Transfer CO-PA Characteristic Values

Hi All,
I faces the situation that I need to manual create huge data of Characteristic Values every client.
Is there any method to transfer the CO-PA Characteristic Values from source client to target client?
Thank you in advance.

Yes with tx ke3i.

Similar Messages

  • Characteristic values for a stock transfer Purchase Order

    Hi Experts,
    We are using material variant concept. I created stock transfer purchase order for a variant material. There i'm able to give characteristic values. How to extract that characteristic values into a report.
    We are getting the characteristic values from Production order and sales order based on configuration object. I'm passing that configuration object through functional module, i'm getting the values.
    Functional module : VC_I_GET_CONFIGURATION_IBASE
    I tried with that functional module with configuration object value for stock transfer purchase order. I'm not getting the values. How to extract the characteristic values.
    Please help me.
    Thanks in advance.
    Naren

    Hi,
    Assign document type of stock transport order  to supplying plant and receiving plant in the path:
    SPRO-> MM-> Purchasing->Purchase Order-->Setup Stock Transport Order -
    > Assign Document Type, One-Step Procedure, Underdelivery Tolerance
    Here assign STO document type to your supplying plant and receiving plant & save.
    Now try doing PGI.
    For more check the link:
    http://www.scribd.com/doc/8985938/STO-Configuration-in-ERP-SAP-ECC-6-
    Regards,
    Biju K

  • Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1

    Dear Experts,
                          I am getting one error message while extraction,when executing the DTP .the messge is :
    "Characteristic value '5000000000 ' of characteristic 0MATERIAL is not MATN1 -converted"     BRAIN     68          @3R@
    what is the meaning of this messege ,Request you to plese suggest me reagarding the same .thanks in advance .

    Hi Bhullar,
    Have you maintained material length as 18 at ECC and BW sides.
    at bw side info object 0material conversion routine as MATN1. seems like you may be maintained as ALPHA. if your using as ALPHA conversion routine then at transfer rules for MATERIAL you can pass output data by suing FM - CONVERSION_EXIT_ALPHA_INPUT.
    or if possible then change conversion routine to MATN1 for material(info obj) at data source level or info object maintenance(RSD1) level.
    Thanks

  • Cu 50 Inconsistent characteristic value assignment Message no. C1821

    Dear All
    sorry I come from Taiwan,my English is not well
    I have a question for SAP PP
    I study Make-to Order Production with Variant Configuration
    I read paper Make-to order Quotation Processing with Vaniant Procing(663)
    and In accordance with the file operations
    but when i According to cu50 display an error message：
    Inconsistent characteristic value assignment，Message no. C1821
    creat pland order in tcode co08 display an error message：
    No valid BOM exists
    i choices "no" display an error message：Error or warning occurred during master data transfer
    I do not know how to resolve
    Please help me  thank you very much

    Dear All
    Thank you for your help
    I found the problem
    1.cu50 error message Inconsistent characteristic value assignment，Message no. C1821
    ans: the paper Bast Practices Make-to-Order Quotation Processing with Variant Pricing(663) , page 85
    Dependency name : YI_PC_YI_005_SELE_OPT
    Syntax : $root.YI_004_ADD_OPT='01'
    2.creat pland order in tcode co08 display an error message：No valid BOM exists
    ans :
    a.Tcode cu42 , in BOM application select SD01 for Production-General
    b. IMG OPL8 BOM Application sele SD01

  • PR created with a reference PR copied the reference material configuration( Characteristic Values).

    Hello,
    I have created a PR with reference to another PR. After adopting I changed the material and saved. After saving, when I checked the variant configuration at the line item level (Characteristic values), its showing the characteristic values of the material of the reference PR. It should be showing the details of the new material which I have used but, its showing the variant configuration of the material used in the PR which I used as reference.
    Ideally, these values has to be changed when I changed the material in the newly created PR.  What might have gone wrong here?
    Example:  PR- Purchase Requisition
                   Mat - Material.
    PR1 contains Mat1.
    I am adopting PR1 and creating PR2 with Mat2.
    After saving, when I check the variant configuration, classification values are from Mat1. I was expecting the values from Mat2 as I have Mat2 in PR2.
    Any suggestions would be of great help.
    Thanks in advance!
    Regards,
    Shaheen.

    Hi,
       Please check whether classification data has been maintained for the second material. If the configuration data doesnt exist for the second material, system cant redetermine and transfer. Refr the note: 588117 - FAQ: Configurable materials in purchasing Question number 5.
       If the configuration data exists and still the data is not changed, refer the note:  920648 - Error in the configuration when you copy PReq item  or 596994 - ME21N/ME51N: Configuration not determined again based on your release.
    Regards,
    AKPT

  • Conversion of Characteristic Values to SIDs is taking long time

    Hi Experts,
        Cube load is taking more than 7 hrs to complete for 6 million records. Max time is at Conversion of Characteristic Values to SIDs. Cube consists of 500 fields. Load is from DSO to Cube. DSO has 10 fileds with no SID flag check for activation. Remaining fields in the CUBE are pouplated looking in to other DSO's. Start and End routines are executing very fast. How to fasten Conversion of Characteristic Values to SIDs step.  I need to load 15 million records daily as part of delta. any suggestions.
    Thanks
    Sunil

    Hi Sunil,
    Go through the below link, it will be useful
    http://aq33.com/business-warehouse/Articles-05269.html
    Regards,
    Marasa.

  • Get batch characteristic value

    Hi Experts,
    I need to get the characteristic value of a batch if I provide with batch number and characteristic name as parameters.
    Is there any standard function module for this?
    Regards
    Thanks in advance
    Prathib

    Dear,
    BAPI_CLASS_SELECT_OBJECTS gets objects for a class. If you want to retrieve the characteristics, try using BAPI_CLASS_GET_CHARACTERISTICS.
    or check FM CLFM_SELECT_AUSP
    Regards,
    R.Brahmankar

  • Populate Batch characteristic values in create sales order BAPI

    Can anybody help me in populating the batch characteristic values using BAPI_SALESORDER_CREATEFROMDAT2?
    I have checked the related notes provided by SAP, like, 567348 but it will be great if someone can send some code snippet on this.

      Subramanian, Brad and Raja.
      Thanks for your suggestions its were useful, with
      these i can resolve my problem.
       !!! Best Regards !!!
    Raja
      I used the se37 to test bapis, is more easy and fast !!
      and you can save data like variant, and you can simulate the real execution without write any code abap,
    and re-process the times that you need,
    when you know what fields you need you write your abap code faster.
       Thanks !!!
    Message was edited by: Noemi Huerta

  • Performance - Conversion of characteristic values to SID

    Greetings:
    Yesterday I load 556.000 record into an infocube.
    No transformations of any kind. Direct assign for every infoobject. Very simple
    It lasted 1 h 30m to complete the loading.
    It started loading  7 datapackage of 50.000 records each.
    I realized that 3 of those datapackage (#2, #4 and #7) lasted from 41:47min to 41:59min in the "Conversion of characteristic values to SID" task. The other 5 lasted ... seconds.
    Any idea of that could be going on during this conversion?
    I don't understant why some datapackages last so long and other don't.
    Does anybody has any idea about this?
    Thanks in regards.
    Guillermo

    Hi Daniel,
    The SID generation is based upon the Dimension Table and Master data.
    If you see the dimension table can be build with different types like:
    one to many
    many to one
    many to many
    one to one
    So, if the dimension's for that datapacket data is many to many then it has to get all the relations and then it has to assign an SID.
    If it is one to one then there will be no more work to be done by the system to assign the SID's
    Hope you understood the back-end process.
    With Regards,
    Ravi Kanth.

  • Slow dataload into Infocube- Conversion of Characteristic values to SIDs

    Hi All,
    we are facing a slow delta load issue when loading from a DSO into an InfoCube ( approx 150,000 recs).
    After checking the monitor found that
    - The Conversion of Characteristic values to SIDs is taking time
    - The Start Routine time is real quick ( in secs)
    The underlying DSO is hugh and there is no SIDs Generation upon Activation flag set for it
    Master data is loaded first and than we are loading the transaction data.
    i've tried refreshing the stats of the Cube, Reduce the size of the data package,
    Deletion of Indexes than Loading and recreation of Indexes, no joy at all.
    Any comments and recommendations are much appreciated.
    Thanks,
    Natalie

    Hi Natalie,
    The problem for your slow delta load from DSO to cube is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    Becasue of which your activation is faster but your loading from DSO to cube will be slower as you only mentioned that SIDs are being generated .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    I guess your change log table is also huge in this case . If possible we can think of deleting the log table also . Then for the new records let it get filled .
    Hope the above reply was helpful.
    Regards,
    Ashutosh Singh .
    Edited by: DEADLOCKS on Apr 21, 2011 5:08 PM

  • Conversion of Characteristic Values to SIDs. Load Very slow

    Hi Experts,
                     We have a slow load issue when loading from a Write-Optimized DSO into an InfoCube. 8 millon recs in 10 hours.
    We check the start, end, and rules routines and every is ok but for all the package the load was very slow in the Conversion of Characteristic Values to SIDs.
    Can any help me with this?
    Thanks a lot,
    Alejandro

    Hi,
    It is because the SIDs Generation upon Activation flag is unchecked at DSO level .
    One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
    Are there any secondary indexes also in DSO ?
    You can try deleting them also during loading the data from DSO to cube .
    Also load your master data first and activate it before loading it to cube.
    Thanks,

  • BI-IP: Change of characteristic value in ABAP EXIT planning function

    Hi
    I have created a planning function of the type EXIT with reference data without blocks. In method IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE I am going to implement my code.
    Now, one of the purposes is to update the VALIDTO of an existing record. Is it possible to modify the characteristic values directly in C_TH_DATA (thus allowing me to just update the date directly on the record) or can I only append records?
    Cheers!
    /Karsten

    Hi Larse,
    Yes you can change directly your value in a record withou appending a new one,but still it will create 2 records in the delta buffer ready to be save to the cube.
    Reagrds,
    Eitan.

  • BI-IP change characteristic value in FOX

    Hello Guys,
    i want to change the characteristic value in FOX.
    Therefore the FOX runs through all char combinations to identify the highest
    number for the char test.
    This step works fine, but i cant write the value for maxloop in the cube.
    If i try, only the old row is deleted, but i dont get a new row with the calculated value for maxloop.
    the code looks like this:
    DATA LOOP TYPE test.
    DATA MINLOOP TYPE test.
    DATA MAXLOOP TYPE test.
    MINLOOP = 00000.
    MAXLOOP = 00000.
    FOREACH LOOP.
    MINLOOP = LOOP.
    IF MINLOOP > MAXLOOP.
    MAXLOOP = MINLOOP.
    ENDIF.
    ENDFOR.
    MAXLOOP = MAXLOOP + 00001.
    {Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
    Any suggestions what is wrong here?
    Regards
    T. Mekler

    Hi,
    You have written
    {Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
    But as per the statement  MAXLOOP = MAXLOOP + 00001 the MAXLOOP conatins a new figure. Obviously there will not be any record in the cube for this value of MAXLOOP.
    You are assigning this to the record with MAXLOOP = 00200, so system is assigning zero to  0AMOUNT for the record that is having MAXLOOP=00200 value.
    Make the below corrections and test again:
    DATA NEWLOOP type test.
    NEWLOOP = MAXLOOP + 00001.
    {Amount, EUR, #, #, NEWLOOP, 00000000, #, 2007, #, #, #, #, #, #, #} =
    {Amount, EUR, #, #, MAXLOOP, 00000000, #, 2007, #, #, #, #, #, #, #}.
    Regards,
    Deepti

  • How To get Characteristic values for an Equipment in a particular Class ?

    Hi All,
    How i will get  Characteristic values for an Equipment in a particular Class ?
    Any table or FM ?
    Thanks in advance
    Srikanta Gope

    Hi,
    You can use the FM BAPI_OBJCL_GETDETAIL to fetch the characteristic values for an equipment from the table parameters ALLOCVALUESNUM; ALLOCVALUESCHAR; ALLOCVALUESCURR.
    Or u can use the tables EQUI, KLAH, KSSK, AUSP, CABN
    Regards,
    Aditya

  • How to get Characteristic Values assigned to the line item of Sales Order?

    Hi,
    I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
    I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
    this fn. mod. giving all the Characters but not the assigned characteristic values.
    Is there any other way to find characteristic values of sales order.
    Thanks,
    vinayak.
    Message was edited by: vinayaga sundaram

    For example, please see this example program.
    It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
    report zrich_0001.
    * Internal Table for Characteristic Data
    data: begin of i_char occurs 0.
            include structure comw.
    data: end of i_char.
    data: xcabn type cabn.
    data: begin of xcawn,
          atwtb type cawnt-atwtb,
          end of xcawn.
    data: xvbap type vbap.
    parameters: p_vbeln type vbap-vbeln,
                p_posnr type vbap-posnr.
    start-of-selection.
      select single * from vbap into xvbap
                 where vbeln = p_vbeln
                   and posnr = p_posnr.
      clear i_char.  refresh i_char.
    * Retrieve Characteristics.
      call function 'CUD0_GET_VAL_FROM_INSTANCE'
           exporting
                instance           = xvbap-cuobj
           tables
                attributes         = i_char
           exceptions
                instance_not_found = 1.
      loop at i_char.
        clear xcabn.
        select single * from cabn into xcabn
                 where atinn = i_char-atinn.
        clear xcawn.
        select single cawnt~atwtb into xcawn
                   from cawn
                     inner join cawnt
                       on cawn~atinn = cawnt~atinn
                      and cawn~atzhl = cawnt~atzhl
                          where cawn~atinn = i_char-atinn
                            and cawn~atwrt = i_char-atwrt.
        write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
      endloop.
    Regards,
    RIch Heilman

Maybe you are looking for