Transaction Variant related problem in Drill Down working

Dear Sir,
We had a business requirement that in CO02 transaction users should now be allowed to change the Material Component quantity . To address this requirement we had created a Transaction Variant YCO02 and it is working in normal course .
However we face problem in certain Drill-Down working . E.g in Tcode COOIS , when users double click a Production Order it goes to CO02 and user has no authorization for CO02 .  Insteat of CO02 , user has authorization for YCO02 .
Pl guide us as how can we resolve this problem.
With Thanks and Rgds
Sonia Agarwal

Dear Mr KrishnamurthyDSS
Thanks for reply .
Pl clarify that can we make Transaction Variant with the same name i.e CO02 . 
If Transaction Variant and  Original Transaction have the same name (i.e CO02) then how to control the authorization , because we want to give authorization only for Transaction Variant one and not for base transaction .
Kindly help me pl .
Rgds
Sonia Agarwal

Similar Messages

  • BPC 7.5 MS Drill Down works on one dimension in rows but not the other

    Good day,
    Working in BPC 7.5 MS.  I have a piped report with 3 dimensions in rows.  Members in the first dimension are hard-coded in the expand range.  The second dimension is a combination of SELF and DEP members.  The third is set to SELF.  In our original AppSet, I can double-click drill down on both the second and third dimensions without issue.
    I've re-created this report in a new AppSet (same BPC version).  All settings are essentially identical (I've double and triple checked).  The drill down works on the second dimension, but not the third.  I've run out of places to look to find the problem.  Any thoughts?
    Thanks in advance.
    Kim

    It took a while but I finally found some quiet time to re-visit this issue.  Thank you for the suggestions above.  Ultimately I verified that the hierarchy, member selection and tables were all ok.
    My next step was to create a new EVDRE with the same members and slowly factor in the piping, membersets, etc.  Drill down worked appropriately.  So that told me something else was at work.
    Turns out the problem was with one of the 'display' columns to the right of the row key range.  These columns use formulas to display a triangle if the member isn't calc, thus giving the end user a visual clue that you can drill down on the member.  Long story short, BPC just didn't like that formula.  A minor change (along with some conditional formatting to replace the piece of formula that was removed) eliminated the problem.  Drill down is now working.

  • Problem with drill down in time dimension - OBIEE 11G

    Hello There,
    I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
    Any suggestions are much appreciated.
    Thanks,
    Harry.

    1.) Congrats for resurrecting a year-old thread.
    2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

  • Problem in Viewer with drill down, Working fine in Plus

    Hi,
    I am using the cross tab reports with drill down functionality. In the viewer version I am getting the following error:
    An error occurred while handling the event. See the application log for more details.
    - The numerical value entered was too low.
    This one working fine in Plus. .
    As for your information this one is working fine in both plus and viewer in development instance and not working in PROD instance.
    Please help me out.
    thanks.

    Update
    Hi Guys the report is working fine with cross tab . Its giving the above error when ever I click the Drill to link which takes to the another detail report.
    thanks in advance

  • Problem displaying drill down STANDARD ALV for a particular record after pressing back button

    I have a simple interactive ALV grid report. NOT 'OO'. It display correctly on initial execution. AT the moment, 6 records. I want it to work such that if i click record '1', a drill-down version of that ALV with only that one record clicked is displayed. This currently occurs correctly. The problem arises when i click the back button and want to click on a new record, say in the 2nd row..this new 2nd row record is not displayed. The first one is displayed again. I tried clearing and fiddling around but then the last record is displayed. I have used the 'ID' field as a 'hotspot' getting picked up by sy-tabindex. Maybe it could be that i shouldn't loop and use  a work area e.g in my select statement. i'm not so sure i've looked around, and tried a few things. I can't get it right yet. My code is below:
    *& Report  ZALV
    REPORT  ZALV.
    TABLES: ZCONTACT.
    TYPE-POOLS: slis. "slis contains all of the ALV data types.
    TYPES: BEGIN OF ty_zcontact.
             INCLUDE STRUCTURE zcontact.
    TYPES: icon TYPE char4, "field holding traffic light value- adding a column to internal table to hold the traffic light
             END OF ty_zcontact.
    DATA: "fieldcatALOG TYPE slis_t_fieldcat_alv WITH HEADER LINE,
           it_zcontact TYPE TABLE OF ty_zcontact,"declares an internal table of type ZCONTACT
           wa_zcontact TYPE ty_zcontact,
           gd_layout TYPE slis_layout_alv,
           gd_repid LIKE sy-repid,
           g_variant TYPE disvariant,
           gx_variant TYPE disvariant,
           g_save TYPE c VALUE 'X',
           it_fieldcat TYPE slis_t_fieldcat_alv,"declares field catalog table of line type alv
           wa_fieldcat TYPE slis_fieldcat_alv, "declares the work area of the field catalog
           it_list_top_of_page TYPE slis_t_listheader.
    DATA: it_fieldcat1 TYPE slis_t_fieldcat_alv,
           wa_fieldcat1 TYPE slis_fieldcat_alv.
    DATA: V_FIELD(30) TYPE C,
    V_VALUE(10) TYPE C.
           "izontact TYPE TABLE OF zcontact.
            "i_logo TYPE OT.
           "ls_layout TYPE slis_layout_alv.
    **Selection Screen details
    *SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    *PARAMETERS: variant like disvariant-variant.
    *SELECTION-SCREEN END OF BLOCK B1.
    SELECT-OPTIONS:
    age FOR wa_zcontact-age,
    lastnme FOR wa_zcontact-lastname.
    **Getting default variant
    *  AT SELECTION-SCREEN ON age.
    *    SELECT SINGLE age FROM zcontact INTO wa_zcontact-age WHERE age = age.
    *  IF sy-subrc NE 0.
    *    MESSAGE:'That age does not exist mate, Please enter another age' TYPE 'E'.
    *    ENDIF.
    INITIALIZATION.
    *gx_variant-report = sy-repid.
    *CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    *EXPORTING
    *  I_SAVE = G_SAVE
    *  CHANGING
    *    CS_VARIANT = GX_VARIANT
    *  EXCEPTIONS
    *    NOT_FOUND = 2.
    *IF SY-SUBRC = 0.
    *  VARIANT = GX_VARIANT-VARIANT.
    *  ENDIF.
    START-OF-SELECTION.
      PERFORM DATA_RETRIEVAL.
      PERFORM BUILD_FIELDCATALOG.
      PERFORM DISPLAY_ALV_REPORT.
      PERFORM top_of_page.
    "g_repid = sy-repid.
    *Fetch data from the database
    FORM DATA_RETRIEVAL.
    SELECT * FROM zcontact INTO TABLE it_zcontact WHERE age IN age AND lastname IN lastnme.
    "assigning traffic light colour to each row based on a condition
    *  IF wa_zcontact-age GE 65.
    *   wa_zcontact-icon = 1. "Red Traffic Light
    *   ELSEIF wa_zcontact-age BETWEEN 40 AND 64.
    *     wa_zcontact-icon = 2. "Yellow traffic light
    *     ELSE.
    *       wa_zcontact-icon = 3." Green traffic light
    *       ENDIF.
    *       MODIFY it_zcontact FROM wa_zcontact TRANSPORTING icon.
    *       CLEAR wa_zcontact.
    ENDFORM.
    FORM BUILD_FIELDCATALOG.
    *Build field catalog
    wa_fieldcat-fieldname = 'ID'.
    "wa_fieldcat-seltext_m = 'The Contact ID'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'LASTNAME'.
    "wa_fieldcat-seltext_m = 'Contact Lastname'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'FIRSTNAME'.
    "wa_fieldcat-seltext_m = 'Contact Firstname'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'DOB'.
    "wa_fieldcat-seltext_m = 'Date Of Birth'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'TEL'.
    "wa_fieldcat-seltext_m = 'Telephone Number'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'ADDRESS'.
    "wa_fieldcat-seltext_m = 'The Address'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'OCCUPATION'.
    "wa_fieldcat-seltext_m = 'The Occupation'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'WEIGHT'.
    "wa_fieldcat-seltext_m = 'WEIGHT'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'AGE'.
    "wa_fieldcat-seltext_m = 'AGE OF THE CONTACT'.
    wa_fieldcat-do_sum   = 'X'.        "Display column total
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'SALARY'.
    "wa_fieldcat-seltext_m = 'SALARY'.
    wa_fieldcat-do_sum   = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    gd_layout-lights_fieldname = 'ICON'.
    ENDFORM.
    FORM DISPLAY_ALV_REPORT.
    gd_repid = sy-repid.
    *Pass data and field catalog to ALV function module to display ALV list
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           it_fieldcat            = it_fieldcat
           i_callback_program     = gd_repid
           i_callback_top_of_page =  'TOP_OF_PAGE'
           i_callback_user_command =  'USER_COMMAND'
           i_structure_name       =  'ZCONTACT'
           i_save                 = 'X'
           is_variant             = g_variant
           is_layout     = gd_layout
    TABLES
           t_outtab      = it_zcontact
    EXCEPTIONS
           program_error = 1
           OTHERS        = 2.
    ENDFORM.
    FORM top_of_page.
    *ALV Header declarations
       DATA: it_listheader TYPE slis_t_listheader,
             wa_listheader TYPE slis_listheader,
             t_line like wa_listheader-info,
             ld_lines TYPE I,
             ld_linesc(10) TYPE C.
    wa_listheader-typ = 'H'.
    wa_listheader-info = 'Contact Details'.
    APPEND wa_listheader TO it_listheader.
    CLEAR wa_listheader.
    wa_listheader-typ = 'S'.
    wa_listheader-info = sy-repid.
    wa_listheader-key = 'Program Name:'.
    APPEND wa_listheader TO it_listheader.
    CLEAR wa_listheader.
    wa_listheader-typ = 'S'.
    wa_listheader-info = sy-uname.
    wa_listheader-key = 'User Name:'.
    APPEND wa_listheader TO it_listheader.
    CLEAR wa_listheader.
    wa_listheader-typ = 'S'.
    wa_listheader-key = 'Run Date :'.
    CONCATENATE sy-datum+6(2)
                 sy-datum+4(2)
                 sy-datum(4)
                 INTO wa_listheader-info
                 SEPARATED BY '/'.
    APPEND wa_listheader TO it_listheader.
    CLEAR wa_listheader.
    wa_listheader-typ = 'S'.
    wa_listheader-key = 'Time :'.
    CONCATENATE sy-uzeit(2)
                 sy-uzeit+2(2)
                 sy-uzeit+4(2)
                 INTO wa_listheader-info
                 SEPARATED BY ':'.
    APPEND wa_listheader TO it_listheader.
    CLEAR wa_listheader.
       CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
         EXPORTING
           it_list_commentary = it_listheader
           i_logo = 'KLOGO'.
    ENDFORM. "top_of_page
    *& Form sub_user_command
    FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
    P_SELTAB TYPE SLIS_SELFIELD.
    CASE P_UCOMM.
       WHEN '&IC1'.
    CASE p_seltab-fieldname.
       WHEN 'ID'.
       READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
       PERFORM DATA_RETRIEVAL1.
       PERFORM BUILD_FIELDCATALOG1.
       PERFORM SECOND_GRID.
       ENDCASE.
       ENDCASE.
    ENDFORM. "
    FORM DATA_RETRIEVAL1.
    SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
    ENDFORM.
    FORM BUILD_FIELDCATALOG1.
    *Build field catalog
    CLEAR: wa_fieldcat, it_fieldcat.
    wa_fieldcat-fieldname = 'ID'.
    "wa_fieldcat-seltext_m = 'The Contact ID'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'LASTNAME'.
    "wa_fieldcat-seltext_m = 'Contact Lastname'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'FIRSTNAME'.
    "wa_fieldcat-seltext_m = 'Contact Firstname'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    ENDFORM.
    FORM SECOND_GRID.
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         I_CALLBACK_PROGRAM = SY-REPID
         IT_FIELDCAT = IT_FIELDCAT
         i_structure_name       =  'ZCONTACT'
         i_callback_user_command =  'USER_COMMAND'
         TABLES
           T_OUTTAB = IT_ZCONTACT.
       ENDFORM.

    Hi Ten Mariga,
                     I wonder why the second select Query is needed at all instead you can use
    ---> Not Needed
    FORM DATA_RETRIEVAL1.
    SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
    ENDFORM.
    ----> Instead you can do
       READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
      Append wa_zcontact to Second_table.
    And you can use the Second_table to display the second ALV. The second Select Query will affect the performance too.
    Cheers,
    Krishnakumar B.

  • Javascript Problem for Drill Down Action in SSRS Report when integrated to PPS 2010

    Hi all,
    I have a SSRS report which is integrated to PPS 2010(Performance Point Services) and it is having a drill down action through Go to URL action(I wrote javascript:void(window.open('xxxxx')) to open drill down report in new window).
    This report has 5 parameters and all are multiple valued. Drill down report is opening very well when I open the report form Report Manager for any number of parameters values selected. But when I integrate the same report is PPS and deployed to SharePoint
    then it is working only for 23 parameter values selected in PPS filters. If I select more the 23 values in PPS filters then the drilldown report is not opening.
    But it is working well in Chrome, I verified in IE and Mozilla, both browsers are having problem.
    When I look at Error Console of Mozilla, it is showing a javascript error as "Error: uncaught exception: ReferenceError: window is not defined" but the same report is working well if I select less than 24 filter values.
    Please provide me the solution
    Thanks in advance

    Hi Vasu,
    The issue might occur due to the Microsoft security update MS11-100 which limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request. Here, I suggest that you modify the Web.config file of the SharePoint site as follows:
    <appSettings>
    <add key="aspnet:MaxHttpCollectionKeys" value="10000" />
    </appSettings>
    If the SharePoint site uses the port 80, the web.config file of the SharePoint site is located in the C:\inetpub\wwwroot\wss\VirtualDirectories\80 folder.
    Reference:
    An ASP.NET request that has lots of form keys, files, or JSON payload members fails with an exception
    If the issue persist, please check whether there are any related errors in the Reporting Services log file which is located in <Drive>:\Program Files\Microsoft SQL Server\MSRSXX.<Instance Name>\Reporting Services\LogFiles.
    Regards,
    Mike Yin
    TechNet Community Support

  • Problem with drill down on hierarchy with data on diffrent levels

    Hello,
    Im working on a project using oracle bi 10.1.3.4.1, and im kinda stuck with some problems.
    I have a transaction table in which i have data about products, something like :
    prod_id
    amount1
    amount2
    and a product hierarchy which is something like:
    prod_id
    prod_name
    parent_id
    since bi doesnt support hierarchies, i had to faltten the hier table to somehing like this:
    prod_id
    lvl1_prod_id
    lvl2_prod_id
    lvl3_prod_id
    lvl4_prod_id
    and use this as my hierarchy in oracle bi. thus when i drill to lvl3, it will find all the products which are decendents of lvl3 value and group them.
    the problem is, that the hier tree is not even, one product data (in transaction table) can be for lvl4 and another for lvl2. so for a lvl2 product id's in level 3 and 4 will be null.
    when i try to drill to lvl 4, it takes all the rows which have the selected value in column lvl4 and group them, and if lvl 4 is null, it would sum up all the rows that have no parent at lvl4...
    i hope you understand... cause it is a bit complicated..
    anyway i would eventually like to add a filter of != null to the column being drilled down.
    but how do i know which column is it?
    i cant add a != null filter to all the columns since most if not all of them will have null in some lvl (lvl 10 or so).
    one suggested solution was to make a report for each lvl with the !=null filter on the report lvl, and use navigate instead of drilldown... but that would mean i have to make 10 reports for each "real" report... a big problem to maintain.
    hope i was clear enough, any suggestions?
    thanks a lot!

    Hi Ingo,
    Thanks for your reply. If I combine two objects in one objects then I cannot use that object for drill down in my report.
    I want to drill down for both Key and Text.

  • Layout problem for Drill down ALV Report

    Hello Everyone,
                           I have developed a ALV drill down report using the method G_GRID->SET_TABLE_FOR_FIRST_DISPLAY. The problem is what ever layout i save for the primary list 'Screen 100' is effecting my secondary list 'Screen 200'.  User need to save both Screen 100 and Screen 200 layouts independently without affecting each other.
    I am calling  screen 100 as below,
    Call metthod g_grid_100->set_table_for_first_display
      Exporting
       i_Save                                     = 'A'
       is_layout                                 =  ls_layout
       is_Variant                                =   ls_Variant
      Changing
       it_outtab                                  =  ct_poitems
       it_fieldcatalog                           =  lt_fieldcat
      Exceptions
       Invalid_parameter_combimation   = 1
       Program_error                            = 2
       too_many_lines                         = 3
       others                                       = 4.
    Could any body suggest me a way to do this..
    Thanks in advance.
    Regards,
    Shyam.

    Hi,
    Use multiple Layout structure (each alv have its own structure) .
    Note the use of disvariant-log_group .
    DATA: gs_disvariant_1 TYPE disvariant ,
               gs_disvariant_2 TYPE disvariant .
    * Layout-Logical groups
    CONSTANTS: gc_log_group_1 TYPE disvariant-log_group VALUE 'ALV1' ,
                            gc_log_group_2 TYPE disvariant-log_group VALUE 'ALV2' .  
    INITIALIZATION.
      PERFORM at_initialization .
    FORM at_initialization .
    DATA: vari TYPE disvariant-variant .
      PERFORM alv_variant_get_default USING gc_log_group_1 CHANGING gs_disvariant_1 vari .
      PERFORM alv_variant_get_default USING gc_log_group_2 CHANGING gs_disvariant_2 vari .
    ENDFORM.
    FORM alv_variant_get_default
      USING
        log_group TYPE disvariant-log_group
      CHANGING
        disvariant TYPE disvariant
        variant    TYPE slis_vari .
      DATA: ls_disvariant TYPE disvariant.
      ls_disvariant-report = sy-repid .
      ls_disvariant-log_group = log_group .
      disvariant = ls_disvariant.
      CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
        EXPORTING
          i_save     = 'A'
        CHANGING
          cs_variant = ls_disvariant
        EXCEPTIONS
          not_found  = 2.
      IF sy-subrc = 0.
        disvariant = ls_disvariant.
        variant    = ls_disvariant-variant .
      ENDIF.
    ENDFORM.                    "alv_variant_get_default
    Later....
       CALL METHOD gui_alv_grid_1->set_table_for_first_display
          EXPORTING
            is_layout       = wa_layout
            is_print        = wa_print
            i_save          = 'A'
            is_variant      = gs_disvariant_1
          CHANGING
            it_sort         = it_sort
            it_fieldcatalog = it_fieldcatalog
            it_outtab       = it_alv_grid_1.
      CALL METHOD gui_alv_grid_2->set_table_for_first_display
          EXPORTING
            is_layout       = wa_layout
            is_print        = wa_print
            i_save          = 'A'
            is_variant      = gs_disvariant_2
          CHANGING
            it_sort         = it_sort
            it_fieldcatalog = it_fieldcatalog
            it_outtab       = it_alv_grid_2.     
    Regards.

  • In OBIEE charts, how do you make drill downs work on custom formulas?

    I posted this over on Linked In and didn't get an anser, so I'm hoping someone here has an answer.
    I'm writing a summary query / chart for a dashboard in OBIEE 10.1 with a drill down (technically it's a "navigation") for more information. This chart breaks down the data by fiscal quarter and by geography (both are columns in the subject area) and I can get this drill down to work just fine. But I also have this chart broken down by some custom calculated fields (CASE WHEN statements) that classify revenue into Forecast / At Risk / Upside etc. (which are not columns or values of columns within the subject area).
    When I add a drill down or navigate function onto those calculated columns, I'm getting a full data set ... not a filtered data set for that particular calculated field. (Yes, I have all of the IS PROMPTED filters set up correctly, and yes the formulas in the source and destination queries are identical).
    Does anyone have any ideas on how to make the drill down or navigation work on custom formulas?
    Thanks
    Ted

    Using the Paint demo
    Report 1 Saved as: */shared/Paint Demo/Sample Analyses/Color Analysis*
    <saw:report xmlns:saw="com.siebel.analytics.web/report/v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sawx="com.siebel.analytics.web/expression/v1" xmlVersion="200705140">
    <saw:criteria xsi:type="saw:simple" subjectArea="Paint">
    <saw:columns>
    <saw:column formula="case WHEN Markets.Region IN ('CENTRAL REGION', 'EASTERN REGION') then 'East Central' WHEN Markets.Region IN ('SOUTHERN REGION', 'WESTERN REGION') then 'South West' else Markets.Region end" columnID="c4">
    <saw:tableHeading>
    <saw:caption>
    <saw:text>Markets</saw:text></saw:caption></saw:tableHeading>
    <saw:columnHeading>
    <saw:caption>
    <saw:text>Region</saw:text></saw:caption>
    <saw:displayFormat interaction="default"/></saw:columnHeading>
    <saw:displayFormat suppress="default" interaction="navigate" wrapText="true">
    <saw:navigation xsi:type="saw:sawNavLink">
    <saw:navTargets>
    <saw:navTarget xsi:type="saw:reportLink" path="/shared/Paint Demo/Sample Analyses/Color Analysis Navigate"/></saw:navTargets></saw:navigation></saw:displayFormat></saw:column>
    <saw:column formula="&quot;Sales Measures&quot;.&quot;% Chg Year Ago Dollars&quot;" alias="" columnID="c3"/></saw:columns>
    <saw:columnOrder/>
    <saw:filter subjectArea="Paint">
    <sawx:expr xsi:type="sawx:special" op="prompted">
    <sawx:expr xsi:type="sawx:sqlExpression">case WHEN Markets.Region IN ('CENTRAL REGION', 'EASTERN REGION') then 'East Central' WHEN Markets.Region IN ('SOUTHERN REGION', 'WESTERN REGION') then 'South West' else Markets.Region end</sawx:expr></sawx:expr></saw:filter></saw:criteria>
    <saw:views currentView="0">
    <saw:view xsi:type="saw:compoundView" name="compoundView!1" rptViewVers="200510010">
    <saw:cvTable>
    <saw:cvRow>
    <saw:cvCell viewName="Title"/></saw:cvRow>
    <saw:cvRow>
    <saw:cvCell viewName="Table"/></saw:cvRow></saw:cvTable></saw:view>
    <saw:view xsi:type="saw:tableView" deck="bottom" headingDisplay="table2Rows" visibleFormats="all" name="Table" rptViewVers="200510010"/>
    <saw:view xsi:type="saw:titleView" name="Title" rptViewVers="200510010"/></saw:views>
    <saw:prompts/></saw:report>
    Report 2 Saved as: */shared/Paint Demo/Sample Analyses/Color Analysis Navigate*
    <saw:report xmlns:saw="com.siebel.analytics.web/report/v1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sawx="com.siebel.analytics.web/expression/v1" xmlVersion="200705140">
    <saw:criteria xsi:type="saw:simple" subjectArea="Paint">
    <saw:columns>
    <saw:column formula="Markets.Region" columnID="c5"/>
    <saw:column formula="&quot;Sales Measures&quot;.&quot;% Chg Year Ago Dollars&quot;" alias="" columnID="c3"/></saw:columns>
    <saw:columnOrder/>
    <saw:filter subjectArea="Paint">
    <sawx:expr xsi:type="sawx:special" op="prompted">
    <sawx:expr xsi:type="sawx:sqlExpression">case WHEN Markets.Region IN ('CENTRAL REGION', 'EASTERN REGION') then 'East Central' WHEN Markets.Region IN ('SOUTHERN REGION', 'WESTERN REGION') then 'South West' else Markets.Region end</sawx:expr></sawx:expr></saw:filter></saw:criteria>
    <saw:views currentView="0">
    <saw:view xsi:type="saw:compoundView" name="compoundView!1" rptViewVers="200510010">
    <saw:cvTable>
    <saw:cvRow>
    <saw:cvCell viewName="Title"/></saw:cvRow>
    <saw:cvRow>
    <saw:cvCell viewName="staticchart!1"/></saw:cvRow>
    <saw:cvRow>
    <saw:cvCell viewName="Table"/></saw:cvRow></saw:cvTable></saw:view>
    <saw:view xsi:type="saw:tableView" deck="bottom" headingDisplay="table2Rows" visibleFormats="all" name="Table" rptViewVers="200510010"/>
    <saw:view xsi:type="saw:titleView" name="Title" rptViewVers="200510010"/>
    <saw:view xsi:type="saw:staticchart" name="staticchart!1" rptViewVers="200510010">
    <saw:template tid="charts/pie.cxml"/>
    <saw:canvasFormat/>
    <saw:selections>
    <saw:categories>
    <saw:category position="0">
    <saw:constant value="1"/></saw:category></saw:categories>
    <saw:measures>
    <saw:column columnID="c3" position="0"/></saw:measures>
    <saw:seriesGenerators>
    <saw:column columnID="c5"/>
    <saw:measureLabels/></saw:seriesGenerators></saw:selections></saw:view></saw:views>
    <saw:prompts/></saw:report>
    The first report navigates and prompts the second report on the calculated field.
    Regards
    Chris

  • Parameter Problem with Drill down reports

    Hi,
    I have created a drill down report.
    I have a master report which list all the employee names and a detail report which list the contact details for each employee selected.
    The URL looks like this http://webser/dev60cgi/rwcgi60.exe?detail&p_empid = 1200
    detail is a kepmapping entry in cgicmd
    this does not work and the detail report does not get the p_empid value.
    Now if i enter the compelete url like http://webser/dev60cgi/rwcgi60.exe?server=rep_ss&report=det.rdf......
    it works.
    Any suggestions !
    Thanks,
    Shailesh
    null

    Hi,
    I got this resolved by using javascript and doing explicit form submit. As our information is highly secured we don't want the users to see any of the URL links from href, browser or from view source.
    I got the first two resolved but when i do a view source i could se in header sections of html view souce the follwing code
    <head>
    < base href="http://webser.../522222.htm>
    </head>
    is there any way using reports i can hide this.
    Any help, suggestions or reference will be highly apprecaited.
    Thanks,
    Shailesh
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by the oracle reports team:
    hello,
    did you specify the token %* in the CGICMD.DAT file so additional parameters are picked up from the URL ?
    regards,
    the oracle reports team<HR></BLOCKQUOTE>
    null

  • Drill Out Problem with drill down

    Hello,
    help needed.
    I have two workbooks. The first consists of a hierachical Rowset. This workbook ist stored complettly collapsed.
    When I open it in Portal and use the option "analyze" and after that follow a drillout link to the second workbook it works.
    When I open it in Portal and use the option "analyze" open one level of the hierarchy and after that follow a drillout link to the second workbook the "save dialog" apears. If I answer yes I get an error and also if the answer is no.
    I also set in the discoverer\configuration.xml the flag saveWorkBehavior="never_save" nothing (still asking).
    Logging level is none
    Discoverer 10.1.2.48.18 with patch 5729515
    Can anybody can give me a solution, workaround or hint
    Application.log
    07/01/09 14:54:18 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-6] oracle.discoverer.applications.framework.ApplicationController._logException error.handling.event
    oracle.discoverer.applications.framework.ApplicationException: error.handling.event
         at oracle.discoverer.applications.framework.GlobalExceptionHandler.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processException(RequestProcessor.java:553)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:486)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
         at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.NullPointerException
         at oracle.discoverer.applications.framework.RawRequest.populateParameters(Unknown Source)
         at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
         at oracle.discoverer.applications.framework.RawRequest.initDeferredRequest(Unknown Source)
         at oracle.discoverer.applications.framework.RawRequest.<init>(Unknown Source)
         at oracle.discoverer.applications.framework.ApplicationController.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         ... 14 more

    Hi user 552235...
    I am not sure if my next post will help you, since I am not working with portal, but I had a problem with drill to link in the same disco version (10.1.2.48.18) and the problem solved after applying patch 5507746 for bug 5475467.
    You can read more in metalink with the number I supplied you and try in a test environment of course...
    Hope this will help you solving your problem, if it does please update the thread for the rest of our community...
    Gidi Halamish

  • Problem creating Drill-Down report

    Hi,
    I have problem in creating a drill-down report,got confused how to do it. this is my requirement.
    The main portion that will be first displayed contains a group on match_code and has its own detail section. now when the user selects one of these match_code it should drill down to give more information about this match_code, so the Drill down should also have its own detail section that will be hide and drilldown ok.
    If this the proper way to do it. I will be creating a drill down report for the first time.
    Thanks,
    Reena

    Hello Reena,
    If I understand your situation correctly you have a group on match_code and a details and b section. You want the Group Header and Details a sections to appear on the first "page" or drilldowngrouplevel 0. When the user drills down you want the Details b section to appear.
    You can do that using the drilldowngrouplevel function.
    Set the details b section to suppress when drilldowngrouplevel = 0, this section will only appear after drilldown.
    I am not sure if you still want the details a or group sections to appear after drilldown, if you do then there is no need for conditional suppression. If you don't then use a conditional suppression formula for those sections of drilldowngrouplevel <> 0

  • Problem in Drill down the PPT produced by Xcelsius

    I usually prepare the PPT using Xcelsius s/w. That PPT can be drilled down in my office system but it could not drillled down in my client system. This problem is for this month. In the past i didnt face this issue.
    When i try to drill down its giving an error message as " Some controls cant be activated in ur system"
    Can anyone please help ?

    I've had a similar problem going back and forth between systems with Office 2003 and Office 2007 loaded on them.  If the file is viewed from an Office 2003 machine the next time it's opened on a 2007 machine it crashes.  I have reinsert the chart each time.  I'd love to stop doing this!

  • Problem with Drill down using Pie chart

    Hi all,
    I have a dashboard which displays sales according to product category in which I'm using combo box for category.
    Based upon the selection the corresponding products are displayed in the Pie chart and when I click a particular
    product its total sales value should be displayed in a Guage.
    The problem is if for one category there are 10 products the pie chart is showing only 5 labels if drill down option is checked
    and if its not then its showing all the products......
    What could it be ??
    Thanks
    John

    Hi John
    Is this fixed now?
    Regards
    [Charles|http://www.reportex.co.uk/xc_dataload.html]

  • Problem on Drill Down

    Hi Guru,
    In the Opportunity summary report, I have where condition which is Created Date is GREATER THAN 04/09/2008 and when I click data in column 'Report to' to drill down,It'll show Opportunity Detail report.My problem is when it show Opportunity Detail report,It get all the reocrds from the system which include Created Date is LESS THAN 04/09/2008.I already added where condition Created Date is greater than 04/09/2008 in both Opportunit Summary and Opportunity Detail report
    Any Idea?Please advice.
    Pitiporn

    Finally I sovled it by changing the criteria of Created Date from "Create Date >= ... " and "Created Date <= ..." to "Created Date between ... and ..."

Maybe you are looking for