Transactions report "Could not connect to daemon"

Currently evaluationg ZLM 66, and am running into a problem with
transactions. All appropriate modules are installed on client, and rcd is
running correctly (as far as I can tell). Client activated to my ZLM server
just fine, so I know communication from the client to the server is okay.
After my first couple of test transactions to this client failed with the
error "could not connect to daemon", I thought maybe there were some
firewall issues. Completely disabled firewall on the client, and same
results. The ZLM server can ping, ssh, etc to the client, so I know general
network connectivity is good.
ZLM indicates it communicated with the client in between some of my failed
transactions, which makes again makes me think it's not a network
connectivity issue.
Has anyone else seen this problem?

Most likely the rcd deamon on the client server is not running.
I had a simmilar issue- basically I had to restart rcd about seven times
while updating one of my boxes.
/etc/init.d/rcd start solved (well, sort of) my problem. Not very
helpfull unless you are manually updating and constantly whatching the
action.
> Currently evaluationg ZLM 66, and am running into a problem with
> transactions. All appropriate modules are installed on client, and rcd
is
> running correctly (as far as I can tell). Client activated to my ZLM
server
> just fine, so I know communication from the client to the server is
okay.
>
> After my first couple of test transactions to this client failed with the
> error "could not connect to daemon", I thought maybe there were some
> firewall issues. Completely disabled firewall on the client, and same
> results. The ZLM server can ping, ssh, etc to the client, so I know
general
> network connectivity is good.
>
> ZLM indicates it communicated with the client in between some of my
failed
> transactions, which makes again makes me think it's not a network
> connectivity issue.
>
> Has anyone else seen this problem?
>
>

Similar Messages

  • Running transactional replication on SQL server 2008R2 but: "The process could not connect to subscriber 'SERVER NAME'"

    I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
    replication doesn't take place.
    When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
    Clicking on start, this is the error message I get:
    The agent could not be started.
    Additional information:
    An exception while executing a Transact-SQL statement or batch.
    SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
    Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
    What can i do?
    Please help me.Thanks

    The error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
    If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
    If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
    The permissions required are covered in
    Replication Agent Security Model.
    If you have anymore questions, please let me know.  I hope this helps.
    Brandon Williams (blog |
    linkedin)

  • I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    I've lost my iPhone5 like 40 hours ago. I already turned the Lost mode on with Find my iphone app. But my phone has no data plan so it could not connect to the internet at all. I reported to the police, too. What else can I do? Can anybody advise?

    No...see the link I posted:
    If you did not enable Find My iPhone on your missing device
    If you did not enable Find My iPhone before it was lost or stolen, you can't use it to locate or protect your device, but you can still follow these steps:
    Change your iCloud password to ensure that no one else can use your device to delete or make changes to your iCloud data.
    Report your lost or stolen device to local law enforcement and your wireless carrier. Apple doesn't track or flag lost or stolen products, but you can use My Support Profile (supportprofile.apple.com) to find a list of serial numbers for products that you've purchased or registered with your Apple ID.

  • Could not connect to the report server

    I have created  SSRS reports using sql server 2012, those are works well but when i deploy the solution that time i get an error 
    "Could not connect to the report server http://myservername/ReportServer.
    Verify that the TargetServerURL is valid and that you have the correct  permission to connect to the report server.
    Please suggest me how to resolve this issue i lost more time on this problem.
    Thank You.

    Hi Anil,
    As JJordheim posted earlier, if we have no permission to perform the action we may get the similar issue.
    If the issue is persist, the issue may be due to User Account Control (UAC). There is a similar issue, please refer to it.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/24011d1c-e61f-4f47-b037-1056c29bef4a/could-not-connect-to-the-report-server-httplocalhost8080reportserver-verify-that-the?forum=sqlreportingservices 
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • My ITunes works perfectly except for the ITunes Store which gives me the following message "I Tunes could not connect to the I Tunes Store. An unknown error ocurred (-3221)

    Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
    Make sure your network connection is active and try again.
    But my network connection is active.
    Help!

    Hi davwatto thanks for taking the time to reply.
    ok, so tried to open my safari which was version 5.1.7 and i received the error message:
    safari can't connect to the server
    safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
    The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
    The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
    Safari can’t open the page.
    Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
    Not sure how to check the logs for itunes though
    If you have any idea how to fix this issue that would be great as im at a total loss.
    Thanks

  • "iTunes could not connect to the Music Store" Error Message

    Hello all,
    I finally got my script running correctly and I can see the front page of my iTunesU site(Yay!). But I am getting an irritating error message, and what is unusual are the circumstances under which I see the error message and the circumstances under which I do NOT see the error message. Allow me to elaborate.
    Scenario #1
    I have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as the "Music Store" page on iTunes gives way to the front page of my iTunesU site. Perfection! This is the behavior I want!
    Scenario #2
    I DO NOT have iTunes open on my computer. I go to the login page I created on my school's website and login. I watch as iTunes begins to open and then spits out this error message:
    "iTunes could not connect to the Music Store. An unknown error occurred. Make sure your network connection is active and try again."
    There is also an error number attached to the error message but it changes from time to time with no explanation. Here is the strange part. If I just hit "OK" on the error message my iTunesU site opens fine.
    I've tried this on my home and work computers and a friend's computer and the behavior is the same. Moreover I surfed over to the Stanford iTunesU login page: http://itunes.stanford.edu/ and I get the same behavior(which pretty much rules out in my mind that it is a problem with my script).
    I guess it isn't a huge deal. Worse comes to worse we can tell the students and faculty, if you see an error message from iTunes just hit "OK". But I'm rolling out this slick new iTunesU site and this error message is like a scratch in the paint job. Plus my boss is looking over my shoulder like "what's that error?" and it is starting to detract from the computer whiz kid image I've worked so hard to cultivate
    My possible suspects are:
    iTunes - (Went over to the iTunes discussion board and a lot of people report similar error messages when trying to get into the Music Store but I couldn't find anyone who said hitting "OK" made it possible to proceed)
    My script -(seems unlikely since Stanford has the same problem)
    The configuration on the computers I've tested it on - (But I've tested it on three different computers!)
    iTunesU - If this is the problem I'm hoping you people can help me.
    So has anyone else experienced this?
    Try to login into your iTunesU page with and without iTunes already open. See any error messages or weird behavior?
    Try the same thing on Stanford's site: http://itunes.stanford.edu/
    If you can repeat my result then post it here so Apple will know this is an issue. If you can't repeat my result then post it here so that I might know I need to look elsewhere for the problem.
    Thank you for your kind attention.

    I'm seeing this error on some, but not all, of my Windows XP machines. On my personal development XP box, I see this error if iTunes is closed when I try and access iTunes U via my transfer script or Stanford's.
    "iTunes could not connect to the Music Store. The network connection was terminated unexpectedly. Make sure your network connection is active and try again."
    The errors occured in IE 7 Beta, Firefox 1.5.x, and Firefox 2 Beta. In each case, iTunes U loaded after I clicked the 'ok' button in iTunes. I did notice that in Firefox's case an additional pop-up window appeared that asked whether or not I had iTunes; when I selected that I do have itunes, it transfered me to iTunes but generated the error.
    After getting these errors on my Windows XP machine, I tried it on two different lab machines running Windows XP, and didn't get the error message once -- I tried it in IE 6, Firefox 1.0.x and Firefox 1.5.x and they all worked. It even worked with IE 7 Beta and Vista Beta.
    Based on this, I think the problem must lie in how Windows registered iTunes, and the handshake just isn't happening properly.
    Ken Newquist
    Lafayette College

  • SFTP receiver error: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE

    Hi,
    When we try to send file over seeburger SFTP (receiver) we are getting the error as below.
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true, >> Description: SFTP transaction error occured.>> Details: putFile: Could not connect to remote host; Reason: Unable to open Sftp client. SshReasonCode: CHANNEL_FAILURE>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMMUNICATION_ERROR>>Retryable: true>>Fatal: true
    But we are able to connect through filezilla . we are able to create and delete file using the same username and password which is being used in SFTP adapter.
    we have imported the both dsa and rsa keys in SFTP partner folder in NWA. Even though we are getting same error.
    Thanks,
    Vinayak

    Hi Ram,
    we checked with network team and port 22 is open and they are able to ping to the target system.
    we checked the seeburger logs and we see EOF received from remote site error:
    Caused by: com.maverick.ssh.SshException: EOF received from remote side [Unknown cause]
    #at com.maverick.ssh2.TransportProtocol.b(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.i(Unknown Source)
    #at com.maverick.ssh2.TransportProtocol.nextMessage(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.d(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter.access$000(Unknown Source)
    #at com.maverick.ssh.message.SshMessageRouter$_b.run(Unknown Source) 
    Thanks,
    Vinayak.

  • I can't connect to the router in my home.  Things were working fine as usual - I attended school and connected to their WiFi network as usual.  When I returned home I could not connect to my own home router.  The Ipad seeks the network but nothing happens

    I can't connect to the router in my home.  The Ipad seeks the network but nothing happens.  I went to school and connected to their WiFi network as usual with no problems.  When I returned home I could not connect to my home router.  The Ipad seeks the router number but nothing happens.  I rebooted the Ipad a few times in the school.  The numbers identifying the router, etc. on my Ipad no longer appear there. 
    TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
    I reset the network settings to the factory defaults but this doesn't fix the problem.
    What can I do to reconnect to my home router?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

  • Could not connect to the OLAP server web analysis hyperion

    I created a document report in Web Analysis with an administrator user then I created a user in the shared services console and granted him access to the report, but entering with this user I can access the report, but receive the following error message: Could not connect to the OLAP server web analysis hyperion.

    Is the user having correct provisioning in Essbase? Which version? (older versions, you'll have to synchronize Essbase with HSS)
    Regards
    Celvin
    http://www.orahyplabs.com

  • "Could not connect to the ConfigMgr site database" problem with SCCM

    The scenario is:
    - SCCM 2007 SP1 installed on one server
    - SQL 2008 installed on the other server
    - Console was also installed on the SCCM server.
    Everything was working just fine for about three months. As of few days ago, out of nowhere, I cannot open the console at all, it gives me this error:
    " The ConfigMgr console could not connect to the ConfigMgr site database. Verify that this computer has network connectivity to the SMS Provider computer and that your user account has Remote Activation permissions on both
    the ConfigMgr site server and SMS Provider computers. For more information, see "How to Configure DCOM Permissions for Configuration Manager Console Connections" in ConfigMgr Help. "
    I confirmed all permissions (DCOM) and group settings (SMS Admin) and everything looks fine. I also noticed one other thing and I have a feeling its related - I log on to SCCM server and then from there I try to start RDP
    connection to SQL server. I can connect, but as soon as I move the mouse or try clicking somewhere it breaks the connection and the "Trying to re-connect" window appears. It can`t establish normal RDP connection. If I try from any other server to SQL, it works
    fine...
    Any suggestions will be appreciated.
    Dino

    looks like I celebrated way too early - after working for about 20 minutes, it started throwing the same error again. Th adminUI log has this entry:
    ===========================================================================================================0
    [3][13.4.2011 13:33:45] :Error returned from WMI Query Engine\r\nMicrosoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException\r\nThe ConfigMgr Provider reported an error connecting to the ConfigMgr site database server. Verify
    that the SQL Server is online and that ConfigMgr site server computer account is an administrator on the ConfigMgr site database server.\r\n   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryProcessor.ProcessQueryWorker(AsyncOperationDatabase asyncData)
       at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
       at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)\r\nConfigMgr Error Object:
    instance of SMS_ExtendedStatus
        CauseInfo = "";
        Description = "Unable to get SQL connection.";
        ErrorCode = 3242263810;
        File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspobjectquery.cpp";
        Line = 1861;
        Operation = "ExecQuery";
        ParameterInfo = "select * from SMS_ConfigurationBaselineInfo where UPPER(CI_UniqueID) NOT IN (SELECT UPPER(InstanceKey) FROM SMS_ObjectContainerItem WHERE ObjectType=2011) ORDER BY LocalizedDisplayName";
        ProviderName = "WinMgmt";
        SQLMessage = "[08S01][11][Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.";
        SQLSeverity = 0;
        SQLStatus = 11;
        StatusCode = 2147749889;
    Unable to get SQL connection.
    \r\nSystem.Management.ManagementException\r\nGeneric failure \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
       at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
       at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryResultsObject.<GetEnumerator>d__0.MoveNext()\r\nManagementException details:
    instance of SMS_ExtendedStatus
        CauseInfo = "";
        Description = "Unable to get SQL connection.";
        ErrorCode = 3242263810;
        File = "e:\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\sspobjectquery.cpp";
        Line = 1861;
        Operation = "ExecQuery";
        ParameterInfo = "select * from SMS_ConfigurationBaselineInfo where UPPER(CI_UniqueID) NOT IN (SELECT UPPER(InstanceKey) FROM SMS_ObjectContainerItem WHERE ObjectType=2011) ORDER BY LocalizedDisplayName";
        ProviderName = "WinMgmt";
        SQLMessage = "[08S01][11][Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.";
        SQLSeverity = 0;
        SQLStatus = 11;
        StatusCode = 2147749889;
    \r\n
    ====================================================================================================
    As I mentioned in my first post, the RDP from SCCM to SQL servers is not working and I think that is related to my problem....suggestions?

  • Random Bingads WSDL errors: Parsing WSDL: Couldn't load from...failed to load external entity, Could not connect to host, Parsing Schema: can't import schema from

    Hi,
    I am developing a web tool that accesses client's Bingads accounts via OAUTH2 granting. I am downloading data from clients daily.
    Generally it worked, but for 2 days I am experiencing a weird issue, that in random times (but more and more often though) I receive random error messages from Bing server. I am pasting below a few example from my logs (with timestamp and request/response).
    Must note that I launch these requests from the server where we have the webapp but also I launch it locally. The same is the result.
    The timestamp is in France time (GMT+1).
    Thanks ahead!
    Best regards,
    Steve
    2015-01-14 15:08:05: Service\BingAds::initService => SOAP-ERROR: Parsing Schema: can't import schema from 'https://reporting.api.bingads.microsoft.com/Api/Advertiser/Reporting/V9/ReportingService.svc?xsd=xsd0'
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetDetailedBulkDownloadStatusRequest><ns1:RequestId>108277125</ns1:RequestId></ns1:GetDetailedBulkDownloadStatusRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetDetailedBulkDownloadStatusResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Errors i:nil="true" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><ForwardCompatibilityMap xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic"
    xmlns:i="http://www.w3.org/2001/XMLSchema-instance"/><PercentComplete>100</PercentComplete><RequestStatus>Completed</RequestStatus><ResultFileUrl>https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=XXX</ResultFileUrl></GetDetailedBulkDownloadStatusResponse></s:Body></s:Envelope>
    2015-01-15 05:41:39: Service\BingAds::getCampaigns => SoapFault: Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 05:45:00: Service\BingAds::initService => SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    2015-01-15 11:58:46: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)
    2015-01-15 11:59:50: Service\BingAds::initService =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    SOAP-ERROR: Parsing WSDL: Couldn't load from 'https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl' : failed to load external entity "https://api.bingads.microsoft.com/Api/Advertiser/CampaignManagement/v9/CampaignManagementService.svc?singleWsdl"
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"><s:Header><h:TrackingId xmlns:h="https://bingads.microsoft.com/CampaignManagement/v9">XXXXX</h:TrackingId></s:Header><s:Body><GetCampaignsByAccountIdResponse
    xmlns="https://bingads.microsoft.com/CampaignManagement/v9"><Campaigns xmlns:i="http://www.w3.org/2001/XMLSchema-instance"></Campaign>........</Campaigns></GetCampaignsByAccountIdResponse></s:Body></s:Envelope>
    2015-01-15 12:05:55: Service\BingAds::getCampaigns =>
    ---------Soap Fault:--------------------------------------------
    SoapFault catched:
    Could not connect to host
    ---------Soap Request:--------------------------------------------
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="https://bingads.microsoft.com/CampaignManagement/v9"><SOAP-ENV:Header><ns1:CustomerAccountId>XXXXX</ns1:CustomerAccountId><ns1:CustomerId/><ns1:DeveloperToken>XXXXX</ns1:DeveloperToken><ns1:UserName/><ns1:Password/><ns1:AuthenticationToken>XXXXXX</ns1:AuthenticationToken></SOAP-ENV:Header><SOAP-ENV:Body><ns1:GetCampaignsByAccountIdRequest><ns1:AccountId>XXXXX</ns1:AccountId></ns1:GetCampaignsByAccountIdRequest></SOAP-ENV:Body></SOAP-ENV:Envelope>
    ---------Response:------------------------------------------------
    (empty response logged)

    Hi,
    1. I am using the older version of the PHP library provided by Bing (updated on 1/20/2014), so that is doing the WSDL loadings. I initialize the proxy calling OpticoBingAdsClientProxy providing what it needs, and then do the requests.
    2. I have a cron that reads data from client's accounts. I make several calls, like get search query report, get keyword performance report, get keyword bulk data. As the script progressed the first 2 worked and the third gave error. Or in other cases the
    first request failed. The calls have quite some time in between them since I process data (sometimes even 160 seconds)
    3. I did not change the code ion terms of requests, since as I said I use the PHP library (same credentials, ...).
    As of today (2015-01-16 10:30 GMT + 2) running my script, still have the same issues.
    Thank you!
    Steve

  • Help - LCM Utility Error - Could not connect to source - Null

    Has anyone successfully used LCM to extract BI+ objects to files under 9.3.1?
    I've configured it as per the doc, and it seems to connect to HSS Ok, but fails to connect to BI+ even though I've used the Project name and App ID as shown in Shared Services.
    Attempting to load Log Config File:../conf/log.xml
    main 2009-01-16 11:49:11,823 INFO - ----------- Package file info -------
    main 2009-01-16 11:49:11,839 INFO - Package File Path = W:\Hyperion\common\utilities\LCM\9.3.1\doc\
    Test_ExportPackage.xml
    main 2009-01-16 11:49:20,948 INFO - --------Application Details:---------
    main 2009-01-16 11:49:20,948 INFO - Application Name: Hyperion System 9 BI+:xxxwebdev.pcdir.int.xxx:6800::1
    main 2009-01-16 11:49:20,948 INFO - Application ID: 00000115dc60f0fe-0001-09bc-0a0401e0
    main 2009-01-16 11:49:20,948 INFO - Plugin Type: java
    main 2009-01-16 11:49:20,948 INFO - CallBackURL: xxxwebdev.pcdir.int.xxx:6800
    main 2009-01-16 11:49:20,948 INFO - Product Name: HAVA-9.3.1
    main 2009-01-16 11:49:20,948 INFO - Product Code: HAVA
    main 2009-01-16 11:49:20,948 INFO - Project Name: Hyperion System 9 BI+
    main 2009-01-16 11:49:20,964 INFO - Plugin Class: com.hyperion.expimp.ExportImportManager
    main 2009-01-16 11:49:20,964 INFO - ----------------------------------------------
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    Current date is - Fri Jan 16 11:49:21 GMT 2009
    java.lang.ClassNotFoundException: com.hyperion.expimp.ExportImportManager
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at com.hyperion.lcm.common.manager.ManagerFactory.getManager(Unknown Source)
    at com.hyperion.lcm.handler.util.Migration.getManager(Unknown Source)
    at com.hyperion.lcm.handler.ArtifactHandler.execute(Unknown Source)
    at com.hyperion.lcm.handler.TaskHandler.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Thread-6 2009-01-16 11:49:21,339 ERROR - Could not connect to Source - null
    Thread-6 2009-01-16 11:49:21,401 WARN - Task 1 in package file does not have a valid source manager
    Thread-6 2009-01-16 11:49:21,401 ERROR - There are errors in task 1
    Thread-6 2009-01-16 11:49:21,495 INFO - Migration(s) Completed Successfully.
    the Package Definition is...
    <?xml version="1.0" encoding="UTF-8"?>
    <!-- edited with XMLSPY v5 rel. 4 U (http://www.xmlspy.com) by Dongling Ding (Hyperion) --><Package name="" description="" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
         <Credentials user="admin" password="{CSS}gEyoY7EyW6cugoKczYohhQ=="/>
         <Connections>
              <ConnectionInfo name="MyHSS"
                   type="HSS"
                   description="Hyperion Shared Service connection"
                   url="http://xxxwebdev:58080/interop"
              />
              <ConnectionInfo name="FS"
                   type="FileSystem"
                   description="File System Location"
                   filePath="file:/c:/LCM/ExportedOutput"
              />
              <ConnectionInfo name="BI"
                   type="Application"
                   product="HAVA"
                   description="BI Plus Dev"
                   HSSConnection="MyHSS"
                   project="Hyperion System 9 BI+"
                   application="Hyperion System 9 BI+:xxxwebdev.pcdir.int.xxx:6800::1"
              />
         </Connections>
         <Tasks>
              <Task seqID="1">
                   <Source connection="BI">
                        <!-- the options listed would match some option specified in product registration -->
                        <Options>
                             <!-- Set to "true" if Job Outputs should be exported alone with the job -->
         <optionInfo name="exportJobOutput" value="true"/>
    </Options>
                   <!-- Following demonstrates retrieving the objects using the filtering by type -->
              <Artifact parentPath="/Repository Objects" type="folder" recursive="true" pattern="*"/>
              <Artifact parentPath="/Repository Objects" type="application/x-brioquery" recursive="true" pattern="*"/>
              <Artifact parentPath="/Repository Objects" type="application/x-SQR" recursive="true" pattern="*"/>
              <Artifact parentPath="/Repository Objects" type="application/hyperion-analyzer-report" recursive="true" pattern="*"/>
              <Artifact parentPath="/Repository Objects" type="application/hyperion-reports-report" recursive="true" pattern="*"/>
              <!-- Non-repository objects -->
                        <Artifact parentPath="/Product Preferences" recursive="true" pattern="*"/>
                        <Artifact parentPath="/Schedule Objects" recursive="true" pattern="*"/>
                        <Artifact parentPath="/Physical Resources" recursive="true" pattern="*"/>
                        <Artifact parentPath="/Security" recursive="true" pattern="*"/>
                   </Source>
                   <Target connection="FS">
                        <Options>
                        </Options>
                        <Transforms>
                        </Transforms>
                   </Target>
              </Task>
         </Tasks>
    </Package>
    Any advice would be great.
    Dave.
    Edited by: djhogg on 16-Jan-2009 04:22

    Soban,
    I was with the same problem and it worked using LCMUtility in BIPlus\bin directory.
    Thanks !
    Raphael
    Edited by: user4506039 on 11/05/2009 11:10

  • Tns error could not connect to database but can tnsping and sqlplus

    The new install OBIEE 10.1.3.4.1, with two Linux RH/64 Bit servers set up and running, but can't get to 11g database when running reports.
    Error: nqsError 17001 Oracle Error Code 12154, message ORA-12154: TNS could not resolve the connect identifier specified at OCI call OCIServerAttach. nQSError 17014 could not connect to Oracle database
    Server 1 BI Server
    BI server is running.
    oc4j is running.
    jdk is installed
    /setup/user.sh variables and libs set
    .bash_profile variables and libs set
    oracle client installed with lib32
    can tnsping the database from here using SID
    can sqplus login to the database from here
    changed connection pool offiline and uploaded new .rpd
    this script does not work /setup . sa-cli.sh to test client, nothing happens, also unable to connect to BI Server in online mode from Windows client 32bit.
    Server 2 Presentation Server
    saw server is running
    set odbc AnalyticsWeb DSN to point to BI Server 1
    Since I can ping and connect with tns, why is presentation server throwing errors?
    Thanks for the help

    Copy the tnsname.ora file from Oracle Database serve onto the client PC.
    Path: %Oracle_home%\net80\admin\
    Send me a mail if there is any other issues
    Regards
    Oluseyi Funmi Oduberu
    Oracle Consultant
    Email:[email protected]
    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

  • Error :Could not connect to SAP systemSAP_R3_PLM

    Hi,
    I have uploaded the Business Package for projects into portal and assigned the iviews to a user(test_abc)...when iam trying to view the iviews by logging in to "test_abc" iam getting the following error:
    <b>Could not connect to SAP systemSAP_R3_PLM</b>
    Our Portal is only connected to SAP BW system...Not R/3..
    Could any one please tell me whether we need to coonect to R/3 system to use this business packages?
    also there are some iviews like "BW reports","Select a BW report" etc....
    to use the above iviews do we require an R/3 system or Bw system....what is the data source for this iviews.?..iam confused ....Could some one help me on this issue?
    Regards,
    P.Navakanth

    The primary backend system for this package is indeed an 'R/3' system.  Other systems it used  (depending on which iViews you wish to use) are BW and CRM.  For exact versions of these systems which are supported please follow the link below:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/40171ac2-a86d-2910-8692-ece21472e097
    Please reward points if this helped  Thanks

Maybe you are looking for

  • ERROR - disk could not be read or written to

    I have reinstall software, updated IPOD to 2006 software, restored Ipod shuffle and when I try and Autofill using my own list of songs I get this message: The Ipod cannot be updated. The disk could not be read from or written to.

  • Wireless Mouse and Keyboard Install Problem

    I am trying to install my wireless keyboard and mouse onto my Mac OS X 10.3.9. My dad had this computer before me and had the mouse and keyboard paired and working. After it was shipped to me, I attempted to pair these again with no luck. THe bluetoo

  • Duplicate photos now in Photo from iPhoto

    Hi, I uploaded photos from my Mac to my iPad(3) using Photosync. The album appears nicely under Albums in the Photo app along with the pics in Camera Roll. I then make my edits in iPhoto (latest relase). So then, in iPhoto, i have the pics with the l

  • CCPConfig.XML File missing

    When building a package for MacOS the package builds successfully but upon launch I receive an error that the pacakge could not be installed. After checking the PDApp.log file I found the following error: ERROR invalid xml file path. Could not read d

  • Workitem and Agent assignment

    Hello, Well, I have critical requirement. My requirement is, there is an activity USER DECISION in a workflow. Now, that activity has a standard task automatically assigned to it. That standard is of type general task. The activity has a role assigne