate is correctly picked up (EUR to HUF) and postings are correctly converted into local currency (HUF).
    Although, for the same document, when a group currency is being calculated (EUR to USD), exchange rate type M is being picked up. Same happens if  document currency is HUF. Even then, the conversion is based on exchange rate type M.
    Is this a normal SAP behavior? How to prevent/correct this? This is also throwing off balances when we check in FAGLB03 or BSEG values in local and group currencies. In OB22, we have local currency1 and local currency 2 setup with exchange rate type M and we may not want to make any changes there as it is setup at global level.
    Do we need to run any valuations after the fact? if so, how?
    Thank you for your inputs in advance.
    Regards,
    Sagar

    Hi,
    You mentioned that "in OB22, we have local currency1 and local currency 2 setup with exchange rate type M". Then, I'm wondering how MNB is picked up for the first local curr. conversion to HUF? It should be 'M' instead. There must be some settings in your instance for such behavior. Can you check that?
    Actually, Group Curr. conversion happens with the rate defined for 2nd Loc.Curr.in OB22 which is 'M' in your case. Therefore, all the transactions are converted with M instead of MNB.
    Since you can't change OB22 per global co.policy, the exch.rate defined in OBA7 will overrule OB22. However, you've to make sure it's set up for all doc.types which are affected and posted in different curr. than HUF.
    As a workaround, another thought would be to maintain the same conversion rate for both exch.rate types MNB & M, for eg. HUF > USD rate is the same both exch.rate type MNB & M. This way, you ensure all transactions are posted with correct exch.rate irrespective of whatever rate type is used.
    From business, & global org. perspective, I'm sure they are sending the 'M' exch.rates to all their sister concerns monthly, so they would like to consolidate results as per standard rate in their system. Then, why ,as a local company, would you like to fiddle with standard process? It's a management decision, please run them through again before going ahead.
    Thanks,
    Nirav

Maybe you are looking for