Transcode not needed, but the exported files are very large

Hi. I imported a video file (*.m2v) and its associated audio file (*.wav) to Encore. These two files were transcoded and exported by Premiere Pro (setting of the Encoder was MPREG-2 DVD). Now, in Encore, I chose NOT to transcode, because the files are DVD compliant already, and second their total size was less than a DVD's capacity (video file 3.3GB, 6Mbps;;;; Audio file 850MB, 1.5Mbps). My question:why did the Exported Dvd have 7.5GB in size?? Though the total size of video and audio is (3.3+0.8=4.1GB). I have a main menue only that has no fancy stuff nor motion.

Thanks Ruud Blauw. You were right. I used the same assets in two time lines, which resulted in exporting the movie in two twin copies, each was put as a single title in the DVD. What bothers me is that I had no way of seeing this on the [Timeline Viewer]; in other words, I couldnt see two time lines before I export the movie.
After experimenting, I realized that the first"wrong" situation differed from the new"correct" situatioin in only the [Project Tab]: the 'wrong' situation had 4 items in the [Project Tab]: Video file, Video Timeline, Audio File, Audio Timeline. On the other hand, the 'correct' situation had a [Project Panel] which had only 3items: Video File, Video Timeline, Audio File. This means that the difference was only the existence of an Audio Timeline.
Although I am new to Encore, this makes no sense to me. But fortunately it got resolved.

Similar Messages

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I just updated to 5.7 and the exported files are blurry. I compared the ones I exported before the change and they are fine. I have not change any settings.

I don't understand your last paragraph.
"The home page also has a full bar ..." What does "full bar" mean? " ... instead of the tray it had before." What does "tray" mean?
Anyway, you might try Settings > General > Reset > Reset Home Screen Layout
I guess that cannot make things any worse.

HT204370 My movie is not downloading but the movie extras are, how do i get the movie back without re-purchasing it?

My movie is not downloading but the movie extras are, how do i get the movie back without repurchasing it? I've tried searching through my available downloads but only the extras showed up not the movie. All my other movies are there including the extras from the movie. I really want the movie & I don't want to repurchase it if I can avoid it.
When I tried to get it through my Purchased in iTunes - iStore it says
" You have already purchased this item"
"You have alreaady purchased this item but it has not been downloaded. To download it, select Check For Avaliable Downloads from the Store menu."
Which leads me right back to having all the other tv shows & movies that aren't on my laptop downloading but not the actual movie I want. I already have the extras but I really would like the movie .
Any help or advice would be appreciated
Thank You

See Recover your iTunes library from your iPod or iOS device.
tt2

The PST files are rather large and contain tons of folders each

The PST files are rather large and contain tons of folders each, so it's kinda hard to go through each one finding this very specific Subject line. Is there any other way to scan within the PST files to find a particular text string, like this Subject
line? Before I start googling this stuff, I thought someone might already been there/done that.

Great, but all pst files aren't indexed so this could take a long time if you try it this way.
Outlook Recovery Toolbox from: http://goo.gl/MU7fEk and it helped me to get the PST data after a heavy corruption. This is the capable software which can also be used to get the deleted pst data like emails
etc. You can find it here: http://goo.gl/MQn5gI

I deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.

Logic Pro 9- I saved a song- the audio files did not bounce and are nowhere to be found. The song is still there, but the audio files are missing. Any ideas?

I have searched the computer by song name in the audio files.
I have opened up media files and looked everywhere.
I tried remapping where they would be saved and hoping they were updated.
Any help finding where they are located would be great. The song still loads when I open it, I just can't find the audio files!

Have you tried using the built in Browser in LP?
http://help.apple.com/logicpro/mac/10/#lgcpc788cc57
Note: It works the same way in LP9 as in LPX

Blurry youtube videos, but the exported file is perfect. Help pls!!!

First off, an exaple of what I mean:
http://www.youtube.com/watch?v=XyndM70hz6w
The rendering settings I use with adobe premiere pro cs6
How is it possible that my video's om youtube get so damn blurry? Btw, i have tried lowering the bitrate but it does not make them less blurry . . . just lowers the overall quality.
I rlly need help with this, as i am new to the programm.
Thnx in advance!

http://www.youtube.com/watch?v=MFzUryUkVqA and http://www.youtube.com/watch?v=TVeH8HFW4sU - Every time the camera makes a turn u can defo see the diffrence in the square boxes and the chat.
http://www.youtube.com/watch?v=XyndM70hz6w at 0.55 when the window popps up,1.10 it starts and when im flying its horrible.
Make sure u look at it on a 1080p screen. Maybe im just insanely picky with it but it rlly bothers me when its not perfect, but i know it can be of much better qualy cuz i've seen it on youtube before.

HT1711 My computer caught virus, My songs are listed in my library, but the music files are gone! I have them on my separate hard drive but don't know where to put them back on my computer so itunes recognizes them. Help !

My computer caught a virus. My entire drive was wiped clean, however, I had recently done a backup to a portable hard drive. When I got my computer back from the tech, and logged into my itunes, my library shows all my songs, but NONE of them have a music file associated with it - therefore I cannot play it. I have located the music files on my external hard drive, confirmed they play, but don't know how to go about getting them from my hard drive to my computer. Can someone please help me?????

In iTunes, go to File > Add to Library and select the files/folders you would like to add.
You can also choose to consolidate library after that to move them off the external.

Getting message about not enough storage on my iphone 5s. The "Attachment file is very large and I have erased all documents in it, yet it still shows a large volume of storage being used.

I am getting a message that I am running out of storage on my Iphone 5s. The problem may be in my mailboxes. I have eliminated many emails and all documents in the "Attachments file. However, the attachment file still shows an number that is over 4 billion (not sure is this is the number of documents or what it represents) Is this is the source of my storage problem, I'm not sure how to solve it.

Couple of things to try:
If you can access the account on a computer - make sure that the offending email is no longer there
Then delete the email account on the phone - no email loss is incurred
Then reset the phone - hold down home and sleep buttons together until you see Apple logo and then release and allow normal boot up - no data loss
Then reinstall the email account
(975)

Buffered TDMS file still very large

Hello, I am trying to to stream to a TDMS file. I am writing approximately 10 channels of data at 20 Hz. I was creating a new file evey 5 mins or so and defragging the file once I was finished with it, which was giving me a reasonable size of file. I decided that I would like to make bigger files (over the period of hours) and the the defragging would be too computationally costly to do on the fly. I have been trying to set a buffer for the TDMS files but the resultant files are very large. You can tell the file isn't being writen until its closed (from watching its size in windows explorer) which suggests the file is being buffered. However its about 6 times bigger than an ASCII file of the same data, with and index almost as big again.
Does anyone have any ideas why it would appear to buffer but not actually reduce the data size. I'm running Windows XP, LabVIEW 10.0.
When I create each new file I run this to set the buffers. (I have also hard wired in a buffersize of 100000 on a one minute file to no avail.
Niall
Thanks
Niall

I has this marked as the solution but it turns out it only helped one of my programs. I am still getting very large (fragmented) TDMS and index files for another program. The problem is that if I just defrag the (supposedly buffered) file, it interupts the data logging because it takes so long. I'm 99% sure that it *is* buffereing as it doesn't write till it closes the file, and if I use the read properties function it reads back a set buffer size. Here is the VI that actually writes the data. There bit at the top is for writing an optional acii file so you can ignore that.
Its maybe a bit hard to see whats going on in the next one, but this is where the file is created before being passed to the setbuffer VI which I posted earlier. It also closes that last file
Its really hacking me off now and holding me up from going no to other stuff. It would be great if someone had some ideas.
Thanks
Niall

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Hello, I need to authorize digital adobe (ID) so I can download a book but I get the following message "the account provider you entered is not associated with the item you are trying to open. Try again." what should I do? Thank

Hello, I need to authorize digital adobe (ID) so I can download a book but I get the following message "the account provider you entered is not associated with the item you are trying to open. Try again." what should I do?
Thank

This is the Adobe Reader forum; please ask in the Digital Editions forum.

Need to re-burn a DVD, but some source files are missing. But Media Cache folder has them all.

hi all. I have PE3 and the issue is this: I needed a DVD of a project I'd completed a year ago, and I didn't have an old copy of the DVD. So I decided to re-burn it. But on opening the project, it seems some of the source files have been misplaced on my computer, so it says 'media offline'.
I figured I'd still be able to burn it though, because the Media Cache folder contained all the required files...
However it starts to burn the DVD and then stops at 49% saying transcoding error.
Q1: can you still burn a DVD if it says 'media offline' but you know all the source files are present in the Media Cache folder?
Q2: what's the transcoding error?
thx

The Media Cache folder contains files that are only of use to PE during internal editing and will NOT solve your lost video problem.
Once a Project is completed, that have no outside value.
The contents are CFA and PEK files, which is the Conformed Audio and Waveform Display, respectively (no video here to my knowledge).
And I'm not aware of any way to make them useful (outside of PE).
If you happen to have your Project and source video/audio files intact, and then delete the contents of the Media Cache folder, upon re-opening the Project, PE will regenerate the CFA and PEK files. Again this is only if you have the Project and all the source files (Assets)...

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

Transcode not needed, but the exported files are very large

Similar Messages

Maybe you are looking for