Transalate JPQL query to be SQL

I'm using toplink. I wonder if there is tool to translate toplink JPQL query to be SQL in developer? what I'm looking for is I can type in a JPQL query, IDE will be able to show me the translated SQL. is this can be done in jdeveloper?
Thanks

Dear Friends,
I have done the same thing. We r using PI 7.1.
I have Sync Proxy -> Syn JDBC . I tried to execute a simple query at the JDBC adapter by sending it through *access* field in the XML structure.
This is the input
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm">
- <stmt>
- <TABLENAME action="SQL_QUERY">
<access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index <>7 and rownum<5</access>
</TABLENAME>
</stmt>
</ns0:CoilNoReceive>
I am getting this error msg..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error 'java.sql.SQLException: ORA-00900: invalid SQL statement ' executing service raw2sql with SQL statement '<?xml version="1.0" encoding="UTF-8"?> <ns0:CoilNoReceive xmlns:ns0="urn:essar-com:production:shearslitpoconfirm"><stmt><TABLENAME action="SQL_QUERY"><access>SELECT coil_no,PARTS_ACT FROM P_INV where fac_index <> 6 and fac_index<>7 and rownum<5</access></TABLENAME></stmt></ns0:CoilNoReceive>'</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the problem. Reply ASAP.
Thanks
K. Ramesh

Similar Messages

JPQL Query for specific usecase, help needed

Does anyone knows how to write the JPQL query for this specific use case.
Take 3 tables,
Table 1 contains bids for many auctions (Bid table)
Table 2 Contains many auctions (Auction Table)
Table 3 contains many users (User Table)
I need a query to retrieve all the highest bids per auction for a particular user.
For example if the user has bidded on 10 auctions., but for each auctions has placed 3 bids each. Following the query, I would expect to get 10 bids back, each being the highest per auction.
A Bid has a bid value that can be used for filtering.
Thanks
Peter

It would be something like the JPQL version of 'select * from bids join auctions using (auction_id) where bids.userid = ? group by auctions.auction_id order by bids.amount desc'. But this is primarily an SQL question, and only secondarily a question as to how to translate that into JPQL, which should be straightforward.

Query help in sql commands

using apex 4.1 i'm entering the following query in the sql command window and I keep getting a pop-up for Entering Bind Variable. I'm not using bind variables though, anyone else see this issue before?
SELECT A.FIRST,A.LAST,A.COMPANY AS CNAME,
J.TOT_MAN_HOURS,
J.ACREAGE,
W.NUM_WORKERS,
W.START_DT
FROM EW_ACCOUNTS A, EW_WORK_ORDER W, EW_JOBS J
WHERE A.ID = J.ACCT_ID
AND J.JOB_ID = W.JOB_ID
AND W.START_DT >= SYSDATE
AND W.START_DT < SYSDATE+1
ORDER BY W.START_DT

I tried that and it didn't seem to help either.
Funny though, if I write a new query against just one of the tables and write out each column name. it works. If I use the * instead of writing each column name, I have the same issue.
This is in apex.appshosting.com free demo environment. I sent them an email asking about it and they told me it was a code issue and they don't support the demo environment.

Query in pl/sql oracle

Hi All!
I want to write following type of query in PL/SQL
How can I write one which will work.

SELECT count(1) INTO v_count2 from TRJ_TRAN_REJ_T a and PEU_PUR_ENRL_UNT_T b
where a.TRJ_CVRG_PER_DATE IN (b.PEU_EFF_DATE AND b.PEU_END_DATE) AND
a.purik = b.purik AND a.peuik = b.peuik

Above query is not working correctly. Any changes?? DATE stored in database is like 01/01/2001
v_count2 is NUMBER variable declared in PL?SQL.
SA

You don't need to use a PL/SQL, a simple SQL will suffice. I guess you could write it as a function?
I think your SQL was wrong so I took the liberty of fixing it for you. You seperate tables with commas in a FROM clause, not AND.
Anyway, on the lines of a SQL Statement you can do the following.
SELECT count(1) AS mycount
FROM TRJ_TRAN_REJ_T a,
 PEU_PUR_ENRL_UNT_T b
WHERE a.TRJ_CVRG_PER_DATE IN (b.PEU_EFF_DATE AND b.PEU_END_DATE)
AND a.purik = b.purik
AND a.peuik = b.peuik
Connection conn = DriverManager.getConnection(URL, username, password);
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery( your sql);
while ( rs.next() )
 int mycount = rs.getInt("mycount");
close stuff down here

Query in PL/SQL Help

Hi All!
I want to write following type of query in PL/SQL
How can I write one which will work.
SELECT count(1) INTO v_count2 from TRJ_TRAN_REJ_T a and PEU_PUR_ENRL_UNT_T b
where a.TRJ_CVRG_PER_DATE IN (b.PEU_EFF_DATE AND b.PEU_END_DATE) AND
a.purik = b.purik AND a.peuik = b.peuik
Above query is not working correctly. Any changes?? DATE stored in database is like 01/01/2001
v_count2 is NUMBER variable declared in PL?SQL.
SA

I'd also watch out for the TIME part of the date matching, best to do a TRUNC on them, but make sure also [purik] and [peuik] are indexed. This is the format I use for a select. Some parts were removed but you get the idea.
--[START]
--[SELECT]
SELECT
--/*+ choose */
/*+ RULE */
--/*+ first_rows */
--/*+ all_rows */
count(1) --[C1]
--[INTO]
INTO
v_count2 --[V1]
--[FROM]
FROM
trj_tran_rej_t T1,
peu_pur_enrl_unt_t T2
--[WHERE]
WHERE
TRUNC(T1.trj_cvrg_per_date) = TRUNC(T2.peu_eff_date)
OR
TRUNC(T1.trj_cvrg_per_date) = TRUNC(T2.peu_end_date)
AND
T1.purik = T2.purik
AND
T1.peuik = T2.peuik
--[ABORT]
AND 1=1;
--[END]
Tyler Durden

Wrong query in pl/sql

Good Morning,
i have a string containing a query in pl/sql :
description varchar2(100) := 'select adeia_id||description,adeia_id from mis_adeia where plafon=1';
which selects adeia_id and description fron a table and displays them together, but i want to seperate adeia_id and description with a blank or a dot, so i change the string and make it like:
description varchar2(100) := 'select adeia_id||' || ' ' || 'description,adeia_id from mis_adeia where plafon=1';
am i doing something wrong?
thanks for reading.

thank you peter but it doesn't work. i tried it. the string i pass it as argument in the create_group_from_query function in forms builder, and when i use double quots it gives me the error, that cannot create the group! i don't know what is the fault.

Query in PL/SQL code is slower

I have a very strange issue within my development database, I'm using Oracle 10g.
I created a query to read some data from a large collection of tables -OFDM tables- I have tested and tuned the performance of the query from (PL/SQL Developer 7 ), it takes only 2 minutes to finish but when I use the same query as a cursor in a database procedure it consume a lot of time around 15 min to get the data.
Your help is appreciated

[url http://groups.google.de/group/comp.databases.oracle.server/browse_frm/thread/df893cf9be9b2451/54f9cf0e937d7158?hl=de&tvc=1&q=%22Beautified%22+code+runs+slower#54f9cf0e937d7158]Recently somebody complained about slow performance after code was beatified in PL SQL Developer, after recompilation without flag "Add Debug Information" it run faster...
(just a guess)
Best regards
Maxim

Re: How to converting from PL/SQL query to T-SQL query

How to converting from PL/SQL query to T-SQL query... Its Urgent

Download the
SQL Server Migration Assistant for Oracle. It will convert whole Oracle databases, or single queries or PL/SQL stored procedures.
With caution that If your database is using Collation which is case sensitive SSMA will not work.SSMA doesnt guarantees 100% for conversion of Queries/stored proc /database if it fails to do so for some queries you will have to do it manually.
But you can try
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Data discrepancy between Webi Report and same Query fired on SQL Server 2k5

Hi ,
We are facing an issue in BO XI R2.
We need to run a Webi report in which negative values for forecasting data for year 2011 and 2012 should be displayed.
When we are running this report for negative values, we are getting message u2018There is no data corresponding to this queryu2019.
Then we tried executing the same query on Database. Here at db level we got the correct required result.
So now we are not able to find the reason for data discrepancy .
Why the same query generated by Webi is providing correct data when fired on reporting database and not when running the Webi Report.
Checklist we have gone through for this troubleshooting is-
-Connections of Universe (Is universe pointing to same database or not)
-Any filter condition present at universe level and at report level.
Could anyone please help on this.
Regards,
Vaibhav

Vaibhav,
Have you tried the following when you are in WebI: go under the Edit Query panel, click on the "SQL" icon, and review the query that is getting generated? At this point you can also click on the "copy" option, then paste this query into your SQL application analyzer and run to see what results are generated. To me, it sounds like the portion trying to generate the "minus" sign might be getting tripped up causing the disconnect....
Thanks,
John

Crosstab query using pure SQL only

Hi all,
Found a lot of threads on crosstab, but none seems to address what I need. I need to perform crosstab query using pure SQL only & the number of columns are dynamic. From a query, I obtained the below table:
Name Date Amount
Alex 2005-06-10 1000
Alex 2005-06-20 1000
Alex 2005-07-10 1000
Alex 2005-07-20 1000
Alex 2005-08-10 1000
Alex 2005-08-20 1000
John 2005-06-10 2000
John 2005-06-20 2000
John 2005-07-10 2000
John 2005-07-20 2000
John 2005-08-10 2000
John 2005-08-20 2000
And I need to transform it into:
Name 06-2005 07-2005 08-2005
Alex 2000 2000 2000
John 4000 4000 4000
Reason for the columns being dynamic is because they'll be a limit on the date ranges to select the data from. I'd have a lower & upper bound date say June-2005 to August-2005, which explains how I got the data from the above table.
Please advise.
Thanks!

Hi,
I couldn't resist the intellectual challenge of a pure SQL solution for a pivot table with a dynamic number of columns. As Laurent pointed out, a SQL query can only have a fixed number of columns. You can fake a dynamic number of columns, though, by selecting a single column containing data at fixed positions.
 
 
If it were me, I'd use a PL/SQL solution, but if you must have a pure SQL solution, here is an admittedly gruesome one. It shows the sum of all EMP salaries per department over a date range defined by start and end date parameters (which I've hardcoded for simplicity). Perhaps some of the techniques demonstrated may help you in your situation.
 
 
set echo off
set heading on
set linesize 100
 
select version from v$instance ;
 
set heading off
 
column sort_order noprint
column sal_sums format a80
 
select -- header row
1 as sort_order,
'DEPTNO' as DEPTNO ,
sys_connect_by_path
 ( rpad
 ( to_char(month_column),
 10
 ' | '
 ) as sal_sums
from
 select
 add_months( first_month, level - 1 ) as month_column
 from
 ( select
 date '1981-01-01' as first_month,
 date '1981-03-01' as last_month,
 months_between( date '1981-03-01', date '1981-01-01' ) + 1 total_months
 from dual
 connect by level < total_months + 1
) months
where
connect_by_isleaf = 1
connect by
month_column = add_months( prior month_column, 1 )
start with
month_column = date '1981-01-01'
union all
select -- data rows
2 as sort_order,
deptno,
sys_connect_by_path( sum_sal, ' | ' ) sal_sums
from
select
 dept_months.deptno,
 dept_months.month_column,
 rpad( to_char( nvl( sum( emp.sal ), 0 ) ), 10 ) sum_sal
from
 select
 dept.deptno,
 reporting_months.month_column
 from
 dept,
 ( select
 add_months( first_month, level - 1 ) as month_column
 from
 ( select
 date '1981-01-01' as first_month,
 date '1981-03-01' as last_month,
 months_between( date '1981-03-01', date '1981-01-01' ) + 1 total_months
 from
 dual
 connect by level < total_months + 1
 ) reporting_months
 ) dept_months,
 emp
where
 dept_months.deptno = emp.deptno (+) and
 dept_months.month_column = trunc( emp.hiredate (+), 'MONTH' )
group by
 dept_months.deptno,
 dept_months.month_column
) dept_months_sal
where
month_column = date '1981-03-01'
connect by
deptno = prior deptno and
month_column = add_months( prior month_column, 1 )
start with
month_column = date '1981-01-01'
order by
1, 2
 
VERSION
10.1.0.3.0
 
DEPTNO | 81-01-01 | 81-02-01 | 81-03-01
10 | 0 | 0 | 0
20 | 0 | 0 | 0
30 | 0 | 2850 | 0
40 | 0 | 0 | 0
 
Now, if we substitute '1981-03-01' with '1981-06-01', we see 7 columns instead of 4
 
DEPTNO | 81-01-01 | 81-02-01 | 81-03-01 | 81-04-01 | 81-05-01 | 81-06-01
10 | 0 | 0 | 0 | 0 | 0 | 2450
20 | 0 | 0 | 0 | 2975 | 0 | 0
30 | 0 | 2850 | 0 | 0 | 2850 | 0
40 | 0 | 0 | 0 | 0 | 0 | 0
 To understand the solution, start by running the innermost subquery by itself and then work your way outward.

Edit query results in SQL worksheet

I can't edit query results in SQL worksheet, I not found any options to "ON" this. I use SQL Developer 2.1.1.64.

You can't edit results in the worksheet. It's an accepted feature request with no scheduled date. In the mean time you have to go to the table or write an update statement.

NVARCHAR (MAX) TO PRINT DYNAMIC SQL QUERY TO A SQL FILE

Hi
I have a requirement where i need to write an SP which would construct a huge query using dynamic SQL and save the Dynamic query to a file.
The Dynamic SQL Variable I am using as @NVARCHAR(MAX) but since the query being built is large (>4000 characters), I am not able to select it into a table. PRINT @SQL prints the whole query but SELECT @SQL prints only upto 4000 characterrs.
And I need to save this huge dynamix sql to a file using the SP.
Any thoughts as to how i can achieve this?
Rajiv

This is a know problem with dynamic SQL nvarchar(max) concatenation.
See below for correct assembly of large SQL strings:
CREATE table #temp(qry nvarchar(max));
declare @cmd nvarchar(max);
SELECT @cmd=CONCAT(CONVERT(nvarchar(max),N'SELECT '),
CONVERT(nvarchar(max),REPLICATE (N'A',4000)),
CONVERT(nvarchar(max),REPLICATE (N'A',4000)),
CONVERT(nvarchar(max),REPLICATE (N'A',4000)),
CONVERT(nvarchar(max),REPLICATE (N'A',4000)),
CONVERT(nvarchar(max),N'FROM SYS.TABLES'));
insert into #temp SELECT @cmd;
select * from #temp;
select len(qry), datalength(qry) from #temp;
-- 16022 32044
drop table #temp;
Dynamic SQL: http://www.sqlusa.com/bestpractices/dynamicsql/
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Visual query builder in SQL developer ...

hi
Thank you for reading my post
when we can expect a visual query builder in sql Developer ?
also , how i can make an auto increment field in SQL develoepr ?
Thanks

I can't answer your first question.. but the second has been hashed over a few times. In short, there are no auto-increment fields in Oracle. Instead there are sequences which are more complicated to use, but much more versitile.
Auto increment trigger
Auto Increment
Eric

How to see generated SQL when execute JPQL query using entity manager?

I want to see generated SQL query in console or in a log file. How do I do that?
I'm using GlassFish if it matters

If you want to see SQL query that is generated from JPQL in GlassFish console you should do following:
Log on admin console.
Select 'Application Server' from tree, then select Logging tab and Log Levels sub-tab.
Log level for 'Persistence' must be set to FINE or level with more verbosity.

Can not query PQH_BUDGET_DETAILS in SQL*Plus

Hi!
I can see the Positions in the Forms-Mask within EBS.
I want to write a concurrent Programm which queries some data form the positions-table.
If i klick on "Help > Diagnostics > Examine" and select "system.last_query" i can see, that the data comes from a view called: "PQH_POS_BUDGETS_V".
But if i try to query this view in SQL*Plus, it is empty.
So i had a look at how this view is build, and i found, that the base tables should be PQH_BUDGETS and PQH_BUDGET_DETAILS.
How can i query the position_id in PQH_BUDGET_DETAILS in a concurrent program or an self-writen BI Publisher Report?
If i try to query in SQL*Plus it's empty.
Who can help me with this issue?
Thank you for your help!
Best regards,
Thomas

Hi!
Thats great!
Thank you very much!
Best regards,
Thomas

Transalate JPQL query to be SQL

Similar Messages

Maybe you are looking for