Transaction type 230 not possible (no affiliated company specified) inABT1N
Dear Experts,
While I am posting transaction through ABT1N i am getting an error message
Transaction type 230 not possible (no affiliated company specified)
Message no. AA389
I checked in the transaction type 230 but here posting to affiliated co tick is their.Please advice at an earliest.
Regards,
Rahul
Hi,
Refer this thread Problum in ABT1N
Regards
GK
Similar Messages
-
Transaction type 180 not possible (no affiliated company specified)
Hi,
I am trying to do the down payment Request in F-47 with Purchase order and asset. When I am trying to do this by giving the Asset number and Purchase order with Item 10. I am getting this error Transaction type 180 not possible (no affiliated company specified). The vendor is also not linked to trading partner and not an affilated company specific.
Please help me solving this issue.
Regards,
RajHi Raj,
If in OBY6, no company ID is defined for company codes, they are NOT affiliated companies and the opposite.
Please check also via OBA7 (document type), if the field "Enter trading partner" is flagged
If yes -> you need to use a transaction type (AO74) which post to affiliatedcompany
If no -> you need to use a transaction type which does NOT post to affiliated
Best regards Bernhard -
Transaction type 100 not possible (no affiliated company specified)
Hi Experts,
At the time of posting asset acquisition in F-90 I am getting following error
Transaction type 100 not possible (no affiliated company specified)
Message no. AA389
I checked transaction type 100 config. there, "Post to affiliated company" is selected
Awaiting your valuable reply.
Regards
AnandHi,
check SAPNET note 127650.
Best regards -
Error: 'Transaction type not possible (no affiliated company specified)'
Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
PamelaHello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela -
ABT1N Intercompany Asset Transfer error: AA390 T type 230 not possible
Dear experts,
I am trying to post an intercompany asset transfer with trx code ABT1N but when simulating the error code
Transaction type 230 not possible (posting to affiliated company) appears. This is the explanation of the error:
Message no. AA390
Diagnosis
For the current document, you specified either implicitly (via the
customer/vendor), or explicitly (with a manual entry), that this posting
is to an affiliated company. In this case, Asset Accounting requires you
to use special transaction types. This enables the system to separately
identify such transactions.
I do not understand the error because TType is "Retirement to affiliated company with revenue" so should be correct.
Does anybody know what could be wrong?
CheersHi
Firstly, check out Note 209643.
Secondly, please read the long text of the error message again. The
transaction type must be set as "post to affiliated company". And
you must check back the followings :-
1. Please execcute function: SAP IMG -> FI -> asset accounting ->
transaction -> specify default transaction type.
You can find the default transaction type for "retirement from
inter-company transfer" and "acquisition from inter-company
transfer".
Then check in their definition whether they are relevant to
affiliated company.
If they are NOT RELEVANT to affiliated company, you can
substitute them with other transaction type Relevant to affiliated
company.
2. Please check the definition of transfer variant. In the transfer
variant, you have assigned the transaction type for both retirement
and acqusition for relation type 1. Both transaction types should be
set as "post to affiliated company" .
Please note that the abovementioned points must be checked because
the system logic will check the validity of the default value in
Point 1.
Then the transaction type in the point 2 will be used instead and
re-checked again.
Have you try to use 'No Reveune' in the specification for revenue?,
I think if it is afflicated companies, you are not allowed to use
revenue.
This error can also be produced because a wrong definition of the trans-
fer variants. Please have a look on note 327088 for further details.
Most of the issues on this matter were solved with this last Note.
Cheers, Blaz -
Transaction type ZGC not possible (posting to affiliated company) in ABSO
Hi all,
We have depreciation areas 01, 30, 31, 32 .
dep area 30, 31, 32 inherits the values from 01.
We want to post credit value to dep area 01 after doing the aqusition .
Hence we created a seperate transaction type ZGC ( in aqusitions- Tcode AO73) and limited it to dep areas 01, 30, 31, 32.
Transaction type ZGC is having credit and " do not post to affliated company " radio button is selected.
Now the issue is when we run ABSO to do a credit post in dep area 01 we are getting the below error .
Transaction type ZGC not possible (posting to affiliated company)
Message no. AA390
Diagnosis
For the current document, you specified either implicitly (via the customer/vendor), or explicitly (with a manual entry), that this posting is to an affiliated company. In this case, Asset Accounting requires you to use special transaction types. This enables the system to separately identify such transactions.
Procedure
Check the line items that you have already entered, and the transaction type you entered.
Not sure why it is asking for affliated company .
It will be great if any one help on this why we are getting this issue.Hi Daya,
Please try to choose Trans.Type 100 in AO73 transaction code and select the radio button Post to affiliated company under Posting type.
Thanks,
Kumar -
FBV1 error - Transaction Type 030 not possible
Hi SAP experts,
I am currently facing an issue while in FBV1 (via batch input)
It displays error message Transaction Type 030 not possible (posting to affiliated company), however, the asset group that it belongs to can only be Type 030 (Acquisition in group area only).
How can this be fixed?
Is there another TType that is similar to 030 ?
Any help is welcome
Regards
RogerHi,
check SAPNET note 127650.
Best regards -
New Write up transaction type which can post to Affiliated company
Hi Gurus,
Can you please help me with this request.
I have been asked to create the New Write up transaction type which can post to Affiliated companies copy of transaction type 700.
But i dont see any such option (Posting type) in transaction AO78.
Where as i can see the option in Transaction AO73( Acquisition) and AO68 (Retirement).
Can you please guide me how can i create this transaction type if i can and the reason if i cant.
Appreciate your time and early reply
RegardsOA81 is a general transaction. and AO78 specific for that kind of transaction types.
I think these field are hidden in AO78 for the reason that you can't use Affiliated company.
I never have seen a screen with Write up that you can fill in an Affiliated company.
For me this have only sense for postings between company code's.
You can tray to change the values by using the debugger, but it can give nice other effectslike that it is no longer possible to run the depreciation run when you have used this transaction type. Or it is working now but never again after an upgrade. There is a reason that you can't use these fields. -
Transaction type 100 not possible (posting to affiliated company)
Hi All SAP Guru's
I am trying to post asset acquisition through F-90
Asset Dr Transcation Type 100
To, Vendor Cr
while saving the above document i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
can anybody help, is there any alternative to go ahead
Regards
Sreenivasulu
Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PMHi,
When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
Have you tried this? (I've used this one. without chaging document type setting)
150 Acquisition from an affiliated company
Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
Check with IMG (T-code: AO73)
Heeseon. -
ABUMN Intracompnay asset transfer error AA389 Transaction type 300 not pos
Hello,
I am getting the following error message while runinng ABUMN Transaction type 300 not possible (no affiliated company specified) Message no. AA389. Transfer variant 4 (transfer within a company) code is set as follows
Rel Type Crs-sys.ar Rel.crsyst area trans me retmt tr type acq.trasn.typ
1 * generic entry 1 300 310
2 * generic entry 2 300 310
The problem is that on t-code AO76 trans type 300 Posting type has "Post to affiliated company" and "Post gross" both checked on. In Company Code Global Data my Company code and Company are the same.
Transaction type 306 has posting type "Do not post to affiiliated co." and "Post net" checked on.
I changed transfer variant 4 to have retmt transaction type of 306 for relationship type 1 and 2 instead of 300 and I do not get an error and the posted depriciation is updated correctly.
Since 300 is the recommended SAP setting in note 327088 would their be any problem if I leave it at 306?
Thanks for any answers to this issue.Hello Murali,
Thank you for your response.
I created a new tranaction type which was a copy of 300 and clicked on
Do not post to affiliated company
Post Net
Since 300 was set up for intercompany and it resolved my issue.
Rgds,
Dan -
F-02 with asset retirement: Trans. type not possible - No affil. company
Hello Gurus,
I am struggling with the following, I hope you can help me:
We want to sell an investment using a trading partner. When entering the asset retirement transaction type 230, I get error message AA 389 Trans. type not possible (No affiliated company specified). I however enter the trading partner through 'More data' but when coming back to the asset retirement, T. type 210 is written and changing it to 230 gives me the error.
I am using document type DR for which the flags 'enter trading partner' and 'Inter co. postings' are set. I tried without the flag 'Inter co. postings', no success.
I have tried with Trans. type 210 and changing the line item after simulation, no success as well.
The target document is:
Pos. Posting Key Account Amount Trading Part.
1 01 1195914 4,320.00
2 50 610720 4,320.00- CI09
After simulate:
Pos. Posting Key Account Amount Trading Part.
1 01 1195914 4,320.00
2 50 610720 4,000.00- CI09
3 50 204010 320.00- CI09
4 75 18678 0 0.01-
5 40 9740150 4,0000.00
6 50 9740100 3,9999.99-
Many Thanks in advance.
Alex-Hello Alex,
Try F-92, on the screen for creating the revenue line item, i.e. the credit side, you must activate the indicator "asset retirement." > Next, press 'Enter' key, after which the screen 'Create Asset Retirement' appears and in this dialog box screen enter the appropriate 'Transacion Type' instead.
Hope the above helps.
Kind regards,
John Chin -
AA390 Transaction type 345 not possibel to post to affiliate company
Hi,
We are getting this error AA390 transaction type 345 not possible to post to affiliate company , while settling an AuC to a fixed asset using trx AIAB.
Please advise how this can be resolved or any config steps are missing for TTypes 345 or 346.
Thanks,
ManoharHi,
Check in transaction type 345/346, Radio Button for Post to Affiliate Company is selected. In case its not, please select the radio button and then try again.This should work.
By default, Post not to affiliated company is selected.
Hope this helps.
Regards,
Harish -
Transaction type 100 not posible (posting to affiliated company)
Hil
While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
can you please give solution for this oneHi
pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
select transaction type 100--click on details--check posting type. if " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
regards
Vishwas
Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM -
Posting with trans.type 200 not possible
Dear Gurus,
when I try to scrap the asset, I am getting an error as below
Posting with trans.type 200 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 200 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Thanks in advance and RegardsTried all Transaction types.
Sometimes I get this error
Retirement of old assets data not possible (No existing old assets data)
Message no. AA416
Diagnosis
You have tried to post an retirement based on amount, using a transaction type which refers to old assets data (acquisitions from previous years).
However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
Procedure
Check the transaction type entered and the asset.
When I tried for other company code it is working
Compared the configurations of both the company codes. Everything is same.
We are using Group Assets. Group Asset is a required field in Tax Depreciation Area. I am giving that.
Is there anything else I need to check?
Please help.
Regards -
Posting with trans.type 300 not possible (No acquisition posted) Message
Dear Gurus,
When I execute the T-code ABUMN, i've got the following message:
Posting with trans.type 300 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 300 belongs to a transaction type group, which can only
be used to post to assets to which posting has already been performed.
However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used
for the first acquisition to an asset.
I don't know why I've got this problem. I did those tries:
Asset Accounting => transaction => inter-company asset transfers => define transfer variants => define transfer variant:
I don't know which transaction type to use? (Of course, if the problem can be solve here, i juste suppose it ).
And I tried also to use an other asset (they said that there isn't any acquisition in this asset so I tried with others, that has got acquisitions).
Thanks for replying,
With regards,
Gül'Thanks for helping,
But the problem occures again...
After transfert variant, I choose the variant 4 'transfert within a company code", then I enter 100 like you said it to me in the 2 cases:
- Transaction type in selling company code
- Transaction type for receiving company code
but i've got a new message:
Transfer variant 4 02 *: Method 1 retmt TTY not allowed
Message no. AC636
Diagnosis
Transfer method 1 is specified for depreciation area *. A retirement
transaction type must therefore be assigned.
Procedure
Assign a retirement transaction type.
Then I tried others tranfers methods but it doesn't work! And I tried others transaction type too (always the same error message)
Maybe you are looking for
-
Oracle 10g R2 installation with ASM+RAC
Gurus, Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option. We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate ORACLE
-
Not able to see approvers in grc ac 10.0
Hello gurus, I have configured workflows for access request for grc ac 10.0. When I submit a access request, my approver is not able to see any requests waiting for his approval. Also in the request status of the access request, no approvers are seen
-
Hi i did the steps for restor my locked ipad (whech not sync befor) but after a while it says connot restore pecause it's locked? what i can do please help?
-
Preview with light or shade editing function is not working (black or white picture)
Hello! I have a problem with the preview function in iphoto (version 9.4.2 on a white macbook, mid 2007, os x lion, latest version, 4 GB RAM, 500 GB HDD). Whenever I use the light or shade editing function, the picture in the preview is getting compl
-
CreativeCloudSet-Up install time error
Installer was unable to access a critical file directory. Please try installing again. (Error code: 41). how to solve