Transfer customizing data between SAP System
Hi to all!
How I can transfer PS customizing data between R/3 4.5B and R/3 4.7?
Thanks,
Gianluca
Hi,
Can I suggest a slightly more robust approach? What Andreas is suggesting, is that in fact you should be able to transfer the customising data by doing a standard transport. You can create a transport in your 4.5B system and then it can be physically copied (at the operating system level, for example FTP) to your 4.7 system and then imported.
I think that this is probably the right way to go, but you may have some troubles if the PS system has some changes in 4.7 (as the destination config tables may have different structures to the source tables).
The change I suggest from Andreas is start by using the IMG to generate the transport. If you go to every area of customising that you wish to transfer to the 4.7 system and make a change (save to a change request) then change it back and save, you will make sure that you have every table required to be transferred in your change request. You can then edit the change request (in SE09) and change the keys (by putting an *, rather than the specific data) to ensure you get all the data.
I just feel that given the complexity of configuration tables (and the sheer number of them) it would flow smoother if generated the initial list via the IMG, rather than trying to figure them all out yourself.
After the change request has all the correct entries you will need to release it (to ensure that the object in Unix has all the data from the SAP system). You can then FTP it to the 4.7 system and do an import of the change request (and cross your fingers that you don't get import errors due to config tables changing in 4.7).
Hope that helps,
Brad
Similar Messages
-
How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager
Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu -
Transfer ports definitions between SAP systems
Hi,
I would like to know if there is a way to transfer ports definitions (WE21) between SAP systems ?
Thanks, Nir.There is no program to copy ports into another system. You could write an ABAP program and an RFC FM to read EDIPOA and EDIPORT tables from other client and insert them into the current system tables, but it is not suggested to do that because the RFC destinations should exist and no company wants to do direct update on SAP delivered tables because SAP will not support in case of errors.
Thats why as far as my experience, I've always created them manually.
regards
Shravan -
Re: Transfer Large Files between SAP Systems
Dear All.
Please can someone advice a quick way of transferring large files from one sap system to the other. Can we use ALE? Can Ale handle large files? If there are others ways please advice at your earliest. thx alotyes ,you can use ALE between two SAP R/3 system..
it is efficient way to transfer from One SAP R/3 to Other SAP R/3 -
IDOC Transfer data between SAP 2 System
Hi All,
I have SAP two systems. I want to transfer data between SAP by IDOC. please let me know about how to
set "LOGICAL SYSTEM" for receiver for use on distribution model setting. If you have other method please recomended.
Regards,
Moderator message: please search for available information before asking, do not ask basic questions.
locked by: Thomas Zloch on Sep 2, 2010 10:54 AMHi,
The steps which u need to do for logical system setup:
outbound configurations (Sender)
s1) Goto BD54 - DEFINE SOURCE SYSTEM & RECEIVER SYSTEM HERE
s2) BASIC SETTINGS --> LOGICAL SYSTEM -->Assign Logical system to client.
s3) a) Goto TCODE u2013 WE21
create port for sender.
s4) a. Maintain Distribution Model in Detail.
Execute BD64 and click on change.
Click on Display/ Change button
s4) b. Click on Edit menu -> Model View -> Create
s4) c. Select your model view and click on Edit menu -> Add Message type
s4) d. Click on Environment Menu -> Generate Partner profile
s4) e. Click on Edit Menu -> Model View -> Distribute.
s5) Goto TCODE u2013 WE20
Click on Partner Type LS (Logical System) and press Create Button
INbound configurations (Receiver)
S1) Goto TCODE u2013 WE21
create port for receiver.
s2) Goto TCODE u2013 WE20
Click on Partner Type LS (Logical System) and press Create Button.
A profile is created for RECEIVER (client) so that we have to use the same profile every time we transfer a new message
type to this Receiver. -
Data transfer i happening between SAP CRM & PI portal,
Hi Experts,
How is the data transfer i happening between SAP CRM & PI portal,
how many ways it has been done ,Please explain the my query.
Idoc wil be doing this functionality?
Thanks & Regards
Prajith P
Edited by: Prajith Prabhakara on Aug 12, 2011 7:51 AM- Web Services Description Language (WSDL)
- XML provides the common syntax for representing data.
More info, refer
[http://wiki.sdn.sap.com/wiki/display/ABAP/Web+Services]
[http://wiki.sdn.sap.com/wiki/display/XI/SAPXIQuestionsAndAnswers]
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c018da90-0201-0010-ed85-d714ff7b7019]
Good day..!
Cheers, Satish -
How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI
Hi,
I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI". While I'm waiting for more authorisation to r/3 to carry it out and test this functionality.
I'd like to ask a question to anyone who has implemented this type solution. On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query. I suspect when we run a query I would run it for only a period(using variable) to reconcile.
My question is this. Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
RegardsDEar Mark,
There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
hope this helps.
Kindly assign the points if it works.
Revert back if u need futher help/information. -
Transfer Data from SAP system to non-SAP system
Hi all,
I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
Thanks
Arif
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Oct 16, 2011 10:38 PMHi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh -
CVI_EI003 - No customer assigned, you cannot transfer customer data
Hi experts,
I have a problem sync BP, when i'm trying to do it BDOC is returning CVI_EI003 - No customer assigned, you cannot transfer customer data.
I have checked all customizing for CVI, and it's fine.
https://help.sap.com/saphelp_crm60/helpdata/en/72/1298956c744f4399fe372367646757/content.htm
I have also checked note: 931239 and its related note 436843.
But i cannot find the problem and also the solution.
Could you please help me??
Thanks in advance,
Muchas graciasHello Gracias,
Can you apply notes 609766 and 757955?
thanks
Willie -
Getting an error in while transfer the data to SAP
Hello Everyone,
I am getting an error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
when i was transfing the data to SAP R/3.
But i found the error In SM59 , TCP IP connections ,
AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER and SAPSLDAPI are failed to connect.
ERROR program AI_DIRECTORY_SXI not registered
LOCATION SAP-Gateway on host starxi / sapgw00
DETAIL TP AI_DIRECTORY_SXI not registered
COMPONENT SAP-Gateway
COUNTER 15736
MODULE gwr3cpic.c
LINE 1621
RETURN CODE 679
SUBRC 0
RELEASE 640
TIME Sun Oct 12 16:23:18 2008
VERSION 2
How to register these program?
Can any one please help me.
Thanks
Subash.Did you create the entry for this in the J2EE visual admin -> Cluster -> Server -> Services -> JCo RFC Provider ?
-
Verify the data between SAP R/3 and SAP BW
Hi Experts,
How to verify the data between SAP R/3 and SAP BW at the time of data mismatches in reports.
give me the proper solution.
Thanks,
SyamHello,
You must know what is the infoprovider source of the data shown in the report.
Once you know it, check the content filtering by same restrictions as in the mismatch report. Now you have the data in BW.
Then you have to know the proper transation or table in R/3, from where the extractor retrieves the data to populate the infoprovider; make same restrictions and compare it with data in BW.
Regards -
Hi all,
Our Production system was installed with following modules (PP, MM, SD, QM & FICO )
we are running Bar-code data in SAP system. Because of this our database size is growing somuch. Is it advisable to keep barcode data in SAP system. If yes what are the implications of the SAP systems. OR can i use third party software for Barcode data generation.
SAP system performance is de grading day by day
Please give your valuable suggestions.
regards
RameshHi,
We are using barcode too on our system, which is for production order (order ID) for stock and goods movement purpose.
Our mechanism is converting production order number (EAN) into a graphical barcode (Code 39) while printing a production order label. By this method we are not keep barcode image on our system, but anytime we need this barcode, we just print it.
Database size grow so much?
- consider data aviodance/ data archiving
SAP system performance is degrading day by day
- how do you justify that barcode is the root cause of your performance degradation? maybe you have to take a look inside your system : checking user activities, parameters, I/O, CPU usage, expensive SQL statement, table reindexing, table statistics etc that may help you to solve your performance issue.
- if you are sure that the huge database size is the major problem of your performance degradation, consider data archiving as mentioned above. note that data archiving still give you opportunities to read data even though data has been archived. we have done for all module we have PP, MM, WM, SD, FI, CO and found no issue about reading data from archive.
- consider to reorganize, that table fragmentation may contribute in database size.
hope it help you.
rgds,
Alfonsus Guritno -
How to batch upload some data into SAP system?
Hi All:
I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
Thanks in advance!Hi,
I think at least there are four methods for batch input which you can use in SAP system:
Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
So you had better contact your SAP support department, help you to upload data!
Good luck
Tao -
To transfer the data Cross the systems why we are not using BAPI Method?
Hello All,
To transfer the data Cross the systems why we are not using BAPI Method? why we are using only ALE/IDoc's?Hi Naveen,
Listing down those I know -
1. Master data is expected to be changed/created less frequestly.
2. Transactional data is expected to be chnaged/created more frequestly.
3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev -
For uploading master data(ex:customer data) into sap,
hi
for uploading master data(ex:customer data) into sap,
which methods you prefer? call
transaction/session/lsmw/bapi? why?
Thanks
RamaHello,
Check this:
COde:
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Vasanth
Maybe you are looking for
-
Printing to windows printer via SMB - Printing garbled text
Hi all. I have been working on this issue for around 3 hrs this morning and finally figured it out. Thought I'd post what I did to help others with similar issues. Here's my set up: I have a PC with HP photosmart printer connected to it. I've a Macbo
-
I have tried rebooting several times. I have also opened iPhoto while holding the Command Option buttons. I was able to get to the repair tool but it froze again. I have OS X. I can see my photo library in Finder but can't access it. I have not
-
Having the same web part twice on a page - how to distinguish parameters
Hello, I've made a web that takes a set of custom properties . If I put the web part twice on the same pages, all the web parts are using the same custom parameters. I understand that the culprit is in line: public static string strList, but I wond
-
Got it... installed it... here's what doesn't work
First issue: my network cards were detected, one onboard 10/100/1000 ether and one wireless ethernet Netgear PCI card (MA311). My net connection is via the netgear and none of the wireless options are available for me to set - how do I fix this? Also
-
Is there a way to make my cursor look different on Mac Mountain Lion
I currently have a Mac Book Pro with Mountain Lion and i would like to change the cursor into something else (Not increase the size) . Please help, this is very important!!