Transfer data after Network Confirmation to another Work Center?

Hi all,
let me explain my problem:
I've defined an activity with 3 activity elements(work). Every activity has it's own Work Center.
Normally a worker uses transaction CN25 or CN48N to enter a Network Confirmation by typing in Network, Activity and Element.
After this he types in his Personell Number and the Actual days or hours and confirms it.
If the user takes for example too much days and confirms it, normally i've to correct the Network Confirmation by using transaction CN29 and tell worker to retry his Confirmation. (Because there are only allowed maximum X hours...)
Is it possible to transfer this too much days to another Work Center by using an transaction???
Is it possible to transfer this entry to another Work Center???
Im not a Cost Specialist, please let me note if there are any Threads which discribe the same Problem...
Thanks for any Answer...
Regards,
Tobi D

Hello Virendra,
thanks a lot for your answer.
First of all... There was a mistake in my explanation-it's not I've defined an activity with 3 activity elements(work) it's I've defined a network with 3 activity elements(work).
In our Company every Activity has it's own Work Center. I meant the Identification and view selection in Project Builder (CJ20N) tab Internal --> General Section and here: Work center.
Well, i think my main problem is that i do not know how to correct Network Confirmations without using the delete transaction CN29. For example: Worker confirms on Work Center of Activity A with CN25 oder CN48N, but should confirm on Work Center of Activity B.
Regards,
Tobi D

Similar Messages

How can you transfer data from one ipod to another ?

How can you transfer data from one ipod to another ipod ?

The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device." Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

How do I transfer data from one iPhone to another?

How do I transfer data from one iPhone to another?

If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
Here's how...
Connect your old Apple device to WiFi and to a power source.
Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
When the restore process is complete, your iPhone will restart and be ready to use.
Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

Different ways to Transfer data from one database to another database

Hi all,
What are the ways to transfer data from one database to another database. With the following options, i Can transfer data as far as i know. Please
correct me if i am wrong or tell me if there is any other options are available.
1) Create database link/connection string and using this string and COPY command, we can transfer data.
2) By using Export and Import utilities.
I told first one to my interviewer, he told, its strange, by using, COPY command also can we transfer data ? As far as i know, we can transfer data. Am i right ?
Thanks in advance,
Pal

transfer data from one database to another database.You mean store the data of one to another?
1) Create database link/connection string and using this string and COPY command, we can transfer data.every SELECT on a DB-link is transfering data. And you can have all kind of transfers and store on the e.g CTAS of materialized views or.... the SQL*PLUS COPY :
The COPY command is not being enhanced to handle datatypes or features introduced with, or after Oracle8i. The COPY command is likely to be made obsolete in a future release.
But there are many others. Check for ORACLE Streams, and the "COPY" your interviewer was mentioning is about the operating file system COPY right? That's transportable tablespaces.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces013.htm#ADMIN11403
-- andy

Can I use flash drives to transfer data from one MBP to another at a differ

I've looked and cannot find any info on the use of flash drives. Can I use a flash drive to transfer data from one MBP to another one at a different location? (ie; school Apple and home MBP) Grade tests and papers at home, enter data into home computer, then put it on flash drive and carry flash drive to school, transferring data to school desk top? Are certain flash drives preferrable over others, name brands, size, etc?

Yep, you sure can. Just about any drive will work as mentioned above. But I'm partial to SanDisk and PNY. I've used both and they work great! Currently I carry both a 2GB SanDisk Micro Cruzer and a retractable 2GB SanDisk Cruzer, both really nice. Replaced my oldie but goodie 256MB PNY drive that I've been using since they first came out.

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
Post relates to: HP TouchPad (WiFi)

@MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Transfer data from one database to another without identities but keep the relation b/w PK and Foreign key

Hi,
I need to transfer data from one database to another database (both are identical databases).
1. Not transferring identity columns (primary keys). the destination table might have the same key.
2. keep the PK's and FK's relation b/w parent and child table
3. I have 4 levels
Example: tableA (col1 int identity(1,1) , col2, col3)
tableB (col1 int identity(1,1) ,
col2 , col3) -- col2 has the foreign key relation with tableA.col1
tableC (col1 int identity(1,1) ,
col2, col3) -- col2 has the foreign key relation with tableB.col1
tableD (col1 int identity(1,1) , col2, col3) -- col2 has the foreign key relation with tableC.col1
please advise me.
Thanks in advance

Try the below:
/********************************SAMPLE TARGET***************************************************************/
Use MSDNSamples
create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
Insert into TableA(name) Select 'R1'
Insert into TableA(name) Select 'R2'
create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
Insert into TableB(name,LevelValueID) Select 'Childname1',1
/********************************SAMPLE TARGET***************************************************************/
/********************************SAMPLE SOURCE***************************************************************/
Use Sample
create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
Insert into TableA(name) Select 'C1'
Insert into TableA(name) Select 'C2'
create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
Insert into TableB(name,LevelValueID) Select 'Kidname1',1
/********************************SAMPLE SOURCE***************************************************************/
USe MSDNSamples
/********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
--Migration table
Create table Mg_TableA(LevelValueId int, NewValueId int)
/********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
/********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
MERGE INTO TableA
USING sample.dbo.TableA AS tv
ON 1 = 0
WHEN NOT MATCHED THEN
INSERT(name) Values(tv.name)
Output tv.levelValueId ,inserted.LevelValueid INTO
Mg_TableA;
/********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
/********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
Insert into TableB (name,LevelValueID)
Select A.name,B.NewValueId From sample.dbo.TableB A
Inner join Mg_TableA B on A.LevelValueID = B.LevelValueId
/********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
/********************************TEST THE VALUES***************************************************************/
Select * From TableA
Select * From Mg_TableA
Select * From TableB
/********************************TEST THE VALUES***************************************************************/
Drop table TableB,Tablea,Mg_TableA
Use Sample
Drop Table TableB,Tablea

How to transfer data from one macbookpro to another

how to you transfer data from one macbookpro to another. the other one was stolen.

If your computer was stolen and you don't have a data backup, you can't transfer data from the stolen computer to your new one. If you have a data backup, restore the data to the new computer.

How to transfer DATA from one machine to another using DBlink

I want to transfer data from one machine to another both having oracle 8.0.5 with AIX operating system using DB link. CAn any one help me in this task

Step one - Create and test SQLNet connections between the databases.
Step two - Create at least on database like from one database to the other:
CREATE DATABASE LINK linkname
CONNECT TO user identified by password
USING 'tnsnamesentry';
Step three - use the dblink linkname in dml statements eg:
insert into emp@linkname
(select * from emp);

How to transfer data from one system to another by datamart please give de

how to transfer data from one system to another by datamart please give details

Hi Deba,
Find the below SAP help doc which may help u...
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also find the below threads...
Loading data from one cube to another cube.
data copy from infocube to infocube in two different BW systems
Delta when loading from ODS to ODS
reg datamart
Data mart flag
Regards,
KK.

Transfer data from one DATASET to another DATASET

Hi,
Is there a way to transfer the data from one DATASET to another DATASET?
I tried the following
OPEN DATASET DS1 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT .
OPEN DATASET DS2 FOR INPUT IN TEXT MODE ENCODING DEFAULT .
TRANSFER DS2 to DS1.
CLOSE DATASET DS1.
CLOSE DATASET DS2.
But it does not work.
Thanks in advance.

Hi Jason,
This logic transfers data from one dataset to another....Kindly check..
DATA fname(60) VALUE 'myfile'.
DATA fname2(60) VALUE 'myfile1'.
TYPES: BEGIN OF line,
         col1 TYPE i,
         col2 TYPE i,
       END OF line.
TYPES itab TYPE line OCCURS 10.
DATA: lin TYPE line,
      tab TYPE itab.
DO 5 TIMES.
lin-col1 = sy-index.
lin-col2 = sy-index ** 2.
APPEND lin TO tab.
ENDDO.
"writing data to file fname.
OPEN DATASET fname FOR OUTPUT IN BINARY MODE.
LOOP AT tab INTO lin.
TRANSFER lin TO fname.
ENDLOOP.
CLOSE DATASET fname.
"reading data from fname and writing to fname1.
OPEN DATASET fname2 FOR OUTPUT IN BINARY MODE.
OPEN DATASET fname FOR INPUT IN BINARY MODE.
DO.
READ DATASET fname INTO lin.
IF sy-subrc <> 0.
    EXIT.
ELSE.
    TRANSFER lin TO fname2.
ENDIF.
ENDDO.
CLOSE DATASET fname.
CLOSE DATASET fname2.
"displaying data from fname2.
OPEN DATASET fname2 FOR INPUT IN BINARY MODE.
CLEAR lin.
DO.
READ DATASET fname2 INTO lin.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
WRITE:/ lin-col1, lin-col2.
ENDDO.
CLOSE DATASET fname2.
Mdi.Deeba
Edited by: Mdi.Deeba on Feb 17, 2009 8:11 AM

How can I transfer data from one iPhone to another iPhone which is already set up?

I have an old phone that I want to transfer data to. The phone is set up with previous data. How do I transfer current data to it?

if the iphone have not been synced with another computer then just sync it with yours
if it have then you cant syncing it with your computer would then clear the iphone and adding the info from your itunes to it

How can I transfer data from one phone to another

I have a damaged iPhone 3 and am trying to transfer data to another iPhone 3. How can I do that?

take a look at the link http:///support.apple.com/kb/HT2109

HT1296 How do I transfer data from one ipad to another one?

I have the orginal ipad and my husband bought me the retina one this weekend. I need to transfer the data on it to the new one.
Also how do I transfer the ownershlip of one to another as we were going to give one of the older ones we have to my granddaughter to
play games on and use?

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
 Cheers, Tom

Can you transfer data from one iPad to another iPad

Can you transfer data, books and music from one iPad to another .

You can use iCloud to sync your books and music bought in the iTunes Store, but for anything that you didn't purchased in iTunes Store you must use iTunes

Transfer data after Network Confirmation to another Work Center?

Similar Messages

Maybe you are looking for