Transfer CRM Campaign to the R3 system

Dear experts,
I'd like to transfer a CRM campaign to the R3/ISU system. I did the settings in CRM for a manual transfer(under <b>Customer Relationship Management -> Marketing Planning and Campaign Management -> System Landscape</b>).
But when I select a campaign for transfer and check consistency, I get the following error:
<b>"Method SetCRMReference is not intended for object type WBS-Element"</b>
Does anybody know which settings is missing? I don't know where I need to assign the CRM campaign to a WBS element.
Thanks in advance for your help,
Stephanie

Hi Sap Guru's
On the same lines I have been facing an issue that even when I transfer the Campaign manually to R/3 it does not appear in CJ02 & CJ30, whereas it is there in CRM_MKTPL. Then I have to create it again in R/3 also. Is there anything that can be done in order to prevent this issue ????
Regards,
Amit
Message was edited by:
Amit Singh

Similar Messages

Identify the Source System in CRM BADI

Hi,
I need to write the code in ORDER_SAVE BADI in CRM based on the source system. For example, When i create the quotation in PCUI i need to validate few fields. Suppose i have created quotaton in R/3 and it gets transfer to CRM and i need validate few more fields.
How do i findout in BADI whether the source system is PCUI or R/3? I have checked the SYST table but no difference in both the case. Anyother way to findout this.
Thanks in advance.
Regards,
Bala.c

Hello Bala,
In the ORDERADM_H structure of the CRM_ORDER_READ or in the CRMD_ORDERADM_H table you find a field called LOGICAL_SYSTEM. In that field the RFC destination of the source system (source system = where the order/transaction was created) will be stored.
For PCUI this field will have the RFC destination of the CRM server itself.
For R/3 it will have the RFC destination of the R/3 system.
Hope this helps,
Reward points if useful!
Regards,
Joost

Getting campaign data from external system to display campaigns/offers

Hi,
I have to find a solution for a campaign requirement for my company.
The user centric campaigns are managed by a external system provider who process billing statements (eg if you see your paper credit card statement, you see special offers, campaigns in your paper statement.)
On similar lines we have to show/build the campaign in our WLP application. The campaign data is hosted in external systems.
We have to think of a generic reciever in WLP which can get the external campaign data and based upon that it can display right campaign to logged in users.
Any ideas, leads. Has somebody implememted such a feature.
Any help will be appreciated

Hi Vishnu,
OK, I see now. You don't want a pluggable user profile data source, you want a pluggable campaign rule and pluggable campaign content. I don't think there is such a thing as a framework for plugging an external campaign into Oracle WebLogic Portal.
I don't think you can plug an external campaign rule into the Oracle WebLogic Portal rules engine but you can make Oracle WebLogic Portal see external user profile data and external content. So, 2 of the 3 ingredients for the campaign are easy enough to make available to the portal. I would guess that you either need to transform the campaign definition into the proper XML document for consumption by the portal's rules engine or you need to evaluate the campaign on the external system and have the results available to the portal via a mechanism like UUP.

Transfer material type DIEN in ECC system to CRM product type Service

Hi Experts,
I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
How can we do this?

Hi Viswanath,
   I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
   Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
       Customer Relationship Management -->
             Master Data -->
                    Products -->
                        Settings for Product Type -->
                                Allow Upload for a Product Type.
   Now here select the check box for product type 02(service).
To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
         Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
//Bhanu

I have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk?

i have deleted my private folder and do not have enough space to reinstall my operating system. How can i transfer files from my hard drive to an USB drive to free up space when the operating system isn't working. or do i need to erase disk through disk utilities without erasing data (but will it delete my programs such as photoshop, office, creative suite?

Connect the computer to another Mac and put it in FireWire Target Disk mode, or use the Disk Utility to clone the drive or image specific folders with the USB drive as the target. After you've copied off everything you want, you'll likely need to erase the drive and reinstall the applications.
(69695)

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

It's possible to transfer licenses but it must be done by contacting a Customer Service representative by phone or web chat. They'll probably have you submit a form.
Contact Customer Care

CLIENT of the source system in the Transfer Rules

Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwyn

hi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps.

Transfer method 'TRFC with PSA' is not supported by the source system.

Hi guys
We are getting the following error when we try to open the transfer rules:
Transfer method 'TRFC with PSA' is not supported by the source system.
And when we run the load we are getting this error message:
An RFC call-up triggered the exception
Our source system check is ok. RFC test is ok from both sides.
Please advice what else can be the solution.
Edited by: sam on Nov 6, 2008 4:51 PM

Did you do Right click on Source system and 'Check' option in RSA1-> Source Systems?
Is this problem after upgrade or something like that?
-Abhijit

BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

Uploading old CRM activities into the system

Good afternoon
In our company we want to upload old CRM activities into the system (CRM 4.0)
By doing so we also want to change the "created by" field with the initials of the user that used to make the activity.
This is a problem since some of the users are no longer with us in the company. Therefore they do not have a working SAP account, but we still want to add their name in the field.
Is this possible and what do we have to do?
Thank you for your help,
Filip

Filip
If you do not want to program, you can also upload the activities with the external list management (ELM) or the LSMW workbench. However, in your case I would create the old employees still as BP's in the system and assign them to the activities in the partner function 'Employee Responsible'.
The 'Created By' field is filled automatically and will be filled with the user loading the activities. Of course you can later overwrite them directly with ABAP in the DB, but this is not such a good idea as this data would e.g. not be replicated to mobile sales (if you use it).
So better do the following:
1. make sure all employees are as standard business partners and employees in the system (they might have a deletion flag, if they no longer exist in the company)
2. upload the activities with a partner function pointing to the former employees
3. If you want, you can then still update the created by field on the DB directly by getting the employee out of the partner function.
Regards, Kai

Problem with Role and User Distribution to the SAP System

Hi to all.
I've a problem when i try to transfer roles from portal to SAP CRM. (System Administration --> Permissions --> SAP Authorizations).
If I select from the drop down list the SAP Alias corresponding to the connector to the target system an error is displayed:
class com.sapportals.connector.connection.ConnectionFailedExceptionConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
I think the problem is in the connector configuration since the connector test fails too (due to User attribution problems I think)
Thank you for any help!

Hello Mario,
I have the same problem.
Did you find a solution for this?
Please let me know.
Thanks in advance, Michael

How to link CRM Campaign to ECC Sales Orders

Dear all,
How to see Sales (R/3) that happened as a result of Specific CRM Campaign execution.
while creating R/3 Sales Order where do we refer relevant Campaign ID.
In SAP how to analyse with respect to Budget, Cost and Actual Sales for a Campaign.
In Campaign where do we enter Budget and Cost information and how will it synchronize with R/3 system for revenue analysis purpose.
What is the standard solution for this and what is the required landscape for this.
Please help me to resolve the above issues, Each suggestion will be highly appreciated.
Best regards
Raghu ram

Hi Raghu,
You have to do the configuration related to Campaign Determination for geting the campaign Id in ECC sales Order.
Pls find the related link to do the configuration
http://help.sap.com/saphelp_crm40/helpdata/en/6b/160ade5eda5b42a0d756961f99a2a1/content.htm
Regards
Vinod

Query on CRM Campaign Determination in ECC

Hi Friends,
Can anyone help me with a doubt on campaign determination in ECC?
My query is 'what happens during campaign determination in SAP ECC Sales Orders, if we have multiple CRM campaigns hits for the same access sequence?". Does the system give a pop-up and allow the user to select one of them? Or is there any other way the system deals with this?
Any inputs are highly appreciated. Kindly help.
Thanks in advance !
Neeraj Sharma

Hi Neeraj,
if multiple campaigns are determined for an item they are basically all assigned to that item: see http://help.sap.com/erp2005_ehp_04/helpdata/EN/da/145142a238bd30e10000000a155106/content.htm for further details.
Best Regards,
Michael

Transfer of Campaigns to R/3 PS via Middleware

I'm trying to turn on integration via middleware between Campaign Management and SAP R/3 Project System.
Do you know about SAP documentacion for configuration steps?. I can't find anything in help SAP CRM and Best Practice.
Thanks,
Lyda

Dear all, In the meantime this is the feedback from SAP.
Hope it is helpfull.
Cheers,
Diogo
Dear Mr. Figueiredo,
When a marketing element is replicated to R/3, only the element id,
dates and the element guid is replicated to R/3.
The master data (Products and customers) are transferred to the BW
system. The Costing/Planning data is transferred to the SEM system.
I have attached a small screen shot giving you the steps how the
data is transferred to R/3
I hope this information is of some help to you.
Regards,

Change in the source system

Dear All,
We have currently BW 3.5 and CRM R/3 server up and running in Production.
Now CRM server is being upgrade to CRM 7.0 . Now i being the BW consultant needs to find out what is that needs to be done at BW side.
My idea :-
1) We first need to create a new Source system and repllicate all the data sources in bw system.
2) Assign this datasource to the old infosource.
3) create an infopkg and try loading the data once again to the old cube.
We can ahieve this in Dev system and then transport the Transfer rules again to BW Production system.
Can we directly get this done in Production system????
Kindly add your idea to this list and suggest if we can do this directly in the Productions system without the need to transport the Transfer rule from Deve system.
Thanks & Regards,
Anup

first, temporarily disconnect the source system connection when the upgrade is started...
after that as you said, please transport the transfer rules from DEV box to production box. it is not advisble to do directly in production box.
Since the end user is having access to the production box, it is not advisble to open the production box as modifiable and allow to changes.
Hence we cannot take long down time isnt..? After upgrade is done, please restore the source system connection.
Better you dont delete the source system of your CRM system in BI.
Hope this would help you.

Transfer CRM Campaign to the R3 system

Similar Messages

Maybe you are looking for