Transfer Asset to AUC

Dear All,
Because of a correction, we want to transfer values from an Asset to an Asset Under Construction.
Is it possible to do this directly via transaction ABUMN (if yes, how?), or is there an other transaction to perform this correction posting?
Thanks for your reactions.
With kind regards,
Jurriaan

Hi gvr,
The transfer from asset to AUC has to be done in the past (October 2006).
Depreciations have already been posted on this asset in the year 2006.
Do I understand you correctly? You want to reverse the original settlement of the AUC to the asset?
The problem is that the amount on the asset has its origin in an other AUC than the one the amount has to go to.
Besides that, no settlement has taken place. The amounts on the AUC are transfered with transaction ABUMN.
So no settlement from AUC to asset has taken place via transaction AIBU.
Regards,
Jurriaan

Similar Messages

  • Asset Transfer ( Regular asset to AUC asset )

    Can we transfer regular asset to AUC asset class.. When I'm going to transfer reguler asset to AUC it gave me following error
    "Account 'Acc.dep. accnt. for ordinary depreciation' could not be found for area 01"
    Regards
    Kesharika

    Hi,
    You can transfer from normal asset to AUC asset only if you selected the check box trans APC only in Tcode OAY1 within your COD for TTY 300 and 310.
    Please test the same in your sand box, i hope it works.
    Thanks,
    Srinu

  • Transfer partial asset values from completed asset to AUC/other asset

    Hi All
    Is it possible to transfer partial asset values from completed asset to AUC/other asset.
    if yes please let me know how to do that?

    I already checked T code ABUMN
    But by using this code whole asset value is transferred ; I want to transfer only partial value.
    eg. If i postasset value of Rs. 1000 to a machine & capitalise it. But after posting i found that actual asset value is only Rs. 600 and balance is of another asset.
    then how can i transfer balance asset value of Rs. 400 to another asset card.

  • Fixed assets capiralisation auc

    hello all
    please explain the processor of fixed assets capitalisation
    thank in advance
    ram

    (1) Asset class should be created with  'Line item settlement' for AUC
    (2) Assets can be created under the AUC asset class - while booking the GR, values get collected in the AUC asset
    (3) AUC asset is then settled to the final asset - using transctions AIBU and AIAB - transfer rules (% of value for receiver assets) are maintained first, and then settlement is run. 
    This is at a very high level.  Hope this helps
    Thanks.

  • Transfer Asset Under Construction

    Dear Forum members:
    We want to transfer an asset from one Cocode to another due to settlement under the wrong Cocode. Is it possible to transfer Asset under construction from one company code to another. So far, tests carried out with abt1n have been futile.
    What factors need to be considered before hand in carrying out an intercompany asset transfer?

    HI,
    Provide another settlement rule for the Order for which asset you want to transfer balances from AUC and made settlement run again.
    Murali

  • Report for track the assets history only for transfer assets through ABUMN

    Hi experts,
    I am transferring the some value from one asset to another asset through ABUMN, is there any report to see the this kind of transfer assets
    useful answers duly rewarded

    Hi,
    You can view the intra-company transfer report S_ALR_87012054.
    Thanks
    Jagdish

  • Investment order field is missing in origin tab of asset master (AuC)

    Dear Experts,
    While creating an asset master (AuC), the Investment Order field is not shown for the input, in the Origin Tab. Whereas for Asset master for the other Asset classes are showing this field for the input.
    Please advice how can I get this field in the asset master under AuC asset class.
    Thanks in advance in anticipation.
    An early reply is well appreciated and properly rewarded with points.
    Regards
    Preethi

    Hi,
    First check the asset Scr.layout rule for asset class by using path -
    Spro>Financial Accounting>Asset Accounting>Organizational Structures>Asset Classes-->Define Asset Classes
    Select your asset class and check - asset Scr.layout rule .
    Then go to -
    Spro>Financial Accounting>Asset Accounting>Master Data>Screen Layout-->Define Screen Layout for Asset Master Data
    Click on - Define Screen Layout for Asset Master Data
    Select your Screen layout which you got earlier. In Logical Field group select 'Inv. account assignment'. and double click on field group rule.Then make required changes in 'Investment Order' as required - Required, optional, display.
    Then check asset master data in AS02.

  • Depreciation for transfer asset

    Hi Sap Guru,
    I use ABUMN to transfer asset A (100%) to  asset B.
    And the APC value is 617.00 and accumulated depreciation is 37.02.
    I use   " percentage from useful life (0011) ".
    but I find the system use APC amount to calculate the depreciation for the transfer year not including the adjustment value (37.02) ???
    And therefore ,the monthly depreciation of asset B is not the same as that of asset A . why ???
    Can we make the system calculate the depreciation for B according to APC and adjustment value ?
    please help me answer the question . thanks a lot.

    Hi,
    we find the depreciation amount will recalculate based on the depreciation parameter in new asset .
    Therefore , we make all depreciation parameter including depreciation key , useful life, depreciation start date etc in new asset the same as those in old asset.
    And then , the depreciation amount will be the same.
    You can use path Financial Accounting>Asset Accounting>Transaction>Intercompany Asset Transfers>Automatic Intercompany Asset Transfers>Define Transfer Variants>(Specify Transfer of Fields (for New Asset in Target CoCd))
    to transfer the depreciaiton parameter to new asset.

  • Transfer assets collectively to new class and create new assets like ABUMN

    We need to change the account determination for a few Asset Classes that already have assets with postings.  As a result we must create new asset classes and assign a new account determination.
    Is there a program that would allow transfer assets collectively to a new asset class and create new assets automatically similar to ABUMN?  T-code ABUMN allows you to transfer multiple assets but you must create the new assets first.  ABUMN will transfer and create new asset but only does one asset at a time. 
    There are hundreds of assets with postings to be transferred from the old asset classes to the corresponding new asset classes.
    Appreciate whatever input you can provide.
    Tara

    download the asset master data(original) and create new asstes using lsmw or any third party tool also.

  • How transfer asset master balances

    how transfer asset master balances. please explain details process.

    Use ABUMN or
    ABT1N
    based on ur requirement.
    for documentation.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/17/1d3c3934f18443e10000000a114084/frameset.htm
    if open points please raise..
    Regards
    Anantha

  • Transfer assets from inventory to stock

    hello all,
    i want to transfer  assets from cost center to store.
    scenario is like this:-in dec 2010 we have taken the goods recipt of ABC capital material.after this we make assets belongs to this material, then asset is iisued to cost center from store.when the material goes to cost center abc material goes to depriciation of 10000 each month.now in july month we want to transfer back this asset to inventory(store) but cost of that inventory must be increased after depriciation.
    pls reply asap
    thanx in advance for sharing knowledge.
    regards
    simran

    ok

  • Transfer assets between accounting center

    HI,
    IS ABLE TO TRANSFER ASSET FROM ONE COST CENTER TO ANOTHER
    Ramakrishna

    Hi,
    Yes its possible.
    Tr.Code :ABF1 or ABT1N
    but it requires the proper G/L accounts , so check with your FI consultant.
    Regards
    Rahim

  • Setting the doc.type to use for t.code ABUMN (transfer asset ...)

    Hi All,
    Could anyone show me where to set, in customizing, the doc.type to use for t.code ABUMN (transfer asset within company code)?
    Thanks
    Umberto Gandalf

    AO71                   Document type for posting deprec.
    AO72                   Specify posting procedure
    AO73                   Define Transaction Type
    AO73_INV               Define Transaction Type
    AO74                   Define Transaction Type
    AO75                   Define Transaction Type
    AO76                   Define Transaction Type
    AO77                   Define Transaction Type
    AO78                   Define Transaction Type
    AO79                   Define Transaction Type
    AO80                   Define Transaction Type
    spro- FA - AA - transactions - transfers
    Rgds.

  • How to put ***.acquis.val for asset class (AUC &LAND)

    Dear All,
    According to I do lagacy data via AS91 (Asset Class: AUC & Land) I found that ***.acquis.val. field are gray.
    I defined Dep area = 0000 for both asset class because it must not calulate depreciation.
    Could anyone tell me how can I put acquisition value to these asset.
    Thank you in advance
    Best Regards,
    Utarat.P

    Hi,
    Please Check Cutover Date,
    Ex: If your Cut over date 31/03/2010, you are trying to post values in as91 @ 02/01/2010 system not allowed to give aqestion & Acc Dep values.
    Regards
    Viswa

  • Intercompany transfer asset with NBV 1 and zero

    Can SAP R/3 system do the transaction intercompany transfer asset with
    NBV 1 and zero value?
    Beside, can SAP R/3 system perform creation of asset with NBV 0 and 1?

    Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
    Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
    For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
    I hope to know how to solve in both method to rectify the problem more effectively.

Maybe you are looking for

  • A Tab History (Recent pages in "A Tab")

    Hi In older versions of mozilla firefox we had a little symbol near "back" button that showed a list of sites that you visited them apart (separate) from other Tabs history. but in version 4 this function is not there. you can see what I say using th

  • IPhoto won't import photos from new 70D

    Hi - I'm hoping for some guidance. I was a Rebel Xsi user for years, and just got a 70D. I used to be able to plug my camera in and iphoto would open up and import everything. Now, it only works sporadically, which is even weirder than not working at

  • HT2534 did i get itune id for free

    let me in itune for free did you?

  • In Purchase A/P, after Goods Return is new PO required ... ?

    Hello Experts, Scenario: I made a PO and Received the Goods against the said PO. Now there are 2 items out of 10 which were faulty. I returned two of them (through Goods Return) now PO is Closed and GRPO is Closed too. Now I can't make new PO for the

  • Parallel development with ClearCase and Jdev

    I am looking for information on "best practices", howtos, etc for configuring a ClearCase VOB repository to support parallel development of J2EE applications/components using JDeveloper in a large development team. In particular, I am not sure how to