Transaction to see Networks/Orders and Activities in PS module ?

Hi everybody
Does somebody knows the transaction codes where can i see the Networks(Orders) and Activities for some Project - WBS in the PS module ?
Thanks
Frank

Thanks Robert
I was checking these transactions. Actually i don't know so good the concept about Networks(Orders) and Activities.
Are the Networks(Orders) related to specific WBS ? Then how can i get these link ?
Are the Activities related to specific Network(Order) ? Then how can i get these link ?
I really need help !!
Thanks in advanced
PD. Points are guaranteed for you in this topic, if yow know the answer for the new questions please help me, and i will to open anhoter topic to give you the points too.
Regards
Frank

Similar Messages

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Different user status profile for network header and activities

Hi everyone!
Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
Thanks!
Regards.
Edited by: Thalos on Jul 2, 2011 12:27 AM

Hi Punith, Hi abdul!
Thanks for the reply!
I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although they will only use some of them.
Thanks!
Regards,
Thalos.

Hi, my wifi set up is Extreme, Express then iMac. All showing solid green status. Airport utility showing no connection tho? i can see network name and use homesharing too. why is it showing this?

Hi, my wifi set up is Extreme, Express then iMac over 3 floors. All showing solid green status and iMac (showing full signal wireless). However, the Airport utility is showing no connection? I can see the network name and use homesharing too. why is it showing this??

I dont follow the problem?
By the way, i hope you have those all set on non-interfering frequencies. e.g.: 1,6,11
Grant

How to assign version in sales order and transfer to PP module

Hi all
Users say that customer will require to produce/deliver old goods (we active revision level. The newest material version is D. But customer want version B). How to assign version in sales order and let PP user know the version customer want (MRP run and production order must use version B's BOM)?
Regards,
Rita

Hi,
i have a query if you have implimented ECM this will serve the purpose but it also depends on how good the planning is, in ur client site ( out of SAP ) where planner will plan according to the customer requirement as to which version to be kept active for a date range.The ECO analysts(functional) or consultants will make the ECO changes for those dates.
In general for those type of customers (who needs old version) a different SO created under different document type which will create a production orders with specific order type depending on the assignment of requirement type and requirement class.
those specific production ordertypes can be inturn assigned to either different plant where your old version BOM's will be active.
You need to look into the custom settings in SAP to design the larchitecture to allign with other requirements.What i explained u is common methodology used.
Hope this is clear..
Prakash
Message was edited by:
prakash Uddagatti

Cannot see Networked computers and problems with WEP sign in

I recently installed a new HD (SAMSUNG HM500LI) into my 2.16GHz MacbookPro running 10.5.5 and transferred all my files using Apple's Migration Assistant.
Everything seems to have been working fine until I tried to log in to a friend's wireless network using a WEP password. OSX gives me the error message "Commection Timeout". I can however connect to other unsecured wireless networks on the list.
I have tried deleting the keychain access for the WEP network and reentering the correct password, but no success.
What I have also realised is that I cannot see other macs on my Network in finder any more.
Another point worth mentioning is that the Parallels NAT and Guest in Network preferences (for Parallels virtualisation software) have now automatically been renamed to Ethernet... (en2) and (en3).
I still have my original harddrive in an external casing and booted from that and everything worked perfectly - I can both log onto the WEP wireless internet and see other macs in my vicinity.
Can anyone help me here please? Are there maybe some settings that weren't migrated with the assistant? Could it be that my file sharing settings need altering? Did I maybe not format the new drive correctly (I just erased the new one and formatted it in Mac OS Extended (Journaled))? Has a recent Apple update maybe upset something, and if so, is there a way to uninstall it?
Thank you in advance.
Robert
Message was edited by: Robbie1702
Message was edited by: Robbie1702

Hi Robbie, and a warm welcome to the forums!
Have you done any Maintenance since installing?
If not, at start with this...
Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, move these files to the Desktop.
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
Then delete the orignals & reboot once more.
On the WEP PW, try putting a Dollar Sign in front of it, like...
$xxxxxxxxx
Also, is the WEP PW exactly 5 or 13 ASCII, or 10 or 26 HEX characters?

Airport Express and iPhones can't see network-macs and ipad can?

I have an Airport Extreme base station connected to a comcast modem, with 2 express units for airtunes.
After some fiddling around due to the comcast outage, now I can't see either of the Airport Express units in the Airport Utility, AND neither my or my wife's iPhone can see the network. The iPad, iMac, Macbook and a PC can all connect no problem. My phone connects to wifi at work no problem.
Any thoughts are greatly appreciated!

Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Your settings should look like this:
Wireless Mode = Create a wireless network
wireless Network Name = Name of your wireless network
Check mark not needed next to Allow this Network to be extended
Radio Mode = Automatic
Radio Channel = Automatic
Wireless Security = WPA2 Personal
Wireless Password = Backspace and retype your password here
Confirm Password = Backspace and retype your password
Click the Internet icon
Connect Using = Ethernet
If you have a simple modem (only one ethernet port), the setting for Connection Sharing should be set to Share a public IP address
If you have a gateway (combination modem and router with 3-4 ethernet ports), the setting for Connection Sharing should be set to Off (Bridge Mode).
Update to save changes
Restart all other devices
Any luck?

Cant see my Configuration and Activities list in DeveConfPers

Hi SCN Team,
I opened NWDS and switched to Development Configuration Perspective.
I imported the configuration into NWDS and created the Project
I created an Activity as well.
Now When i went to check-in the activity it is not showing up in the open Activities List.
Now i closed my NWDS and re-opened again
Now i dont see my Configuration under InActive DCs as well.
Not knowing why this strange behavior. Can anyone let me know where exactly the issue could be

Hi Ervin,
I checked the parameters suggested by you. But nothing worked.
If i swtich to a new workspace, Then my activities will not be seen.
Below is the error log which i see in NWDS Logs. Not knowing how to solve the below issue.
DTR client definition not found for this configuration. VFS client-def name: TrackName_D
!STACK 0
com.sap.tc.devconf.InvalidDefinitionException: DTR client definition not found for this configuration. VFS client-def name: 'TrackName_D'
at com.sap.tc.devconf.DevelopmentConfigurationFactory.upgradeLocalConfigurationMode(DevelopmentConfigurationFactory.java:1537)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.reInitializeConfiguration(DevelopmentConfigurationFactory.java:567)
at com.sap.tc.devconf.DevelopmentConfigurationFactory._getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:420)
at com.sap.tc.devconf.DevelopmentConfigurationFactory.getDevelopmentConfigurationInstance(DevelopmentConfigurationFactory.java:199)
at com.sap.ide.eclipse.component.devconf.DevConfManager.getInstalledDevConfs(DevConfManager.java:411)
at com.sap.ide.eclipse.component.devconf.DevConfManager.initializeDevConfs(DevConfManager.java:135)
at com.sap.ide.eclipse.component.provider.listener.DevConfLoginListener.loginPerformed(DevConfLoginListener.java:86)
at com.sap.ide.login.UserValidator$1.run(UserValidator.java:161)

I purchased adobe lightroom years ago. I see the order and the serial number on my account. I need to download it again. When I try, it shows I have nothing to download. Where has it gone?

I'd rather speak to someone by phone but can't find any way to do that on the site. Can someone help me????

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

About ALE transaction set 860 (purchase orders) and Idoc type ORDERS05.

Hi all,
What is the mapping between the two? How can I find more about the two..
Thanks,
Charles.
+++++++++++++++++++++

Hi,
Guess it looks like the output is getting proposed but its not getting processed. Check the output type configuration. Check the TIme Settings in the output type configuration.
It is possible to set the Time when the output must be processed. Is it on SAVE or is it set to other settings. If its set to via background job then the background job must be run to process the output types.
Check and let me know if all is fine at the output type configuration.
Cheers
VJ

ISA contact can not see the Order made on oneSoldto and can check for other

Hi All,
i've one peculiar prob...in which assume X is the ISA contact person for two sold to parties Y and Z.where as the role is the same for X he cd able to check the orders he created for Y and cd not able to see the same for Z.please let me know how peculiar is the prob and what cd be the reason for this.
Thanx in advance,
Sarath

Hi Sarath,
How is the contact person X entering the webshop? I mean before entering the webshop the list of customers Y & Z for X will be displayed for selection. If contact person selects Y then he only be able to see Y orders and not of Z. This is a very much standard process in ISA. If you want to show both Y & Z orders then you need to modify the ISA functionality. Or in CRM5.0 ISA you can achieve somewhat similar functionality by using customer hierarchy functionality.
<b>Reward if helps,</b>
Regards,
Paul Kondaveeti

Sales order and Item no is not appearing in the Notification

Dear Experts,
1] While Creating notification through Q1 Notification type I am entering sales order and Item No under Processing tab,And I will save the same.
When I go QM02 transaction the entered sales order and Item No will not be available.
2] While Creating notification through F1 Notification type I am entering sales order and Item No under subject tab And I will save the same.
When I go QM02 transaction the entered sales order and Item No will not be available.here also the enter sales order and item is not available.
Please suggest how to get the same.
Thanks in advance

Dear All,
Please find the below steps the way I have constructed the Notification.
Go to Transaction QM01
In the Initial screen enter Notificaiton Type as 'EC'
Then Press Enter you will get in to screen.
Under "Subject" Tab
Enter Problem by selecting F4 drill down menu
Enter Department selecting F4 drill down menu
Then Go to Next Tab "Reference Objects"
Here Enter Sales Order as '45000031' and in the next field '10000' and Finally Save the transaction.
and Note down the Notification Number.
Then Go to next transaction QM02 [Notification Change]
Enter the generated Notification No.
And Go to Tab "Reference Objects" , Here see the already enter 'Sale order- 45000031 and 'Item-10000' Which will not be appearing.
Please suggest.
Your Quick responce is highly appreciated.
Thanks and Regards

Purchase orders and sales documents

hi what r the transaction codes for purchase orders and sales documents.

Hi Mohan,
ME2C Purchase Orders by Material Group
ME2J Purchase Orders for Project
ME2L Purchase Orders by Vendor
ME2M Purchase Orders by Material
ME2N Purchase Orders by PO Number
ME2W Purchase Orders for Supplying Plant
VA03 Ccreate Sales Order
VA03 Change Sales Order
VA03 Display Sales Order
Regards,
ok

Cannot see networked PC's

I have an issue where 10.6 doesnt seem to perform automatic discovery of my pcs on my home network.
Whether this is a router issue or not, im not sure but the issue has happened twice and have since replaced my router for a different one and the issue is still the same.
The router im now using is a virgin Superhub - http://help.virginmedia.com/system/selfservice.controller?CONFIGURATION=1002&PAR TITION_ID=1&TIMEZONE_OFFSET=&USERTYPE=1&VM_CUSTOMER_TYPE=&CMD=VIEW_ARTICLE&ARTIC LE_ID=345044
which i beleive is a netgear powered router.
My Mac is :
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.5 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBP41.00C1.B00
SMC Version (system):          1.27f3
Sudden Motion Sensor:
State:          Enabled
running 10.6.7

Hi Mark,
Please make sure the following services are enabled:
- TCP/IP NetBIOS Helper service
- DNS Client
- Function Discovery Resource Publication
- SSDP Discovery
- UPnP Device Host
For more detailed information, please see:
Network Discovery and File Sharing Won't Stay On
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/network-discovery-and-file-sharing-wont-stay-on/a12402a4-2826-4a0e-9b5b-45918ce33ef2
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Transaction Code for Purchase Order with Network, Activity, and Element

I have been asked for a transaction code that will allow the user to view the Purchase Order, Network, Activity, and Element on the same transaction. I have been able to use CN41 to get them the Purchase Requisition, Network, Activity, and Element, but cannot seem to find one for the Purchase Order.
I feel like this should be easy...
Any ideas?

Hi,
I would recommend you to test BAdI ME_PROCESS_PO_CUST.
Regards,
Edit

Transaction to see Networks/Orders and Activities in PS module ?

Similar Messages

Maybe you are looking for