Transcoding the Analysis Problem with Audio

I submitted a previous problem regarding sound degradation on imported media.  I diagnosed my problem and uncovered what I feel is a serious fault in Final Cut Pro X.  The media was recorded in a very noisy environment.  I.e. hotel ballrooms.  This provides a lot of background noise.  Fans, electric pops, traffic noise and so on.
I had accepted the default option to analysis and fix the audio problems. IMHO, Final Cut tried to fix too much.  This produces a thin sounding often broken up audio.  Since the media was lengthy (50 minutes) it took about an hour to process.  Before the process completed working with the project was fine.  As soon as the processing completed the problem appeared.
So if you experience similar problems just import the media without the audio automatically fixed and do it manually.

No, just go into the controls and tweak it manually.  The analysis has to run anyway, may as well run it during import.

Similar Messages

  • Problem with Audio on HP Envy 6-1130sw (C6F62EA)

    Hello everyone.
    I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
    Thanks. 

    Hi piotrek1130sw,
    From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
    Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
    Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
    If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
    If neither driver works I will gladly follow up and provide any assistance I can.
    Please let me know the outcome.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Problem with Audio MIDI Setup using multiple accounts

    I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

    Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
    What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
    So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
    Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
    G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap.   Mac OS X (10.4.8)   mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

  • Two problems with audio clips

    Hello,
    I'm having two problems with audio clips:
    1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
    2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
    What am I doing wrong?
    Thanks.

    1. Drag the little hand on speaker icon to drag from
    the Viewer...
    Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
    2. It means your sequence settings don't match the
    properties of the source audio you're putting in it,
    and you either need to change the settings in the
    sequence, or render the audio.
    Ah, that would explain it. Thanks!

  • Premiere pro cc 2014 problems with audio

    I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
    Anyone else experience the same problems?

    Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

  • [Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

    Ok,let's go...
    I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

    thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've  tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1.  i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection.  i have 2 screenshots to show you:
    this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
    the other one is from everest corporate edition:
    both drivers marked with purple colour!
    i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
    i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
    thank you very much and i'll stay alert of your suggestions. by

  • Can't run itunes because it has detected a problem with audio configuration

    What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

    Some people have found the following works:
    Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
    http://docs.info.apple.com/article.html?artnum=93698
    Turn off antivirus/anti spyware
    Go to Control Panel>Add/Remove Programs>Change or Remove Programs
    Select iTunes, then click on Change, then select Repair.
    Restart computer

  • Problems With Audio/Picture Playback in Director

    I'm pretty new to Director and I want to refrain
    from getting into scripting for this simple task:
    I am animating frame by frame with no vectors. I put a .wav
    file in one of the sound channels and stretch it across the entire
    animation (few thousand frames) for a scene. Then, no matter where
    I am in the animation, when I press play the sound starts from the
    beginning.
    There is no way in hell I'll be able to sync lips with
    dialogue by playing the entire scene from the beginning every time
    just to see the sound synced with audio. I want to be able to play
    the same fraction of a second (several frames) while animating and
    KNOW WHERE IN THE SOUND I'M AT. I would have thought this expensive
    program would at least display the spectrogram or something, much
    less not play the audio from the beginning when I'm in the middle
    of the sound sprite. I've prerecorded the entire sound score in one
    Audacity file and exported it as a .wav to Director. I don't want
    to use any other sound channels or ques, etc.
    PLEASE HELP, and thank you.

    "DarrenDoesIt" <[email protected]> wrote in
    message
    news:gar7d8$1of$[email protected]..
    >I appreciate your help, but most of these websites assume
    you're
    >making some
    > flash vid or video game animation. I'm creating
    noninteractive
    > animation that
    > I'll later edit into scenes. The way I'm coming to
    understand it,
    > the source
    > of the problem is the way the program treats sound as
    measured in
    > time where as
    > the graphics/animation are measured in frames. Still,
    I'm convinced
    > its a
    > crock of sh#% and that the lack of this simple feature
    is there to
    > force you to
    > buy marker software. The program should either display
    the
    > spectrogram of the
    > sound or at least play the sound from the point in time
    that the
    > cursor is at!!
    Director is a program that can be used to make interactive
    multimedia
    and software.
    What you want is make a linear video.
    You are much better off with a video editing suite or
    specialised
    synch software.
    Start from here:
    http://www.dmoz.org/Computers/Software/Graphics/Animation/
    or here:
    http://www.google.com/Top/Computers/Software/Graphics/Animation/
    Or just click here:
    http://www.google.nl/search?num=50&hl=en&safe=off&sa=X&oi=spell&resnum=0&ct=result&cd=1&q= video+animation+editing+lip+sync+software&spell=1
    (all one line, copy paste if necessary)
    Good luck,
    Richard.

  • Problems with Audio in iPhone 5

    I Have a iPhone 5 and today beginning having problems with audio, I can't hear my calls or music, somebody have the same problem?...do you know how I can fix it?

    Do you have the side switch enabled - do you see orange on the switch above the volume keys.
    Make sure all your settings are turned up.
    Try a restart of the phone by holding the home and power button until it reboots
    If that does not work you can reset your settings by going to settings > general > reset > reset network settings and then reset all settings.

  • Problems with audio panning.

    Am having problems with audio tracks. For example: when capturing a clip where a person is talking, there would be 2 tracks of audio - one a radio mic (Track 1) and another mic (Tack 2)capturing ambient sound. I often delete the ambient track (Track 2) and am left with the the main audio from a radio mic (Track 1).
    The problem is when I open up the main audio track (Track 1) and pan the audio track from -1 to 0 or even to +1! It says it has done it but the sound still comes out of the left speaker.
    It is a very recent problem that I wonder may be something to do with preferences or settings.
    We have had no problems with the speakers at all.
    Thanks very much,
    Geoff

    You have your audio outputs set to 'dual mono', not 'stereo'.... go to:
    Sequence>Settings> 'Audio Outputs' tab > then highlight the 'Stereo' button, then click OK...
    problem solved...

  • Problems with audio programs after update to Maverics

    After updating to Mavericks on my Mac Mini there is problem with audio programs. I cant open iTunes at all, I click it and it disappear in a second. Also when I press play in GuitarPro 6 or in Vox player nothing happens. It just wont start playing. I really dont like this update.. and my mac is slower now. I cant downgrade my system back so this is really frustrating to me as a musician.

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • What is the exact problem with this file?

    Hi all,
    There is an old form , which was not in use from many days.
    Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
    When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
    FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
    The login button has the following code:
    DECLARE
      UNAME VARCHAR2(30);
      --USER_ID PARAMLIST;
      V_USER APUSERMA.USER_NAME%TYPE;
      V_PASSWED APUSERMA.USER_PASSWD%TYPE;
    BEGIN
    select user_CD INTO :GLOBAL.USER_ID from apuserma 
    where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
    AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
    :global.user_id  := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
    :global.compname := :compname;
    compnm(:compname);
    --USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
    call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
    exception
      when no_data_found then
      MESSAGE('Incorrect Username or Password.  Please Re-Enter');
      message(' ');
      RAISE FORM_TRIGGER_FAILURE;
    END;
    EXIT_FORM;
    When i tried to compile, i got error saying ,
    Error 201 at line 10, column 28
    identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
    I am not getting to know What is the exact problem with this file?
    Help me with this please.
    Thank You.
    Oracle forms builder 6i.
    Oracle 9i.

    Vijetha wrote:
    I also want to know what is the use of  win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
    What does it do??
    If i comment the following line , will it be a problem??
    :global.user_id  := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
    Because i commented the above line & compiled, so it is not giving any error now.
    So please tell me what win_api_environment.read_registry does??
    it's read windows registry value. So, no problem if you comment it.
    Thanks

  • I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

    I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

    Applications should not disappear all by themselves.
    If they are then that coud indicate serious problems with your hard drive.
    Backup everything up as quickly as possible.
    Using Disk Utility verify your system disk.
    Allan

Maybe you are looking for