Transaction to check Transport Request error
Hi,
I raised a transport request in R/3 to transport data sources.
My basis team informed to check the imported request in QA as it is imported with error.
which transactions do i need to check for that
Thanks
Hi,
go to your transport request in se01 and check the import logs.
hope this helps
Olivier.
Similar Messages
-
BRMS Connector - Transport Request Error
Hello BRF Experts,
We are created a BRMS connector expression, but when we tried to save it in a transport request, we obtain tha following message errors:
Might be an authorization problem; check Hot Package / S_CTS_ADMINHi Romina,
Thanks a lot for the info. I did take a look at the issue and found a bug. I will ask a colleague for a correction (note).
Can you pls create a customer message for us. Then we will attach the note to it.
Just copy & past this text into an attachment and create the message on component BC-SRV-BR.
The problem is that there is an SOBJ entry for the obsolete table FDT_EXPR_4002 but not for the table FDT_EXPR_4003.
There is a chance of a precorrection with transaction SOBJ
Position on FDT0000 and use the piece list button.
Insert FDT_EXPR_4003 to the list.
Must be repeated for FDT0001 with table FDT_EXPR_4002S and for FDT0002 with table FDT_EXPR_4002T.
The note will contain further explanations.
BR,
Carsten -
Releasing Transport Request Error.
Hi all,
I have created the Query Objects under a Transport Request in Development System and has to be transported to the QA system.
One thing i have observed is, when u create a Transport request for an Object.
Two Transport Requests will be created,
For Example,
If "A" object is assigned a new transport request 1, two Requests will be assigned to this Object "A".
Those requests would be 1 and 2.
But here 1 request is empty and 2 request is holding the Object "A".
So while transporting the request 2, even since 1 is assigned to the object, even it should be transported,
but im gettin the following message as below and hence the Transport cannot be done,
"Task 1(TR 1) is unclassified and does not contain any objects,
As soon as you include objects in the task/request, the SAP system automatically assigns a type to the task"
So can any1 plz help me out what was the error and my next steps to be followed.
Thanks,
SowrabhSowrabh,
It's like creating Task under one perticular Request no...
Go to RSA1-Transport comnnection _ Drag the query you are intended to transport and check whether all objects are under same request..If not change the Owner of the object to you userid and then try to create a request..
Cheer's
HVr. -
Checking Transport requests present in two different clients.
We have around 200 transport requests that have been transported by consultants from D01 to R01-client1/client2 and I need to check that which transport is present in which R01 system client.. i.e. a) how many of them are present in client 1, b) how many are in client 2 and c) how many are in both. We can check the logs of every transoprt through SE10 but Is there any quick/automated way of checking mass Transport Requests status ?
Dear Raichandi,
Please follow the below steps to get the desired information.
1. Login to D01 (Dev client) to find the released transports..
2. Execute transaction SE01
3. Go to "Transport" tab
4. Give User as "*"
5. Select "Request Type" by tick mark as Customizing Requests and Workbench Requests
6 Select "Request Status" by tick mark as "Released" only
7. Click on "Display Button"
8. It would display all the released transports requests.
9. From here you can copy and paste all these requests numbers in the spread sheet
(CTRL + Y) then use Mouse to select the requets, (CTRL +C), and then paste it in exel sheet.
1. Now Login to the R01 (QA client) to find the import status of the release transports from D01.
2. Execute transaction STMS
3. Click on "Import Overview (F5)" or the Truck Symbol.
4. It will take you to the Import Queues for the Import Domain D01.
5. This is the option where you can select the Queue to see the desired information for Quality/Stag/prod system.
6. Now double click on the required "Import Queue" for R01 (Quality system).
7. Now Go to "Import History or (CTRL+ F7)"
8. Change the Filters as required (may be for time interval or remove any filter on client -Clt)
9. The import History will display all the Imported requests in all clients in one system (SID), so for your case it will display requests for R01/client1 and R01/client2
10. Copy the same in the spread sheet...
11. Do the VLOOKUP to find which are not imported in which clients.
Please provide the feedback if it works.
Thanks,
Vinod -
Hi Team,
I am facing a error while importing a transport request. Whenever i import a request , i am getting a popup showing Predessor transport need to be imported . But my predessor Transport request is already imported.
Can you explain this why I am getting this POP?It is happening with all request whose predessor relationship has been defined.Hi,
Please make sure that there are no other requests from different projects. If this is not the case then you will find option Ignore Predecessor Relationships in STMS while doing import with this you can ignore predecessor relationship. But you will not get this option if there are any transport of different projects where predecessor relationship is defined.
Thanks
Sunny -
TMS Check Transport Tool Error
Hello Experts,
We have migrated the database from Informix(DEV old machine) to Oracle(DEV New machine) and found the system up and running fine except the DBconnect failed error when i run the STMS->system overview->select the system as DEV-->R3System->check->Transport tool.
Please find the error log herewith:
developertrace,0] Logon as OPS$-user to get SAPR3's password
developertrace,0] Connecting as /@DEV on connection 0 ...
developertrace,0] >oci_logon(con_hdl=0, user='', dbname='DEV')
dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'
developertrace,0] Try to connect with default password
developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
developertrace,0] >oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'
We have tried almost every option given in the SAP notes but couldnt figure out the issue. We are now not able to support PRD now as the DEV is not available. Can any one quickly help me in resolving the issue...
R3 -> 45B
OS: UNIX
Kernel: 45B_EXT
We are getting no error when we run R3Trans -x and R3Trans -d as well.
Please help us in resolving the issue ASAP...
P.S: If you could give your contact number, iam ready to call you and talk to you regarding the issue and can work upon this.
Thanks and Regards,
Mani
+91 934 749 6777Hi Ruchit,
Please find the trans.log file after I run R3Trans -x herewith:
4 ETW000 [developertrace,0] New connection 0 created 20 0.034731
4 ETW000 [developertrace,0] db_con_connect (con_name=R/3) 62 0.034793
4 ETW000 [developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
4 ETW000 89 0.034882
4 ETW000 [developertrace,0] -->oci_initialize 23 0.034905
4 ETW000 [developertrace,0] Got ORACLE_SID=DEV from environment
4 ETW000 42 0.034947
4 ETW000 [developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environme
nt
4 ETW000 29 0.034976
4 ETW000 [developertrace,0] Logon as OPS$-user to get SAPR3's password
4 ETW000 22 0.034998
4 ETW000 [developertrace,0] Connecting as /@DEV on connection 0 ...
4 ETW000 29 0.035027
4 ETW000 [developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
4 ETW000 31 0.035058
4 ETW000 [developertrace,0] Now I'm connected to ORACLE 62893 0.097951
4 ETW000 [developertrace,0] Got SAPR3's password from table SAPUSER
4 ETW000 1408 0.099359
4 ETW000 [developertrace,0] Disconnecting from connection 0 ...
4 ETW000 23 0.099382
4 ETW000 [developertrace,0] -->oci_logoff(con_hdl=0) 22 0.099404
4 ETW000 [developertrace,0] Now I'm disconnected from ORACLE
4 ETW000 1032 0.100436
4 ETW000 [developertrace,0] Try to connect with the password I got from OPS$-us
er
4 ETW000 25 0.100461
4 ETW000 [developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
4 ETW000 22 0.100483
4 ETW000 [developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
4 ETW000 22 0.100505
4 ETW000 [developertrace,0] Now I'm connected to ORACLE 40345 0.140850
So as this is not giving any error, i dont think this is a problem with sapr3 password.
Apart from that we suspect that there is some problem with the env variable ORA_NLS33... but couldnt get to the bottom of the problem...
Please find the trace file we got when we ran tp command:
[developertrace,0] db_con_connect (con_name=R/3) 64 0.058188
[developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
85 0.058273
[developertrace,0] -->oci_initialize 23 0.058296
[developertrace,0] Got TNS_ADMIN=/oracle/DEV/920_64/network/admin from environment
42 0.058338
[developertrace,0] Got ORACLE_SID= from environment 43 0.058381
[developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
29 0.058410
[developertrace,0] Logon as OPS$-user to get SAPR3's password
21 0.058431
[developertrace,0] Connecting as /@DEV on connection 0 ...
28 0.058459
[developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
30 0.058489
[dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'
2235 0.060724
[developertrace,0] Try to connect with default password 18 0.060742
[developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
23 0.060765
[developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
22 0.060787
[dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'
60464 0.121251
[ ,597] ***LOG BY2=>sql error 12705 performing CON 48 0.121299
[ ,597] ***LOG BY0=> 17 0.121316
[tpsqlora.c,1104] end: tp_connect 13 0.121329
Any help in this way is very much appreciative.
Best Regards,
Mani -
Transaction to delete Transport request
Hi,
Is there any transactions which will delete many Transport request in a single scratch.?.I have some 100 Transport requests which needs to be deleted.
Any inputs on this will be helpful.
Thanks in advance.
Regards,
Rajhi
good
I dont think there is any such TCode which ll delete your all transport request at a single scratch,you have to delete all your transport request one by one by using SE09 or SE10.
thanks
mrutyun^ -
Hi,
We are having a problem when checking the transport tool for our PRD system from the domain controller which is DEV system. Our landscape is this:
Our DEV system/server resides in one location, the QAS and PRD server resides on another location which has different network than DEV. Is that possible to configure the transport management system with that kind of landscape? And if it is okay for a transport route to be generated for the three systems?
When we check on the transport tool for PRD system from domain controller, we are getting inconsistent output. Please see attached screenshot.
Hoping for a prompt response.
Thank you!
Regards,
AJHi Deepanshu,
Yes i have configured it by including PS3 and QS3 in the domain system of DEV (Domain controller) and approved it their. but when i do the distribute and activate TMS configuration, QS3 and PS3 is interrupted. Please see below error:
And i again checked the RFC connections it is all working fine.
But when i check the transport tool for PS3 it says below error:
Thank you!
Regards,
AJ -
Help on Transport Request Error
In a client System while transporting from development to quality the following two errors ended with number 8
Please could you give cause and Solution
1. ABAP Dictionary Activation (manually the checked the tables and tables were activated)
2. Generation of Programs and Screens.Hi,
While transporting the Tables , we have to take the special care.
See to it all the data elemnts , domains are activated in the dev server.
While transporting the programs , screens etc we need to check whether all the dependant includes function modules etc are transported together.
some times the data elements ,Function modules etc may not be present or active in the quality server.
To find out that,you can check the log in the quality server.
Or in the dev server you can check the activation log for each server.
Feel free to ask any other info..
good luck.. -
Business Content objects transport request error
Hi gurus
We have installed the Business content for CRM in development. Now we have moved the business content objects to Quality, but the issue was all the objects went and they are in the unassigned node. First time the infoarea for the respecitve objects were not selected. In development already the info areas were there, so i didnt select the infoareas for quality. But in quality nothing is existing.So my question is if i select the objects again with thier respective info areas, will i get the objects again aligned in proper order in quality. As already objects are there in unassigned nodes in quality will effect the next transport.
please help me regards
vijaykumarHi,
<i>So if i collect the objects again for transport with the respective infoarea, will i get the objects from unassigned nodes to the respctive info areas.</i>
It will definately works.
By the by:
And also collect respetive Info object Catelogs also.So that Infoobject sits under proper Info area.Otherwise you will get same problem with IO(what you got with Cubes).
With rgds,
Anil Kumar Sharma .P -
Error while releasing transport request
Hi,
When i tried to release the transport request, it returning with code = 8 (error) so transport has not done. When I digged into the transport request, error message is
'unimplemented function REPC_OR_DELETE DOCUMENTATION'.
Thanks in advance.
Arvind...Hi,
This is more related to the BASIS side,
still have found one solution in one of the thread. Still contact you BASIS administrator for it.
Solution.
Is the error pointing at TP or R3trans?
In this phase, we get error coz of r3trans.
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Jayant Sahu -
Tcode to look for a transport request number
Hi all,
I have to look for request number details .I dont have access to SE01 . How can i look that details?Hello Priya
The standard transaction for finding transport requests is <b>SE03 </b>(choose option <i>Requests/Tasks -> Find Request</i>).
If you are not authorized to call this transaction try to execute the underlying report <b>RSWBOSSR </b>using transaction <b>SA38 </b>(menu <i>System -> Services -> Reporting</i>).
Regards
Uwe -
Critical objects in transport requests
Hi,
I know that's possible to check transport requests and detect if they contain critical objects, previously mantained in table TMSTCRI. But my question is if it's possible to block requests that contain this objects and prevent an import in the production system, for example.
Regards,
Joan
Edited by: Joan Baptista Altadill Elías on Feb 10, 2009 4:15 PMJi Joan!
... but you can prevent the release of such a transport request in the source system by maintaining the table with cirtical objects and by setting parameter CHK_CRIOBJ_AT_EXPORT into your transport profile.
For more details look here http://help.sap.com/saphelp_nw70/helpdata/en/54/39d73add219573e10000000a11402f/content.htm
and here ....
http://help.sap.com/saphelp_nw70/helpdata/en/60/e3fd03e36811d184810000e8a57770/content.htm
Hope this helps!
Regards,
volker -
Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request
Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_RS_PROGRAM_ERROR
Date and Time 08.02.2011 10:48:14
Short text
An exception occurred that was not caught.
What happened?
The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
along the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CL_RSDD_DS====================CP' has to be
terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
and therefore caused a runtime error.
The reason for the exception is:
Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
If the error occurs in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
"CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
"APPEND_DS_TEC_FIELDS"
System environment
SAP-Release 700
Application server... "dp1ci"
Network address...... "<removed>"
Operating system..... "HP-UX"
Release.............. "B.11.23";
Hardware type........ "ia64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 45
Shortdump setting.... "full"
Database server... "spisap02"
Database type..... "ORACLE"
Database name..... "DP1"
Database user ID.. "SAPBIW"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Dec 14 2009 20:47:35"
create on........ "HP-UX B.11.23 U ia64"
Database version. "OCI_102 (10.2.0.1.0) "
Patch level. 236
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 700
Operating system..... "HP-UX B.11";
Memory consumption
Roll.... 5979936
EM...... 0
Heap.... 1459888
Page.... 40960
MM Used. 6988880
MM Free. 415648
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "4D5111661004210BE10000000AFA2502"
Program............. "CL_RSDD_DS====================CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
in "APPEND_DS_TEC_FIELDS".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 61
of the (Include) program "CL_RSDD_DS====================CM001".
The program "CL_RSDD_DS====================CP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 10475900
Source Code Extract
Line SourceCde
31 RAISE EXCEPTION TYPE cx_rs_program_error
32 EXPORTING
33 text = 'Invalid DSO subtype'. "#EC NOTEXT
34 ENDCASE.
35
36 * get table name from DDIC
37 CALL METHOD cl_rsd_odso=>get_tablnm
38 EXPORTING
39 i_odsobject = n_infoprov
40 i_tabt = l_tab
41 IMPORTING
42 e_tablnm = l_tablnm
43 EXCEPTIONS
44 OTHERS = 1.
45
46 IF sy-subrc <> 0.
47 RAISE EXCEPTION TYPE cx_rs_program_error
48 EXPORTING
49 text = 'Error in CL_RSD_ODSO=>get_Tablnm'. "#EC NOTEXT
50 ENDIF.
51
52 CALL FUNCTION 'DDIF_NAMETAB_GET'
53 EXPORTING
54 tabname = l_tablnm
55 TABLES
56 dfies_tab = l_t_comp
57 EXCEPTIONS
58 not_found = 1
59 OTHERS = 2.
60 IF sy-subrc <> 0.
>>>>> RAISE EXCEPTION TYPE cx_rs_program_error
62 EXPORTING
63 text = 'Error in DDIF_NAMETAB_GET'. "#EC NOTEXT
64 ENDIF.
65
66
67 ELSE.
68 * model table only needed for standard datastore objects, for
69 * write optimized DSOs target table is a changelog that is fully described by
70 * dta_pro (infoobjects)
71 CHECK n_s_dta-odsotype = rsdod_c_type-standard.
72
73 * get model table fields to add
74 CALL METHOD cl_rsd_odso=>get_mod_tab
75 IMPORTING
76 e_mod_fld_ur = l_t_comp.
77 ENDIF.
78
79 * according to T.B. ( 13.04.2007) the correct position is
80 * not needed in the D version
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASETHi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David -
Error in creating Transport Request for a view table
Hello all,
I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
So I created a workbench transport in SE10 and included the following:
PgmID = R3TR
Obj = VDAT
Object name = ZVAITM_TBLE
But when I press enter, I encountered the following error:
No object definition exists for Customizing object ZVAITM_TBLE
Message no. TK427
Diagnosis
The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
This means that you cannot use the Transport Organizer to edit it.
System Response
The function terminates.
Procedure
First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
If the object does not exist, then create it or delete it from the request/task.
I am new to transports so I have no idea how to proceed.
Please advise.
Thanks a lot!
Cha ChaHello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek
Maybe you are looking for
-
Data recover from a hard drive error 301
Can anyone advise me of how to recover data from a hard drive error 301. I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data o
-
Connecting a DELL Dell SP2309W from anew iMac
OK I have a Dell SP2309W coming and I want to make sure I get the right connector to connect it from my new iMac24" to the DELL. Do I use this to go the DVI port of the DELL Mini DisplayPort to DVI Adapter http://store.apple.com/us/product/MB570Z/A?f
-
Sales report with Batch number & expiry dates
Hello friends, would any one please help me to frame this query to achieve the above .. my query is as bellow, but I want to add the batch number & expiry dates along with the other information..... SELECT T0.[DocNum], T0.[DocDate], T0.[CardCode], T0
-
I'm using Vista 32 bit and itunes 9. Don't want to upgrade to latest version. I made the transfer with the help of itunes, but now the music while in the new directory itunes doesn't recognise it. Any guesses? Thanks
-
Dear Experts, So far my knowledge a business place can be assigned to sales office and if the sales document is with some VAT Tax code it takes business place automatically. But I have sales which is free of tax. Please advise how to assign business