Transfer and log with mixed formats (Canon 5D and Panasonic GF1)

I've transferred and logged files from 2 cameras (Canon 5D and Panasonic GF1).
Everything was brought in at Apple Pro Res.
I was surprised to find that I could edit 25 FPS video (from the Canon 5D) in the timeline with the GF1 (the GF1 shoots at 30 FPS).
Am I missing something here? I thought that I'd have to go through an extra step to get them to work together, but everything seems fine.
Also, the GF1 is at 720.
Is it going to look bad or not edit well together in the timeline later?
I'm new at this FCP tapeless thing. Should I be worried about how I brought this in?
Cheers,
dugmore

Although fcp will mix framerates in the same timeline, you will not get the best quality letting fcp make "automated" decisions. If you're happy with the way they look, you may be ok, but I would do a test in the final form your program will be taking. So if you're end use is a video for the web with specific settings, do a test export. If you are going to be outputting in an interlaced format, do a test and view it on an interlaced monitor, in this format as this is an area where you may see problems.
Also, there might be problems if you are going to finish your audio in another program dealing with material in varying frame rates.
Personally, I almost always convert all material to one format (codec, pixel dimensions and frame rate) before editing. It's just safer. Although things will sometimes work ok without doing this, you are taking chances.
If you decide to do the conversion, I'd recommend doing it in compressor where there are options in "frame controls" and "geometry" which will give you tremendous control over the quality.

Similar Messages

I have coverage with mixed formats - some with PAL ( we think 4:3 ratio) and some HD. When I chose

I have coverage with mixed formats - some with PAL ( we think 4:3 ratio) and some HD. When I chose our sequence settings to begin with, is there a way of preventing some shots with bars either at left and right or top and bottom?

Choose PAL 4x3 and scale down the rest.

DVD Studio Pro crashes when accessing folders with mixed formats

DVD Studio Pro 4 on Mac Book Pro OSX 10.6.8
Program crashes whenever accessing my movies directory. It contains mostly HD content in MOV format. There are some MP4 and M4V in there too.
To check this I copied an MOV, MP4, and M4V into a separate directory. I added this folder to the Video tab of the Palette in DVDSP and same crash occurs until I remove all but MOV content.
Project setting is 1920 x 1080 HD. I have successfully imported several assets in MOV format.
My question is why would DVD Studio Pro crash just because it is pointed to a directory with mixed formats? Would it not just ignore to incorrect formats and move on? Why the crash if I am not trying to import them?

I was going to let this go doc, but....
I discovered the crash by accident while doing Ripple Current training - yes I am a complete DVD SP newbie! Anyway my story: Oh look! There is an icon pointing at my Movies directory in the Video tab. Gee thats cool lets see what is in it. Ooooh s&*t the program just crashed! That can't be right, lets just try it again. Now thats just wrong! I'll beat this thing so lets experiment. Lo and behold its a mixed format problem. Why doesn't DVD SP just ignore any unrecognized formats like any other program? Hmm, being the newbie I am, and there was no hint in the Ripple training, I would ask the docs on the Apple forum. They will know why and what to do!
DVD SP seemingly by default maps my Movies directory. My Movies directory has multiple formats in it from years of use. I have movies for my iPhone, iPad, movies for Vimeo and iTunes, as well as other distribution formats in the same directory. I also have been experimenting with different codecs. My Movies directory has been used as an Internet distribution point. So please excuse me if I did not clean out my Movies directory before launching DVD SP! Little did I know this would even happen. If I could "unmap" this selection permanently I would - do you know how to do this? So far I cannot find any preference for it.
In a round-about way you got there, however so did I on my own - isolate the project to its own directory and NEVER pick on the "Movies" icon. I am not satisfied since it would be really nice to block this from ever happening again. God forbid an incorrect format should ever sneak into the sacred project directory "sorry but DVD SP and incorrect formats don't play nicely", so stop doing that!

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync.

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync the applications we have.

An iPod can pn;y sync wiht one iTunes kibrary and the new computer is a new iTunes library:
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party probgram like one of those dicussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Logging with whereabouts using open source and freeware

You can find the html version of this at:
http://www.acelet.com/whitepaper/loggingWithWhereabouts.html
Logging with whereabouts using open source and freeware
The purpose of logging is to find out what had happened when needed. When the
time comes to read log messages, you want to know both the log message and its
whereabouts (class name, method name, file name and line number). So you need
to hard code whereabouts.
But hard coded whereabouts are very difficult to maintain: when you modify your
source code, line number changes; when you copy and paste a line, its class name
and method name change. If whereabouts are wrong, you introduce bugs in your logging
logic and the log messages are useless at the best.
This article shows you an example of using freeware Redress tool to rectify whereabouts
programmatically in your Makefile or Ant build file. So your whereabouts are always
correct for both Java and JSP source file.
Redress tool is part of SuperLogging at http://www.ACElet.com. SuperLogging also
provides an open source wrapper Alog.java, which redirects log method calls to
your favorite logging package. Redress tool can rectify whereabouts information
on all Alog's method calls in your application. So, if you call Alog's log methods,
these calls will be rectified by Redress.
JDK 1.4 introduces a new utility package java.util.logging. The example in this
article is based on JDK logging. Log4J is a cousin of JDK logging. Log4J users
should have no difficulties to modify this example for Log4J. Both JDK logging
and Log4J are excellent logging software for single JVM.
Note: Redress tool rectifies method calls on Alog, not JDK logging. You need to
call Alog instead of JDK logging in your application.
Source code of Alog.java
The following is the source code of Alog's JDK logging version. It serves as an
library file and should be on your CLASSPATH:
* Copyright Acelet Corp. 2000. All rights reserved
* License agreement begins >>>>>>>>>> 
* This program (com.acelet.opensource.logging.Alog) ("Software") is an
* open source software. 
* LICENSE GRANT. The Software is owned by Acelet Corporation ("Acelet").
* The Software is licensed to you ("Licensee"). You are granted a
* non-exclusive right to use, modify, distribute the Software for either
* commercial or non-commercial use for free, as long as: 
* 1. this copyright paragraph remains with this file. 
* 2. this source code (this file) must be included with distributed
* binary code. 
* NO WARRANTY. This comes with absolutely no warranty. 
* <<<<<<<<<< License agreement ends 
* The purpose of releasing this open source program is to prevent vendor
* lock in. 
* You can code your program using this class to indirectly use Acelet
* SuperLogging (com.acelet.logging). If later you want to swith to other
* logging package, you do not need to modify your program. All you have
* to do is: 
* 1. modify this file to redirect to other logging packages. 
* 2. replace existing com.acelet.opensource.Alog with your modified one. 
* 3. you may have to reboot your EJB server to make the changes effect. 
* 
* This program is just a wrapper. For detail information about the methods
* see documents of underline package, such as com.acelet.logging.Logging.
* 
* Visit http://www.ACElet.com for more information.
* 
* This file is a modified for using JDK logging as an EXAMPLE.
* 
* You can use Redress tool to keep your whereabouts information
* always correct. See http://www.ACElet.com/freeware for detail.
* 
* Please see http://www/ACElet.com/opensource if you want to see the
* original version.
package com.acelet.opensource.logging;
import java.util.logging.*;
public final class Alog {
* Log level value: something will prevent normal program execution.
public static int SEVERE = 1000;
* Log level value: something has potential problems.
public static int WARNING = 900;
* Log level value: for significant messages.
public static int INFO = 800;
* Log level value: for config information in debugging.
public static int CONFIG = 700;
* Log level value: for information such as recoverable failures.
public static int FINE = 500;
* Log level value: for information about entering or returning a
* method, or throwing an exception.
public static int FINER = 400;
* Log level value: for detail tracing information.
public static int FINEST = 300;
static Logger logger;
static {
logger = Logger.getLogger("");
public Alog() {
public static void alert(String subject, String message) {
public static void error(String text, int level, String fullClassName,
String methodName, String baseFileName, int lineNumber) {
String[] para = {lineNumber + "", baseFileName};
logger.logp(getLevel(level), fullClassName, methodName, text, para);
public static Level getLevel(int levelValue) {
if (levelValue == SEVERE)
return Level.SEVERE;
else if (levelValue == WARNING)
return Level.WARNING;
else if (levelValue == INFO)
return Level.INFO;
else if (levelValue == CONFIG)
return Level.CONFIG;
else if (levelValue == FINE)
return Level.FINE;
else if (levelValue == FINER)
return Level.FINER;
else if (levelValue == FINEST)
return Level.FINEST;
else
return Level.ALL;
public static void log(String text, int level, String fullClassName,
String methodName, String baseFileName, int lineNumber) {
String[] para = {lineNumber + "", baseFileName};
logger.logp(getLevel(level), fullClassName, methodName, text, para);
public static void sendMail(String to, String from, String subject,
String text) throws Exception {
public static void sendMail(String to, String cc, String bcc, String from,
String subject, String text) throws Exception {
Test program
The simple test program is Test.java:
import com.acelet.opensource.logging.Alog;
public class Test {
public static void main(String argv[]){
Alog.log("Holle world", Alog.SEVERE, "wrongClassName", "wrongMethod",
"wrongFileName", -1);
How to run the test program
1. Compile Alog.java (JDK 1.4 or later, not before):
javac Alog.java
2. Download freeware Redress tool from http://ACElet.com/freeware.
3. Run Redress tool:
java -cp redress.jar Test.java
4. Check Test.java. The Alog.log method call should be rectified.
5. Run test program:
java Test
You should see log message with correct class name and method name.

Hi;
I found this code and would like to share it with you :
JCoDestination destination = JCoDestinationManager
.getDestination(DESTINATION_NAME2);
JCoFunction function = destination.getRepository().getFunction(
"RFC_FUNCTION_SEARCH");
if (function == null)
throw new RuntimeException("RFC_FUNCTION_SEARCH not found in SAP.");
function.getImportParameterList().setValue("FUNCNAME", "*");
function.getImportParameterList().setValue("GROUPNAME", "*");
try {
function.execute(destination);
JCoTable funcDetailsTable = function.getTableParameterList()
.getTable("FUNCTIONS");
int totalNoFunc = funcDetailsTable.getNumRows();
if (totalNoFunc > 0) {
for (int i = 0; i < totalNoFunc; i++) {
System.out.println("Function Name: "
+ funcDetailsTable.getValue(i));
} catch (AbapException e) {
System.out.println(e.toString());
return;
System.out.println("RFC_FUNCTION_SEARCH finished");
It is working and retrieving FM.
Regards
Anis

Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)?

Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)? If not, which versions can? Thanks!

Hi Sami,
You can open files with mixed page orientations in all Adobe Readers There is no such constraint on opening files with different page orientations in Adobe Readers.
In case if you have any other query please let us know. We will be happy to assist you.
Regards,
Aadesh

My phone and computer are mixing up my mom and sisters contacts. whenever i text my sister it sends it to her and my mom or vice versa. whenever i get a tex from my sister it says that i have gotten a text from my mom on the notifications. How do i fix it

My phone and computer are mixing up my mom and sisters contacts. Whenever i text my sister it sends it to her and my mom or vice versa. Whenever i get a text from my sister it says that i have gotten a text from my mom on the notifications. How do i fix it?

The SIM card included with an iPhone 4S that is activated with Verizon is not used to access Verizon's network. The SIM card is used when roaming internationally - to be used with a GSM carrier in another country at Verizon's international roaming rates - with a GSM carrier in a country that Verizon has a roaming agreement with.
An iPhone activated with Verizon can be activated with another Verizon account and line/number at a Verizon store, or this can be done over the air. When I was a Verizon subscriber many moons ago, any CDMA phone I had activated with Verizon would be done over the air without having to visit a Verizon store.
Regarding your MBP, you can perform an erase and install with the OS X install package that shipped with the Mac when new. This way it will be like opening the Mac for the first time for her. She will get the setup assistant to set up the computer with her name, address, and email address, etc. along with capturing a photo of her if she wants. After she goes through the brief setup assitant, you can run Software Update to get OS X and all includes apps up to date. She can then authorize the MBP with her iTunes account with iTunes. The iPhone can the be restored with iTunes as a new iPhone.

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day!

I was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

i was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?

Launch Mail.
Start "New Message".
Click "View" in the menu bar and then "Customize Tool Bar".
Customize Toolbar sheet should drop down.
At bottom left there is "Show" pop up box, click it and select "Icon and Text".
Click "Done".

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

How do I reset my iCloud old inaccessible email and password with my new iTunes email and password currently working on a different device? Thanks for any suggestions ,

TThat's the problem. I've tried to delete the current icloud account but in order to that you need to put in the old password which I don't have so it kicks me out.

If i make my own cloud and log out of the one me and my sister were sharing will she still get my messages ?

if i make my own cloud and log out of the one me and my sister were sharing will she still get my messages ?

Answered in your other post.

Cannot print watermark and Annotation with a combination of OS and application software you use printing is cancelled

cannot print watermark and Annotation with a combination of OS and application software you use printing is cancelled

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

For some reason , when i access the cloud , it has duplicated a playlist over and over , with no songs in it and i cannot remove it , can you help ?

for some reason , when i access the cloud , it has duplicated a playlist over and over , with no songs in it and i cannot remove it , can you help ?

This post will sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

Need to retransfer EOS footage logged with v1 of Canon E1-Plugin with v1.1

I am using Final Cut Pro 7.0.3 with OS X 10.6.5 (same problem existed with 10.6.4). I have a project that contains footage from the Canon 5D Mark ii and 7D. This footage was logged inside Final Cut using v1 of Canon's E1-Plugin for Final Cut Pro. Under v1 of the plugin I could take my media offline and then retransfer by selecting the offline clips in the browser and going to Batch Capture...
This workflow still works after updating to v1.1 of the Canon E1-Plugin, but only for footage originally transferred with v1.1. Any project that I logged under v1 of the plugin will not retransfer. The log and transfer window reports that volumes are missing. Trying to manually add the volumes or search for volumes does nothing.
If anybody has found a solution or has any suggestions for this problem I would appreciate your help. Thank you!

Same problem here, with the added complexity that we have a large number of projects shot and processed over the the last year, so that the projects have some media that was processed with v1 of the plugin and some that was processed with v1.1.
We have found that v1.1 will not batch capture footage that was originally captured with v1, and v1 will not batch capture footage that was originally captured with v1.1. This basically renders our previously smooth workflow into a complex process where we have to install the v1 plugin (luckily we happened to find an old version, since it's no longer publicly available), capture the v1-originated footage, uninstall the v1 plugin (not very elegant, involved tracking down the files buried in a plugin folder and deleting them), reinstall the v1.1 plugin, capture the v1.1 originated footage, rinse, repeat. Ugh.
The irony is that the only reason we installed v1.1 was for the promise of multi-core processing, so that we could process the footage any faster than 2x the duration of the clip on our 8-core machines. Sadly, v1.1 doesn't even deliver there - still takes 2x realtime to process our DSLR footage.
Anyone out there come across a solution? We've tried trashing preferences and reinstalling in various orders, with no luck.
It's maddening to have the reel mounted in Log and Transfer and to be told by the plugin in that "the volume is missing"

Transfer and log with mixed formats (Canon 5D and Panasonic GF1)

Similar Messages

Maybe you are looking for