Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC

Dear Experts
Please let me know  how to  Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanks

Hello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU.  For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu

Similar Messages

  • Extract data from SAP and send to external system via Webmethods & IDOC's

    Hi,
    We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
    Any pointers would be of great help. Thanks

    If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
    or
    take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
    if you are dealing with master data bit risky(correctness) but can be achived using PI.

  • Data Transfer from SAP to FAS(Financial Accounting System)

    Hi Experts,
         Can u give any methods for transfer of data from SAP to FAS(Financial Accounting System) system, because naming conventions  and data for both the systems are different.
    Thanks and regards
    BalaNarasimman

    You will need to create interface programs.

  • Transfer of data from SAP R/3 to XI using BAPI

    Hi All,
    there is an requirement, I have to transfer the Process Order from SAP to XI using standard BAPI objects BAPI_PROCORD_GETDETAIL, we can use ABAP Proxy to BAPI scenario.can anyone Please elaborate on this and help me to achieve this scenario .
    Thankyou

    Hi Swapnali,
    In your case you have to send process order to XI and you have a bapi that satisfies your requirement.
    Here the solution depends what is the triggerring point of the Interface.
    If you want that from SAP side Interface should be triggered, then Use ABAP proxy program
    You have to craete a Abap proxy class using outbound message interafce defined in IR of XI.This can be done by transaction SPROXY.
    Then create a program that call sync/async method that is created by Sproxy t.code.
    In this way , when u will execute the proxy program in R/3 , then call will be made to BAPI in Sap from XI server and u will get output back to your proxy program.
    If your requirement is to not to trigger from SAP then nothing is required in R/3 side.
    In XI , Bapi will be added in imported objects in Integration repository and bapi will be called.
    Hope this will help u.
    Please revert in case of queries.
    Regards,
    Monica

  • How to transfer vendor master from MM to SUS?

    Hi friends
    How to transfer vendor master from MM to SUS
    Are the following steps correct
    1.create vendor master in MM
    2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
    3.use BD15 in SRM to accept the master data from MM.
    Please let me know if i am wrong
    Thanks
    Vinny

    Hi Vinny,
    Please follow below steps for transferring vendor master from MM to SUS.
    !) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
    2)Go to BD14 and enter following fileds
    Vendor number
    Class
    Message type
    Target System...
    Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
    Before repliating vendor, please note that vendor root org unit has been created in SUS system.
    After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
    If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check  in SUS.....
    If useful points please...
    Thanks
    Ravi

  • What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi.

    What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi?

    If the Mac use Lion (10.7) you can use Airdrop for that.
    With Mac's not using Lion you may set up a computer to computer (ad hoc) connection.
    How to --> http://docs.info.apple.com/article.html?path=Mac/10.6/en/8339.html
    Lupunus

  • Help Please..Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned). How do I transfer the library from the 160 to the 80gb in iTunes using Windows Vista (ie merge the 2 libraries)? Thanks

    Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
    How do I transfer the library from the 160gb  to the 80gb in iTunes using Windows Vista.
    Nothing seems to help on the Apple support pages, so any help would be appreciated
    Thanks

    Thanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
    Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
    Any help or pointers greatly appreciated
    Thanks

  • I need to update my iphone software, but I get a message saying that I need to transfer my songs from my iphone to itunes first. There used to be a Transfer link on the summary page when I connected my iphone to my macbook, but I am unable to find it now.

    I need to update my iphone software, but I get a message saying that I need to transfer my songs from my iphone to itunes first. There used to be a Transfer link on the summary page when I connected my iphone to my macbook, but I am unable to find it now.

    Welcome to the Apple Community.
    Select the device from the device list, then file > devices > transfer.

  • I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

    I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

    Check the iPhoto preferences:
    From the main menu bar:  iPhoto > Preferences > General:
         "Connecting camera opens"  : Set this option to  "iPhoto".
    If that does not help, disconnect your iPhone and reset your iPhone.
    To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

  • I need help to transfer my movies from I tunes to an external hard drive please

    I need help to transfer my movies from I tunes to an external hard drive please

    Teach a man to fish, feed them for life.
    https://discussions.apple.com/message/16276201#16276201

  • HTTP connection from OSB web service to external system via a Proxy Server

    Dear experts,
    May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
    Thank you very much!!

    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
    Adding Proxy Servers
    Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
    1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
    2. Select System Administration > Proxy Servers.
    3. Click Add.
    4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
    5. In the Description field, enter a short description for the Proxy Server resource.
    6. In the Host-Port Parameters section, enter the following information:
    1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
    The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
    2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
    3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
    4. Click Add.
    You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
    7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
    These fields are optional, and required only if the Proxy Server is secured.
    8. Click Save to create and save the Proxy Server resource in the current session.
    9. To end the session and deploy the configuration to the run time, click Activate under Change Center.

  • Can we transfer customer master from ECC to SAP AII

    Hi Experts,
    We need to transfer the customer master data from ECC to SAP AII ( Auto-id system )  through XI system. There seems to be no std XI content for doing this ( there is std content for sending material master ). I have found out an idoc type BUPAFS_FS_CREATE_FRM_DATA201 in both ECC and SAP AII system. I think I can use this idoc for transferring the customer master. But how do i triggere this idoc whenever the cusotmer is created or chnaged?? ( like for MM we have BD10 transaction to do this )
    thanks
    sankar

    Hello,
    I do not get what is the sending message type and what is  the receiving message type.
    The MaterialIn Message Type in AII is used when you do replicate material master data from ERP to AII.
    In ERP You sent IDOC Matmas01 or AINMatmas ( I am not exactly sure about the name, but it is contained in the configuration guide for flex delivery scenario.
    When in this replication the gtin field is not populated.
    Check the following:
    open master data -> product in AII and check if you do have a table containing UOM and GTIN displayed for existing product or that you can create your own product and defining UOM and gtin for that.
    If this is not possible, you have not maintained the relevant set type and product configuration in AII. This is stated in config guide again.
    Michael
    Now I will be  off  for two weeks with no access to internet. Hope that helps.

  • SAP MDG and article master in SAP IS-Retail

    We need a solution, where external vendors can contribute with article information, the master data persons can enrich the vendor information, and where the articles can be created appropriately afterwards in SAP ERP.
    SAP Master Data Governance (MDG) seems to be the right solution for standard SAP. And SAP MDG has also been described in enhancement packages for SAP Retail since at least ECC 6.05, Nevertless previous discussions such has MDG-Material and IS-Retail  indicate that SAP MDG is not appropriate for SAP Retail.
    Please contribute with your considerations and experiences: Is MDG appropriate for article master data maintenance in SAP Retail?

    Hi Sune
    The thread you are refering to is quite old, there is a solution available now for doing retail master data governance on SAP MDG. This is offered as a consulting solution now.
    The data model itself is modelled after the IS Retail data model for Article master and would leverage on the data governance capabilites offered by the MDG framework.
    It is not exactly a supplier portal for data exchange but there have been architecture discussions on using a 'lean' version of the data model as a vendor facing portal and seperating this from internal facing MDG for enriching the ERP specific parts of the article master data , before governing and commiting to the ERP system.
    If you are interested in talking more about it would be happy to do so.
    Regards
    Dilip

  • How to transfer sales bom from SAP R/3 to APO?

    Hi Experts,
    I just want to ask how to transfer sales bom from R/3 to APO? if i change my bom usage to 5 and use this BOM in my Production version be enough to send it to APO?
    Also, this is my first time using sales bom, could you please help me understand how sales bom work in APO planning?
    Thanks so much.
    Mylene

    Hi Senthil,
    Thanks again for your reply. I was trying to CIF sales BOM in APO but only the header material are being created in APO. The component are not added in PDS. This is how I create it in SAP R/3:
    1. transaction cs01 -->  enter header material, plant and BOM USAGE =5
    2. inside cs01, i entered components, quantity for each components and ITEM category = L (stock item)
                            i also eneterd base quantity for header material
    3. create production version for header material with routing and this BOM
    4. create and activate material CIF model for header and components
    5. create and activate PDS CIF model for header and components.
    After doing all these steps, PDS is created in APO but I only have the header material (no components)
    I tried changing BOM to other bom usage and components were populated in PDS.
    Am i missing nay steps?  Thanks.
    Regards,
    Mylene

  • Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

    Hello,
    We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
    1.Should we go for customization of services completely,so that it would fulfil our requirement.
    2.Are there  standard Enterprise Services exists which would we give us data in range(all records).
    If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
    Thanks & Regards,
    Divya.

    Hi Vaibhav,
    Let me tell you the objective in detail.
    Objective.
    To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
    This will consist of following major components:
    OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
    Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
    Enterprise services is an SAP utility to communicate with SAP.
    AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
    Fusion middleware is being used to develop application interfaces following AIA standards.
    Tasks at stake:
    Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
    Technical work of developing middleware using Oracle Fusion
    From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest  consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
    Thanks & Regards,
    Divya.

Maybe you are looking for