Transcoding Error Premiere Elements 10

I would like to start by saying what a great forum this is, I am so glad I found it. The information here is...well, a little overwhelming at first.
I am new to elements 10, three weeks ago. I am trying to create a slide show of mainly stills (4320x3240) and a couple of clips (1280x720). I have a blueray player so to maximize the quality of stills on the tv I would like to output to Share/Disc/AVCHD and burn to a DVD disc. I start the project with the preset of NTSC/AVCHD/1920 x 1080 because the pixel size is square as I believe my pics are. I have taken Bill Hunt's recommendations to heart and resized my pics to 1080 tall, which will make them 1440 wide. The reason I don't use the 1440 x 1080 preset is because it is not square pixels. Is this correct?
The problem I am having is once the project gets larger, 50 stills, 2 short clips, transitions, titles, etc. I end up getting a "Transcoding error" while trying to burn it to a DVD. When I try to burn a smaller project half that size, it completes fine and I have the best looking pictures on my TV. Is the transcoding error possibly caused by lack of system resources or is there something else I am doing completely wrong? My system meets and slightly exceeds the recommended specs for Premiere Elements 10.

As Steve says, Scale the Still Images, prior to Import. The quality will be better, if you use a program, like Photoshop, or Photoshop Elements. This ARTICLE goes into more detail, plus will tell you how to use Actions, and Automate To>Batch, to Scale entire folders, almost instantly.
With HD-lite material, going to SD, there are some choices, and also compromises, that will need to be made. The choice of workflow might depend on how one likes to work, and possibly on some testing.
One workflow would be to edit the HD-lite material in a Project, that matches perfectly, and then Export/Share to DV-AVI. One would then create a New Project for DV SD, Import that material into it, along with your Still Images Scaled to the DV SD Project. This leaves ALL Still Image Scaling to PS/PSE, and the quality WILL be better. The downside is that your HD-lite material will be down-rezzed, but that will have to happen somewhere, so PrE is not a bad place to do it. The Projects will also edit smoothly.
Another, and a variation on # 1 would be to follow the guidelines in this TUTORIAL on down-rezzing from HD to SD, by Jeff Bellune.
A third workflow would be to create an HD Project, that matches your Source Footage, and also to Scale the Still Images to match THAT Frame Size. Edit, as is needed, then output to DV-AVI for the SD/DVD material. Then, one would create a New Project, for DV SD, and Import that DV-AVI into it, for any touch-up, and the final authoring to DVD-Video. The downside to this method is that one would be letteing PrE do the down-rezzing of the Still Images too, and PS/PSE is much better suited.
Good luck, and welcome to the forum.
Hunt

Similar Messages

Transcoding error Premiere Elements 2.0

I'm having trouble with burning to a DVD. I keep on receiving a transcoding error that reports that Adobe failed to return a video frame and it's cancelling the operation.
Most of the time the burn process fails at about 42 % although the last time I tried it failed at 28%. The movie is about 77 minutes long, the hard drive has about 36 Gb free which seems adequate to me. I've been through the movie almost frame by frame, it took a long time but couldn't see anything that might cause problems although I'm no expert One thing I did notice was that there were three clips that had not been rendered and resisted all attempts, instead of a Red/green line it was grey, is this normal and could this be the problem?
I have also tried to export the movie as a AVI file and create another project but again when trying to burn I got the same transcoding error.
Any guidance would be appreciated.
John

Have you tried this?
http://www.adobeforums.com/webx/.59b5f52c
Based on the information you've provided though, my first guess would be that you don't have enough free, defragmented space -- particularly if your source files are something other than DV-AVIs captured from a miniDV camcorder.

"No Disk" Error (premiere elements 11)

I have successfully installed Adobe Premiere Elements 11 on my PC:
     Dell XPS 8300
     Intel Core i7-2600 Quad Core (3.4 GHz, 8MB Cache)
     • 1GB Radeon HD 6450 Graphics
     • 16GB DDR3 1333 RAM
     • 1TB 7,200RPM Hard Drive (2 x 500GB RAID 0)
     • Windows 7 Home Premium 64-Bit
When I open the application and click "New Project" I get the following error message:
AdobePremiereElements.exe - No Disk
There is no disk in the drive. Please insert a disk into drive
     \Devices\harddisk2\DR3
I can "cancel", "try again", or "continue". The only thing that works is to hit "cancel" (several times). Premiere Elements will then open, but the error message will keep recurring.   Adobe Support (Chat) has not been much help.
Anyone else come across this? This seems to be a common error in earlier versions (version 9), but I can't seem to find any good solution to it.   HELP!!!!
UPDATE:   Just as an FYI..while it's possible (but doubtful) there is preloaded software interfering, there is no other software (or viruses) installed on this computer.
Message was edited by: [email protected]

Boomps, I installed from here and it worked fine:     http://helpx.adobe.com/premiere-elements/kb/installing-smartsound.html There are even step-by-step instructions. Good luck.
Date: Mon, 7 Jan 2013 04:46:21 -0700
From: [email protected]
To: [email protected]
Subject: "No Disk" Error (premiere elements 11)
    Re: "No Disk" Error (premiere elements 11)
    created by BoompsXXX in Premiere Elements - View the full discussion
Not an answer!! I am new to this. I get the same error message and from what I can gather reading the traffic, I have to reinstall Smart sound. Can anyone help a simpleton. I searched the DVD for all files referencing Smart sount, there is plenty. I don't really understand how I reinstall and what??Any help would be great!!ThanksTara
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4973936#4973936
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4973936#4973936
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4973936#4973936. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error compiling movie 'unknown error' premiere elements 11, tried every troubleshoot, what now?

I'm trying to export a video and I keep on running into this error message, which stops the export process. I've already visited and tried the troubleshooting suggestions on this page and this page, and this page, and none of those suggestions have worked. Here's a list of what failed:
Export in various file formats, every single one failed
I removed each asset individually and tried to export the video after each removal (100+ assets, imagine how long that took) and I got the error after every single time
I removed the front half of the video and tried exporting, still failed.
I removed the back half of the video (because if it failed if I removed the front, the problem asset should be in the back, right? nope.) and tried exporting, it still failed.
I don't have any Auto Color, Auto Contrast, Auto Levels, or Shadow/Highlight on any of my clips, although if I did, I'd try removing them.
All of my video files are the same format, so it's not a mix of formats in my timeline which is causing the problem.
I tried disabling auto-save, but it already tried to auto-save during the first 20 times I've attempted this, so the damage might already be done.
I obviously didn't use any other programs during this process
I moved all my assets to a different location on my harddrive, then reopened the project and refound the assests one by one, each of which had no problem getting into the timeline. I tried rendering after this, and the render bar sailed along until a certain point, where it got stuck indefinitely. I cancelled the render, which froze the program. I had to close it and re-open the project, and re -link every asset again. Once again there were no problems adding the assets. I saved the project before the next render, so I wouldn't have to do this a third time, and it was a good idea I did, because the program froze again during the subsequent render.
My computer didn't go to sleep or hibernate during the first 5-10 times I tried various methods for exporting. It has slept in some of the 10+ times I've tried it since, because I don't have the patience to sit in front of my screen and watch it fail again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again and again. CAN YOU TELL THAT I'M FRUSTRATED???
The first thing I noticed that was wonky with this project was when I first tried to render my sequence. The render window chugged along just fine until it got to a certain point (can't remember the %), at which point it got stuck indefinitely. I had to cancel the render, and then render other parts of the sequence bit by bit, avoiding what I thought was the problem part. I tried rendering the problem part, and it got stuck again, so I eventually just decided that that clip didn't need to be in this movie, so I deleted it from the timeline. All should be good at this point, my whole timeline is green from being rendered. But, when I tried to export the video, I started down this tourtuous path of failed exports and frustration, and now here I am, posting in the forum, hoping someone can help me out.
The problem asset (if that was the problem in the first place) isn't in the timeline any more, but I'm still having issues exporting the movie. The fact that rendering still gets stuck after re-linking assets, and after getting rid of the first problem asset, makes me think that there is some bigger underlying issue, but I have no idea what that could be. I followed these instructions and re-opened the project, tried to export, and still got that 'Unknown Error'.
Please assist before I put my fist through this company computer.

maxlong99
Thanks for your update. Let us go through it.
You wrote
During one of my isolation tests, I stripped the timeline off all assets except clips from the same footage and I also removed that New Blue effect, and the project exported without issue.
Did you run a control which included "with the New Blue effect" in this isolated test which does not sound like the "Full Project" as suggested in what you wrote next?
You wrote
Could multiple renders and project files be part of the problem? I've created many, many different versions of this project to test and see where the problem is, which in turn means I've created many different render files for each different project. If this could be part of the problem, should I keep the original project and delete all my test projects and associated render files therein?
Each of the projects should have its own name which will be applied to its files. And each project should have rendered files specific to it (for SD project whether video or still clip = DV .avi file; for HD project whether video or still clip = MPEG2.mpg file). Are you naming these different projects with distinctive names?
Have you expanded the Timeline with the -+ slider and closely inspected the track content for
a. leftovers such a very thin vertical black lines scattered about
b. gaps
c. transitions, and especially audio placement
You have probably seen the following, but I will post the link just in case. I suspect you have been there and done that.
http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
Please let us know what the closer inspection of the Timeline content (as mentioned) revealed.
Thanks.
ATR

YouTube uplaod error Premiere Elements 12

So I've downloaded a few videos directly from my Premiere Elements 12 about 3 times to Youtube with success and now today suddenly I get an error after the video finished rendering and uploading as soon as the "transferring to Youtube" saying: "Error: Sorry, an error occur during the uploading process. Please try again later."
It's been like this all day and I can't seem to find a solution.
Also another strange thing happened where now It doesn't let me upload a video longer than 10 min after I uplaoded a 12 min one successfully then after that it restricted me. But even this doesn't matter if now it won't let me uplaod at all. Makes no sense?! Please help, thankyou!

YouTube is a bit of a moving target, and they're constantly changing what does and does not work on the site.
Have you tried just outputting your video using Publish & Share/Computer/AVCHD with the YouTube HD preset and then manually loading the video to the YouTube site? This should give you excellent results as well as its sidestepping whatever is interferring with your program/YouTube interface.

"No Disk" Error (premiere elements 12)

When making an Auto Movie in pre12, as soon as i click the next button having selected the theme that I want, I get (No disk in drive D:), but if I eject the empty tray and leave it open all works fine.

Han
It does not make sense.
The SmartSound/Sonicfire Pro 5 feature is gone in Premiere Elements 12 and has been replaced by Music Scores which is in concept like SmartSound but is not SmartSound.
I think that your happening was by chance.
Recently I had a strange No disc situation. Never had one as long as I have been working with Premiere Elements products 4 to 12 over more than 10 years.
I decided to install CONTENT for Premiere Elements 10 on Windows 7 64 bit. After all was done apparently successfully. I started to use the program and went to apply a disc menu. That is when I got hit with the No disc message. I could not get rid of it. The only thing that would allow me to continue in the disc menu location was to insert the Premiere Elements 10 CONTENT disc which seemed unreasonable since all the CONTENT could be seen saved to the computer hard drive where it was supposed to be.
I decided to restart the computer for one reason or another. Immediately after the restart, there was no problem applying the disc menu in Premiere Elements 10. I did not have to work with the Premiere Elements 10 CONTENT disc in the burner tray to get my Premiere Elements 10 disc menus applied.
This one computer before and after this incident had SmartSound programs on it related to many earlier Premiere Elements versions that are on this same computer. So, SmartSound features or files did not appear to be implicated here in this No disc matter.
So I would caution you about a jump to judgment on
but somehow still looking for those smart sound files...
Please consider if there are any alternative explanations for your results.
Thank you.
ATR

Popup Error: Premiere Elements Debug Event

Hi,
After a succesfull installation our users can start and work in Adobe Premiere Elements 7 (APE7).
But if they save there project and try to close APE7 they get a popup. (see attached Screenshot .45.jpg, dutch version, but message is something like: There is a serious problem ...etc).
APE7 crashes and when they start again, our users see the folowing popup. (see attachesd Screenshot .46.jpg)
I also attached a screenshot from a part of a ProcMon logfile
It looks if Adobe Premiere Elements doesn't work with folder redirection (Appdata to share). In our situation we redirect users "document and settings\<user>\application data" to a networkshare (homedirectorie on a fileserver)
I tried to set the location forthe project savefolder to drive d:\, a removed the media cache to d:\ but that seems not enough.
What would you advise me to do?
Best regards,
a denm

After a succesfull installation our users can start and work in Adobe Premiere Elements 7 (APE7).
But if they save there project and try to close APE7 they get a popup. (see attached Screenshot .45.jpg, dutch version, but message is something like: There is a serious problem ...etc).
This leads me to believe that you are in a networked environment, possibly in an academic institution's media lab.
Unfortunately, if you are, things will not be all that easy. Both PE and PrPro (plus its Encore authoring app) are designed around the user having full Administrator privledges and their files not being in a networked environment. One can work with simple P2P LAN's and even with media on a NAS, but a full networked environment causes major problems. Giving students full Administrative privledges also has a high potential for problems from an IT standpoint.
Adobe TS is the best course. They may have some solutions for your problem. There are also several thread on the forum on academic networked situations. In a few of these, there were good suggestions, but so much will depend on the exact networking employed.
I've file Feature Requests for more network support with these programs, even though it does not directly affect me. I see a great sales potential for Adobe to get as many copies of their editing programs into the hands of students, and the lack of full networking capabilities stands in the way. You might also wish to file a FEATURE REQUEST for this.
Now, if you are NOT networked, ignore my post.
Good luck,
Hunt

Install fails with error -Premiere Elements 12 US

Error 1326.Error getting file security:
C:\ProgramData\Adobe\Photoshop Elements\Catalogs\
GetLastError: 5
Ran Norton 360 Registry Cleaner, re-booted machine
Same error
Ran loganalyzer but I cannot determine problem
Win 8.1 64bit 8GB RAM Elements 10 currently on computer.
No reference to this error in Support.
Please advise

Rammer47
Please take a look at the following and then let us know if any of what worked for Mike worked for you.
http://windowsforum.com/threads/error-1326.68644/
Thanks.
ATR

Compiling video error premiere elements 8

Hi
Sorry this question has been asked before and has been given some input.
When i had first installed PE8 ( 10/08/2010 ) and created a short video into mpeg format, it had worked but since then i have not been able to 'share' in any format whatsoever.
I always end up with this message 'Error compiling movie' uknown error'
I have tried doing what was the replys to a post about updating drivers but still the same message appears.
Could it be a codec issue? Apart from that I have no ideas left on what to do to fix this problem.
Any help would be great.
Thanks

Thank you for your reply.
The first movie i created worked fine with video and mp3.
In fact i have changed the content within the timeline for my 2nd video but there are no gaps.
Am using the same files as i did before. This time i had added stills to the video.
I have tried deleting the stills and tryed to export but same error message.
I havent installed or removed anything on my computer.
I've even gone back to my first video i try to export but to a different format but error message pops up again.

No disk error in Premiere Elements 12 - Smartsound plug-in?

I have a fresh install of Premiere Elements 12 (with 12.1 update) on a new computer and receive the error "There is no disk in the drive. Please insert a disk into drive E:" whenever the program is opened or closed. I can bypass this message by repeatedly clicking "cancel". Windows application logs in event viewer lists a corresponding error message "Activation context generation failed for C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". I confirmed that this file does not exist.
A forum search indicates that installing Smartsound resolves this no-disk error for PrE 11 and earlier but that Smartsound is no longer a feature in PrE 12:
Re: No Disk Error for Adobe Premiere Elements 12
But another other user reported that the no-disk problem went away in PrE 12 after installing Smartsound:
Re: "No Disk" Error (premiere elements 12)
And my event viewer error message indicates that PrE 12 is looking for a Smartsound plug-in which was not included in the installation. (PrE 12 was installed via Dell Digital Delivery and did not include an installation disk.)
So why is PrE 12 looking for a Smartsound plug-in if it is no longer a feature? Any suggestions for suppressing the no-disk error other than installing Smartsound? I'm just getting started in PrE and don't need it right now.
Thanks,
Greg

Thank you for the advice. I tried Han's suggestion of installing Smartsound SonicFire first since it was much quicker than completely reinstalling PrE (which entails many hours of re-downloading on a DSL line for the program & cloud content).
After installing Smartsound, the "SmartSoundAdobePlugin64.prm" file did appear in the C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\ folder. However, it did not resolve the "No Disk" error or the application error logged in Event Viewer. The source of that error is listed as "SideBySide" and Event ID is 33. The full text of the message is as follows:
Activation context generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 12\Plug-ins\Common\SmartSoundAdobePlugin64.prm". Dependent Assembly Microsoft.VC90.MFC,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type=" win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis.
I did a bit of research and this answer suggests that the error is the result of an incompatibility between the installed version of Microsoft Visual C++ and the version used by the program:
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/event-id-33-so urce-side-by-side/ef67e34f-07b2-4d52-a807-f9f81a7c32f8?auth=1
Based on this Microsoft article, it appears that the missing C++ 2008 version 9.0.201022.8 is an IA-64 version while the 9.0.30729.x versions on my machine are x64 versions:
http://support.microsoft.com/kb/973552
This is all way over my head and I may leave well enough alone until I have more time to spare, given that the "no disk" error (which could even be entirely unrelated) is annoying but not crippling.
FWIW, the machine is a Dell XPS8700, Windows 8.1, 64-bit, and PrE was sold by Dell it, bundled with Photoshop Elements.
Greg

Problem with Adobe Premiere Elements 10 : error DW046

Dear community members,
I have bought Adobe Premiere Elements 10 and installed it from the DVDs on my MAC OSX10.5.8 on december 27, 2013
When creating a new project , I get the following message :
following a serious error, Premiere Elements 10 must stop
Then I click OK and I get a new message :
The Premiere 10 application has closed suddenly after having been rebooted
Then I end up to the error report window. I have sent the error report to Apple ( I can send it to you if you want)
I have also got the following error message :
DW046 : following conflicting process were running, block : dynamiclinkmanager
Notice : it seems this problem is occuring since I underwent a power failure while working on a project. When I want to open an existing project I get the following message :
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
When I say YES, I save it and it comes back to the welcome menu and I cannot see this project.
I have tried to deinstall and reinstall Premiere 10 : this is impossible since I am required to deactivate dynamiclinkmanager that I cannot find.
Notice that Adobe AIR is unable to find a solution whilst it recognizes there is a problem.
Thanks you for your help

AT Romano,
The various links you have provided were very helpful. I could kill the dynamiclinkmanager.
It seems that it is now working.
Thank you, your reply was very quick and your advices very good
Kitaguchi38
Date: Wed, 1 Jan 2014 19:39:00 -0800
From: [email protected]
To: [email protected]
Subject: problem with Adobe Premiere Elements 10 : error DW046
    Re: problem with Adobe Premiere Elements 10 : error DW046
    created by A.T. Romano in Premiere Elements - View the full discussion
kitaguchi38
When you get the message
it seems that Premiere Elements has closed in an unexpected way during the last session. Do you want to open the previous project?
Do you go to the last AutoSave to open that or do you go to the save location of the project file (project.prel) to open that file?
Are you getting message to close the dynamiclinkmanager so that you can move forward?
If so, please check out dynamiclinkmanager location in the following link
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations -photoshop-elements.html
Have you seen this Photoshop Elements Forum thread with the same DW046?
http://support.muse.adobe.com/message/4771879
More later.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972397#5972397
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972397#5972397
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972397#5972397. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Premiere elements has encountered an error (preferences.cpp-353)

Hi guys, trying to get Adobe premiere elements working on a windows domain, will only run for local administrator, logged onto machine locally, not even a full domain administrator.
Any ideas?
Any help would be very very appreciated.

Hi ATR,
I really appreciate you taking the time to reply, sorry for the lack of info in my previous message was pulling hairs out when i wrote that!! I really do appreciate any help you could give with this at all.
Here are the answers to those questions.
1. What version of Premiere Elements are you using and on what computer operating system is it running?
     It is the latest version of Premiere Elements 13, we are trying to get it to install on Win 7 32bit.
2. Are you running the program from a User Account with Administrative Privileges and have you applied Run As
Administrator to the program's desktop icon?
     They are domain based machines, if you log on as local administrator on the machine the software will run, but if you log on as a domain user or even full domain admin it still doesn't load properly we get the error "Premiere Elements has encountered an error. [..\..\Src\Core\Preferences.cpp -353]
3. Is this a "it worked before but not now" or "it never worked before" issue?
     It is new software we have never ran on our network before.
4. Have you deleted the Adobe Premiere Elements Prefs file or the whole Folder in which it exists?
     I did a search of the entire C drive of the machines for the preferences file and couldn't find it to try deleting it.
5. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
     Yes i have tried installing the new version of quicktime on the machines, even though the version we already had installed met the recommendations.
6. Does the problem exist with or without the antivirus and firewall(s) disabled?
     Firewall is disabled across the domain, i've tried disabling the AV and it didn't make any difference.
7. Are you using the program with a mouse or one of those pen and tablet devices?
     Just a normal mouse and keyboard.

[..\..Src\DirectoryRegistry.cpp-283] error when starting Premiere Elements

This error only happens when the laptop is disconnected from our domain. When trying to start Elements I receive error:
Premiere Elements 8.0 has encountered an error.
[..\..Src\DirectoryRegistry.cpp-283]
Then program will not start unless I connect the laptop to the network - which makes a portable laptop useless.
I have uninstalled and re-installed the program with the exact same results.
Anyone got any dieas?
Thankyou in advance.
Crash log file has been included
<?xml version="1.0"?> <!DOCTYPE crashreport SYSTEM "AdobeCrashReporter.dtd"> <crashreport version="1.1" crVersion="3.0.20090804" applicationName="Adobe Premiere Elements" applicationVersion="8. 0. 0. 0" build="unknown"> <time year="2009" month="11" day="19" hour="11" minute="51" second="20"/> <user guid="323c9019-64a6-4b68-8502-a51259f444ab"/> <system platform="windows" osversion="5.1.2600 SP 3.0" applicationlanguage="English (United States)" userlanguage="en_AU" oslanguage="en_AU" ram="2035" machine="Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz" model="x86 Family 6 Model 23 Stepping 10" cpuCount="2" cpuFreq="2394 MHz" busFreq="" locale="English (Australia)"/> <crash exception="EXCEPTION_BREAKPOINT" instruction="0x0097df10"> <backtrace crashedThread="0"> <thread index="0"> <stackStatement index="0" address="0x0097df10" symbolname="dvacore::debug::DVA_DebugBreak"/> <stackStatement index="1" address="0x00a0123a" symbolname="dvacore::utility::ThreadSafeMessageDialog"/> </thread> </backtrace> <registerSet> <register name="EAX" value="0x00000000"/> <register name="EBX" value="0x00000000"/> <register name="ECX" value="0x00000000"/> <register name="EDX" value="0x00000000"/> <register name="ESI" value="0x00a0103e"/> <register name="EDI" value="0x00000000"/> <register name="ESP" value="0x00000010"/> <register name="EBP" value="0x00000008"/> <register name="EIP" value="0x00000000"/> <register name="EFL" value="0x00000246"/> </registerSet> <binaryImageSet> <binaryImage start="0x00400000" end="0x00519000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\Adobe Premiere Elements 8.0.exe"/> <binaryImage start="0x7c900000" end="0x7c9b2000" type="__TEXT" path="C:\WINDOWS\system32\ntdll.dll"/> <binaryImage start="0x7c800000" end="0x7c8f6000" type="__TEXT" path="C:\WINDOWS\system32\kernel32.dll"/> <binaryImage start="0x4ec50000" end="0x4edfb000" type="__TEXT" path="C:\WINDOWS\WinSxS\x86_Microsoft.Windows.GdiPlus_6595b64144ccf1df_1.0.6001 .22319_x-ww_f0b4c2df\GdiPlus.dll"/> <binaryImage start="0x77c10000" end="0x77c68000" type="__TEXT" path="C:\WINDOWS\system32\msvcrt.dll"/> <binaryImage start="0x7e410000" end="0x7e4a1000" type="__TEXT" path="C:\WINDOWS\system32\user32.dll"/> <binaryImage start="0x77f10000" end="0x77f59000" type="__TEXT" path="C:\WINDOWS\system32\gdi32.dll"/> <binaryImage start="0x774e0000" end="0x7761d000" type="__TEXT" path="C:\WINDOWS\system32\ole32.dll"/> <binaryImage start="0x77dd0000" end="0x77e6b000" type="__TEXT" path="C:\WINDOWS\system32\advapi32.dll"/> <binaryImage start="0x77e70000" end="0x77f02000" type="__TEXT" path="C:\WINDOWS\system32\rpcrt4.dll"/> <binaryImage start="0x77fe0000" end="0x77ff1000" type="__TEXT" path="C:\WINDOWS\system32\secur32.dll"/> <binaryImage start="0x77a80000" end="0x77b15000" type="__TEXT" path="C:\WINDOWS\system32\crypt32.dll"/> <binaryImage start="0x77b20000" end="0x77b32000" type="__TEXT" path="C:\WINDOWS\system32\msasn1.dll"/> <binaryImage start="0x773d0000" end="0x774d3000" type="__TEXT" path="C:\WINDOWS\WinSxS\X86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_ 6.0.2600.5512_x-ww_35d4ce83\comctl32.dll"/> <binaryImage start="0x77f60000" end="0x77fd6000" type="__TEXT" path="C:\WINDOWS\system32\shlwapi.dll"/> <binaryImage start="0x10000000" end="0x1013c000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\AdobeOwl.dll"/> <binaryImage start="0x7c420000" end="0x7c4a7000" type="__TEXT" path="C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x -ww_6b128700\msvcp80.dll"/> <binaryImage start="0x78130000" end="0x781cb000" type="__TEXT" path="C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x -ww_6b128700\msvcr80.dll"/> <binaryImage start="0x12000000" end="0x121c7000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\xerces-c_2_1_0.dll"/> <binaryImage start="0x00350000" end="0x00361000" type="__TEXT" path="C:\WINDOWS\system32\msvcirt.dll"/> <binaryImage start="0x00370000" end="0x003f2000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\ScCore.dll"/> <binaryImage start="0x7c9c0000" end="0x7d1d7000" type="__TEXT" path="C:\WINDOWS\system32\shell32.dll"/> <binaryImage start="0x00530000" end="0x005d3000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\ExtendScript.dll"/> <binaryImage start="0x771b0000" end="0x7725a000" type="__TEXT" path="C:\WINDOWS\system32\wininet.dll"/> <binaryImage start="0x77120000" end="0x771ab000" type="__TEXT" path="C:\WINDOWS\system32\oleaut32.dll"/> <binaryImage start="0x005f0000" end="0x008fb000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\amtlib.dll"/> <binaryImage start="0x5b860000" end="0x5b8b5000" type="__TEXT" path="C:\WINDOWS\system32\netapi32.dll"/> <binaryImage start="0x71ab0000" end="0x71ac7000" type="__TEXT" path="C:\WINDOWS\system32\ws2_32.dll"/> <binaryImage start="0x71aa0000" end="0x71aa8000" type="__TEXT" path="C:\WINDOWS\system32\ws2help.dll"/> <binaryImage start="0x4d4f0000" end="0x4d549000" type="__TEXT" path="C:\WINDOWS\system32\winhttp.dll"/> <binaryImage start="0x763b0000" end="0x763f9000" type="__TEXT" path="C:\WINDOWS\system32\comdlg32.dll"/> <binaryImage start="0x00910000" end="0x0091f000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\CrashReporter.dll"/> <binaryImage start="0x59a60000" end="0x59b01000" type="__TEXT" path="C:\WINDOWS\system32\dbghelp.dll"/> <binaryImage start="0x77c00000" end="0x77c08000" type="__TEXT" path="C:\WINDOWS\system32\version.dll"/> <binaryImage start="0x00930000" end="0x0093f000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\LogUtils.dll"/> <binaryImage start="0x00950000" end="0x00aa4000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\dvacore.dll"/> <binaryImage start="0x00ac0000" end="0x00b4c000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\ASLFoundation.dll"/> <binaryImage start="0x76bf0000" end="0x76bfb000" type="__TEXT" path="C:\WINDOWS\system32\psapi.dll"/> <binaryImage start="0x00b60000" end="0x00b66000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\PRM.dll"/> <binaryImage start="0x00b80000" end="0x00b96000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\ASLMessaging.dll"/> <binaryImage start="0x76380000" end="0x76385000" type="__TEXT" path="C:\WINDOWS\system32\msimg32.dll"/> <binaryImage start="0x74720000" end="0x7476c000" type="__TEXT" path="C:\WINDOWS\system32\MSCTF.dll"/> <binaryImage start="0x01a20000" end="0x01abd000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\amtservices.dll"/> <binaryImage start="0x01ee0000" end="0x01f17000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\adobe_caps.dll"/> <binaryImage start="0x77920000" end="0x77a13000" type="__TEXT" path="C:\WINDOWS\system32\setupapi.dll"/> <binaryImage start="0x77690000" end="0x776b1000" type="__TEXT" path="C:\WINDOWS\system32\ntmarta.dll"/> <binaryImage start="0x71bf0000" end="0x71c03000" type="__TEXT" path="C:\WINDOWS\system32\samlib.dll"/> <binaryImage start="0x76f60000" end="0x76f8c000" type="__TEXT" path="C:\WINDOWS\system32\wldap32.dll"/> <binaryImage start="0x01f30000" end="0x01f50000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\asneu.dll"/> <binaryImage start="0x01f60000" end="0x01f6b000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\Localeresources\en_US\WS.en_US.DLL"/> <binaryImage start="0x02080000" end="0x02103000" type="__TEXT" path="C:\Program Files\Adobe\Adobe Premiere Elements 8.0\AdobeUpdater.dll"/> <binaryImage start="0x5ad70000" end="0x5ada8000" type="__TEXT" path="C:\WINDOWS\system32\uxtheme.dll"/> <binaryImage start="0x605d0000" end="0x605d9000" type="__TEXT" path="C:\WINDOWS\system32\mslbui.dll"/> </binaryImageSet> </crash> <reproSteps> </reproSteps> </crashreport>

Where, and how, is PrE installed? When you launch it, are you running as an Administrator?
First, PrE wants to be installed competely on the C:\ and wants direct access to the My Documents folder. It also wants to be both installed and then launched from an Administrator account.
It is not designed (nor is the big-brother PrPro) to function in a fully networked environment. It will extract media, etc. from an NAS, or from a mapped networked drive, but it does not like to run under most networked environments.
It's my guess that there is something in this installation that it is not comfortable with. More details will likely help.
Good luck, and looking for the answers to the questions above.
Hunt

Premiere Elements 4.0 burn issue

Premiere Elements 4.0 with Windows XP (both pre-loaded on a Dell computer purchased new in 2007). I am able to create *.prel files with no problem and I had been able to burn projects up to 5-hr length to DVD with no problem until recently. Starting October 2013 I have frequently had difficulty burning to DVD; although I have successfully burned projects ranging from 45 minutes to 4.5 hours. Current projects are about 3 hours. I'd rather create two 4.5-hour projects rather than three 3-hr projects, but have not been able to get a successful burn of more than three hours lately. No 3D effects or still shots, just video clips from the same camera, so all those clips are the same format. There are one or two video files from a camera phone, but this file format had not prevented a successful burn in other projects. There are titles, and transitions between some clips. I get "media transcoding " error or "Elements has encountered a problem and needs to shut down" error. I have tried to save to folder, and export to avi or to mp3 file. These work arounds have never been successful for me. Is there some known, fairly recent (i.e. circa October 2013), Windows issue that interferes with Premiere Elements? It has been very difficult to debug these issues, since I always have to wait to kick off a new burn overnight, and only find out in the morning if it was successful.

mmcguire
Lots of questions....
1. Your mention of burn to folder failures seems to take the focus off your burner or disc at the core of your issue and focus it on the Timeline content and other Premiere Elements workflow related factors.
Premiere Elements 4 on any computer is a 32 bit application with all the resource limitations of 32 bit. So, I wonder about these large projects as well as burn to in that situation. Are you doing SD or HD projects? What are the properties of the video that you have on these Timelines?
Have you looked for pile ups of preview files, conformed audio, and conformed video?
What is the menu marker situation? Are Timeline menu markers in these projects? If so, have you checked the spacing between them? Are you using stop markers? If so, do you have one placed at the end of the last item on the Timeline?
Have you expanded the Timeline with the -+ slider to inspect the tracks for leftovers presenting as very thin vertical black lines scattered about? And, also looked for other irregularities, such as graps in audio or other, transitions placement, etc.?
If it were not for your burn to folder results, I would suggest looking at additionally
another batch of disc - what brand/type being used
burn to folder - taking the VIDEO_TS from the saved folder to DVD-VIDEO on DVD disc with ImgBurn
getting a new burner - maybe on the old, looking for firmware and/or driver updates
But none of them seems indicated by the problem description that you offer. And, any involvement of a NVIDIA video card in this equation does not seem indicated since the recent NVIDIA video card Premiere Elements display issue referred to has been specific since the start to Premiere Elements 10 users with NVIDIA video cards. There the fix for these users has been rolling back the video card driver version rather than assuring that they had the latest version of the video card driver.
http://forums.adobe.com/thread/1317675
Please review. We will be watching for further developments.
Thank you.
ATR

Premiere Elements 12 opens for admin users but not general users.

Error: Premiere Elements has encountered an error....Src\Core\Preferences.cpp-347
Windows 7 box.
Any suggestions? Users have rights to all Adobe folders...

Im facing more or less the same issue.
APE 12 was installed on a Windows 8.1 System as a bundle with Photoshop Elements 12.
Photoshop is able to run as expected. But APE 12 could never being started.
I recieved during the installation the request to register the product (but im not able to find it under my Adobe account til yet).
I could only once choose to start at next time without opening organizer popup but now I´m getting always
the message
"Premere Elements Debug Entry:
Premere Elements has encountered an error.
...\src\core\preferences.cpp-347
I tried to uninstall and reinstall.
I have updated Windows 8.1 to the newest available software fixes.
Also Quicktime is updated yesterday to the latest version.
I also tried to start APE by using the "start as admin" feature.
I have also tried to change the user permissions in the folder D:\Program Files\Adobe\Adobe Premiere Elements 12 as mentioned in other threads.
The used Windowws 8.1 client system is member of a Domain.
The user is a local administrator user and uses local ressources only.
I have also updated yesterday the Grafic Card Adapter driver for the installed
NVIDIA Geforce GT 440.
The Processor is INtel Core i7 870 @ 2,9 GHz (6 cores)
6 GByte Memory is installed.
I thought it would be feasible to download pathces for the software but I was not able to find such a place like it is known from other software vendors.
I would kindly ask for your support.

Transcoding Error Premiere Elements 10

Similar Messages

Maybe you are looking for