Transfer between storage types and putaway strategies

Dear All,
Here is my scenario and please guide me on as detailes as you gurus can on how to proceed achieve this:
When receiving good from a PO the materials are received in 902: How to move them to my Raw materials storage type?
Note: I have defined 4 storages types, one for raw materials, one for production, one for Finished goods and one for spare parts.
And once I move the materials into the warehouse, what strategies do I have to define in order to place the materials in specific bins? Here's an explanation on how I need the putaway:
I have 5 different racks or stacks but I need all materials to be placed in a specific row of the first level, lets say material A in 01-A-01 the first 2 digits are stack then level then row(SS-L-RR); Material B should be placed 01-A-02 Material C 01-A-03; meaning all the materials should be placed in the level A of stack 1 but if there is another recepit of material A and it is already full then the system should propose another bin doesn't matter which one as long as it is not in the first level (because this positions are reserved for other materials).
This is the same for materials D, E, F but those are to be placed in stack 02 in level A
I need this because that's the way my client work right now, it is like Lean manufacturing strategy, so whenever they need to pick materials they always have them available at the lowest level
Is there an automatic bin to bin TO creation for when the picking empty the bin at the lowest level then a TO should be triggered automaticaly saying move from whatever bin the material is available to the "fixed" bin assigned in level A
Stack 1                         Stack 2
Level     1     2     3          Level     1     2     3
D     free     free     free          D     free     free     free
C     free     free     free          C     free     free     free
B     free     free     free          B     free     free     free
A     A     B     C          A     D     E     F
The variable here is that as I said before I have 5 Racks so in the other 3 stacks doesn't matter the levels, the materials can be placed wherever, and this will happen when receiving material A but all stack 1 is full then system should try to place it in the nearest bin available of stack 2 (only levels B, C, D) or if this is also full, then goes to stack 3 ( all levels available)
Please advise on how to map this, and the transactions and mvt types involved, and also please explain how should I make the picking or removal strategy to propose the picking always from the specific lower level bin, if not enough qty available then go and pick from other bin (and if it is possible at this point to create a TO to refill the fixed lower bin)
Thanks in advande to all.
Julio

Hi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards

Similar Messages

Stock transfer between storage locations and lead time

Hello,
We use stock transfer orders between different storage locations. Is it possible to maintain the transport lead time between storage locations somewhere or do in need to use routes and scheduling?
rgsd
GAR

Hi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards

The Question about stock transfer between HU-Management and WM-Management

Hi,
There is a scenario about stock transfer between HU-Management and WM-Management storage location. I use transaction MB1B , movement type 313 , 315. After Good issue from WM-management storage location, outbound delivery will genarated, then Pack, Create/Confirm TO, at last post goods issue for the outboud delivery. But when i do movement type 315, there is a warning message "Data of preceding document was not transmitted", and from the F1 help i find this system reponse "You can maintain an indicator that makes information about preceding documents in this delivery available under delivery type in Customizing. For some characteristics of this indicator, the type of preceding document and the related document and item numbers must be transmitted to delivery creation. At least one of these parameters is missing.".
So, My questions are:
1. Generallily, Outbound delivery is created by SO, inbound delivery is created referenc PO, but how the stock transfer for 2 steps generate the outbould delivery and inbound delivery? Could you pls tell me the where i can config this in the IMG?
2. What's "Data of preceding document was not transmitted" mean ? how to fix this issue ?
Best Regards
Boxer Du
I am the SAP fans, focus on MM and WM. I am interesting TRM Yard Management and Cross Docking now.Very Gladly to talk you about these areas. I want to exchange the knowledge with you, and want to be a good friend of you. Pls contact me. You can find My MSN in the profile. Thanks.

Hi,
Sure, The inbound delivery type is set up in the IMG->Logistics General -> HU management -> Basics ->Delivery type -> Delivery type determination.
For Inbound delivery type 'HID' is maintained in this view.
Best Regards.
Some One want to discuss the details , can contact me. Thanks.

Stock transfer between storage location in IS -Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

Transfer between storage location to storage location within same plant

Dear Gurus,
We r doing storage location to storage location transfer within same plant through purchase order.
Due to excise requirement we have to raise excise invoice for the same for captive consumption purpose.
Is it possible to make it One step procedure so that GR will take place at same time as GI the way it works for plant to planrt.
In ECC 6.0 option is there for transfer between storage location. I configured but it is not working.
Please check the same.
Rgds,
Saurabh

Hi Saurabh,
The proceedure you are following is a bit wierd. But I think this is as per your business requirements.
You can continue to follow the same proceedure as this may not be possible through one step movement type.
Best Regards,
Prateksha.

Change storage type during putaway

Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
Andrea

Hi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks

LT04 - User exit to add storage type and storage bin

Hi!
I am looking for a user exit to populate the destination storage type and storage bin (Fields-LTAP-nltyp and LTAP-NLPLA). The user uses tcode LT04 to createt transfer orders from transfer requirements.
The program name is SAPML03T.
Please let me know if anyone has any clue.
Thanks in advance,
Manasa
Message was edited by:
        manasa

I don't the exact User-Exit...And there are like 104 of them...So why don't you use this report (Not mine) and find out yourself -:)
REPORT zdummy_atg_2.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
      SELECT SINGLE * FROM TRDIR
      WHERE NAME = TSTC-PGMNA.
      IF TRDIR-SUBC EQ 'F'.
        SELECT SINGLE * FROM TFDIR
        WHERE PNAME = TSTC-PGMNA.
        SELECT SINGLE * FROM ENLFDIR
        WHERE FUNCNAME = TFDIR-FUNCNAME.
        SELECT SINGLE * FROM TADIR
        WHERE PGMID = 'R3TR'
        AND OBJECT = 'FUGR'
        AND OBJ_NAME EQ ENLFDIR-AREA.
        MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
      ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT IN ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
      WRITE:/(105) SY-ULINE.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
      SORT JTAB BY OBJECT.
      DATA : WF_TXT(60) TYPE C,
      WF_SMOD TYPE I ,
      WF_BADI TYPE I ,
      WF_OBJECT2(30) TYPE C.
      CLEAR : WF_SMOD, WF_BADI , WF_OBJECT2.
* Get the total SMOD.
      LOOP AT JTAB INTO WA_TADIR.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 'Enhancement/ Business Add-in',
          41 SY-VLINE ,
          42 'Description',
          105 SY-VLINE.
          WRITE:/(105) SY-ULINE.
        ENDAT.
        CLEAR WF_TXT.
        AT NEW OBJECT.
          IF WA_TADIR-OBJECT = 'SMOD'.
            WF_OBJECT2 = 'Enhancement' .
          ELSEIF WA_TADIR-OBJECT = 'SXSD'.
            WF_OBJECT2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 WF_OBJECT2,
          105 SY-VLINE.
        ENDAT.
        CASE WA_TADIR-OBJECT.
          WHEN 'SMOD'.
            WF_SMOD = WF_SMOD + 1.
            SELECT SINGLE MODTEXT INTO WF_TXT
            FROM MODSAPT
            WHERE SPRSL = SY-LANGU
            AND NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
* For BADis
            WF_BADI = WF_BADI + 1 .
            SELECT SINGLE TEXT INTO WF_TXT
            FROM SXS_ATTRT
            WHERE SPRSL = SY-LANGU
            AND EXIT_NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 SY-VLINE,
        2 WA_TADIR-OBJ_NAME HOTSPOT ON,
        41 SY-VLINE ,
        42 WF_TXT,
        105 SY-VLINE.
        AT END OF OBJECT.
          WRITE : /(105) SY-ULINE.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) SY-ULINE.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , WF_SMOD.
      WRITE:/ 'No.of BADis:' , WF_BADI.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : WF_OBJECT TYPE TADIR-OBJECT.
CLEAR WF_OBJECT.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
READ TABLE JTAB WITH KEY OBJ_NAME = SY-LISEL+1(20).
MOVE JTAB-OBJECT TO WF_OBJECT.
CASE WF_OBJECT.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Greetings,
Blag.

LT06 enhancement - How to update Storage type and Storage section

Hi,
My requirement is to update Storage bin, Storage type and Storage section, while creating Transfer order from through LT06. So I used the enhancement MWMTO003 to update Storage Bin in LT06 and it is also working.
Similarly I need to update Storage type and Storage section using userexit or BADI.
Is there any way to update Storage type and storage section in LT06?

Check enhancement MWMTO007.
regards

Automated storage type and bin in wms

hi
In continuous how can we use the fixed bin method in the mm01 without using the putqway strategy
how to get the storage type and bin in the transfer order at the destination pop up.

Hi
On navigating the transaction MM01 --> Organization level , you can get a field storage type below the plant and warehouse number fields.
After entering into the Warehouse view, you can find a section
"storage bin stock"
and enter the Bin against the field
"Storage Bin"
Gobinathan G

Relationship between material type and industry sector

Hi experts
when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
thanks in advance!

Hello
There is no direct relationship between the material type and the industry sector.
The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
regards

There is a mismatch between order type and GL accountu201D.

Hello
Can any one help me to know why I am getting this error message.
Here I am giving the steps carried out.
Step1. Using transaction code: FB60 I have posted a vendor invoice to a Machinery account GL account against a internal order.
Step2. A down payment using transaction code FBA7. using a special indicator M to a bank account.
Step3. When I am trying to clear the open item (by selecting above both documents) for the vendor using transaction F-44 system is giving an error message u201CThere is a mismatch between order type and GL accountu201D. System is prompting to correct the down payment entry, where I dint use any Cost centre, internal order.
Checked the Internal order profile, AUC settlement profile etc and no able to find an error message.
Can any one explain me why this error is coming and what need to be check in order to rectify it.
Regards
RS.

Hi It looks that the field status of the Order Type and GL Account field status is being mistmatching with each other. You can check the field status group given on GL Account and the fields status in Order Type.

Difference between line type and internal table?

Hi..
I wanted to know, what is the difference between Line type and Internal Table?

Hi,
Before the 4.7 release in SAP if we want to define an internal table we have to write the defination using the occurs statement and we need to define all the fields using INCLUDE STRUCTURE or indidually all the fields ine by one.
From 4.7 release of R/3 SAP introduced the Line type concept and it's part of the ABAP OOPS concept. for internal table defination we don't need to use the occur statements. Instead INCLUDE structure we need to create a Line type for that structure in Se11 and then we can define the internal table like :
DATA : ITAB TYPE TABLE OF <LINE_TYPE>.
Only thing is this table will be a table without header. So for internal table processing we need to define a work area structure of type line of line type . EX:
DATA: WA_ITAB TYPE LINE OF <LINE_TYPE>.
Hope this helps.
Thanks,
Greetson

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

How to distribute HU items in to diffrent storage types and diffrent BINS

Hi
I have one handling unit and I have done empty all 4 items in it HU02
As a result one material document created
But How can I distribute all items in to diffrent storage types and diffrent BINS
No TR and Posting change created at material doc
What is the config settings to cretae TR ot Posting change notice and Movement types
Kindly Help

yes LT10

Transfer between storage types and putaway strategies

Similar Messages

Maybe you are looking for