Transaction to delete unnecessary BEX objects

Hi all,
we are working in the Development environment.
in BEX Analyzer we have developed lot of test quieries and test objects.when i try to remove them in the analyzer it is not allowing me to do so.
can anybody suggest me how can i delete those unnecessary objects .what is the transaction.
regards
sri

Hi,
RSZDELETE transaction to delete queries and workbooks
Regards,
San!

Similar Messages

How to delete a Bex Query

Dear All,
I am trying to delete a bex query using tcode RSZDELETE and i also tried deleting directly from table RSZCOMPDIR. i am unable to delete.....is there any other option??????????/
Regards,
SV BHALAJI

Are you sure there are no work books build on this query and check if any of the other query variables etc are used in your query which you want to delete?
1. use transaction RSZDELETE
2. run program COMPONENT_REORG
3. go to query designer open the query and say delete.
To delete workbook .......SE37 > RRMX_WORKBOOKS_DELETE, but to use this you will need to technical names of the workbooks.

Deletion of auth objects Corresponding to tcodes

Q1.
If a transaction is deleted from the menu wthr the Corresponding authorization objects are deleted.
Q2.Eg
What if the tcode MM02 is deleted from the role which has MM01/MM02/MM60/MM03 transaction codes, In this case some of the auth objects of MM02 are same as the other tcode auth objects, then how does deletion of MM02 from role ensure that only the corresponding object--> values are removed.?
Rakesh

Q1.
If a transaction is deleted from the menu wthr the Corresponding authorization objects are deleted.
It depends..
If the auth object's status is 'standard' and it is coming from only one t-code which is being removed, then it gets removed. If the status is 'changed', then it doesn't get removed.
Q2.Eg
What if the tcode MM02 is deleted from the role which has MM01/MM02/MM60/MM03 transaction codes, In this case some of the auth objects of MM02 are same as the other tcode auth objects, then how does deletion of MM02 from role ensure that only the corresponding object--> values are removed.?
No, the auth object won't get removed as that is coming from su24 from other t-codes also.
If different t-codes are bringing different field combination values, then the instance which is coming from MM02(if it is being deleted) will get removed, again assuming that the instance is standard and not changed.

Transaction code to repair/check objects

Hello
Can somebody remind me transaction code to repair/check objects in BW?
Thanks

hi
you can use rsrv. it is for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.

Transports: BEx Objects

While trying to transport some bex objects, I had to attach them to an existing Request. Is there a way I can create my own request for Bex Objects ??

Farhan,
go to RSA1->Transport Connection->BEX (button with truck)...here you can see if you already have an available BEx request...if not create from this screen and then use it when the system gives you the option to choose a request...if yes, you can use this request to put your BEx objects ! (but in this last case, I would suggest to you to delete it from SE10 since you can run the risk to transport undesired object in your production environment!)
Hope it helps!
Bye,
Roberto

Mac creates a save every hour, quickly filling the external drive. The "delete unnecessary files in Trash" does not work.

How to make the Mac do save at certain intervals?
Why would I want five saves the day?
I try to delete unnecessary files to free up space.
Trash on the Mac has become very slow, the removal process was take hours.
Then the process of removing all stops.
Why files are not removed through the trash?
What could be causing the removal process?

TimeMachine is designed to back up every hour. It saves only the files that have changed during the hour. After 24 hours TimeMachine culls the (up to) 24 backups to make a single backup for the day. After 30 days it takes the 7 oldest day backups and culls them into a single week backup.
You should never manually touch files in the TimeMachine backup. It doesn't like that. The best practice for TimeMachine is to devote an external drive to TimeMachine and nothing else. Because TM backups are incremental, it is recommended that your TM hard drive be 2-4 times larger than the amount of drive space your computer is using. In other words, if your 1TB hard drive is 1/4 full (250GB in use) you should have a TM drive between 500GB and 1TB depending on how much more data you expect to add to your drive and how long you wish to keep old back files.
Having said all this, you might prefer using some other program for backups. CarbonCopyCloner and ChronoSync are two programs you might want to look at.

*How to Delet one same object from different roles*

I need to delete one auth object from different roles, Couls any one please advise me how can i do this and if there will be any complications involved with tis.
Best regards:
Maq

In PFCG, it may be that you have added some objects manually. To remove them you will have to go to pfcg.
Even if you first remove the objects from su24, you will have to go to all the roles through pfcg to generate them in expert mode by selecting the third option (edit old status and merge with new data)

Report or Function Moule to delete a BEX Report ?

Hi,
is there a program, report or function module to delet a report ?
Thank You
Best Wishes
Martin

Hi martin ,
U can able to delete the query from BEx query designer or from BI.
IN sap Bex query designer, just by opening the query menu -->delete query .
the other way to delete the query is BY using the table RSZDELETE . with that u can able to delete the bex query, CKF, RKF etc..
plz follow the below link for detail
http://dev.diditho.net/2010/07/05/sap-bw-copy-delete-query-and-workbook/
Thanx
Edited by: Ravichandra.bi on Aug 22, 2011 8:14 PM
Edited by: Ravichandra.bi on Aug 22, 2011 8:19 PM

Batch Delete on Custom Objects

I have only just noticed that there is no batch delete on Custom Objects. I have read over the R16 release notes and I cannot see this as an enhancement, is anyone able to confirm if this functionality is actually included in R16.
As this is only a few weeks away before we upgrade.

Hi, I have an R16 account and i dont see the batch delete feature available for custom object :-(
-- Venky CRMIT

Mass Deletion of Rental Objects

Hi,
I have to delete all Rental Objects approx. 100+. Is there any way I can perform that quickly?
Thanks
Atif

Hi,
You can see two text boxes in the left pane of RE80 Transcation, In the first box enter "My Objects" Second text box enter "User ID of the Creator". Then system shows list of all rental objects, from which you can select and delete as explained above. These two boxes are visible only if you are using latest GUI.
Note: In the customization of RE-FX. SPRO-> Tools->Archiving->Deletion of Real estate objects without Archiving check box should be flagged to delete objects.
Thanks,
B.

Can we lock down the system for BW object and not bex objects

Hello,
I have a question about object changeability. We want to lock down the BW production system but leave it open for adhoc query. Can we lock down the BW system only for few objects like Cubes, ODS, Infoobjects, Infosets, Multiproviders, and keep the system open for Bex objects like Query, varaibles and also for Infopackges and DTP's.
Which tcode can we use for this ?
Thanks,
Message was edited by:
Kiran Mehendale

hi, usaully production system will be non changeable for all objects.. but as far as SAP BW is concerned we can make certain objects changeable by setting as follows..
in production go to RSA1 - Transport Connection, select Object changeability button from tool bar, here you will find a list of objects which can be made changeable in a closed system.. just click on required objects and set it to Everything Changeable..
Reg,
Pradhiba
<REMOVED>

How to transport deletion of bw objects?

I have transported an InfoCube to my test server. However, now I wish to delete that InfoCube. What is the proper way to delete a bw object in the QA environment? Do I delete the bw object in the development server, then somehow attach the deletion to a request? Or do I have to delete the object direclty in QA?
Thanks,
- B

Hi Brendon,
Once an object is transported, you need to delete it using a transport as well. When you delete your object in Dev, the system will prompt for a transport request. You can then import this in your QA (and prod) system. It is not advised to delete directly in Q, moreover the systems settings would prevent this in most companies.
Hope this helps...

Need transaction code for opening Bex query designer?

Hi ALL,
Can anyone help me with the transaction code for opening Bex query designer?
Like RRMX for Bex Analyzer similarly i want for Bex query designer.
Thanks & Regards
Sameer Khan

THERE IS NO TCODE FOR QUERY DESIGNER. BUT THERE IS AN ALTERNATIVE..
OPEN BEX ANALYSER THROUGH RRMX
OPEN A QUERY
CLICK ON TOOLS-> EDIT QUERY
THIS OPENS QUERY DESIGNER AND YOU CAN USE IT NORMALLY..

Delete all the objects in a package

Hi Guys,
My requirement is that i need to write a program to delete all the objects in a package. In the selection screen i enter the package name and then i get all the objects in the package from TADIR table and display them in an ALV.
There when i select a object and press the delete button ,the object (program ,table, domain,data element etc..) should be deleted .
For this i tried to DEBUG in SE80 and tried to know how SAP is trying to delete the object. But i couldnot unterstand which Function Module or which Class and Method it uses to delete an object.
Guys please let me know how it can be done.
Regards,
Chaithanya.

hi
check this ...
REPORT zxxxxxx.
TYPE-POOLS: slis.
DATA: x_fieldcat TYPE lvc_s_fcat,
      it_fieldcat TYPE lvc_t_fcat,
      g_grid    TYPE REF TO cl_gui_alv_grid,
      x_layout TYPE lvc_s_layo,
       g_custom_container type ref to cl_gui_custom_container,
        g_container type scrfname value 'I_CONTAINER'.
types: BEGIN OF ty_itab ,
        check(1) TYPE c,
       PGMID LIKE TADIR-PGMID,
             END OF ty_itab,
data:itab type standard table of ty_itab,
       itab1 type TADIR.
call screen 100.
*&      Module STATUS_0100 OUTPUT
      text
module STATUS_0100 output.
SET PF-STATUS 'ZSTATUS100'.
if g_custom_container is initial.
    create object g_custom_container
           exporting container_name = g_container.
    create object g_grid
           exporting i_parent = g_custom_container.
SELECT PGMID
FROM TADIR
   INTO CORRESPONDING FIELDS OF TABLE itab where DEVCLASS = selection screen package
x_fieldcat-fieldname = 'CHECK'.
x_fieldcat-seltext = 'CHECK'.
x_fieldcat-checkbox = 'X'.
x_fieldcat-edit = 'X'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 1.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'PGMIDt'.
x_fieldcat-seltext = 'PGMIDt'.
*x_fieldcat-edit = 'X'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 2.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
CALL METHOD g_grid->set_table_for_first_display
EXPORTING
    IS_LAYOUT                     = x_layout
CHANGING
    it_outtab                     = itab
    IT_FIELDCATALOG               = it_fieldcat.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
module USER_COMMAND_0100 input.
DATA: ls_outtab LIKE LINE OF itab.
DATA: l_valid TYPE c,
      ok_code like sy-ucomm,
       r_ucomm LIKE sy-ucomm,
       ls_celltab TYPE lvc_s_styl,
      lt_celltab TYPE lvc_t_styl,
      l_index TYPE i.
CALL METHOD g_grid->check_changed_data
IMPORTING
    e_valid = l_valid.
IF l_valid EQ 'X'.
case sy-ucomm.
when 'DELETE'.
LOOP AT itab INTO ls_outtab where check = 'X'.
   move ls_outtab-object to itab1.
delete TADIR from itab1.
ENDLOOP.
endcase.

How to delete previous version object?

Hi Experts,
Unfortunetly am create version ?how to delete previous version object in functin group?
Thanks&Regards
Rahul

Hi
there is no 'official' way of doing this.
the versions are maintained in VRSX2 table. you may do something there.
Pushpraj

Transaction to delete unnecessary BEX objects

Similar Messages

Maybe you are looking for