Transation type group replication

hi
experts
We are on CRM 4.0, E-commerce, ICSS
1.Do we need to replicate Transaction type group created in IMG for ICSS B2B?
If it is to be replicated manually can u please suggest me the process steps
2.Even we need to replicate the Product Catalog
We have tried to assign Transaction type group in Transactions tab of B2B Web shop
but we are unable to find our transaction type group created in IMG
please suggest us further
Your help will be highly appreciated
thanks
and regards
venugopalrao

Hi Venugopal,
Please find below my answers to your queries.
1. What do you mean by Replication of the Transaction Type Group? Replication to ECC / R/3 or TREX?
I guess you are maintaining the transactions in the transaction type group in shopadmin. It is necessary, but not mandatory to maintain the transaction type group here.
2. So, what is the problem in replicating the Product Catalog? If you have any specific error that you receive, then please mention the same, else please go through the C14 Internet Sales document for details on Product Catalog replication.
In Transactions, you will only your transaction type, not the transaction type group. Here, select your transaction type and assign the same here.
Thanks & Regards,
Nelson

Similar Messages

Types of replications in oracle 10g

Hi
Iam new to oracle10g.
I want to replicate my database.
Before that i want to know how many types of replication methods are available in oracle 10g?
Thanks

There is no single correct answer to that question.
You've certainly got Streams and materialized views. You could subdivide each of those into three or four separate options based on the configuration (single-master vs multi-master materialized views, for example).
You might group technologies like DataGuard-- logical and physical and Change Data Capture (CDC) under the general banner of replication depending on how you define the term.
You could always write your own replication process using database links, triggers, etc. Or load and unload data via export & import, SQL*Loader, and/or external tables.
Transportable tablespaces might also fall under the replication rubric.
Depending on the problem you're trying to solve, the granularity you're counting, and what you consider "replication", you could come up with anything from 2 to 1002.
Justin

How to get The users from a Collaborator that is type Group.

Hello, I'm trying to get the users (and their emails) of a collaborator inside a Master Agreement that is type group.
I've tried the following methods:
1- Using a IBeanHomeLocator to get the GroupIBeanHomeIfc (with the static variable of sHOME_NAME) and then trying to get the Group with the DocumentId that the colaborator's method (getDocumentId()) returns and the GroupIBeanHome method findGroup().
The result was null
2 - Using exactly the same method as before, but instead of using the DocumentId, I did a query, in order to get the field USER_GROUP_OBJECT_ID, to get the Id of the group.
The result is still null.
I'm not sure if there is a direct way to get it, or if i'm misusing the GroupIBeanHomeIfc.
Thanks in advance!

Hi Oscar,
In the document collaborator class there is a method getCollaboratorType() which returns CollaboratorTypeEnumType and there are certain values assigned to them.
user - A user collaborator
group - A group collaborator
contact - A user contact
So, hashcode of 2 returns the group.
Please have a look in to the below code.
collaborators = doc.getCollaborators();
     if(collaborators.size() > 0)
        collabIter = collaborators.iterator();
          while (collabIter.hasNext())
             member = collabIter.next();
             collabType= member.getCollaboratorType();
             hashValue= collabType.hashCode();
                if(hashValue==2)
                          collabName= member.getDisplayName();
                          throw new ApplicationException("collabName:" +collabName);
In the above code collabName returns the name of the group, with this you can search for the specified group using IbeanHomeLocator for group and then you can get the members in it and their mail Id's
Hope it helps you and let me know if you need any assistance.
Thanks,
Raj.

Change transaction type group for transaction type

Hi
Is it possible to change the transaction type group for a TTY.For ex i want to change for 270 and 151 -TTY GRP -32 and 33 respectively.As of now it is TTY grp is 25 and 10.I need to change this so that in Asset history sheet when i do ABT1N i want these values to be in field transfer and not in acquisition and retirement in respective company codes.
Where is TTY grp are set for TTY.Can it be modified.Please suggest.

For creating transaction type see the wiki.
In the transaction types you assign them!
For 151
SPRO:
Financial Accounting / Asset Accounting / Transactions / Acquisitions / Define Transaction Types for Acquisitions.
Assign there the asst hist group you need for this transaction type
For 270
SPRO:
Financial Accounting / Asset Accounting / Transactions / Retirements / Define Transaction Types for Retirements
Assign there the asst hist group you need for this transaction type

Error MIGO AA629 Balance for transac type group 10 negative for the area 01

Hi
I have the following principal case in the PRD (version 60.0 ECC):
Active 25000549 number was discharged from the transaction MIGO 18/12/2009 USD 19295.22 and began to depreciate on 01.01.2010.
On 22.04.2010 the vendor issues a credit note USD 11626.96 therefore created the Purchase Order number 9900000903 and when it will account for the transaction MIGO get the error message AA629 ( Balance for transaction type group 10 negative for the are). In transaction MIGO are using the kind of movement 161.
SAP looked in and found a related note the following: 497297, 541200, 547233 but they refer to version 4.7 and 4.6C and make no reference to version 6.0.
The error detail is as follows:
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000025000549-0000
Diagnosis
With the transaction entered, the balance for the transactions in group 10 in area 01 will be negative in this fiscal year. However, the balance of transaction type group 10, according to its definition, must be positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your posting. If you want to post a credit memo to an acquisition from the previous year, then use a transaction type for a retirement. If necessary, you can change balance rules after talking with your SAP consultant.
My questions are: someone has thought of something similar? how to solve? must implement the foregoing notes?
Thank you very much for your kind help

Hi,
notes 20347 and .302756.
Try to change following customizing temporarily to 160:
IMG->FI-AA->Transactions->Determine default transaction types for
     internal transactions->Acquisition from goods receipt
Another alternative could be to TEMPORARILY change the definition of transaction type group 10 so that it allows negative values.
139899   AA629 when posting MR01/MRHR/MIRO invoice receipt
AA629 is raised when the transactions per transaction type group in one year are negative in balance and the definition of the transaction type group only allows positive values (that means TABWG-VZJSAL is '+'). This is the case for transaction
type group 10. After posting transaction I recommend to set transaction   group 10 back to its original definition.
Regards Bernhard

CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

Transaction Type Group

Dear All,
Where do I find the config for Transaction Type Group (TTG)?
FYI - I read about this in SAP library and it stated that TTG : " The number of possible transaction type groups, as well as the characteristics of the individual groups, is specified in the system and cannot be changed ." Is this hard coded somewhere?
Furthermore, according to the SAP library, this TTG can determine few items eg: "According to which rule the start period for the depreciation calculation is determined"
Reason: I notice that when an AUC is being capitalised to Final Asset using
1) Settlement (AIAB and AIBU)
2) Transfer (ABUMN)
both will give difference depreciation value - even if they are under the same asset number - which means same depreciation key. I need to investigate this and I suspect, it got to do with the TTG or not the period control method in depn key.
Appreciate your advise. Thanks.
Regards
Fauzi

Where do I find the config for Transaction Type Group (TTG)?
Go to the table V_TABWG. It will be in display mode. To create/edit the TTy group you have to click the change button.
Note: Any changes to this table is not recommended by SAP... be EXTRA careful when creating new entries
F1 help on period control group reads as below.
The system determines the beg. or ending period for the calculation of depreciation based on the asset value date of the transaction and the specificiations in the period control.
The period group specifies which period control the asset value date of a specific transaction type group corrects.

Condition Type Groups - Rebates

Plz make me understand d use of the "Condition Type Groups" with example. The F1 help n stuff on SDN has already been checked, some1 who has worked on rebates will b able 2 xplain better d xact need of "condition type groups" e.g sometimes v have only 1 condition type assgined 2 it bt diff tables of that condition type n sometimes just 1 table of 1 condition type then wat's d need of it?
An answer with a small scenario would b of gr8 help.
regards

Hi,
i think u r working on rebtes,
Condtype grup is used to group the condtypes together to come in an agreement for selection.
for example:
you r working material rebate
for this condtype is BO02, for this condtype you want to use 3 key combination (condtables/accesses in access sequence). how you club these cond accesses to ur agreement type. unless u group them. here u group them when assign condtable 1,2,3, to BO02 in this screen.
observe this example:
condtypegrup         counter          condtype                  table
xyz                          1                 BO02                          1     customer/material
xyz                           2                 BO02                          2    region/material
xyz                          3                 BO02                          3     countrly/material
xyz                          1                 BO03                         1      customer/material
xyz                           2                 BO03                        2      region/material
xyz                           3                 BO03                        3      countrly/material
now u assign this condtypegroup to agreemtn type for say XXXX,
finally u create agreement type in BO01 t.code
at the time of agreemtn creation u get all the above combination for selection in a popup. that 6 options in two condtypes in on conditiontypegroup.
hope u understand
regards,
sadanandam kasarla

Customize transaction type group

Hi,
Are we able to customized transaction type group?
For post capitalisation, I do not want to post accum depre. The g/l posting should be Dr : Asset, Credit : Offset Account.
Please advise.
Thank you
YL

Hi,
no, but you can create new transaction type groups via SM30 in the table TABWG.
regards Bernhard

T.code for transaction type groups (FI-AA)

Hi Friends,
Please can you tell me the t,code for creating transaction type groups. ( Transaction type groups are attached to transaction types in t.code AO73).
Thanks & Regards
Bhairavi

Hiya,
T.Code: OAVJ
However, I wouldn't create Transaction Group Types if I were you... since there is a lot of config behind it that you need to be careful with.
I assume you know what you are doing.
Cheers.

Material Group Replication from ECC

Dear SRMers,
System Landscape : ECC 6.0 and SRM 5.0.
I am doing a material group replication from ECC to SRM using the DNL_CUST_PROD1 customizing object. Before the replication ECC was trying to confirm the target RFC destination(SRM) by prompting a logon. I logged in as myself and the system gave a CALL_FUNCTION_OPEN_ERROR.
I defined the CRM Consumer as SRM in the CRM middleware parameters..
My question is do we need to define the User SRM in SU01 and when ECC tries to confirm the target RFC destination, do we need to login as the SRM User ?
Points will be rewarded for answers.
Thanks in advance,
Bob

Hi,
The RFC user which you define in the SRM RFC detsination has to be obviously as SU01 user in SRM.Also the RFC user need to have SAP_ALL and SAP_NEW profile attached.See note 642202 for details.
Also Check:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/84/d3eb4190966024e10000000a1550b0/frameset.htm
BR,
Disha.
Pls reward points for useful answers.

Type Group

what is Type Group? explain it?

Type Groups
Before Release 4.5A, it was not possible to define standalone types in the ABAP Dictionary to which you could refer using a TYPE addition in an ABAP program. It was only possible to refer to flat structures. Structures in programs corresponded to the structures of database tables or structures in the ABAP Dictionary. In ABAP programs, you could only refer to database tables and structures in the ABAP Dictionary using LIKE. It was, however, possible to refer to individual components of the Dictionary type. Complex local data types such as internal tables or deep structures had no equivalent in the ABAP Dictionary. The solution to this from Release 3.0 onwards was to use type groups. Type groups were based on the include technique, and allowed you to store any type definitions globally in the Dictionary by defining them using TYPES statements.
The definition of a type group is a fragment of ABAP code which you enter in the ABAP Editor. The first statement for the type group <pool> is always:
TYPE-POOL <pool>.
After this came the definitions of data types using the TYPES statement, as described in Local Data Types in Programs. It was also possible to define global constants using the CONSTANTS statement. All the names of these data types and constants must begin with the name of the type group and an underscore:
In an ABAP program, you must declare a type group as follows before you can use it:
TYPE-POOLS <pool>.
This statement allows you to use all the data types and constants defined in the type group <pool> in your program. You can use several type groups in the same program.
example :
Let the type group HKTST be created as follows in the ABAP Dictionary:
TYPE-POOL hktst.
TYPES: BEGIN OF hktst_typ1,
 col1(10) TYPE c,
 col2 TYPE i,
 END OF hktst_typ1.
TYPES hktst_typ2 TYPE p DECIMALS 2.
CONSTANTS hktst_eleven TYPE i VALUE 11.
This type group defines two data types HKTST_TYP1 and HKTST_TYP2, as well as a constant HKTST_ELEVEN with the value 11.
Any ABAP program can use this definition with the TYPE-POOLS statement:
TYPE-POOLS hktst.
DATA: dat1 TYPE hktst_typ1,
 dat2 TYPE hktst_typ2 VALUE '1.23'.
WRITE: dat2, / hktst_eleven.
The output is:
1,23
11
The data types defined in the type group are used to declare data objects with the DATA statement and the value of the constant is, as the output shows, known in the program.

How to add reference to a type group from ABAP webdynpro?

Hi,
When I copied the webdynpro application from a system to another with SCWB, the referenced types in type groups are reported not defined, even the types from basic type group ABAP - the type groups are defined in both systems, the webdynpro app works well in the original system.
And I didn't find the way to add type group references in webdynpro with "TYPE-POOLS:". Anybody knows how to handle this?
Thanks and regards, Said

OK I found it.
Under my main program there is a global include. A co-worker called it somehting different.
So it had:
type-pools: rs, rsr, rro01, rrk, rro04.
And I change it to:
type-pools: rs, rsr, rro01, rrk, rrs0, rro04.
Yes, Then when I r-click on the main program and select "Rebuild Object List" then it added the type group under "Type Group".
Mike

Material Ledger Movement type Groups

I need to activated ML in a SAP ECC 5.0 client, But When I add entries in OMX7 (Define Movements type groups of Material Ledger) I can not modify "Revaluation of consumptios" field. Is there any dependence I need to review before add a group?
I have been reviewing other clients and it is possible. Why I can Add groups but not change this field?

I guess the revaluation of consumption functionality resides in the financials extension. Therefore a precondition for that setting might be to switch on the extension.
best regards,
Udo

Ironport - new file type group

Is it possible to create a new file type group on an Ironport c360? Or is is possible to add a specific file type to an existing group? I figure there is a config file somewhere with this data but, so far, I'm unable to find it.
Thanks
If this is the wrong location for this discussion please redirect me. I have not been able to read any existing discussions on in the official ironport area.

Kirk;
You may want to move this thread to the IronPort > Email Security community to get better exposure.
Scott

Transation type group replication

Similar Messages

Maybe you are looking for