Transfer addition information from Sales Order to Production Order

Hi,
In MTO we need to transfer addition information from sales order to production order, such as OUTER DIAMETER and INNER DIAMETER of the product.
Regards,
Ahmed

Hi Ahmed,
Specific information from sales order in MTO process if you want to pass onto the production order then as suggested by expert production memo can be used.
Follow below steps.
Select the item in the sales order and Goto -> Item -> Text as displayed below
Create a production memo by specifying the language key as displayed below.
Once you create production order against the sales order - In production order you can see the text maintained. CO02-Menu Bar - Header -Production Memo
Thanks & Regards,
Ramagiri

Similar Messages

Transfer Partners Information from Sales order to Purhcase Requisition

Today we create a Ship Direct Purchase Requisition directly from a Sales Order. The Partner information is entered on the Sales Order, however this does not get transfered to the Purchase Requisition. Ideally, we would like one of the Partners that is entered on the Sales Order to be transferred to the fixed vendor on the purchase req. Is this possible, and if so can you help identify how this needs to be set up in configuration?
If this is not possible, can we transfer the partner to the Requisition and/or PO?
We appreciate any guidance! Thank you.

the purchase requisition does not have any partners.
Only the address of your ship-to is flowing into the delivery address.
And the Sales order number is going to the account assignment.
SD module does not decide about the vendor, this decision is made by purchasing using their master data like source list , info record , contract or quota arrangement.

Restrict transfer of requirments from Sales Order to MRP.

Hi Friends,
I have a requirement where in I have to stop/restrict transfer of requirements from Sales order line item to MRP.
Generally, If the material in Sales order is for Internal production then the Planned order it triggered in MRP and If the material is Externally Procured then a Purchase Req is triggered in MRP. The MRP run is carried out using Transaction code - MD03
Is there any technical enhancement where I can restrict the transfer of requirements to MRP from Sales order.
I know I can control it functionally by changing the schedule line category, But We need a technical development to do this as the user would not every time go to Sales order change and then change the schedule line Category.
Please Advise.
Thanks & Regards
Nayan Shah

Hi Nayan,
Please try user exits EXIT_SAPLMDR2_001/2/3 if it helps.
Regards,
Gaurav

Copy from Sales Order to Production Order

Hi all,
Is there a way to copy direct a Sales Order to Production Order (probably for item with BOM).I am using SAP B1 2005
Thanks in Advance

Hello,
Currently you can choose relevant Sales Order from Production Order but only for information purpose.
I think you can try to use SDK to implement it.
Hope this helps.
Regards,
Maggie An
SAP Business One Forums Team

Transfer of material from sales order stock to subcontractor

Iam having subcontracting operation in routing. But i am not able to transfer of material from sales order stock to subcontractor when i do 541 movement

Dear Mayuresh,
You cannot move Sales Order assigned material directly to Sub contracting Vendor stock.
For doing so firstly unassign the Sales order stock by transaction MB1B & movement type 411E.
After this you can provide the stock to the vendor by transaction MB1B & movement type 541O.
Other way is to create account assigned Purchase Orders. Thereafter create virtual sub contractor storage location in your plant. Transfer your Sales Order assigned material to these Virtual locations so that you can see the stock provided to the vendor. Now during Goods Receipt of the finished goods you can consume the material by movement type 543E.
Regards,
Subha.

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

Delevery(Sales invoice) against Production Order

Dear All
In COOIS report can we check the Sales according to Production order.
Within a month can we check the booked sales of that particular order. (Not 1 by 1)
It should be commulative.
Rgds
Pankaj Agarwal

Pankaj,
You cannot see these informations in one report
i.e. sales order qty/delivered qty/production order target qty/GR qty/WIP qty. input being sales order creation date.
You need to refer to sales order VA05 to get sales order for a perticular month.
take this sales orders ifrom this report(click on the column and CONTROL C)
goto COOIS
in the sales order field, click multiple selection icon click on the green button(import from text file)
you will get import from local file screen, you click on "upload from clip board" icon...you will get the sasles orders and then you can get the details of thoses production orders for the saales order in that month.

I have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac and once the information is transfered how can I print it? Second: I have a large music collection in m

have 2 imac computers and here are my questions: first, how to I transfer the information from my contact directory from my old imac into my new imac? Once the information is transfered how can I print it? Second: I have a large music collection in my old Imac computer how do I transfer this information to my new computer? Also how can I share this information with other computers at home?

I think you may find helpful information here:
A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Transferring files between two computers using FireWire.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Sales order and Production order status

Hi Colleagues,
We need to use sales order status functionality, so that when sales manager set status , for example, "dont produce" a production order can not be released.
Has any one dealt with that?
Thank you.

Dear,
You can give the reason for cancellation of Sales Order item & block the sales order. When the sales order will get block it will get disappear from MD04 so in next MRP run if there is any planned order it will get deleted. But suppose by that time you had converted the Planned order in Production Order you will get Exception message no. 20 in MD04 list. So this means that there is no requirement & order should be cancel.
Still you want to have restriction of checking the Sales order is open or not, then i hope you are working in MTO scenario & every production order is created w.r.t SO. You can use following Exit in such case.
PPCO0021 Enhancement for Order Release
Exit - EXIT_SAPLCOZR_003.

List of Sales order and production order

I need the list of sales order and production order for the period 01.04.2006 to 31.12.2006

Dear Nau,
VA05 for list of sales orders and put Document date in Sales Order Data
COIO Process order information System
Regards,
Rakesh
Pls award points if you find the solution

Any stanard BAPI have both sales order and production order

hi Experts,
i need to Identify any standard BAPI have both sales order and production order. If such BAPI is not available, create 'Z' BAPI to do the same.it's my require ment?plz give me suggestion it's useful for my project. i will give good points.
thanks and regards,
bbm

hi eswar,
can you give me how to do? and what i can use import,export,table and sourcecode bcz i am new in BAPI side even now i am working in SAP XMII project.
so plz guide me.
thanks and regards,
bbm

Need help trying to transfer my information from one iphone to another

need help trying to transfer my information from one iphone to another

If you are restoring from an icloud backup you are going to have to erase a content and setting and while in the setup prompts you will get the option to restore from an icloud back...that's the only time you will get the option to restore from an icloud back and that's during setup

Rescheduling Sales Order vs Production Order (Components)

Hi gurus,
Transaction V_RA rescheduling sales order with different filters.
We need a transaction similar to V_RA that rescheduling sales order and production order (for availability check of components). Does it exist??
I will reward points to all answers!
Thank you!

Daniel,
It all depends on the business policy of each client. In our case, it was decided that in case Production orders and Sales orders compete for the same material, we will give priority to sales orders. Hence, we changed the timings of the nightly jobs. The backorder job was run first, so that stock was committed there first. Balance if any could go to Prod orders.
But again, that depends on the strategy of your company.
Ashutosh

Relation between Sales order and Production order

Hi,
In Make to stock scenario how the relation between Sales order and production order are related.In which table we will get the related fields (expect AUFK,VBAK,AUFO).
warm regards,
Surendar reddy.

The relation between sales order and prodution order is as follows.
Pass AUFNR to AFKO/AFPO Get AUFPL.
Pass AUFPL to AFVC Get BANFN.
Pass BANFn to EBAN Get EBELN.
Hope this works .
Cheers,
Lakshmi Prasanna Gandham

Overhead rate maintained sales order aswellas production order

Hi Guru,s
My Client using overhead rates in a particular costsheet for SD and PP.The overhead rate maintained a particular profit center.these particular profit center maintained sales order aswellas production order.In this case we need to calculate costing for sales order only for this profit center not production order.Any setting required to ovecome this problem.Could you plz help on this regards,
Thanks&Regards,
Prakash.

Hi,
There is no specific setting is reqd. If u want to calculate the overheads for production, then u need to define the base % and the overhead key. But in sales order you need to maintain the condition type. This will take care of your reqmt.
Regards,
V. Suresh

Transfer addition information from Sales Order to Production Order

Similar Messages

Maybe you are looking for