Transaction Variant do not commit skip first screen

When I am calling to transaction variant its open
bu not commit the skip first screen .
Does someone know how can i fix it ?

Hi Kobi ,
as per my knowledge , there is no such command in SAP to skip first screen for transaction variants.Transaction variant is nothing but a transaction with some modifications.
but what u are talking abt is calling transaction , so this u have to call like this --->
<b>
call transaction 'MM03' and skip first screen.
</b>
Regards
Prabhu

Similar Messages

Call transaction CJIC using bdcdata and skip first screen

I want to call transaction CJIC and skip first screen. I have set parameters for fields for which I need to pass data. But one field namely display variant has no parameter id. How can I pass value to it and also skip first screen?
I have tried passing its value in bdcdata and also passing ONLI. But it does not run in mode "N". What can be the solution?

Hi frnd,
fortunately transaction CJIC is selection-screen of an executable program RKPEP012.......so u don hav to use call transaction and instead u can use SUBMIT statement................
submit RKPEP012 WITH SELECTION-TABLE rspar
Effect
If you specify this addition, parameters and selection criteria on the selection screen are supplied from an internal table rspar. You must specify an internal table with the row type RSPARAMS for rspar. The structured data type RSPARAMS is defined in the ABAP Dictionary and has the following components, all of which are data type CHAR:
SELNAME (length 8),
KIND (length 1),
SIGN (length 1),
OPTION (length 2),
LOW (length 45),
HIGH (length 45).
To supply parameters and selection criteria for the selection screen with specific values, the lines in the internal table rspar must contain the following values:
SELNAME must contain the name of a parameter or selection criterion for the selection screen in block capitals
KIND must contain the type of selection screen component (P for parameters, S for selection criteria)
SIGN, OPTION, LOW, and HIGH must contain the values specified for the selection table columns that have the same names as the selection criteria; in the case of parameters, the value must be specified in LOW and all other components are ignored.
If the name of a selection criterion is repeated in rspar, this defines a selection table containing several lines and passes it on to the selection criterion. If parameter names occur several times, the last value is passed on to the parameter.
The contents of the parameters or selection tables for the current program can be entered in the table by the function module RS_REFRESH_FROM_SELECTOPTIONS.
Notes
In contrast to selection tables, the data types of the components LOW and HIGH in table rspar are always of type CHAR and are converted to the type of the parameter or selection criterion during transfer, if necessary.
When entering values, you must ensure that these are entered in the internal format of the ABAP values, and not in the output format of the screen display.
Revert back for queries.
Cheers,
Will.

Call transaction VA01 or VA03 and skip first screen using Web dynpro

Hello Experts,
I am calling the standard transactions using Web dynpro via ITS.
I am able to reach to the initial screen of the standard transactions say VA03 and populate the sales order number through Web dynpro.
My requirement is to skip the first screen of the transaction.
I tried passing the screen number in the URL link but still it is showing the initial screen.
Please suggest me solution for this.
Thanks and Regards,
Rahul Sinha

Hello Rahul,
Did you follow the ITS Wiki article?
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=22375
Edgar

Problems with SKIP FIRST Screen when calling a transaction variant

Hi,
I have a transaction variant of VA02 that suppresses the display of the pricing button on the conditions screen. I have created a variant transaction for called ZA02 which calls this variant of VA02.
In my program I have coded the following :-
      SET PARAMETER ID 'AUN' FIELD VBELN.
      SET PARAMETER ID 'VPO' FIELD POSNR.
      CALL TRANSACTION 'ZA02' AND SKIP FIRST SCREEN.
I would have expected the program to display the second screen of VA02 but it displays the first screen and when I hit return key the second screen is then displayed.
I don't think I need VPO setting but when I code
      SET PARAMETER ID 'AUN' FIELD VBELN.
      SET PARAMETER ID 'VPO' FIELD POSNR.
      CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
VA02's second screen is displayed
Any help as to how to Skip this first screen with ZA02 would be greatly appreciated
Thanks
Rous

Yes you are right Reg thanks for that.
But it appears that VA02 doesn't require it setting anyway. I changed the PID to APO and indeed I've even commented the line out, but my program goes to the second screen when calling VA02 but stays on the first screen when calling ZA02 .

Call Transaction Skip First Screen does not work

I want to use 'Call Transaction' to execute the transaction /sapapo/scc_tl1 in Change Mode. I want to skip the first screen. I have added 'and skip first screen' to the CALL TRANSACTION but it still stops on the first screen. The first screen has three buttons: Display, Change and Create. The function key assigned to Change is F6. What is the code to select the F6 key so the first screen can be bypassed.
Thanks and best regards,
Sandy

THE ONLY THINK U HAVE TO DO IS RECORD THE TRANSACTION FOR
CHANGE MODE. AND FILL INTERNAL TABLE OF TYPE BDCDATA AND CALL TRANSACTION.
EXAMPLE: I CALLED SE93 IN CHANGE MODE. COPY AND RUN THE FOLLOWING PROGRAM, U CAN UNDERSTAND WHAT IAM TELLING.
REPORT ZTESTH messAGE-ID ZV.
DATA: IBDCTAB TYPE TABLE OF BDCDATA WITH HEADER LINE.
IBDCTAB-PROGRAM = 'SAPLSEUK'.
IBDCTAB-DYNPRO = '390'.
IBDCTAB-DYNBEGIN = 'X'.
IBDCTAB-FNAM = 'BDC_OKCODE'.
IBDCTAB-FVAL = '=CHNG'.
APPEND IBDCTAB.
IBDCTAB-PROGRAM = 'SAPLSETX'.
IBDCTAB-DYNPRO = '0120'.
IBDCTAB-DYNBEGIN = 'X'.
IBDCTAB-FNAM = 'BDC_OKCODE'.
IBDCTAB-FVAL = '=NEXT'.
APPEND IBDCTAB.
CALL TRANSACTION 'SE93' USING IBDCTAB.

CALL TRANSACTION AND SKIP FIRST SCREEN to specified tab in TCODE 'IW32'

Hi,
I am using CALL TRANSACTION AND SKIP FIRST SCREEN in ALV Grid Report to call IW32 tcode and it goes to tcode skipping the first screen. But it goes to the default header tab in the tab control. Whereas I wish to go to the specified tab 'OPERATIONS'.
Can any one help me, as to how to resolve this issue ?
Thanks in advance.

Sridher,
I have the similar requirement. but in my case its COSTS tab. Could you please provide the code you have used for this to work?
I used standard "call transaction with mode 'E' ". This seems to be working but I am not pleased by my effort. Is there any proper way that you might have followed ?
Greatly appreciated your help.
Regards,
Reddy

Call Transaction and skip first screen in SE37

Hi All,
I want call transaction SE37 and skip first screen of it. Is it possible through the statemen Call transaction 'SE37' and skip first screen ?.
Of course I have populated the parameter id 'LIB' before this statement but it is not working. Though I have found several posts with this solution but it's not working for me. Could anyone please let me know if this can be done using this statement or there are any other additions required along with this statement or it is not at all possible to achieve this functionality.
Thanks in advance !!.

Solved! without a solution? very funny.
In somewhere of second screen related bdcdata, intensionlly make a mistake to force the system throws the error and the call the trasnaction with mode 'E'. This will solve the issue.
perform bdc_field using 'BDC_CURSO' " I removed letter R in 'BDC_CURSO'
'ISEG-ERFMG(01)'.
CALL TRANSACTION 'XXXX' USING BDCDATA MODE 'E'.
Thanks.
Suresh Yerra.

How to skip first screen that is not selection screen.

Hi Experts
I am working on a module pool program where in I am required to call a transaction with skip first screen. the first screen of this transaction is self made screen with screen painter with input boxes and a submit button with an OK_CODE. now I am able to get all the input boxes filled during the call, however as the ok_code is missing it is not skipping first screen, neither does the PAI of first screen of called transaction is getting fired, is there any way to fire it?

I discovered that once I set the parameter of sy-ucomm and then called the transaction it worked. check the code if you need the help on same
ACTION = 'VW'.
value = 'V01'.
SET PARAMETER ID 'SPM' FIELD SPMON.
SET PARAMETER ID 'VRS' FIELD VRSIO.
SET PARAMETER ID 'VKB' FIELD WA_INDEX-L_VKBUR.
SET PARAMETER ID 'DFM' FIELD ZSDTPLANVRSIO-DAT_FRM.
SET PARAMETER ID 'DFT' FIELD ZSDTPLANVRSIO-DAT_TO.
set PARAMETER ID 'ACT' field action.
set PARAMETER ID 'OKC' field value.
call TRANSACTION 'ZPLAN_INT' AND SKIP FIRST SCREEN.{/code}
this OKC parameter id holds the value for sy-ucomm and the screen 100 of the called transaction has been skiped and ALV was displayed direct away.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZAO_MAIN'.
SET TITLEBAR 'ZAO'.
if pass <> 1.
get PARAMETER ID 'ACT' FIELD action.
get PARAMETER ID 'SPM' FIELD SPMON.
get PARAMETER ID 'VRS' FIELD VRSIO.
get PARAMETER ID 'VKB' FIELD knvv-VKBUR.
get PARAMETER ID 'DFM' FIELD ZSDTPLANVRSIO-DAT_FRM.
get PARAMETER ID 'DFT' FIELD ZSDTPLANVRSIO-DAT_TO.
get PARAMETER ID 'OKC' field sy-ucomm.
set PARAMETER ID 'ACT' field action.
endif. {/code}

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .

Hi all,
i hope there is someone that can help me.
My problem is: in an ABAP custom report in a FORM user-command my code is
CASE ls_selfield-sel_tab_field.
    WHEN 'ITAB-BELNR'.
      IF NOT ls_selfield-value IS INITIAL.
        SET PARAMETER ID 'RBN' FIELD ls_selfield-value.
        CALL TRANSACTION 'MIR6' AND SKIP FIRST SCREEN .
ENDCASE.
When i click on output field of my report, not skip first screen but only call MIR6!!!
How can i solve this problem?
Regards.

Hi,
First of all Please don't use all Caps for Subject Line
Test Following Sample Code it will solve out your problem,
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      belnr(10).
belnr = '100'. " Give Document Number here
DATA opt TYPE ctu_params.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMM08N'.
wa_it_bdcdata-dynpro   = '100'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'SO_BELNR-LOW'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'SO_BELNR-LOW'.
wa_it_bdcdata-fval = BELNR.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = '=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'E'.
CALL TRANSACTION 'MIR6' USING it_bdcdata OPTIONS FROM opt.
Please Reply if any Issue,
Best Regards,
Faisal

Call transaction 'LS33' and skip first screen.

This doesn't work:
set parameter id 'LEN' field '04018091'.
call transaction 'LS33' and skip first screen.
I've found this:
<a href="https://www.sdn.sap.com/irj/sdn/message?messageID=3715690">https://www.sdn.sap.com/irj/sdn/message?messageID=3715690</a>
but I'm not sure about the exact meaning (wouldn't know where to put the *)
nor even about if it applies.
Thanks in advance.

Sorry, I mistook this forum for that of ABAP General.
Anyway, the answer is in
Call transaction 'LS33' and skip first screen.

Call transaction skip first screen and fill a field

Hi,
I have got a requirement where need to call transaction VA01 by filling the fields on the first screen like order type, sales area using set parameter IDs and need to skip first screen. There is additional requirement apart from this where I need to fill the field 'Proforma' with some value 'X' in the header 'Additional data A' while calling transaction VA01.
Is there any shortway to do this without using BDCdata?
Thanks
SD

Hi,
I had this kind of requirement earlier. But in my case I need to pre populate several values and then show the screen for user input. Here is my suggestion for you. Follow below code for filling BDC DATA internal table and call transaction in "E" error mode. This should show the screen finally for user input. In this code find for "?" and replace it with your field name and field value. Remember to check validity of screen # and names with you system.
Thanks,
Amara.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code. Do not use code tags to format text
Edited by: Rob Burbank on Dec 22, 2010 6:08 PM

Skip first screen of BD87 using call transaction with BDC_DATA option

hello all,
i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
regards.

Hi
Build a BDCDATA with following code..
                                                      T     BD87
RBDMON00     1100     X
BDC_CURSOR     SX_DOCNU-LOW
                                                            BDC_OKCODE     =CRET
                                                            SX_DOCNU-LOW
SX_CRETI-LOW     00:00:00
                                                            SX_CRETI-HIGH     00:00:00
                                                            SX_UPDDA-LOW     05.02.2010
                                                            SX_UPDDA-HIGH     05.02.2010
                                                            SX_UPDTI-LOW     00:00:00
                                                            SX_UPDTI-HIGH     00:00:00
RBDMON00     0100     X
BDC_OKCODE     =BACK
RBDMON00     1100     X
BDC_OKCODE     /ECBAC
                                                            BDC_CURSOR     SX_DOCNU-LOW

Call transaction and skip first screen

Hi,
I have a little but I think difficult problem
I have a selection screen and after that I call my dnypro. In this dynpro I can open a dynpro which looks like a popup where I have the possibility to call the same transaction with other input paramters.
the problem is when I make call transaction and want to go back I see the pop up dynpro which calls the transaction. so how can I close this popup dynpro by calling again transaction?

I think I can't eyplain it.
Following. I have:
call transaction trans: selection screen calls dynpro 100, in dynpro 100 button with dynpro 200 with starting parameters.
dynpro 200 calls again transaction trans with skip first screen.
now I have displayed again dynpro 100 with new values. When I now want to go back I can see dynpro 200 which called the transaction. So how can I achieve this that dynpro 200 isn't shown when I go back ?

Call Transaction and skip first screen on workflow task

Hello, I'm developing a workflow with a user decison step, where the user should fill some data in transaction FD02.
When the user presses the button in the workitem, the wf goes to a step where i should call transaction FD02.
I'm using SET PARAMETER ID: 'KUN' FIELD customer. to fill the customer field and CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.
But when I press the button in the workitem nothing happens. I tested the same in a report and it works. Can anybody help me?
Thanks a lot.

Hi,
try below code
data: fcode type FCODE value 'ANTRAGAEN',
       customer type kunner,
       bukrs type bukrs.
SET PARAMETER ID 'KUN' FIELD customer. " to fill the customer field
SET PARAMETER ID 'BUK' FIELD companycoder. " to fill the company code
SET PARAMETER ID 'TTC' FIELD fcoder.       " to fill Function code for enter " it may be other than TTC please check.
CALL TRANSACTION 'FD02' AND SKIP FIRST SCREEN.

Transaction Variant do not commit skip first screen

Similar Messages

Maybe you are looking for