Transaction to execute the Web Application Designer
Hello,
Is there a transaction to execute the Web Application Designer? (In the same was that RRMX executes the BEX Analyzer.
thanks,
Allan
definetly not.
There is no mechanism possible like in Analyzer. This is a limitation of design of the WAD.
Best regards.
Kai Wachter
Similar Messages
-
Were can we add the commands in the web application designer in bi 7?
Hi all,
Can anyone let me know what are all the web items in which i can add commands in web appln designer in bi 7.
can anyone provide me some sample examples for adding commands in the WAD in bi 7,0
Thanks
PoojaHi Pooja,
Use this link to have better idea...
http://csc-studentweb.lr.edu/swp/Berg/articles/NW2008_BI_tool_guide_v7.ppt#322,28,Command Wizard and JavaScript
Thanks,
Ajay -
Item alignment in the Web Application Designer (3.5)
Hi to all,
I am creating a web template in WAD which has 2 tables (each of them is on different data provider). When I run the template, reports (tables) are aligned from the left side.
Does anyone know whether it's possible to change this and have the alignment on the right side instead?
Any assistance is highly appreciated!
CheersWe should have mentioned that the HTML code similar to example below, will right align the entire table placement on the page, but the individual columns inside the table have their headings left aligned, no matter what we do. We have not found a way to right-align the column headings inside of a table.
Note, we added the comment tags around the 2 - P-tags below to prevent the example from heading toward the right margin below. (In other words, the comment tags should be removed, but leave in the P tags.)
<TR>
<TD vAlign=top>
<!--<P align=right>--
>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="SHOW_PAGING_AREA_TOP" value="X"/>
ITEM: TABLE_1
</object>
<!--</P>--
>
</TD></TR> -
How to create the Web application designer
Hello BW Guru's,
how to create the WAD... step by step procedure and where to save the report and how to excute the report.
please send as soon as possible.
Thanks
Sudhahi,
you can also refer to the following links.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f11a7e3-0601-0010-52a2-c3fbbdb068da
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a8cd1f71-0a01-0010-4783-f119b6132d25?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078 [original link is broken]
hope it helps,
regards,
Parth. -
Error during conversion in the web application designer 2004s?
Hello there,
When I'm converting a template from 3.1 to 7.0(2004s) whit the migrationtool, I get an error whit a big screen. Then the WAD closes down. I can ignore, retry or break down. Does somebody know what the problem is?I have done other queries and they converted good. It is a query whit selections and formulas. I've tried anything. could someone help me?hello there,
I solved the problem by creating a new template in 3.1 and added the table. after that, i used the migrationtool, and it worked fine. does somebody know why it is like that? -
Web Application Designer - DROPDOWN_ITEM
Hello Gurus,
I have the following error:
u201CNo reference To data provider definedu201D when I execute a web Template.
u201CIn the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZZ_VENDAS_002 for Web item DROPDOWN_ITEM_1 to a valid data provideru201D
This error doesnu2019t make sense because the web template doesnu2019t have any DROPDOWN_ITEM. I have a different web template with DROPDOWN_ITEM but not this one.
Thanks in advance,
KenpsHello Carlos,
Have a look at this Note
SAP Note 901213 BI 70 SP6 dropdown box: No reference for Data Provider
Thanks
Chandran -
Expert on web application designer comes in!
Hi Colleagues,
Here is an issue on the web application designer. i want to use the exception showing function (red light, green light) with the help of the web application designer. So firstly, i set some exception in the query and on the web application designer, i choose "exception visualization" as "symbol". Then i save the web query and execute, the exception shows, but in a arrow trend way, not the red light or the green light. It seems that the tool has by defult set arrow trend as the 'symbol'. But from the exception details, i find there are 2 options for 'symbol': status (one i want) and arrow trend. How can I change the default setting? Thanks.
If necessary, we can have a netmeeting.
Urgently waiting for ur reply.
Best Regards,
ClarkHi Clark,
You have to implement the module com.sap.ip.bi.rig.ExceptionImage.
Select the Analysis Web Item -> Web Item Parameters -> Internal Display
Select Modification -> Single Module
Implementation Name: com.sap.ip.bi.rig.ExceptionImage
Select Type as Generic Module
Set the Parameter Name based on the Alert Level set in the Query Exception.
For example :
Green u2013 ALERT_3 (Alerts 1 to 3)
Yellow u2013 ALERT_4 (Alerts 4 to 6)
Red u2013 ALERT_8 (Alerts 7 to 9)
Since you want to display the Traffic lights in the Web Report, select Image as the Value from the dropdown box.
Provide the URL for the images stored in the MIME Repository depending on the Alert Level.
Green - bwmimerep:///sap/bw/mime/BEx/Icons/s_s_ledg.gif
Yellow - bwmimerep:///sap/bw/mime/BEx/Icons/s_s_ledy.gif
Red - bwmimerep:///sap/bw/mime/BEx/Icons/s_s_ledr.gif
The images will be stored in SE80 -> Mime Repository under SAP -> BW -> BEx -> Icons
Green - s_s_ledg.gif
Yellow - s_s_ledy.gif
Red - s_s_ledr.gif
The Exception Visualization drop down in Cell Content Area of the Analysis Web Item should be set to display Symbols.
If this is not set, the Report would continue to display Exception Colors in the cell background.
Hope this helps.
Regards,
Hari.
Edited by: Hari Krishnan K on Aug 12, 2010 11:05 AM -
Error in Web Application Designer
I hope that somebody can help me, we migrated the system BW of version 3.1 to 3.5, but when trying to enter the Web Application Designer throws the following error:
you are logged on to application server that does not support HTTP
thank'sHi,
Goto transaction SMICM and see if the ICM is active: Do you see a Red or Green light here? If Red, then use menu Administration > ICM > Restart > Yes
Check the services (Shift+F1) and see if HTTP is active.
Hope this helps... -
URL link in rows/colomns of a report web application designer.
Hi,
I would like to create a URL link in a report which jumps to documents on livelink.
For example:
1. bw 30.000 www. google.nl
2. sap 40.000 www. sap.com
3. basis 50.000 www. nu.nl
etc.
etc.
Do all the rows have different URLS, is that possible in the web application designer? Or do I have to use RRI? Or a user exit?
Thanks for your help en replies.
Rishma.
Edited by: R. Debi on Oct 7, 2010 11:20 AMI used the RRI already but would like to have a hyperlink in the report. (So, the prefix of the URL is always the same an I have put this in RRI and used the & and contract ID as dynamic part of the URL.)
In a BW web report, our customer would like to display a characteristic value as a hyperlink, so that when clicking on the link, the user is taken to an external website holding a document. SO I am just looking for a javascript perhaps? Or maybe even abap in transformation? To actually create the hyperlink in this report.
Thanks a lot,
Rishma -
Web Application Designer: Column width on analysis_item with BW 7.0
Hi,
I'm new to SAP world and I have found a problem I'm not able to solve. I'm working with the Web Application Designer and I want to modify the cell properties (such as cell width) for aligning different queries. In fact, my question are:
<b>
1. Is it possible to hard-code/specify column widths of the analysis_item?
2. The property width of the analysis_item doesn't work, does it?
</b>
Thanks for your time and efforts.
Message was edited by:
Daniel RubioHi,
I have just discovered the capability of modifying columns widths with css properties.
So if I add to the head section of the html:
div.prueba2 .urSTTDBdr1
div.prueba2 .urSTTDBdr
div.prueba2 .urSTTDBdr2
And later I put the AnalysisItem between a div class="prueba2" and /div, the columns widths are changed.
Do you know where can I find all the style properties (such as urSTTDBdr1) and its functions?
Thanks -
Security for creating web templates using web application designer
I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in addition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexacoThanks Marc, I'll check it out. My problem was that I was trying to create the role by granting a userid sap_all, sap_new and s.a_system as well as power user auths for a specific application. I set up a trace in ST01 for authorization cking on the ID while one of our BW Central Support people went into Web Designer to create a template and everything else they wanted to do.
The resulting trace spewed out so much stuff from S_RS_comp and comp1 as to be virtually useless since it named scores of different cubes and infoareas that the analyst wasn't even interested in. The results puzzled me and made it extremely difficult to pin down the required authorizations. Usually ST01 can be used as a blueprint to create the role,ie; everything that the user touches is traced but no more than that. Have you seen this before? With just the new role I had set up the user could not save to a role unless I coded the fully qualified role name such as YRH_SENDAT_USER. YRH* would not work.
Thanks,
Jeff Ehritt
ERP COE SAP BW Security -
Security For BW Web Application Designer
I work for ChevronTexaco as a BW Security Analyst. I have a request to set up roles for web template creation using the Web Application Designer. Where can I get help in setting up the security for these types of roles? My experience is in setting up roles for running and creating queries in BEX. I need to know what additional authorizations will enable web template creation. Setting up a trace in ST01 has been less than helpful since it dumps out tons of RS_COMP tracing that doesn't help me much.
The user wants to be able to create web templates for existing queries in BEX and restrict by rs_comp infocubes/areas/reportid, etc. and to be able to save to restricted role names. Are there new auth groups specific to this type of activity that I need to code for in adition to the basic end user or report builder authorizations?
Any help would be greatly appreciated.
Jeff Ehritt
925 827-6012
ChevronTexacoHi Jeff,
there are no special authorization objects for Web Templates. RS_COMP will still only work for queries, structures.... Saving to roles requires certain authorizations for the role (s_agr_*), here you can define the roles you can save templates to.
Regards, Klaus -
Web Application Designer -Unknown Error Occured during Portal Communication
we are getting the below error while using the Web Application Designer .
"Unknown Error Occured during Portal Communication"
Vesrion
SAPBW 700 SP14 on ABAP & SP12 on JAVA.
Found the below error in the default trace
Error 1
Exception thrown Fri Aug 15 11:29:15,070:Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXYnot found on host smy14sap99, ProgId =SMY14SAP99_PORTAL_BD1: Object not found in lookup of RSWR_PREEXECUTION_PROXY.
Error 2
Error> occured >Fri Aug 15 11:29:12,413<
RfcException:
message: 'ashost' is missing
Return code: RFC_INVALID_PARAMETER(19)
error group: 101
key: RFC_ERROR_PROGRAMHello,
Have a look at these Notes
SAP Note 988484 RC=12 in after import method for objects BTMP and BITM
SAP Note 916090 RFC-error messages in Web Application Designer 2004s
Thanks
Chandran -
Unable to open WAD (Web Application Designer) SAP BW 3.x
Hi experts
In my computer I don´t open WAD (SAP BW 3.x)
i make click start-> programs -> Business Explorer-> Business Explorer(SAP BW 3.x)-> Web Application Designer(SAP BW 3.x)
appears following error:
This application requires Internet Explorer 5 or higher
but I have installed the Internet Explorer 8 version
then I do not understand because can´t run the WAD 3.x
Can anyone help me? please
ThanksHi ashutosh
the following information of SAP GUI:
Component: SAPLogon for Windows
Release: Final Release 720
Fichero: saplogon.exe
vers.Fichero: 7100.4.17.1045
Build: 1147943
Patch Level: 17
whether if it is which version of WAD but I am interested in running and to open the Web Application Designer in any of the versions: 3.x or 7.0, but the important is that can be work with some WAD model because in version Web Application Designer 7.0 is enable pero when i search some WAD model (I know that it exists in the system) The system search says it does not exist or no found.
I can't try uninstalling because I'm not a support person so I have not authorization, I'm a consultant and only want to work with WAD models -
Starting Web Application Designer
Is it possible to start the BEX Web Application Designer from GUI? I know you can start BEx Query Designer by running RRMX. Is there a similar command in BW GUI that also starts the Web Application Designer?
Thanks.Hi,
There is a no tx code to open WAD.
You have open via srart ->Bex Explorer->Web application Designer.
Thanks,
Michael
Maybe you are looking for
-
ITunes has encountered an error and needs to close XP SP3
Hello everyone, I know you might have discussed this before, but I could not get the right discussion about it. So yesterday, my windows decided to go from XP SP2 to SP3. Internet Explorer got installed and now everytime I try to open iTunes I get th
-
Can't change settings in Project Settings dialog
Hi, I'm using the CS4 version of Premiere Pro and Encore on Windows 7. I started with footage from an AVC HD camera. I brought it into Premiere Pro and created a sequence from the "AVHCD 1080i30 (60i)" preset. This results in a 1920x1080 frame wit
-
Hi, When I Right-Click on my BI Chart I get both the Chart Context Menu and the IE Context Menu. And of course the Chart Menu is 99% blocked by the IE Context Menu. I can just barely see the edge of the Chart Context Menu and I can get it to take f
-
Photoshop isn't detecting my Graphics Card
I recently installed a Radeon R7 240 graphics card and am still having problems with CC. Everytime i start it I received the "3d features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system." I have 2GB of VRAM.
-
White Screen Of Death, Unfixable - Curve 8520
Okay, I've Had It Before, I Took The Battery Out, Then Back In And It Worked, But This Time I've Had The Battery Out For 30mins, The Put It Back In, And It Just Went Back To The White Screen. I've Also Tried The "c:\program files\common files\resear