Transaction variant for CA02

Dear Gurus,
We will be maintaining two group counters under one group of routing.  Now, two different users will be accessing CA02.  The 2nd user shall be restricted to edit one group counter only.  With this, I need to create Transaction variant for this user wherein the 1st counter can be edited while the second counter must be in display mode.  Kindly give inputs how i do this.
Thanks.
Regards,
Ching

Ching,
Are these group counters for the same plant? If so no standard option available.
Regards,
Prasobh

Similar Messages

  • How to create Transaction Variant for T code F-30

    Hi
    I want to create a Transaction variant for T code F-30, so that user can't change the currency field and put any value in rate. Currency should be always in USD.
    Any input will be heighly appriciated.
    Regards
    Shiv

    Hi,
    In that case you can use transaction SHD0 to create a transaction variant for F-30 with its screen variant for screen# 122. And you also want to creat a so called Variant Transaction Z-something for F-30 using the mentioned transaction variant. You restrict users to use that Z-something. For other unrestricted process, the system will still cal F-30. Here is the documentation:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/67/232037ebf1cc09e10000009b38f889/content.htm
    Regards

  • Problem in SHD0 about creation of Transaction Variant for VA02

    Hi All,
    My goal is to create a Transaction Variant for VA02 Variant that doesn't display the "Object Status" button under the page "Status" in the Header of Sales Orders.
    To do so, I created a Transaction Variant in SHD0 (named ZTEST_VA02), the creation process creates the Screen Variants too, and i named them ZTEST_VA02_<dynpro_number>.
    The Dynpro where I can found the button to hide is the SAPMV45A / 4305, so the Screen Variant Name is ZTEST_VA02_4305.
    My problem is that If I test the single Screen Variant (ZTEST_VA02_4305) using the button in SHD0, I can see the whole transaction with my modify (the "Object Status" button is hidden), but testing the entire Transaction Variant ZTEST_VA02 I cannot see the modify and the Button is pretty visible.
    I even tried to create a Transaction with Variant, in SE93, that launches the transaction VA02 with the variant ZTEST_VA02, and I tried to assign the Transaction Variant I created as a Standard Variant, in both cases the problem is that the modify doesn't appear to be applied.
    For me this is a real mistery because If the Screen Variant is right (It works) I would expect to see that even the Transaction Variant is correct.
    Does Anyone have (or have ever had) this problem?
    Thank You very much for your attention.
    Regards,
    Claudio
    PS: I forgot to mention that I'm working on SAP ECC 6.0
    Edited by: Claudio Distrutti on Apr 4, 2008 11:47 AM

    I too facing the similar problem when assigning the screen variant to transaction variant.
    screen number where the 'Obj.Status' button is ' 4456
    if executing the screen variant alone , it works  perfectly,
    once i assing to the transaction variant and test,  the 'Obj.Status' button is visible.
    does anyone got the solution?
    Edited by: Thomas Paul jr on Oct 21, 2010 1:59 PM

  • Transaction Variant for a standard report without transaction code

    Hi,
    I want to create a transaction variant for a executable report. The report has some subscreens 100, 110 etc. I want to hide the subscreen through transaction variant. So I have created a transaction code (Y*) for it and then tried creating transaction variant using SHD0 transaction.  But the fields are not listed to choose invisible or other options. Please advice

    The fields are listed when you leave each recorded screen. You have the flag "do not display the screen". It's strange you don't have anything, are you sure you started the recording? (you enter the transaction code, the transaction variant, you click the Create button and the screens are displayed and recorded)
    Which transaction is it?
    A little remark (about your last posts): forum rules ask people to give points, it's a way to say thank you. Otherwise, people won't help you anymore. It's not a black and white logic : don't give points only when your problem is solved. Give 2 or 5 points to thank people (or 0 if it's out of context). Thanks.

  • Transaction variant for VA02 is not working for few fields

    Hi All,
    I have created a transaction variant for VA02. Made the necessary code changes for populating the variant name in MV45AFZZ. It is working fine for all the screens and all the fields except for second screen of VA02.
    First screen - Enter sales order number.
    Second screen - Overview screen.
    In second screen, I have disabled all the screen fields. When I run the variant, all fields are disabled except sold-to party, ship-to party and create sold to party ICON. All these fields belongs to screen 4701.
    In the transaction variant I can see that these fields screen attributes set to output only. I don't see anything different for these fields compared to other fields.
    First I thought it is because of mandatory fields. But some other mandatory fields are disabled after my changes. Why is this happening only for these 3 fields (Only for screen 4701 I can say).
    Surprisingly, if I do any action like enter/select other tab, these fields are getting disabled.
    Your inputs on this are highly appriciated.
    Thanks,
    Vinod.
    Edited by: Vinod Kumar Vemuru on Dec 31, 2009 10:01 AM

    Thanks, happy to see the reply.
    But I have given the correct names as suggested by you.
    I have also created a Transaction ZVA02 as i dont want this variant to be applied on standard VA02.
    It is working on first screen but not on subsequent screens. Am i missing something, some link or activation?
    Transaction Code VA02                  Change Sales Order
    Transaction Variant  ZTRN_VA02                       testing
    ZTRN_VA02_0102                                        SAPMV45A     102
    ZTRN_VA02_4001                                        SAPMV45A     4001
    ZTRN_VA02_4021                                        SAPMV45A     4021
    ZTRN_VA02_4050                                        SAPMV45A     4050
    ZTRN_VA02_4401                                        SAPMV45A     4401
    ZTRN_VA02_4701                                        SAPMV45A     4701
    ZTRN_VA02_4900                                        SAPMV45A     4900
    when I run this the first screen is applied correctly but what happens next.

  • Transaction Variant for T. Code - FBL1N

    Hi,
    I want to create a Transaction Variant for T. Code - FBL1N.
    Actually, My requirement is that I want to give a Dynamic Selection "Reconciliation acct-XXXXXX"... After Create  the variant for this, i want to disable the Dynamic Selections Icon. I want both things at a time..
    Please tell...
    Regards....

    Hi,
    Even though question is already marked as answered, I think that Pince Kummar requirement was not fulfilled.
    Those are the steps that you should execute:
    1. Create a Selection Variant:
    In FBL1N transaction, enter your required field values, and click on the save icon. Maintain variant attributes as you need. Assign to your selection variant a name beginning with CUS&. With that prefix you specify that is a customer system variant.
    2. Assign the created selection variant as default for tcode FBL1N.
    Go to SE93 and change FBL1N, on "Start with variant" field select your created CUS& variant and save.
    At this time you can notice that FBL1N transaction always begin with your selection variant.
    3. If you also want to disable Dynamic selections function, you should create a Standard transaction variant.
    Go to SHD0, enter the transaction code name (FBL1N). In the Standard Variants tab enter a name and choose create function. Automatically FBL1N selection image will be showed, click back button to return. In the screen that now is showed, choose "Menu Functions" and enter Program "RSSYSTDB" and gui status "%_00" and click Menu Functions, then in the tree that come out, find and select Dyamic Selections function (%_00->Edit->DYNS), next click disable button and then continue button.
    Now you return to Transaction variants maintenance screen. Make sure that in deactive functions list, for Dynamic selections function is only active "For Transaction" check box. Now save and activate your transaction variant.

  • Transaction Variant for a Custom Report

    Hi Folks...
    I am trying to create a transaction variant for a custom report...and i am unable to do it. Have any one tried that before and got it worked..please let me know.
    Thanks in advance.
    Rajeev

    hi,
    i also used a different approach based on the requirement.  this might be helpful to someone:
    requirement: to make one of the parameter fields as display only.  other users should not be allowed to edit this field & make it modifiable again.
    _solution1:_ in the program, assign the parameter field to a modification id and make it protected (screen-input=0). 
    limitation: needs program modification incase there is a future requirement to change the parameter field value.
    solution2: [1]create & save a variant and protect that parameter field. [2] go to SE93 & create a report transaction, put your saved variant in the 'start with variant'. [3] go to SU21 & create an authorization object for controlling the access to the variant. [4] ask your basis to attach this authorization object to the user id responsible for maintaining the variants for that program. [5] add a logic to check the authorization object in your program whenever the user tries to save or delete variants.
    remarks: in production, make sure the authorization object & the update profile are transported.  create also the same variant name as what you have defined in your report transaction code.

  • Transaction Variant for tcode SP01

    Hi All,
    I am trying to create the transaction variant for the tcode SP01 by using tcode SHD0.
    Steps I followed are:-
    1. Create tcode ZSP01
    2. In SHD0, tcode as ZSP01 and hit the Create
    3. Control goes to Screen SP01 inital selection screen
    I need to change 'created by' as display only and cannot get the screen attributes.
    Any help will be greatly appreciated.
    Regards,
    Azhar

    Thanks for the quick reply.
    I found that SP01 is a module pool program with screen 2000 then I should be able to create the transaction variant.
    I tried creating the tcode with your suggested authorization object getting warning message 'Check object has been maintained(Press enter to reset)'  and when I press enter the auth object field will get reset.
    Thanks for your quick response and suggestions.

  • Transaction variant for RPCPCC00

    I need to create a transaction variant for the program RPCPCC00 and default the company code value so that a given person can run the report only for the given default value. I'm not able to set a default. Can anybody help me in this? Thanks in advance.

    Use the transaction SHD0- To create a transaction variant for the desired Transaction. For your case plug in the t-code for the report that you want to create the variant for.
    See if the link helps.
    http://www.mortenhjorthnielsen.dk/Security/transactionvariants.htm

  • Transaction Variant for XD02

    Hi All,
    I have been exploring how to create/use a transaction variant for transaction code XD02. I have already done the first part of my requirement, which is to disable the screen fields of other General Data of XD02. Now, can I limit the access of the transaction variant to a specific customer account group?
    Thanks in advance for your suggestions.
    Regards,
    Ranilo

    Hi,
    If you have done the Transaction variant for a particular transaction which means its global(For all account groups). So to meet requirement search any  user eixt or badi is avaialble..........
    Regards
    Ramakrishna Pathi

  • Transaction variant for vf02

    Hi Ajali here. I created a transaction variant for VF02. Using this tx varinat I have disabled several fields in the first screen of VF02.However when I hit a back from the screen 2 of this transaction variant it takes me to the initial screen of the STANDARD SAP TRANSACTION. Can anyone plz tell me whether I can sequence the screen variants present in the transaction variant.

    In SHD0...
    While creating transaction varinat dont click on Exit& save button instead of click on Ok(tickmark) button until your req.finished.
    Thanks
    eswar

  • Transaction Variant for particular users

    Hi all,
        I have to hide Qty field in ME22. i created a transaction variant for this.
        But i want that to be activated only for specific users.
       I created a variant group and assigned users to that group.
    But that is not working. the variant is getting activated for all users.I dont know which part  i  missed.
    Help me in this regard.
    Regards,
    Viswanath babu

    Hi  Viswanath,
    Have you followed the naming convetion -
    Check the doumentation in SHD0 ( Utilities -> Application Help ).
    <b>How are the variant groups maintained?
    You can enter the group names on the "Variant Group" tab and maintain variant groups with the "Create" or "Change" functions.
    The group name must be in the "correct" namespace.
    In addition, there are two Where-Used Lists:
    Which users are assigned to the group,
    For which transactions the group applies.
    Which transaction variants belong to the groups?
    The name of a transaction variant that is to belong to a group meets the following naming conventions:
    <Name of variant group><name of transaction code>. Example: A transaction variant is to be created for the XYZ transaction that belongs to GROUP1. The name of the transaction variant is then GROUP1XYZ.
    Due to this naming convention, the group name must be in the "correct" namespace.
    Transaction variants that (randomly) meet this naming convention do not necessarily belong to a group. The group assignment is activated by
    1. Creating a group
    2. Assigning users to this group
    A transaction variant that belongs to a group can also be used this way, like a transaction variant without a group.
    How are the transaction variants that belong to a group maintained?
    Transaction variants that belong to a group are maintained in the same way as all other transaction variants, they are distinguished using a naming convention (<name of variant group> <name of transaction codes>).</b>Cheers

  • Transaction Variant for Transaction FV60 (Parked AP Invoice)

    Hi All:
    I have been successful in creating a transaction variant for transaction code FV60 (Park AP Invoice). My objective was to get rid of the post and save as completed buttons on the FV60 screen. But when I simulate the document, the post and save as completed buttons appear again and I have been unsuccessful in getting rid of these and deactivating/hiding them.
    Can anyone please help me or has anyone done this before?
    you help is very appreciated
    thanks
    Brian

    Hi you can hide the button as follows;
    While doing SHDO Variant Creation , in the confirm screen entries dialog press Menu Functions button and in the dialog expand Function setting tree and select BU (POST) and press Deactivate button (or F2 key) then select PBBP(Save as completed) and press F2 again.
    Now save the variant and activate it.
    Now check the tcode, those two buttons will be hidden.
    This will solve your problem.
    Regards
    Karthik D

  • Transaction Variant for XD04

    Dear experts,
    I am creating a Transaction Variant for XD04 in SHD0.
    But in the output screen the data displayed for customer is not captured. Nor the buttons on the output screen.
    The details displayed are sensitive address details of customer which need to be hidden.
    Since it's the data that is displayed in output, is it that Tr Variant will not work in this case?
    Is there any other solution for hiding this data? through some exits?
    Best regards and thanks in advance!
    Sumit

    I'm not sure if this is what you're looking for, but in XD04 it does not look like a variant can be created.
    Have you tried program RFDABL00 executable via SA38?  This is a list of changes to a customer instead of a specific customer.  Variants can be created in this program, and if you'd like to only look for one customer you can specify.
    Hope this helps!
    Andy

  • Transaction Variant for VA01

    Hi All,
    I am able to create transaction variant for transaction code MM01, XD01 and XK01 successfully. But i am unable to create transaction variant for VA01.
    And also some times i am getting error message "SAP Object SCV1(short text of variant) cannot be assigned to package ZXXX". Can you pls let me know why i am getting this error and why i am unable to create transaction variant for VA01 successfully.
    Thanks,
    Raju

    Hi,
    There is no difference in creation of the transaction variant for VA01/02. But the way it works is different. It works at order type level instead of t-code level. You have to create the variant in SHD0 and assign the same in order type customization.
    Alternatively you can populate the field TVAK-VARIANT with the transaction variant name in MV45AFZZ subroutine USEREXIT_MOVE_FIELDS_TO_VBAK/USEREXIT_FIELD-MODIFY. With out this it wont work. Just try to change the TVAK-VARIANT value in debug mode and see if it works fine. Surpricingly it works fine if you individually execute the variant.
    The error you mentioned might be because you might have given one of the screen variant name not starting with Z or Y.
    Thanks,
    Vinod.

Maybe you are looking for