TransactionAttribute REQUIRED automatically rolls back on a RuntimeExceptio

Hi ,
While going through tutorials of Transaction Attributes on EJB .
I have read that REQUIRED automatically rolls back on a RuntimeException .
I have a query here , Please tell me When a CheckedException Arises , how can we manually rollback the Transaction ??
Thanks in advance .

Hi Ravi,
When using container-managed transactions (which is the default), the application can call SessionContext(or MessageDrivenContext).setRollbackOnly() to ensure that the current transaction will not commit. The easiest way to acquire the EJB context is to inject it :
@Resource SessionContext sessionContext;
--ken

Similar Messages

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation a

While installing Acrobat XI Pro, the installation automatically rolls back and I get the message "The wizard was interrupted before Adobe Acrobat XI Pro (11.0.07) could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again." How to resolve it.
How do I modify the system.

Hi Rgardezi,
The only reason why Acrobat installation fails and throw this error message is when there are some services running in the background causing the installer not to complete the installation. My take is try the following steps and suggest if you were able to install the products or not :
1) Navigate to control panel and confirm that there is no line Item that talks about Acrobat. If you see Acrobat XI listed there, please remove them.
2) Perform a selective Start up using the steps mentioned in this link.
Please suggest if the above mentioned steps were able to resolve the query for you or not.
Cheers,
Kartikay Sharma

Oracle 10g Paremeter to Auto Roll Back uncommited transanctions

Hi all
In SME Segment - People donot affort having Oracle Dba and at the same time less experienced persons keep making their own tests
Situation goes as under :-
a) Oracle 10g Windows 2003 64 Bit version on Branded HP Server with 8GB Ram having around 100 simultaneous users
b) User A on Machine A fires command say
Table Iledg has inventory data say around 2 Million records
Update iledg set gwt = netwt + corewt where vrdate >= ??? and vrdate <= ??
Records get updates - But user A does either of the following
i) Does not give commit
ii) Preses Ctl + Alt + Del
iii) Switches off the Computer
Problem
All other users get hanged for their Transanctions relating to table Iledg. EDP person is not able identify the culprit i.e User A
We have already tried - that if we kill the session of User A , position becomes OK
Solution wanted for
a) Set some Oracle Parameter which automatically rolls back un committed transnactions for say 5 Minutes
b) Oracle automatically kills those sessions who have un commited transanctions for more than say 5 minutes.
Because in SME Segment - It is very difficult to ask the users to fire some very technical commands to find out the culprit and to kill their sessions. At the same time we can not start the server again and again.
Suresh Bansal

Thanks for the reply.
We were also very sure about Oracle 10g beharviour but it actually does not happen in abnormal disconnections.
We tested this way
a) Table Iledg has inventory data say around 2 Million records
Machine A fires command say
Update iledg set gwt = netwt + corewt where vrdate >= ??? and vrdate <= ??
Oracle Results -> ?? rows updated ->Did not gave commit command ->Intentionally to test it switched off the machine without Exiting from
SQL*Plus
then on Machine B)
Again tried to
Update iledg set gwt = netwt + corewt where vrdate >= ??? and vrdate <= ??
Session of Machine A is not killed by Oracle 10g and is blocking the Transanction of Machine B which is very unfortunate as we thought Oracle 10g must have killed the session of Machine A when he switched off his Machine. When blocking_session of Machine A is killed ->Position becomes absolutely OK and normal.
This can be tested in just 2 minutes at your end.
Kindly suggest some workable remedy to overcome such abnormal client disconnections. Setting Profile idle time is not the workable solution as we create Oracle Connection at the start of VB6 application and that connection goes on thru out applications for all reports and transanctions.
This kind of problem is not faced in last 6 years over the same forms. But now the client network has grown to say 700 Computers and is creating problems intermittently which is diagnosed properly and terminates the Oracle Connections which sometimes creates these kinds of problems.
Suresh Bansal

Roll back to version 27. Version 28 crashes required plugins.

I need to roll back to version 27. It decided to update automatically even with that "feature" turned off. This means that several plugins quit working so things I need to do for work don't function any more. This "update" is costing me money! Should I just do a real upgrade and switch to Chrome?

What add-ons are not working in Firefox 28?
Also, why are you running Flash 11.4? The current versions are 12.0, and the long term support version, 11.7.
This article has a link for the older (warning: vulnerable) version of Firefox: [[Install an older version of Firefox]].
Also, why not install Google Chrome and try it out?

How Can I Roll Back my iTunes Library?

I'm guessing it may no tbe possible at all, but here goes.
What I would like to do with my music estate is roll back my current iTunes library file, automatically updated to iTunes 11 when updated on MPBr when this was my only PC using iTunes. Now I have three and some iOS devices too. My library has been moved from windows machines to macs and is several years old and has received 100s of hours of tweaking to get it just right.
Now my server is a PowerPC mac and I can only go as far as iTunes 10.6.xx, I want this to be always on and share the library with other PCs accross home sharing (i will sync iPhones over the wi-fi with this PC too, though it may not play with iOS7, so perhaps not).
I want to see the iTunes library on the macbooks, probably through Home Sharing, I also want to be able to sync the iphones, but only have a single copy of the music files on the server. is this possible? This will just be for when out of the house as I can also use home sharing in the house for music.
Thanks

You say you want to do this with multiple devices. Let's say you have a new iPhone 5 that requires iTunes 11. You will not be able to sync that if your base iTunes is iTunes 10.6 since your hardware will require at least whatever version of iTunes was current at the time of purchase. You're seeing this with your iOS7 phone. Anyway, unless all your hardware is old enough to use the lowest version of iTunes you need to run, you may be out of luck. You cannot share the library. Sharing media is different, and relatively easy, but it will be complex to ensure all the multiple libraries are kept up to date.
You also can't roll back iTunes libraries to earlier versions unless you kept a backup of your library from the point to which you wish to revert, or it is still in the previous libraries folder.

Roll back OSX just a little - How long?

Hi There,
My Macbook has slowed since installing various updates. Logic is hopeless.
If I roll back a couple of days using T.M. and my leopard install disc will it take all day and all night replacing the lot from my back up HD, or will it simply remove the little I have achieved since the update?
I need to know before I embark upon this process.
Please help
John Paul

Why not perform some maintenance instead:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com.

Apple Mobile Device Service installation rolls back

Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
Cheers

I have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam

Data Services job rolling back Inserts but not Deletes or Updates

I have a fairly simple CDC job that I'm trying to put together. My source table has a record type code of "I" for Inserts, "D" for deletes, "UB" for Update Before and "UP" for Update After. I use a Map_CDC_Operation transform to update the destination table based on those codes.
I am not using the Transaction Control feature (because it just throws an error when I use it)
My issue is as follows.
Let's say I have a set of 10,000 Insert records in my source table. Record number 4000 happens to be a duplicate of record number 1. The job will process the records in order starting with record 1 and begin happily inserting records into the destination table. Once it gets to record 4000 however it runs into a duplicate key issue and then my try/catch block catches the error and the dataflow will exit. All records that were inserted prior to the error will be rolled back in the destination.
But the same is not true for updates or deletes. If I have 10000 deletes and 1 insert in the middle that happens to be an insert of a duplicate key, any deletes processed before the insert will not be rolled back. This is also the case for updates.
And again, I am not using Transaction Control, so I'm not sure why the Inserts are being rolled back, but more curiously Updates and Deletes are not being rolled back. I'm not sure why there isn't a consistent result regardless of type of operation. Does anyone know what's going on here or what I'm doing wrong/what my misconception may be?
Environment information: both source and destination are SQL Server 2008 databases and the Data Services version we use is 14.1.1.460.
If you require more information, please let me know.

Hi Michael,
Thanks for your reply. Here are all the options on my source table:
My Rows per commit on the table is 10,000.
Delete data table before loading is not checked.
Column comparison - Compare by name
Number of loaders - 1
Use overflow file - No
Use input keys - Yes
Update key columns - No
Auto correct load - No
Include in transaction - No
The rest were set to Not Applicable.
How can I see the size of the commits for each opcode? If they are in fact different from my Rows per commit (10,000) that may solve my issue.
I'm new to Data Services so I'm not sure how I would implement my own transaction control logic using a control column and script. Is there a guide somewhere I can follow?
I can also try using the Auto correct load feature. I'm guessing "upsert" was a typo for insert? Where is that option?
Thank you very much!
Riley

Glitches in address fill-ins with nicknames; default font problem; plus other glitches in Thunderbird 31.3.0 and 31.4.0; can I roll back to an earlier version?

I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.

Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again!

Folders rolling back in finder view in 10.6 connected to a 10.6 server.

I have a server 10.6 with all updates and some times when i connect from 10.6.8 clients by AFP some folders roll back automatically any ideas?

By default the Windows Server 2008 will not have the Line Printer Daemon Service installed and running. With the Server 2008 configured with the Print Services role you need to select the TCP/IP Print Server (LPDSVC) service which allows computers that are using the Line Printer Remote (LPR) service to print to shared printers on this server. The Select Role Services wizard also creates an inbound TCP exception on port 515 for LPD in the Windows Firewall with Advanced Security.
With this enabled you should then be able to use the LPD queue you created on the Mac's to print to the Windows shared queue. Note that the Queue Name on the Mac will be the name of the share used on Windows. A good tip is to keep the share name short and without spaces.
Note that when you type the IP followed by \HP4015, you are connecting via RPC/SMB. For Windows this is known as Point & Print and while the Mac can connect to this same queue, you cannot use the same procedure. Instead you can use the Windows icon within the Add Printer browser to browse the workgroup then the computer name. When selected you often have to enter user credentials saved on Windows to then see the printer share. When the queue creation is completed you then can print but often have to authenticate every time you print. This is why LPD is preferred. The other thing is that with SMB connections, you often cannot use the vendors driver for consumer products. But if this HP is a LaserJet that supports PostScript then there won't be the same limitation.
Pahu

MDB transaction getting silently rolled back?

          I have an MDB that is doing a delete of a database record in the onMessage method.
          It seems to work fine. I see no errors in the log, in fact I have some debug
          statements that indicate everything was completed normally. I even do a count
          sql using the same where clause and print the results and see a '0'.
          However, when I check the database, the record is still there.
          It seems as if the transaction is getting rolled back somehow. The MDB is transaction
          required/container tx. I never setRollbackOnly anywhere.
          The topic was originally published in a transaction that was rolled back, if that
          makes any difference. In fact, the point of the MDB is to clean up a record that
          was created during the transaction but not within the transaction.
          Any help is appreciated!
          ken


          It turned out that the MDB was using a different connection pool than it should
          have, which was pointed to an old copy of the database. So it wasn't really rolling
          back, it really was deleting records as desired, just in the wrong database.
          Thanks
          ken
          Tom Barnes <[email protected].bea.com>
          wrote:
          >Some random ideas:
          >
          >Is the app sending a delete request to the MDB, and
          >the MDB acting on it, before the record is even inserted?
          >
          >Does the delete request have the correct row-id/PK?
          >
          >Is the MDB app failing without your knowledge? You
          >can instrument the MDB onMessage() with a
          >"try catch Throwable" to see.
          >
          >Is the MDB tx timing out trying to get a lock
          >on the row? You can instrument the onMessage
          >with timestamps to see if its taking longer than 30 seconds...
          >
          >Tom
          >
          >Ken Clark wrote:
          >
          >> I have an MDB that is doing a delete of a database record in the onMessage
          >method.
          >> It seems to work fine. I see no errors in the log, in fact I have
          >some debug
          >> statements that indicate everything was completed normally. I even
          >do a count
          >> sql using the same where clause and print the results and see a '0'.
          >>
          >> However, when I check the database, the record is still there.
          >>
          >> It seems as if the transaction is getting rolled back somehow. The
          >MDB is transaction
          >> required/container tx. I never setRollbackOnly anywhere.
          >>
          >> The topic was originally published in a transaction that was rolled
          >back, if that
          >> makes any difference. In fact, the point of the MDB is to clean up
          >a record that
          >> was created during the transaction but not within the transaction.
          >>
          >> Any help is appreciated!
          >>
          >> ken
          >

Roll back to itunes 10.7 from itunes 11

Recently my iMac updated to iTunes 11 automatically as part of its update process. I find that I hate this new version of iTunes and so I tried to roll back to the previous version (10.7 in my case). I figured out how to uninstall / delete iTunes 11, I downloaded the previous version from apple.com and ran the installer. I restored my previous iTunes Library file and openned iTunes. All my playlists, play counts, etc are there appropriately and everything looks good at first glance. However, my iPod and iPad can no longer sync and iTunes is telling me to restore them both to factory settings which I'd rather not do. I also can no longer connect to my iTunes library via my local area network from my Windows based machines (haven't been able to try from another Mac, yet). Any ideas on what I did wrong and more importantly how to fix these annoying problems? Thanks!

Thanks. This may work for the iPod and iPad although I'm not terribly interested in reorganizing all the apps and data on both devices unless absolutely necessary. Also, this does not address the problem of not being able to access the library over the LAN from other computers running iTunes.

Roll back in Adapter DataBase using Polling | BPEL 11g

Hello Guys,
I'm having a problem with roll back for polling "Update a field in Table(Logical Delete)" in DataBase Adapter BPEL 11g.
My process is:
Does polling in the table from the database changed the value in column from 0 for 1 and then put the message on a JMS queue.
The problem is:
When an exception occurs in the process, for example, exception when posting message in the queue, he does not roll back the database, then the value in the table column is changed to 1 and not 0 as it should.
Adapter Data Base:
Oracle XA
Properties BPEL(Composite):
<binding.jca config="XXXX_db.jca">
    <property name="singleton">true</property>
</binding.jca>
<component name="XXXXX" version="2.0">
    <implementation.bpel src="XXXXX.bpel"/>
    <property name="bpel.config.transaction" type="xs:string" many="false">required</property>
    <property name="bpel.config.oneWayDeliveryPolicy">sync</property>
</component>
Properties JCA of Data Base:
<property name="DescriptorName" value="XXXXXXXXX"/>
      <property name="QueryName" value="XXXXXXSelect"/>
      <property name="MappingsMetaDataURL" value="XXXXXX-or-mappings.xml"/>
      <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
      <property name="MarkReadColumn" value="STATUS"/>
      <property name="MarkReadValue" value="1"/>
      <property name="MarkReservedValue" value="2${weblogic.Name}-${IP}"/>
      <property name="MarkUnreadValue" value="0"/>
      <property name="PollingInterval" value="5"/>
      <property name="MaxRaiseSize" value="1"/>
      <property name="MaxTransactionSize" value="10"/>
      <property name="NumberOfThreads" value="1"/>
      <property name="ReturnSingleResultSet" value="false"/>
Its roll back?
Could anyone please help me on this.
Tks,
Azevedo, Artur.

You need to ensure that your process is working in a single transaction.
You are correctly using the XA datasource.
Next you need to ensure that you do not have a dehydration point in the process and if there is a call to another BPEL process they are in a same transaction.

Toplink 9.0.4.8 and JTS on OAS 10.1.2.0.0 and 10.1.2.0.2 not rolling back

Re-Posting message with more information.
Toplink 9.0.4.8 and JTS not rolling back transaction
Hi
Scenario:
I have a session bean (EJB1) calling a session bean (EJB2).
When an EJB1 is called, EJB1 persists data on to Table1 in database.
And EJB1 makes multiple calls to EJB2 to create entries in three different tables. Trans-attribute is set as required on both EJBS.
Problem:
EJB1 gets a Runtime Exception while inserting the data into TABLE1 (ORA-12899: value too large for column), EJB1 transaction is rollback, but all other transactions related to EJB2 are getting committed. I assume that they should roll back too.
Also, I did JAD on external transaction controller and listener and noticed that there is a transaction associated to each call. Meaning EJB1 had Transaction T1 and EJB2 had T2, T3, and T4 for the subsequent calls. When EJB1 is getting runtime exception in the method beforeCompletion(), the it calls rollbackGlobalTransaction() which is calling T1.setRollbackonly(). But not on on T2, T3, and T4 rollback
Am I missing anything?
Please help me
Here are my configuration details:
The datasource configuration:
<data-source name="myTxDataSource"
class="com.evermind.sql.OrionCMTDataSource"
location="jdbc/myTxDataSourceCoreDS"
xa-location="jdbc/xa/myTxDataSourceXADS"
ejb-location="jdbc/myTxDataSourceDS"
pooled-location="jdbc/myTxDataSourcePooledDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="duser"
password="d123"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"
/>
Sessions.xml
<login>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@localhost:1521:orcl</connection-url>
<datasource>jdbc/DimpleTxDataSourceCoreDS</datasource>
<user-name>duser</user-name>
<encryption-class-name>oracle.toplink.internal.security.JCEEncryptor</encryption-class-name>
<encrypted-password>22F7AFE6F6B9672435537CE1189E123DD62D1A19DF561D1E</encrypted-password>
<uses-native-sequencing>true</uses-native-sequencing>
<uses-external-connection-pool>true</uses-external-connection-pool>
<uses-external-transaction-controller>true</uses-external-transaction-controller>
</login>
<external-transaction-controller-class>oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController</external-transaction-controller-class>
Toplink Helper class that is used by both EJB's
This one uses SessionBroker. here is how it is initialized:
SessionManager manager = SessionManager.getManager();
sessionBroker = (SessionBroker) manager.getSession(xmlLoader,
sessionBrokerName, this.getClass().getClassLoader());
Oracle9iJTSExternalTransactionController extController = new Oracle9iJTSExternalTransactionController();
sessionBroker.setExternalTransactionController(extController);
It has common following commong methods:
public UnitOfWork getUnitOfWork() {
UnitOfWork uow = sessionBroker.getActiveUnitOfWork();
return uow;
public Object create(Object o)
UnitOfWork uow = getUnitOfWork();
uow.registerNewObject(o);
// added so that the assigned sequence number will be available before the commit happens
uow.assignSequenceNumber(o);
return o;
}

A couple of this appear different in your sessions.xml. To do what you want you need to configure TopLink to:
1. Use an external XT controller - requires flag to be set and controller provided
2. Use the OC4J data source - requires flag to be set and data source name provided
I notice that your sessions.xml has both a data source name as well as a direct connection URL.
Here is a sample that shows the proper settings for the external TX and data source usage:
<?xml version = '1.0' encoding = 'UTF-8'?>
<!DOCTYPE toplink-configuration PUBLIC "-//Oracle Corp.//DTD TopLink Sessions 9.0.4//EN" "sessions_9_0_4.dtd">
<toplink-configuration>
   <session>
      <name>default</name>
      <project-xml>META-INF/tlMap1.xml</project-xml>
      <session-type>
         <server-session/>
      </session-type>
      <login>
         <datasource>jdbc/DimpleTxDataSourceCoreDS</datasource>
         <platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</platform-class>
         <uses-external-connection-pool>true</uses-external-connection-pool>
         <uses-external-transaction-controller>true</uses-external-transaction-controller>
      </login>
      <external-transaction-controller-class>oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController</external-transaction-controller-class>
      <enable-logging>true</enable-logging>
      <logging-options>
         <print-thread>false</print-thread>
         <print-date>false</print-date>
      </logging-options>
   </session>
</toplink-configuration>Doug

Toplink 9.0.4.8 and JTS on OAS 10.1.2.0.0 and 10.1.2.0.2 not rolling back t

Toplink 9.0.4.8 and JTS not rolling back transaction
Hi
Scenario:
I have a session bean (EJB1) calling a session bean (EJB2).
When an EJB1 is called, EJB1 persists data on to Table1 in database.
And EJB1 makes multiple calls to EJB2 to create entries in three different tables. Trans-attribute is set as required on both EJBS.
Problem:
EJB1 gets a Runtime Exception while inserting the data into TABLE1 (ORA-12899: value too large for column), EJB1 transaction is rollback, but all other transactions related to EJB2 are getting committed. I assume that they should roll back too.
Also, I did JAD on external transaction controller and listener and noticed that there is a transaction associated to each call. Meaning EJB1 had Transaction T1 and EJB2 had T2, T3, and T4 for the subsequent calls. When EJB1 is getting runtime exception in the method beforeCompletion(), the it calls rollbackGlobalTransaction() which is calling T1.setRollbackonly(). But not on on T2, T3, and T4 rollback
Am I missing anything?
Please help me
Here are my configuration details:
The datasource configuration:
<data-source name="myTxDataSource"
class="com.evermind.sql.OrionCMTDataSource"
location="jdbc/myTxDataSourceCoreDS"
xa-location="jdbc/xa/myTxDataSourceXADS"
ejb-location="jdbc/myTxDataSourceDS"
pooled-location="jdbc/myTxDataSourcePooledDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="duser"
password="d123"
url="jdbc:oracle:thin:@localhost:1521:ORCL"
inactivity-timeout="30"
/>
Sessions.xml
<login>
<driver-class>oracle.jdbc.driver.OracleDriver</driver-class>
<connection-url>jdbc:oracle:thin:@localhost:1521:orcl</connection-url>
<datasource>jdbc/DimpleTxDataSourceCoreDS</datasource>
<user-name>duser</user-name>
<encryption-class-name>oracle.toplink.internal.security.JCEEncryptor</encryption-class-name>
<encrypted-password>22F7AFE6F6B9672435537CE1189E123DD62D1A19DF561D1E</encrypted-password>
<uses-native-sequencing>true</uses-native-sequencing>
<uses-external-connection-pool>true</uses-external-connection-pool>
<uses-external-transaction-controller>true</uses-external-transaction-controller>
</login>
<external-transaction-controller-class>oracle.toplink.jts.oracle9i.Oracle9iJTSExternalTransactionController</external-transaction-controller-class>
Toplink Helper class that is used by both EJB's
This one uses SessionBroker. here is how it is initialized:
SessionManager manager = SessionManager.getManager();
sessionBroker = (SessionBroker) manager.getSession(xmlLoader,
sessionBrokerName, this.getClass().getClassLoader());
Oracle9iJTSExternalTransactionController extController = new Oracle9iJTSExternalTransactionController();
sessionBroker.setExternalTransactionController(extController);
It has common following commong methods:
public UnitOfWork getUnitOfWork() {
UnitOfWork uow = sessionBroker.getActiveUnitOfWork();
return uow;
public Object create(Object o)
UnitOfWork uow = getUnitOfWork();
uow.registerNewObject(o);
// added so that the assigned sequence number will be available before the commit happens
uow.assignSequenceNumber(o);
return o;
}

Doug, Andrei and others
I found the problem. I have a Delegate that provides access to all EJBS. This delegate is used by both the webtier and middle tier.It is written in a generic fashion so that the web server and middle tier does not have to be co-located in one container. getInitialContext() which is implemented as follows:
private static Context getInitialContext() throws NamingException
// Get InitialContext for Embedded OC4J.
// The embedded server must be running for lookups to succeed.
// actual code reads from the external parameters
String contextFactory = "com.evermind.server.rmi.RMIInitialContextFactory";
String principal = "admin";
String passwd = "admin123";
String providerURL = "ormi://localhost:3201/shc";
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, contextFactory);
env.put(Context.SECURITY_PRINCIPAL, principal);
env.put(Context.SECURITY_CREDENTIALS, passwd);
env.put(Context.PROVIDER_URL, providerURL);
env.put("dedicated.rmicontext","true");
return new InitialContext(env);
When the EJB1 tries to look up for EJB2, container thinks that the call is from outside the container and it is starting a new transaction.
When I changed the EJB1 to look up EJB2 to get the context as shown below,every thing seems to rolling back.
private static Context getInitialContext() throws NamingException
return new InitialContext();
Thanks again for pointing me in the right direction.
I will post the same message in other threads.
Raju

TransactionAttribute REQUIRED automatically rolls back on a RuntimeExceptio

Similar Messages

Maybe you are looking for