Transaction Upload using LSMW
HI,
We are using LSMW with IDocs for uploading transaction data into our CRM system.The IDoc type is CRMXIF_ORDER_SAVE_M02 and the message type is CRMXIF_ORDER_SAVE_M.
The IDoc is getting created successfully with status 53(Application document posted) but the transaction is not getting created in the system.
The port being used is of type 'FILE' and the partner profile being used is of type 'US'.
Can anyone please let us know if any further settings are to be made for the transaction to get created.
Thanks and regards,
Vijaya Sai.
Message was edited by:
Vijayasai Veerubhotla
Hi Vijay,
Hope you remember me.
The Idoc that gets created, does it have any other messages? The message 53 means that the Idoc processing has called the order framework and that the Idoc mapping was successful. So there are no errors in the loading of the document but the issue is with the order application itself. Ideally the Idoc will also contain messages which give information with regards to whether the orders application successfully processed the Idoc data or not.
Cheers
Binai
Similar Messages
-
Transaction MI10 UPLOAD using LSMW
Can i post document of transactrion MI10 using LSMW conversion. Which method i should prefer in LSMW. Kindly help me.
Hi,
There is an another thread with same requirement
MI10 - Conversion...
aRs -
Purchase order upload using LSMW
Hi
Can we use Basic type ORDERS05 in the IDOC method to upload purchase order using LSMW.
This also can achieved using business object BUS2012 and basic type PORDCR05.
Just wanted to what would be the difference between these two methods and possibliity of PO using basic type ORDERS05 using Idoc method.
Regards
Raj
Edited by: Rajitha1234 on Jan 28, 2011 6:55 AM
Edited by: Rajitha1234 on Jan 28, 2011 6:56 AMHai
Check with the following
Select fifth Radio button then follow the bellow step
<b>5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : ME21 and press Enter</b>
Thanks & regards
Sreenivasulu P -
hi,
LSMW it's only navigation part for direct/batch input method. So why do abapers do the LSMW to upload?
regards
raghuHi raghu,
good question...
If you are using LSMW to upload inventory, you need to understand that there must be an inventory tcode that must first be chekced to ensure all the fields are well captured. For example, if you are uploading Vendor Master record, you need check FK01 with the data given to you by the functional team and advise them if the data does not conform with what you have in the transaction fields.
Most times, the functional team are so oblivious of what exact data should be supplied. Please do not hesitate to ask questions. If you need further help on how to upload using LSWM, do not hesitate to let me know
thanks
karthik -
hi,
I have custom table(ie ztable). It has only only column material.
I have a local file containing only material numbers. I want to upload these material into my custom table using Direct Input method.
While doing this when i am selecting the first radio button of LSMW transaction i.e Maintain object attributes, there is one field with label object and method. when i am using f4 there i am not getting my custom table name??.Hi Praveen,
If you are planning to use LSMW to populate Z-tables, then we need to create a Direct Input program for this. You will have to maintain entries in Data Transfer tables for the F4 to work.
Also since it is just one table, you could write a simple program which will read the file and insert into the z-table.
Thanks..
Preetham S -
Initial inventory upload using LSMW,BDC
Dear Friends,
I am trying to upload data for Initial inventory capturing of valuation type for t.code MB1C using LSMW,BDC BECAUSE of valuation type it is not capturing
please guide me.I am using SAP Ecc 5 version.
Thanks in advance.
Rafeeq ahmedHi Sameer,
Have a look at these threads, they might help you
Chart of Accounts Upload
Problem: LSMW with transaction FS00 create account (BI is not generated)
Thanks
Janani
award points if helpful -
GL Balance upload using LSMW (BAPI bus6035)
Hello everyone,
We are uploading GL balances from legacy to SAP using the LSMW Bapi
object - bus6035
method - post
message type - ACC_DOCUMENT
Basic type - ACC_DOCUMENT03
When we run the lsmw, idoc is created, however with an error 51 saying
"Function module not allowed - APPL_IDOC_INPUT1'
The partner no. is the logical system (the system on which the lsmw is executed)
In the partner profile, we have defined this as LS. In the inbound parameters, we have defined message type = ACC_DOCUMENT, the process code is APL1 and the corresponding function module is - APPL_IDOC_INPUT1
Please let me know if we are missing something or doing anything wrong ?
Since the data in the LSMW will be read frmo a file on the presentation server, do we need to have a port configuration for the same ?
Thanks,
Sushil JoshiHi Sameer,
Have a look at these threads, they might help you
Chart of Accounts Upload
Problem: LSMW with transaction FS00 create account (BI is not generated)
Thanks
Janani
award points if helpful -
I am working on PO Upload. Initially I thought of going for LSMW but I come across various hurdles like different number of line items, updating different header texts and updating item header texts.
Please advice is it possible to do that in LSMW using recording or am I supposed to use LSMW using FM.
If you have an alternative please furnish with details.
-Mohan
Useful answer deserves POINT!!!!!>
Mohankumar Rajendran wrote:
> Useful answer deserves POINT!!!!!
Don't violate forum rules with such statements
SEARCH in SCN for this bapi BAPI_PO_CREATE1, you will get lot of posts. -
Hi
Iam uploading CA01 data using LSMW using the Standard Direct Input Method where my object-0170 & method-0002.
In the "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
the fields are added to the structures.
I maintained two flat files, one for Header Data and one for Item Data
There is a common field named 'key' in both the files
but only header data was written after reading
can any one give me the steps regarding this
Thanks in advanceYou defined 2 structures in step 'Maintain Source Structures' ?
-
Hi
Iam uploading FB01 data using LSMW.
I maintained two files, one for Header Data and one for Item Data
but only header data was written after reading
can any one give me the steps regarding this
Thanka in advance
venkatHi,
LSMW will have a Indocator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Regards
Sudheer -
Hi All,
We have a requirement to upload IBAN details of vendors using FK02 using LSMW. Also the vendors which does not have bank details we need to add them.
Can you let me know how to achieve this?
-- Syed Abid HussainDude,
Remember if IBAN is entered with out bank account number then where ever bank account is blank with the same bank key system will update same IBAN every where...
Do the following steps;
First; Maintain Bank accout number for all those vendor where it is missing once it is done then do the step two..
Two; Update IBAN using t.code FIBAN (Table TIBAN) instead of loading thru FK02 as IBAN has no reletion with vendor number instead with Bank account number (Although you can update IBAN from FK02 its up to you) but FIBAN is easy and it is a matter of copy / paste only with the right bank account number and bank keys etc etc.....
I would strongly recommend you to make the Bank account field mandatory in vendor master data to avoid any Discrepancy in future as stated above......
Cheers,
Guest -
Infotype mass upload using LSMW
Hi Experts,
I want to update HR info types using LSMW in mass.
Infotypes needs to be selected dynamically depending upon action type and action reason.
Can any one pls guide me which method to use in LSMW.
With regards,
Chandrasekhar.CAlthough you wish LSMW works thats way..it doesnt. As you know LSMW is nothing but a mere a recording, you will have to have 1 recording each for each action type.
you practically have to perform that each action once, record it and then use it to upload data for that action type.
so record separately every action for which you want. and coming to infotypes, dynamically picking is nothing but configuring you Infogroup (V_T588D) for that specific action. This anyway you have to configure to run actions from pa40.
so when you are performing LSMW recording of PA40 , and select you action, the infogroup will run you through all the infotypes configured in that infogroup of that action.
i hope it answers ur query..else revert back. -
Profit Center upload using LSMW
Hello,
I have created a LSMW project for profit center upload using the BAPI methodology, BUS0015(Profit center)/CREATE(method)
PROFITCENTER_CREATE(message type)
PROFITCENTER_CREATE01(basic type)
The Idoc inbound seeting are set as follows :
File port DX_PORT_00
Partn.Type US
Partner no. LSMW_PAR00
Message Type PROFITCENTER_CREATE
Process code BAPI
When I run the data file in, the Idocs are created successfully in status 53, but I do not see the actual profit center when I go to KE53. We are on ECC 5.0
Thanks in advance.Dear all,
We are on ECC 6.0 and trying using the same configuration for loading profit center.
Unfortunately, we received error message in the step of IDoc generation and we found that the message type and basic type got truncated as 'PROFIT' and 'PROFITCE' respectively. But we could still see the correct info at the step of 'Display converted data' which is a step just before generation.
Have you guys had the same problem previously? Do you know what went wrong?
Cheers,
Ivan -
Material Classification Upload using LSMW
Hi SAP Experts,
We are thinking of using LSMW as a means to upload our material master data for the classification view. How is this done?
Can we use LSMW to upload materials with many class assignments with multiple characteristics?
Ex. Material A is assigned to class X and class Y. Class X has characteristics 1, 2, and 3. Class Y has characteristics 4, 5, and 6.
Would appreciate a swift response.
Thanks in advance!Hi All,
If it is the existing material you need to modify the Classification type. It can be done by BDC. If you instruct the ABAP team they will make it & give. I am not sure about modifying classification type using LSMW. If you need to create a new material master data with classification using LSMW i will give the steps.
Check out this link for LSMW Steps:
www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Reward if useful.
pherasath -
HI all,
Is it possible to upload excel file using LSMW method?
If it is? Plz tell me the process ASAP.
Thanks & regards,
SriniHi,
It's no possible to upload directly Excel file in LSMW.
You must transform to an flat File.
There are 6 delimiters
- No Separator
- Tabulator
- Semi-Colon
- Comma
- Blanks
- Others
Rgds
Maybe you are looking for
-
I still can't reset my i phone
So why I can't reset my iphone is there a way for it please
-
Where can I find documentation for class HttpJspBase?
Is it part of package javax.servlet.jsp?
-
Please Help.SAP BOBJ Requirement-WEBI
Hi Users, I have a requirement from my client. Current situation is that we have data load happening from flat files to R/3 Tables and then we Universe as SEMANTIC layer on these tables on which we have build WEBI reports. Now Client wants to build I
-
Can't sign in - Error code 80710b36
I'm on ps3. Glad I haven't got a PS4, paying for PSN and not being able to play on the weekend.
-
Hye Everybody.. I am looking for some body help for GOOD FUTURE IN ORACLE .i have 6+ exp in Oralce Forms and Reports.Now i want to upgrade my skills.So which is the BEST track/Way for me In ORACLE.Bcos i confused.What to do..SO please help me to buil