Transction FBL3 called for item level drill down in GR55

Hi all,
We have a GLT0 Report in Report writer. The system correctly executes the report and displays account balance for the period. The Report calls T-code FBL3 for display of line items(report/report interface). But when we drill down, the line items are not displayed for the specific period or selection and instead displays the line items for the whole period. (upto date).
The report was copied from a different system and in the source system it was displaying the line items correctly.
Could you pl share any inputs for resolving this issue.
Thanks & Regards
Sri.

Hello
please check from which field the amount is pulled out in GLT0 table. If the amount is pulled out form the totals field ...then it might not show you what you wish to see.
Thanks
Sanjeev

Similar Messages

Reg: Calling Report in KPI Drill Down

Dear Friends
Is it possible to call report in KPI Drill Down. (This facility is available in Hyperion). So my client is expecting the same & what is solution
in this scenario. The report has different measure. For Example calculation of ROCE.
The report consists of PBT, Capital Employed details and want to see once press ROCE KPI.
Rgds
SriG

Les and Sri,
In version 7.5 there was a 'Mark this page' link in Reports and Dashboards in SSM but this disappeared in 10.0 and has not reappeared in 10.1. If this was there then you could create the report in SSM easily get the URL and use the Associated Link to link back to it.
I've had an enhancement request in the Ideas Place 'Mark this page in Reports SSM 10' D4651 for a long time and all votes would help to get this back!
Regards
Colin

Multi-level Drill Down

Hi All,
I have to develop a Dashboard that has multi-level drill down on Charts.
I am trying to figure out which is best practice.
1. Display all the charts on 1 screen
2. Display charts as they go down the drill path.
An example would be
Chart1 -> Chart2 -> Chart3 ->Chart4
In this case would it require a close button or Back button to take me back to first screen when I am 1 or more level down. What is the general practice?
Any Inputs are greatly appreciated.
Mucho Gracias!
Sam

Hi Anil,
Your idea was quite helpful. However, I am trying to dynamically hide/show a label based on the drill-down. The whole idea is to make it a close button as you suggested earlier.
Initially the first screen should become visible with a chart. When a chart bar is clicked then second chart should be visible with close button on the top while the first chart becomes hidden. After clicking close, chart 1 is visible and chart2 is hidden.
Any idea how to achieve this.
Right now I tried to dynamically hide/show label but when I preview it is always showing. I have set the dynamic status and key to what the chart drill down will insert and for that I have a row insert with 1 and 2. This is not working.
Thanks for your earlier response.
-Sam

Issues in building two level drill down

Hi All,
I have built a sample two level drill down dashboard using two combo boxes which filters the data after each drill. I'm facing three issues here.
1.
I have placed both combo boxes behind 3rd chart but it's visible while I'm on 3rd chart as shown below.
2. When we click on chart two, it inserts the data(item on which we have clicked) into a cell. The second combo box uses the data in that cell an filters data in chart2 and serves to chart3. If I'm not using(visible in above image with ##) a grid to see the data in that cell, the back button being shown on chart 3 is not working(It goes back and comes to chart3 again immediately).
3. I'm hiding the combo boxes using dynamic visibility (with such condition that never gets satisfied) since I do not want to show those combo boxes to user. But, this also affecting the drill. I'm not able to see any data in chart2 which was visible when I didnt hide the combo box1 with dynamic visibility. Do dynamic visibility also hides functionality ?? I don't think so because it is pushing the label selected into a cell which I was observing.
Please help.

Hi Nikhil
The xlf you sent had one of the Pie charts as the most top component in the list and hence it was showing up. The order was not same as the screenshot.
Once I moved the combo-box to back it worked fine.
The Dynamic visibility makes a component inactive or active = not just visible to eye. So if you make it invisible it will not function too. So dont make the Combo boxes invisible. They need to stay visible when they need to work. So you have to use the chart's background or an actual background to hide it.
Why the grid helps - very strange I think it picks up the blank and inserts there again. Not sure. But Pie or any chart without the ability to bind the Item Selected - behaves this way - once you have clicked a value it remains clicked so even when it went invisible and came back to visible it remembers the selection. Thats why soon after BACK inserts blank in cell B7 the Pie chart 2 inserts the last selected value there and changes the logic.
You seem to have solved a huge problem by using the grid. So keep that in place and hide it behind a background.
Thanks
Runali

Tax classification screen for item level not appearing in sale order under Billing Doc tab

Hi Expert
while creating sale order Tax classification screen is not appearing for item level under Billing document tab.
Tax classification for customer and Material has already maintained. Tax classification screen is not appearing for USER but same time from our USER ID we can able to see that screen.
please help in above issue. is this related to Authorization issue or other thing need to check.
Regards
Pash@SD

Hi,
As per standard in Sales Order Document you will be able to see the Tax Classification fields in Billing Tab at Header level (for Customer Tax Classification) and at Item level for (Material tax Classification). The values from Customer M<aster is not populated at Header level as per standard but you can populate the value by using the Exit. Material tax classification populated from material master as you can see that at item level.
If for one User you are able to see and for other you are not able to see, kindly check first whether both are using same customer and material, and if yes, then check the User Exit.
Thanks and regards,
Amitesh Anand

Unable to Multi Level Drill Down on Single Data Object in BAM Report

Hi,
We need to have multi level drill down in a BAM report.
We are able to create single level drill down using 'Collapsed List' view in a Tiled Report, but unable to drill further.
We are using BAM (11.1.1.2).
Please let us know the steps to do this, your input is highly appreciated.
Thanks,
Arijit
Edited by: user2917352 on May 4, 2011 11:21 PM

Have you used Dimension? By defining Dimensions, you can create multi level drill down on the same data object, in the same report.
1. Define the Dimension in the data object
2. In the Studio, choose Drilling tab under the report
3. Drill Hierarchies will be available. Choose the Dimension
The drilling level will depend on the depth of the Dimension you have specified!
-AR

Action Link in obiee 11g for a Hierarchy Drill Down Level

Hi
Requirement is:
We have a Time Dimension Hierarchy with drill down Levels(Year, Qtr, Month, Day). So now i wanted to provide an action link on detailed column(day) which will navigate to other report. I have tried doing it but unable to get the actual solution.
Can anyone throw some ideas on how to achieve this.
Thank You

Hi,
Can u tell me whats the error you r getting over ther,
Use the hierarchy flow, starts with the + symbol,
edit the column properties and go for interaction tab and give action link + drill
check the columns between the 2 reports and assign prompts between the reports then you can get the correct one.
Regards,
VG

Linked report from second level drill-down level

Hi,
I have a report with two drill-down levels, Dept Id and Job Id.
The requirement is when I am on Job Id drill level; I have to call another report when I click on any of the Job Id. This Job Id is passed to another report and the report is filtered based on that Job Id.
I created a hyperlink on Job Id drill down level successfully. But the problem is I am unable to go to the first level i.e Dept Id. Actually the hyperlink is displayed and the up arrow is not visible to go to the first level.
Is there any way where after creating a link on second level and opening the report in a new window, the drill up functionality can be maintained?
I am using Business Objects XI 3.1 version.
Thank you.

hi
there is another way to drill down the report of web intelligence.for that we have to customize in the universe level create a folder in custom hierarchy and add your two objects to that folder, i.e empid. and deptid. the order of these objects should be in the way the drilling happens that means if you want to drill down from empid. to deptid. then empid. should be the first object of the folder,save and export the universe to the CMS.Then it ready to use for webi report.Build the query for the report and enable the drill option in the report.Now the report is ready for your requirement.
thanks & regards
Sreekanth K

Unable to call a form from drill-down report

hello
i have a drill-down report, from where i wanna to call a transacation level form, so that user can modify the data from that transaction level form after seeing the result from report. After modification in data through form, report should be refreshed automatically.
i am using form6i, can't user dde.app_begin because it starts a new session

Hi,
if this is for Forms on the web, just call the Reports from web.show_document() when closing the Forms (assuming you close the Forms after the update).
If it is on client/server then you don't have a hook into Reports except you run a new Reports from Forms and close the Reports that called the Forms application (needs to be done within this Report)
Frank

Drill-down to line items in drill-down report (FGI0)

Dear All,
I have a problem regarding executing drill down report in FGI0
When executing the drill down report FGI0 , I try to drill down to the line items from Goto-> line items but it's deemed & I can't run it.
I searched a lot and found only one link but didn't help
Customized drill-down report cannot go to line item level (FGI4 and FGI1)
Please help as it's very important issue

this is due to authorisation limit.
Ithink you do not have the access to view the 2009 GL balances.

Function Module For Item Level Details of a Sales Order

Hi Guys,
I have to get the item level details for a particular sales document no ..I want to know if there is any function module existing for the same.
Also I need any function module for getting the contact information such as contact form (KNVK-ANRED),contact name(KNVK-NAM1),contact name(KNVK-NAMEV),Contact number (KNVK-TELF1).
Please let me know if anyone is aware of it.
Thanks in Advance,
Mayank

SD_SALES_DOCUMENT_READ Reads sales document header and business data: tables VBAK, VBKD and VBPA (Sold-to (AG), Payer (RG) and Ship-to (WE) parties)
SD_SALES_DOCUMENT_READ_POS Reads sales document header and item material: tables VBAK, VBAP-MATNR
SD_DOCUMENT_PARTNER_READ partner information including address. Calls SD_PARTNER_READ
SD_PARTNER_READ all the partners information and addresses
SD_DETERMINE_CONTRACT_TYPE
In: at least VBAK-VBELN
Exceptions: NO CONTRACT | SERVICE_CONTRACT | QUANTITY_CONTRACT
SD_SALES_DOCUMENT_COPY
RV_ORDER_FLOW_INFORMATION Reads sales document flow of sales document after delivery and billing
SD_SALES_DOCUMENT_SAVE create Sales Doc from the copied document
SD_SALES_DOCUMENT_ENQUEUE to dequeue use DEQUEUE_EVVBAKE
RV_DELIVERY_PRINT_VIEW Data provision for delivery note printing
SD_PACKING_PRINT_VIEW
SD_DELIVERY_VIEW Data collection for printing
called from RV_DELIVERY_PRINT_VIEW, SD_PACKING_PRINT_VIEW
RV_BILLING_PRINT_VIEW Data Provision for Billing Document Print
regards
vinod

Third level Drill Down report

Hi,
I have a requirement to create the report using Crystal Reports 2008 up to 3 levels of drill-down. I tried to create it but I can create up to only 2nd level of drill-down.
Is it possible to create 3rd level of drill-down. If yes, please let me know how to create it.
Thanks in advance.
Regards,
Neel.

Hi Neo,
I use on-demand sub-reports.
Example:
If main report is for Customer summary which shows the amount received from customer.
Then for 2nd level of drill-down I will insert an on-demand sub-report. This sub-report will show the sales order numbers for that particular customer.
Now for third level of drill-down, I want show the details of sales orders (i.e., all the sales order lines of that particular sales order). So I am trying to insert a sub-report in existing sub-report, but here the sub-report option in the menu is already disabled.
Regards,
Neel.

Enable change logs for item level of Sales Document

Hi,
On transaction VA02, additional screen field (Booking Date) is added (& consequently 2 appends with date field in the tables VBAK & VBAP).
When this date is changed in the header, the corresponding dates are changed in the item level as well.
However, the change documents are created only for table VBAK (though item data is updated in VBAP also).
When the date is changed at the item level, the change logs are created for the corresponding field in table VBAP.
The data element has 'Change Document' checked.
How can I activate the change to be logged for the item level (VBAP), when the date is changed at header level (VBAK)?

Hi Nidhi,
Maybe set a breakpoint in include MV45AF0C_CHANGE_DOCUMENT_CREAT
Then check in UPDATE debug mode the value of upd_vbap and the contents of xvbap which are passed on to function VERKBELEG_WRITE_DOCUMENT .
This function creates the change documents based on the data changes.
I would have thought that since the date values are changed at item level as well when you only change it at the header, they should get a change document created automatically, since the dates must be in the XVBAP table (as their value is changed at the DB).
So I would compare the various internal tables for both scenarios (header change, item change) to determine their differences.
After this use one of the user-exits to populate the internal tables for the header scenario based on the values of the item scenario. I would feel this to be a last resort though, since something appears not to be working correctly (I think).
Hope this makes sense,
Robert

Authorization object for item level

Hi,
Is there an authorization object for item categories for business transactions.
Actually our need is that partners at item level should edit the documents. Authorization objects CRM_ORD_OP and CRM_ORD_PR are not success this need.
Regards.

Thanks!
I added with full authorization and still do not get any roles displayed.
Any other ideas?

Access Tab not showing for item level security

I have enabled item level security for the portal page I am working on, but the access tab for the items is not showing.
I have come accross exactly the same problem on this forum and the advice was:
Hi try the following :
go to page properties
set the item level security
clear the cache
clear your browser cache
it should work "
I have tried all that, closed and opened a browser but the access tab is still not showing. This is a 10.1.4 portal on LINUX. Starnge enough I have a testing environment installed on my Windows XP (AS 10.2.0.2 not upgarded to 10.1.4) and I don't have any issues with item security access tab at all.
I would appreciate any clues.
Regards,
Anna

There should be two icons shown for each item when you put the page in Edit mode - Edit and Actions. Click on the Actions icon and "Access" should be one of the links in the list of actions (like hide, expire, delete, move, etc.)

Transction FBL3 called for item level drill down in GR55

Similar Messages

Maybe you are looking for