Transfer cs5 to new disk

the hard disks in my computer are hdr i wont to up grade to ssd for both the main disk and the scratch disk is it possible to transfer cs5 from the hdr to the ssd ?? if so how do i do it with out loosing the program

When I upgraded to SSD I backed my entire system up to external USB drive, swapped hardware and restored the backup. I've been using this system for a year since then without any problems.
I did have have to call Adobe to get Photoshop activated again. Consider deactivating Photoshop before making the backup.
-Noel

Similar Messages

How can I transfer CS5 from my old PC to my new PC?

How can I transfer CS5 from my old PC to my new PC?

You can download the trial version of the software from the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
If you do not intend to use the older machine any longer, you should consider deactivating it and uninstalling it from that machine. If you think you might need the option to use it, you are allowed to maintain two licensed installations.

I own CS5 on my work laptop which was just stolen. Do I need to buy CS from scratch or can I transfer CS5 to a new computer even though I don't have the one that CS5 is on?

I own CS5 on my work laptop which was just stolen. Do I need to buy a new CS from scratch or can I transfer CS5 to a new computer even though I don't have the computer that CS5 is on? Company purchased CS5 before the whole creative cloud leasing thing started, but after discs.

You can use web chat to remove authorization from the computer that was stolen:
Serial number and activation support
You can download the software again here:
Other downloads

Will old iMac problems transfer to the new one?

My present Intel iMac is having firewire issues and past its warranty, so I'm going for a new iMac. In an effort to try and salvage the old one I wiped everything clean, reinstalled the the OS and restored from a Time Machine backup. Now I'm having problems that weren't there before, like not being able to open Mail, iTunes, or Safari.
The new iMac arrives on Monday, but I'm worried that whatever is wrong with the old computer will transfer into the new one. Any ideas on how to avoid this?

That's a good thought on the 3rd party apps. I'm taking inventory of all my disks and downloadable Apps now, and removing them so I can individually reinstall them on the new machine.
I checked out the permissions and everything seems to be OK. But still no luck on the those three apps. Mail opens, but crashes as soon as I try to read a message. And iTunes and Safari can't stay open at all. Interestingly enough, I'm trying other Mac apps like iCal, Garage Band and iPhoto and they're all still good.

I downloaded Adobe Acrobat X Pro online in 2011, installed update today (10.1.3). How do I install /transfer to my new computer?

I downloaded Adobe Acrobat X Pro online in 2011, installed update today (10.1.3). How do I install /transfer to my new computer?

download the installation file(s) and install,
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

HT2188 I'm presuming my old iPod id dead meat, but after 24 charging a get the Apple Logo followed by an image that looks like a file folder with an exclamation point. Is there anyway we can resurrect all trhe music on it & transfer into a new iPod?

I'm presuming my old iPod id dead meat, but after 24 charging a get the Apple Logo followed by an image that looks like a file folder with an exclamation point. Is there anyway we can resurrect all trhe music on it & transfer into a new iPod?

You can try putting it into Disk Mode
http://support.apple.com/kb/HT1363
If that works, you can see if the computer will recognize it when connected, either in iTunes or by the system.
NOTE: You can also try putting it into Disk Mode WHILE it is already connected to the computer.
If the iPod is recognized, you may be able to use one of the third-party methods or utilities to transfer song files from iPod to computer. You can do a Google search on something like "ipod transfer" to get some links (add "mac" to the search if your computer is a Mac).
Once the song files are on your computer, add them to that computer's iTunes library, then sync it to the new iPod.

How can I transfer CS5 to my laptop?

I currently have CS5 installed on my desktop mac, but i'm getting a macbook pro soon. How can I transfer CS5 to the laptop?
Will i be able to simply install it on the laptop using the same serial number? or will i have to deactivate the licence on the desktop computer?
Thank you!

Help>deactivate on any CS5 app to deactivate the suite. Then just install it on the new machine.
Bob

Hard drive volume appears in sidebar Favorites when new disk mounts

Hard drive on my 17” MacBook Pro Quad Core i7 (2.5 GHz, 8GB SDRAM OS 10.8.2) is partitioned into 4 volumes; I'll call them A-Mountain Lion startup drive, B-Personal, C-Work, D-minimal clean Mt. Lion for emergencies. Problem relates to my regular boot drive.
I have Finder sidebars set to show 8 or 10 folders in the "Favorites" section and have ticked all boxes in the "Devices" section. Most of the time I have no external disks, CDs, etc., connected to the MBP, so the Devices section generally shows my computer and the four partitions. So far, so good.
Lately, every time an external volume is mounted and every time a disk image is mounted, the Personal volume (B) of my internal drive, which is already showing under Devices, also pops up in the Favorites section of the sidebar. I remove it from the Favorites, but the next time an external disk or a disk image mounts, there it is again. It's always volume B, never A, C, or D.
I have tried everything I can think of to cure this odd behavior: Used Disk Utility (verify all disks/volumes; repair volumes; repair permissions; etc.), though nothing seemed wrong. I've run Disk Warrior on all volumes. I cleaned out everything possible on the startup drive (A) with the latest version of Onyx. I've repeatedly trashed the plists I could identify in my user Library that had "sidebar" or "finder" in their names. I've logged in and out; started and restarted; started with shift key down. Still, every time a new volume or disk mounts, up pops this extra volume B among the Favorites (where it shouldn't be). I checked and unchecked various combinations of sidebar items in Finder Preferences. I've Forced Quit the Finder. It doesn't matter whether all, some, or no devices are checked; when a new disk mounts, there's the extra volume B again.
I have only two other clues to add. (1) I created a new temporary user account on my startup drive (volume A), and this behavior did NOT occur in the new account. (2) This same behavior had arisen once before, a couple of months ago. I went through similar blind attempts to cure it then, but at some point I must have done something right because I it got fixed. For the life of me, I can't remember which of all the things I tried did the trick.
Many thanks to anyone who can shed light on this annoying behavior.

I can add a bit to my earlier description. I had said the problem did not occur in a new user account. Well, after using the new account for a while, it showed up. Eventually I erased the startup volume and installed Mountain Lion (plus updates to 10.8.2) fresh. I used migration assistant to transfer only my old user, pared down applications, and network settings -- no preferences, application support stuff. The old user carried over the problem. But I immediately created a new user and have been working from it for the past two weeks, very gradually opening apps, adjusting settings, etc., and testing for the anomaly at each change. In some cases I did move preferences from a backup clone, but was always careful to test after each addition. All was well for a week, until one morning I noticed the data partition had appeared in sidebar Favorites. So I'm back to where I was. I had been documenting each change or introduction I made. The only things my notes said from the day before the sidebar anomaly appeared was launching and struggling to activate QuarkXPress 9.3, and copying over my old prefs and settings for TextWrangler. I completely removed every trace of QXP, but the problem remained. (I did not remove TextWrangler because I just can't believe it could be the culprit -- but could it?)
I also noticed a similar (though maybe not identical) problem posted in another thread <https://discussions.apple.com/message/20591050#20591050>, but so far no answers there either.

Install Initial bootstrap on new disk

Hello,
I have an old Ultra-10 root-disk that is starting to make some noise. I purchased a new big disk drive. I plan to transfer all the file systems over to the new disk and replace the original disk. I have already used 'format' to partition the disk and I have copied over all the filesystems. Next step - make it bootable.
What is the command on Solaris-7 to install the 'boot' program to make this new disk bootable?
I have hunted around on docs.sun.com quite a bit, but I must not be using the right keywords....

"The file just loaded does not appear to be executable."
Boot block on the hard disk is corrupted .Boot the system in single user mode with cdrom and reinstall boot block .
#installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk /dev/rdsk/c0t3d0s0
"bootblk: can't find the boot program"
boot block can not find the boot programe - ufsboot in Solaris .Either ufsboot is missing or corrupted . In such cases it can be restored from the cdrom after booting from cdrom & mounting the hard disk
# cp /platform/`uname -i`/ufsboot /mnt/platform/`uname -i`

Can't transfer music to new computer, please help

My old computer crashed so I can't connect it to my new one to transfer my songs. I plugged my ipod into the new comp before downloading itunes and I save my playlists onto it in My Music. Then I downloaded itunes and tried to transfer my music into my library. It says theres an error and the songs can't transfer. Also, the ipod's songs pop up when I click on the ipod but they're gray and I can't highlight, move, play, or acceses them in anyway. I reeaallly don't want to download my 800+ songs all over again so any tips will be appreciated!

I'm new to this Discussions Forum but I've notice so many people with the same problem as u...I guess I'll just post my solution here n hope it relieves some of everyone's headaches..
I've discovered a way to preserve my ipod songs n transfer it into my new computer. It took
me quite a while to figure it out so if it also work for u, please give credits where
credit is due~ ^_^ MyMyMai
Follow these steps for Windows XP users:
1) Go to "Start"
2) Go to "Control Panel" n click on it.
3) Click on "Sounds, Speech, and Audio Devices"
4) Click on "Portable Media Devices", then a list of ur portable devices should pull up,
including ur ipod.
5) Click on ur ipod, then it should pull up folders named "Calendars" "Contacts" "Notes"
"iPod_Control" n "Photos"
6) Click on the "iPod_Control" folder, it should pull up several folders named "Artwork"
"Device" "iTunes" n "Music"
7) Click on the "Music" folder which would bring up several folders named "F00" "F01" "F02"
and so on and so forth.
8) All you have to do is copy n paste ALL the folders onto ur new hard drive, like ur
desktop or "My Music" folder.
9) Open up ur new itune on ur new computer, go to "file", "add folder to library", and
click on ur "My Music" folder or each "F00" folders on ur desktop.
All the songs should transfer into ur new iTune library. Hope this helps!

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

I'm trying to transfer iTunes and it's based off an old email account. How can I transfer to my new email account.

I'm trying to transfer iTunes and it's based off an old email account. How can I transfer to my new email account.

In addition I don't remember my old password.

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Tnx

I recently upgraded from 4S to 5S. There are 2 games that I wish to transfer to the new device. 1st game isn't available in the Store anymore, so can't download. 2nd game doesn't save when you change devices. How do I get those 2 apps to my new phone? Can I do that manually through iTunes?
Thanks!

Hello jon713,
Thank you for using Apple Support Communities.
For more information, take a look at:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
App Store Application data (except the Application itself, its tmp, and Caches folder)
Application settings, preferences, and data, including documents
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
To transfer iTunes Store purchases from your device to a computer, follow these steps:
Connect your device to the computer. If it is synced with another iTunes library, the following dialog may appear:
Click the Transfer Purchases button.
Have a nice day,
Mario

Transfer cs5 to new disk

Similar Messages

Maybe you are looking for