Transaction : TRIP Error (IT0017)

Hello,
I have Maintain IT0017 for employee, but while running the Transaction code: TRIP, I am getting error "Infotype 0017 could not be read"
Plz suggest solution for this error ....
Sushilkumar.
Edited by: sushil7666kumar on Mar 2, 2012 2:12 PM

Thnks a ton.....
I have define number range for travel and also system is on EHP 5 and also below pacthes are updated as per note 1545686.
EA-HRCZA     605     0021     SAPK-60521INEAHRCZA     Sub component EA-HRCZA of EA-HR
EA-HRGXX     605     0021     SAPK-60521INEAHRGXX     Sub component EA-HRGXX of EA-HR
EA-HRRXX     605     0021     SAPK-60521INEAHRRXX     Sub component EA-HRRXX of EA-HR
But when i am approving travel request i am getting below error :
"Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)
Message no. FITP039"
Please advice for suitable solution.
Sushilkumar.
Edited by: sushil7666kumar on Mar 3, 2012 5:43 AM

Similar Messages

Error Initiating travel form in transaction TRIP

Hi
In transaction TRIP, after clicking change approved travel expense report, travel expense details are displayed. When I click on Results button, it is giving error message: Error while initiating travel form
Message no. 56568.
Can someone kindly help what is causing this error?
Thanks
Sriram

Hello Sriram,
No, only the 24th field in the Other Settlement you should change to 1, please see the F1 help for this field. Furthermore, please check the note 944221 if you want to use PDF form.
Regards,
Raynard

ECC 6.0 Problems with transaction TRIP

Hi all, we are working with ECC 6.0 and in the travel management when using the transaction TRIP we saved a travel, we got the error message
"1 PTRV_WEB_ADVANCES_INT , PTRV_UTIL_VSCH"
Following the sap note 871580 as we had enhanced the old structure PRTV_UTIL_VSCH, we now enhance the structure PTRV_WEB_ADVANCES_INT.
But we got the same message.
Can anybody help us?.
Thanks,
Alfonso

The problem was a duplicate data element in one enhancement strucutre

Balance in transaction currency error for AUC settlement

I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

I was trying to perform AUC settlement and hit Balance in transaction currency error. When i open up the line items I found that there are 2 sets (duplicate) of data posted to the depreciation area. The second set is with value 0 except depreciation area 01 posted as 100000EUR.
so now i have 2 line with 100000EUR for depreciation area 01. I guess this is the main culprit of generating the error Balance in transaction currency.
I'd glad if someone can tell me why they are 2 sets of data generated in line items? I only post the vendor invoice against the AUC once.
Or perhaps am I heading to the right way in identifying the root cause of this issue?
This is part of the AC010 course part of asset accounting that teaching on AUC aasets.
Any positive reply is welcomed!
I attached the line item image. Please note that there are some lines hidden for dep area beyond 03. and all are with amount 0.
[Line Item Image|http://www.bnl.com.my/photos/aucsettle.jpg]
Edited by: Kam Weng Leong on Dec 13, 2009 5:00 AM

Default values for service provider in transaction TRIP

Hello Gurus...
We are implementing travel management and I have a problem... here's the scenario
Tha gl account that should be used for a specific trip recepit depends on the following:
The expense type
The company specific type of trip
The Employee grouping for Travel Management
What we have done so far is :
create a service provider for every combination of trip_type/employee_grouping
create entries in V_T706B4 for every valid combination of expense_type/service_provider
configure transfer to accounting
With this configuration the gl account is determined correctly. However this way of solving the situation means that the user must enter the service provider for every recepit entered in the expense report. Given that in our particular scenario the service provider depends on data that has been already entered (type of trip) or that "the system should know" (employee grouping), users are not happy about having to enter the service provider.
¿Is there a way to assign default values to the service provider, and would it be possible to code/configure somewhere how to set those default values? I tried doing it through the trip schema, but apparently it is not possible to set a default service provider that way. I also tried setting the values in the user exit (b4 assigning trip number) but this doesn't work since the user exit is called after the standard validation. I also tried implementing subroutine USER_EVAL_RECEIPT, but this doesn't seem to work in transaction TRIP.
Thanks in advance for any help you may provide!
Juan Ramon

Hello AP.
Thogh your suggestion is helpful (I might use profile parameters somewhere else) thre is no parameter for the field I need. In any case It wouldn't have solved the issue completely, since the default value I need depends on both the employee(user) and the type of trip that's selected.

ECC Transaction iView Error on Browser Resize

Hello.
I have created hundreds of SAP ECC Transaction iViews in the portal. After doing some testing, I realized that any time a browser window is modified when an ECC transaction iView is within display, the resize causes the transaction iView to refresh. Upon refreshing, the transaction throws error or works as if the user submitted the transaction on the backend, instead of just remaining in the same state.
For instance, if you have an SAP Transaction iView to an ECC system for tcode QM01 and it is accessible through the Detailed Navigation, this iView can be opened either in its own browser window, or within the desktop inner page. If configured to pop-up in a new browser window and you click or drag to resize the browser window, the transaction refreshes, and throws the error: "Fill in all required entry fields." This is the same error that is thrown in ECC when a user submits the transaction with no data. Similarly, if you have the iView configured to open within the portal framework and you click on the transaction it opens in the desktop inner page. If you maximize/restore down the browser window displaying the portal, the transaction refreshes within the desktop inner page and throws this same error, like it was submitted.
It happens with every ECC transaction iView that I have created, but does not happen with SRM IAC iViews, Web DynPro iViews, or SUS functionality iViews. This leads me to believe it is a problem in ITS. Does anyone know what is going wrong, or how to fix this?
Thanks for any help!
Alexa

Hi,
Super admin has permission for end user for all the iViews. So he will be able to view the iView. As mentioned, please check if the end user permission is given for the end user to access the iView. Also check if the permission is given for that particular system. To check permissions, go to System Administration -> Permissions -> Portal permissions -> Portal Content. Check for iView and system that you have created.
Regards,
Harinin S

Get error from SQL AGENT: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024

I am running SQL Agent that executes an SSIS process from sql server1. The SSIS process executes its SQL/tables/sp’s against another sql server2.
I get an error after adding data flow tasks with transaction supported within a sequence with transaction required. The error, “The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction
manager has disabled its support for remote/network transactions"
Prior to adding this sequence everything was working from sql agent, and there were other sequences with oledb destinations.
Everything works when running within SSIS Package.
I see this article on similar issue,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0bfa2569-8849-4884-8f68-8edf98a9b4fe/problem-to-execute-a-package-and-tasks-with-a-certain-transactionoption-property-i-need-help?forum=sqlintegrationservices
“I had similar issue and solved by setting the following on both the machines. Allow Remote Clients, Allow Remote Administration,
Allow Inbound Clients, Allow Outbound Clients, and TIP are enabled in Component Services/My Computer/Properties/MSDTC/Security Configuration.”
I don’t want to remove transaction required for the “Remove Duplicates from Staging” sequence.
Anyone seen this?
Greg Hanson

DTC was running on remote computer. The problem was it was no longer accepting transactions from remote servers. This was in SSIS so I had to turn to "Transaction Supported" for all Data Flow Transactions.
Greg Hanson

Yum install Oracle-Validated Transaction Check Error:

Doing a yum install oracle-validated command with CentOS 5.3 and got these errors:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
file /etc/issue from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /etc/issue.net from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /etc/redhat-release from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /usr/share/eula/eula.en_US from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /usr/share/firstboot/modules/eula.py from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /usr/share/firstboot/modules/eula.pyc from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
file /usr/share/firstboot/modules/eula.pyo from install of enterprise-release-5-0.0.17.x86_64 conflicts with file from package centos-release-5-3.el5.centos.1.x86_64
Error Summary
Did the yum update work? Should I procede with the oracle install?
Thanks in advance

Hi Tom,
Could you please help me as im trying to install ORACLE OID 10.1.4.0.1 on OEL 5 n trying to use yum to load the default RMP
]# yum install oracle-validated
Loaded plugins: security
el5_oracle_addons | 951 B 00:00
primary.xml.gz | 1.6 kB 00:00
el5_oracle_addons 10/10
epel | 2.3 kB 00:00
primary.sqlite.bz2 | 2.0 MB 00:05
el5_ga_base | 1.1 kB 00:00
Setting up Install Process
Parsing package install arguments
No package oracle-validated available.
repo file :
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/0/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/1/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/2/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/3/base/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/addons/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=0
[el5_oracle_addons]
name=Enterprise Linux $releasever - $basearch - oracle_addons
baseurl=http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/$basearch/
gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-el5
gpgcheck=1
enabled=1
best regards,

J1IEX: Balance in Transaction Currency ERROR

All SAP Gurus,
While doing J1IEX: Balance in Transaction Currency ERROR occurs.
This happens only when figures are not even in case of capital goods credit.
Which SAP Note to be applied so that, system will accept odd figures too.
Regards,

Hi Rajan, Check the following threads :
Balance in transaction currency
Re: Balance in transaction currency Error

Balance in transaction currency error

Hi Friends,
In order to ressolve "Balance in transaction currency" error during J1IIN, we have applied oss notes 1018071 & 978186. However we are getting same promblem
Please help on this.

Hi shiv,
Kindly refer this threads,
Balance in transaction currency
Error : Balance in Transaction Currency
Error F5702 Balance in transaction currency VF01
Re: Balance in Transaction Currency
error in Balance in transaction currency
Balance in transaction currency
Thanks,
Swamy H P

Transaction Processor Error in View Pending Transactions

Dear All,
I am getting the Error: "Transaction Processor Error" in View Pending Transactions.
How can I identify due to what reason, this error had occured
because of this I am not able to close the inventory period for these transaction months..
and also I am having the following Error msg for another item in view Pending Transactions..,
How can I clear this ..?
Please update...
Many Thanks in advance....
Edited by: santark on Nov 10, 2009 6:46 PM

Hi,
This is not really and error. Oracle processes transaction in a batch. If one record will fail because of some error, other records/transaction in the batch fails with this error. For this error you really need to get the ERROR_EXPLANATION to find out the exact message as to why it is possibly failing. These can usually have their three flags reset and re-submitted as this error is usually attached to those records in a group where one of the records has been erred with one of the more severe errors.
I believe you can resubmit the transactions which are failed with the below script
Update mtl_material_transactions_temp
set      process_flag = ‘Y’,
     lock_flag = 'N',
     transaction_mode = 3,
error_code = NULL
Where organization_id = &org_id
Thanks,
Raghav

Transact RFC error

Hi Gurus,
I am getting one issue while loading the data thru infopackage.
While loading the data in 3.5 flow for some souce system it is taking long time
and givig me transact RFC error. I have checked the source system connectivity and it is fine.Although the status is yellow during the load but at the end of the load it turns to red and it gives me below mentioned error:
Missing data packages for No selection information arrived from the source s
Diagnosis
Data packets are missing from No selection information arrived from the source s. BI processing does not return any errors. The data transport from the source system to BI was probably incorrect.
Procedure
Check the tRFC overview in the source system.
You access this log using the wizard or following the menu path "Environment -> Transact. RFC -> Source System".
Error handling:
If the tRFC is incorrect, resolve the errors listed there.
Check that the source system is connected properly to BI. In particular, check the remote user authorizations in BI.
Kindly let me know your suggestion in this issue.
Thanks in advance.
Amit

Hi
This error would normally occur, if at the time of processing, the data packets get stuck
To check for stuck trfc follow the path
Environment -> Transact. RFC -> Source System
there, check if trfc recorded, then it means, it is stuck, slecect that particular record and press F6 to execute the LUW.
If this is not the case, check the job overview in the source system.
IF you find ARFCSTATE = loading/sysfail, it means the trfc is stuck ..
you can check the datapacket number from there, and try mannual update for those partiular data packets.
Or else, sometimes, the packet itself doesnt arrive in BW, because of connection problem during the processing of few packets, ands later when you check, it seems fine.
In such cases simply repeat the load
Hope this helps
Regards
Shilpa

Transaction Control Error

Hi,
i am getting "Transaction Control Error" in newly created Client while executing any tcode. can you please give the solution for this.
venkat

Hi,
i copied from 000 client to new client. it was successfully completed. After that if execute mm01 or mm02 transactions this type error i am getting. Can you please give the solution..
venkat

Transaction Demarcation Error

Hi,
I have written entity bean and tried to verify it in J2EE 1.4 SDK in Deploytool.
It's giving me one error about findByPromaryKey() and findBySalary() methods in SalaryHome interface and description of error is something like "...Transaction Demarcation Error...".
Any idea when it comes and how to resolve it?
Any help is appreciated.
Thanks
Rajeev.

These methods should have container-transaction attributes defined for them in the ejb deployment descriptor, ejb.xml.
<container-transaction>
<method>
<ejb-name>TestBeanEJB</ejb-name>
<method-intf>Home</method-intf>
<method-name>findByPrimaryKey</method-name>
<method-params>
<method-param>java.lang.Integer</method-param>
</method-params>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>

Transaction processor error in Misc. Transaction

Hi,
When i perform Misc transaction in Inventory module then system shows “Transaction processor error” at save Transaction.
can anyone guide about the error.
Regards,
Aman

HI Raghav,
Thanks for the note ids.
I have read all 3 metalink notes & solution written in note id: 412110.1 is applicable but that is for 11i and i am working in R12.0.4. It is some sort of bug.
i.e "the existing items can be fixed by unchecking and checking again the costing enabled flag and the inventory asset value flag."
But there is one problem with the solution that when i try to uncheck both flags system shows error:
"APP-INV-0557: You can't update this field when:
- On-hand quantities, pending & uncosted transactions exists"
Now there are onhand quantities exists for the item and i cannot uncheck or check the costing and asset value flag. Its working only for items with no onhand quantities as number of items are increasing and i can't clear on-hand quantities for every item.
Plz guide if i can avoid error and process misc. transactions without removing onhand quantities.
Regards,
Fahd

Transaction : TRIP Error (IT0017)

Similar Messages

Maybe you are looking for