Transactional Data Load without Respective Master Data in Place

Hi Folks,
Could anyone let me know if i could load transactional data without loading the respective master data. If yes, well could you give me a scenario when you do it. Also could you let me know the option of how to load transactional data without master data in place.
Best Regards,
Prithvi

Hi,
You can load transaction data without loading master data.
You have the option in the info package to load data even if no master data exists..
You may use it in cases where your transfer rules/update rules or routines donot refer to master data tables to populate transaction data..
Ashish

Similar Messages

Full load - Every month data loading without deleting previous data

Dear SDN,
I am loading (Full load) Data from 001.2005 to 010.2007 using 0FI_GL_1 with the selection option Fiscal Year/Period (From : 001.2005 and To : 010.2007) ...
From next month (011.2007) onwards, when loading data everytime it deletes entire data and again loading (Since i have kept an option in Infopackage -- Datatargets Tab -- Delete entire content of datatarget)...
My doubt is wheather without deleting the whole data, can we load from next month data onwards...so, if that is the case shall i use Fiscal year/Period range ?? (or) should not use Fiscal year/Period range...
But the client needs data only from 001.2005 onwards not beyond that
Please help me to resolve this issue..
Help will be greatly appreciated with points...
Thanks....

Hello Venkat,
Unfortunately you can not do that way, because in period 11.2007 (assume this is the period that you want to newly load to cube.) there might be posting in previous period. And these postings made to previous period should also reflect to cube. Only way is delete and reload by using full.
Other option you might use a ODS before sending to cube. you might every time load full data, ODS key fields might be checked by system and neccesary inserts and updates will be done by system, so there wont be duplications. And finally only new data will be sent to cube as delta.
Sarhan.

Data load error for master data

hi
both errors i need to fix manually or any automatic is there
psa i need to edit that record and run again infopackage.
i need keep that infoobject(BIC/ZAKFZKZ ) alpha conversion at infoobject level.
Errors in values of the BOM explosion number field:
Diagnosis
Data record 5584 & with the key '001 3000000048420000 &' is invalid in
value 'BOX 55576\77 &' of the attribute/characteristic 0RT_SERIAL &.
InfoObject /BIC/ZAKFZKZ contains non-alpha compliant value 1

Hi Suneel,
I feel that the symbol '&' is cauing the issue in ur data loads..
So try to edit the same at the PSA and then load the data from PSa to the target..
Also u can use RSKC to handle these special Chars..
For more information u can search SDN..
Thanks
Hope this helps

Load Failure for Master Data object

Dear Sdns,
                    Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
rror message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using
update mode R . However, this is not supported by the InfoSource.
Kindly Help me if any of the Snd people might have face this kind of problem...
Answering Getz Appreciated,
Warm Regards,
Aluri

Hi Aluri,
The file might be used or being edited by some other person when you are doing the delta.
CHeck the source system connection @ AWB.activate it.
Follow these steps
1. Activate transfer rules for data source in source system.
2. Activate the ODS
3. Activate the update rules (ods to ods and also ods to cube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
Then start data loading again.
Hope this helps.
Assign points if useful.
Thanks & Regards,
Bindu

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes)

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes data).
Regards
Dhirendra
Moderator message - Moved to correct forum
Edited by: Rob Burbank on Apr 21, 2009 8:58 AM

Route definition is done at 0VTC. You have define the Route with its description, Transit time, factory calender, carrier info etc. It is stored in TVRO table
Then yoiu will maintain the route determination in 0VRF.
Route Determination:
Dep zone of the shipping point + Destination zone (T-zone) of the ship-to + Transportation group + shipping conditions.
Route determination details are stored in TROLZ table.

What r the ways to reduce the load time of master data

Hi
The full load of the master data load IP is taking 18hr to 2 days loading on average 2516360 Records
Is their any option to reduce load time as its causing data base lock and impacting transports(other than data selection)
Thanks in advance
Anuj

You will have to do some research. What MD extractor are you talking about?
Test on R/3 system: First try to extract a considerable amount of records via transaction RSA3 in R/3 (10.000 or 100.000). Keep the time that it takes.
Extract the same into BW but only into PSA. Again measure the time.
Load data from PSA into datatarget and see how long this takes. You should now have a picture on where the performance problems are located.
Is the performance also bad for small loads or is there a boundary before which performance is ok. (in other words, is loading 200.000 records ten times longer then loading 20.000 records?)
Suspect the following in R/3:
- datasource enhancements in R/3. A redesign may improve your extraction in a big way.
- missing indexes. If you are extracting data from tables without proper indexes the extraction performance can be dramatic.
Suspect the following if loading to PSA is bad:
- Datapackage reads data in small chunks (much smaller than 50000 records). Overhead causes more time than the actual data transport.
- Network problems. Maybe the network is congested by other servers?
If loading from PSA to datatarget is slow:
- Check start routines for performance.
- Are enough batch partitions available? Sometimes activation of ODS can be improved by more parallel processes.
- Are you using a lot masterdata-lookups when filling the datatargets?
When you report you findings in this forum we may be able to help you further.

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Is there any transaction to view the customer master data ...

is there any transaction to view the customer master data ...i me all the datats so that ui can prepare a report......

Hi Sunaina Kumar,
From Funtioanl Point of view
XD02 or Xd03 - Chane / Display Customer Centrally ( With Company Code Data)
VD02 or VD03 - Change / Display Customer - Sale and Distribution( With out Company Code Data.
From Technical Point of View:
SE11 or SE16
Table Name : KNA1 or KNB!
From here you can view all the customer data.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Parallel load of InfoProvider master Data

Hi, I have a Master Data object configured as an infoprovider. I am trying to load the object from 2 different sources in parallel in my process chain. This seemed to work in my dev environement, but one of the loads is failing because of master data lock.
There are no duplicate characteristics between the 2 sources so no conflicts exist there. Is it just that I cannot load 2 sources into the master data infoprovider at the same time?
ThankS!

Hi Kenneth,
On the following (parallel) processes lock situations can occur:
- Hierarchy and attribute change runs is locking temporarily parts of a BW system
- Loading master data for the same InfoObject (risk when loading in parallel master data out of several source systems)
( Can be avoided (if wanted) by applying note 421419)
- Rolling up data of the same InfoCube
- Selective deletion on InfoCube and parallel loading
- Activation or deletion of ODS object data and loading it
Best regards,
Eugene

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

Loading time-dependent master data using update rules/transformations

Hi
I am trying to load time-dependent master data to an infoobject. It seems that I get an error message on duplicate records if I use a transformation or update rule. Does this only work with direct update ?

In the DTP you have the option to ignore duplicate records....
Just select that and then load data...

How to load data for attribute of Master Data Object from PSA

Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSA

Jr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help

Load customer text master data error

Hi Experts:
When load customer text master data ,system show the following error message ,could you please
help me to solve the problem , thanks a lot
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

Delete PSA request from Datasource -> manage
Do a fresh load and Goto to infopackage monitor
Environment --> Short Dump --> in Source System...... Click 'TODAY'
Next screen would show u all Runtime Error... Double click on the first one
from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
By doing this U can find out what exactly is the problem

Can we restrict a master data characterstic using another master data chara

Hi All,
Can we restrict a master data characterstic using another master data characterstic, if they were both compounded together. There are two fields viz.., A,B in r/3 master data table in which A and B combinely serve as a key. In BW side i have created a master data object for A and compuded object B ot it. So that i am getting all the data from r/3 table. But in query designer when i am trying to restrict object A values by object B, in a structure i am not getting any data. If i do same out of structure i am getting data in report. Please help in overcoming this problem.
Regards,
Rajkandula

Hi,
Yes it should display data, but it is not displaying. If i am doing the same restriction out side of a structure i am getting data. But whilr trying to do so, i am not getting that. The reason why i am bothering about structure is 'Objext B have 10 different values and i want 10 coloumns in report in whicg Obj A must display respective data when i restrict it by B' , whicg i can do this only if i use structure else i can't restrict B that many times .
I hope u got my problem and plz give help me in this.
Regards,
Rajkandula

Web report data provider change from Master data table to InfoCube

hi Experts,
I have created one report on top of multiprovider but in the selection screen when i check the values for a variable I came to know that data is coming from master data table and not from data provider(InfoCube).Can any one help to change the data selection from master data table to data provider(InfoCube) and i am sure that there is no ODS involved in the multiprovider.
Thanks in advance
With Regards,
Bala

Hello,
If u are using Analyser then just put a Analysis Grid on the output of the query(should cover all the rows and column) , click on the grid and put the dataprovider. and do auto fit.
Rohit

Transactional Data Load without Respective Master Data in Place

Similar Messages

Maybe you are looking for