Transfer data displayed from a standard tcode into an exl file

hi all,
my requirement is to transfer data displayed in tcode vf03 to an exl file.
using the list option it is not possible .
plz help.
regards

you can write small query in SQ01 with all required fileds and download it to Excel

Similar Messages

How to preserve data when converting a Standard DSO into a Write Optimized

Hi,
I'm looking for proven strategies for preserving data when converting a standard DSO into a write optimized DSO. The data has to be dropped before the new DSO is transported into the environment.
1. The DSO is currently in synch with a cube,
2. The PSA does not have all the data which is in the DSO.
3. Data volume is incredibly high for a full reload from ECC, so we'd like to avoid that option.
Appreciate any help!

Hi Gregg,
have you considered just deleting the data? I know that sounds simple, but it might be a valid solution.
If the DSO is just receiving new data (e.g. FI documents), you can continue to deliver a logically correct delta to the cube.
Should that not be possible and you really want all data that you currently have in your DSO1 in the write optimized future of it, then how about this:
- Create a new DSO2 same structure as DSO1
- Load all data into that
- Delete all data from your DSO1 and import the transport to make it write optimized
- Load all data back into you now write optimized DSO1 from DSO2
The problem you have then, is that all data that you have already loaded into your cube is due to be delivered as a delta from DSO1 again.
Depending on your transformation / update rules that might or might not be a problem.
Best,
Ralf

While Creating New Insert Form Existing Data Display from the Table

Hi
I am New To Sun Java Studio Creator and New to Java Also While Creating New Insert Form Existing Data Display from the Table while i am Run the Form. Can any one help me to Solve this one

Dear Giri,
As per your Advise, Literally I have Search the Properties for the Components to set value Null, but I am Unable to find the Value in Properties palate. I have tried in various options like
In the Properties Palate
TextField1_onselect use Value null
TextField1_text I have selected use Value option and I have manually Keyed-in null;
In the JSP Page, I have manually keyed in the null value below said
<ui:textField binding="#{BI.textField2}" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
<ui:textField binding="#{BI.textField2.Value = null }" id="textField2" style="position: absolute; left: 240px; top: 96px" text="#{BI.bDataProvider.value['ISSUENO'] = null}"/>
At last I am Failure. I am ignorant of it. Can you please help me on this where I have to set null value for the components? I will be very kind of you

Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form.

Hi
Is there a way to filter a drop down list by using the result main data display from"GetUserProfileByName" when open the form?
The second source has a huge list of company names that can be narrrow by email work.
background:SP 2010 and Infopath 2010
CRISTINA&amp MICROSOFT Forum

I'm not sure if I understood your question clearly but here is a good resource on how to get attributes from "GetUserProfileByName" web services:
http://blog.mangroveweb.com/pre-populating-an-infopath-from-with-mysql-data-using-a-net-web-service/using-sharepoints-getuserprofilebyname-web-service-to-retrieve-ad-account-information/
Regarding filtering dropdown list then this could be done by applying form on-load rules.
Hope this helps

I need to transfer my contacts from a HTC desire into itunes with a view to transferring them to my iphone 5 ... any ideas?

I need to transfer my contacts from a HTC desire into itunes with a view to transferring them to my iphone 5 ... any ideas?

You do not put contacts into itunes at all.
Iphone syncs contacts with Outlook, Address Book, etc on your ocmputer, not itunes.

How to transfer data retrieved from a bean, into requestScope

I have a jsf page called viewCustomer.jsp, which is backed by a controller/mbean with a name viewCustomerController.
This page is always called via a request which carries the customer accountID in its request attributes. Hence in order to load the customer details i am using a f:view beforephase call which acts before the render phase. This retrieves a number of beans from of different types. For example, each customer can have an address.
each addressbean has an ID field which is the primary key to the addresses. If i want to delete the address, i need to send this primary key via a requestAttribute to a controller which will delete it.
hence to delete the address i have a form such as:-
<h:form>
<h:inputHidden value="#{viewCustomerController.customerAddressBean.id}" />
<h:commandButton value="Delete Address" action="#{viewCustomerController.deleteCustomerAddress}" />
</h:form>
The problem with this, is that because the addressbean is only added before the render phase, on presssing the delete address button, i get a null exception, because customerAddressBean doesnt exist yet.
What i want to do, is that upon pressing the delete address button, the id value should be immediately sent to a requestAttribute called 'addressId', and not back to the backing bean.
i. e. (if jsf had an assignment operator) it would be something like
<h:form>
<h:inputHidden value="requestScope.addressID = #{viewCustomerController.customerAddressBean.id}" />
<h:commandButton value="Delete Address" action="#{viewCustomerController.deleteCustomerAddress}" />
</h:form>
basically, the data should be read from the backing bean, but it shouldnt be written back to the backing bean.
now i realize that if i allow my database to repopulate the backing bean earlier, the customerAddressBean will be populated, and then the first listing would work. But that would require a second set of trips to the database with no meaning but to repopulate the backing bean which seems like quite a waste.
In the case of the address, i could populate the propertly with a dummy addressbean, but this would not work in the case of properties which are lists of beans.
So in summation. How do i transfer data that has been read from a property of a backing bean, into a request attribute on a commandbutton click, without putting the data back into the property of the backing bean.

Hello Anu,
There are different hardware options that you have here. The basic things that you need to keep in mind is that the PDA that you purchase runs on Pocket PC and has either a CompactFlash or a PCMCIA slot in it. The driver that you would be using for your LabVIEW PDA application would NI-DAQmx Base Ver 2.0.1. You can refer to its readme for more information on the supported hardware. Also you can check at this page for more information on the supported devices. About your original question, using LabVIEW PDA you can create a text file for storing data and separate the data points with a comma. So that this way you would be able to open the file in Excel if you wanted to. All the file I/O related VIs can be found in the function palette at Programming >> File I/O.
Regards,
Chetan K.
Application Engineer
National Instruments

I had problems with my computer as a result I have lost all my music from my itunes account. Does anyone know how to transfer the music from ipod touch back into itunes?

Hi, My computer recently got wiped. When everything was re-installed I found that I had no music in my itunes account. It is all on my ipod touch (and very old ipod) but I cannot figure out how to transfer it from the ipod touch into my itunes. Can anyone help? Thanks in advance A

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Error updating data source from SQL Server ODBC into SQL Native Client 10.0

I am converting Crystal 8.5 reports into Crystal XI release 2. The data source was ODBC using SQL Server 2000 and pointing to a stored procedure. In the new server the data source has to be ODBC again, but it uses the SQL Native Client 10.0 Driver, because the new server is SQL Server 2008. I have copied the same old stored procedure on the new server and it works fine as a data source to a brand new Crystal XI report. But when I am opening an existing 8.5 version crystal report and updating the data source to the new location I get the error message "Some tables could not be replaced, as no match was found in the new data source".
I thought I could tackle this error by creating a temporary data source using the standard ODBC SQL Driver linked to the SQL 2008 Server instead of the SQL Native Client 10 ODBC. So I first updated the crystal data source to link to this temp ODBC using SQL Driver and it worked fine. But after that, when I try to update the data source to link to the SQL Native Client 10 ODBC, I get the same error again.
So I guess that the problem is not the new server itself, but the switch between SQL Server ODBC and SQL Native Client 10 ODBC.
Does anyone know what's going on with this SQL Native Client 10 in updating crystal report data sources?

CR XI does not support that driver. Try selecting the Native driver or upgrade to CR XI R2 for free and use SP4, 5 and 6 and then FP 6.4 or upgrade to CR 2008 and SP 3 and Fix Pack 3.3
Thank you
Don

Need to transfer data records from one version of sap to another version of

hello,
i have a requirement where i need to transfer the tables with the records in it from sap r/3 4.7 version to sap ecc 6.0 version,now the present issue is how to tranfer the data records from old version to new version......kindly help me in this requirement

Hi,
Write a program in SAP 4.7 to download all records to a flat file. Then write a program in ECC6 to upload all records from the flat file...........
Thanks,
Aditya.

Allowing some Att types to transfer data to HR infotype using Tcode CAT6

Dear Experts,
I would like to know is there any option to allow only some attendance types to transfer data from CATS to HR info type 2002 using transaction code CAT6.
With regards,
Chandra Sekhar

Hi Revathi,
Using transaction code CATS_APPR_LITE I changed the processing status from 20 to 30 and updating in HR Master info type 2002 or 2001.
But in this T.code there is a problem that even if it is personnel number locked this will not update the infotype and will not give any error message.
So again I used CAT6 T.code with repeated transfer and status "Last retrivel unsuccessful" and updating selected attendance and absence types to HR Master.
With regards,
Chandra sekhar

What cable do I need to transfer data direct from my iMac to my macbook pro

What cable do I need to tranfer data direct from my iMac to my MacBook pro?

Generally, Ethernet or FireWire.
(71181)

Show alert after data display from the form

After query, if date of birth is NULL then display message, but this message must pop up after data displays on the form.
I try different post triggers, when-new-item-instance, when-validiate-item trigges, they all display message BEFORE the data. Any suggestion?
Thanks

hi kathy,
What you have to do is after the commands to display the data, you give the builtin SYNCHRONIZE; then give message statement. It should work.
Murthy

How to export from a mysql table into a txt file?

I an trying to export the result of a select query into a txt file, and I used the command:
SELECT * INTO OUTFILE "D:\OUTFILE.TXT" FROM USERS;
It replies: access denied.
Do I need some special privilege to do the operation? Or is there anything wrong with the command? Can anybody please help me?

I tried the statement and it worked for me.
SELECT * INTO OUTFILE "C:\OUTFILE.TXT" FROM `certificationtype`
If I did it on the drive MySQL was installed on (C:) and the file ended up in the directory C:\mysql\data.
SELECT * INTO OUTFILE "D:\OUTFILE.TXT" FROM `certificationtype`
If I did it to drive D: it ended up in the root.
Note the command will fail if the output file exists.
Do you have rights to the root of d:?
rykk

Saving a series of images (from a smart camera) into an AVI file

Hello,
I have a lab setup in which we view brain cell deflections in a well-plate after being pressurized with air for 50ms. I have a smart camera hooked up to an IMAQ PCI card to acquire images.
I'm trying to save the series of images into an avi file, so that I can view the deflections in a slow video.
The way I have it set up at the moment takes an image and saves it in an avi pre-existing (some random .avi that I didn't need) format. But here are some problems:
1. I would like for the VI to create a NEW .avi, rather than saving it into a pre-existing one.
2. Right now, each image simply overwrites the previous one in the avi file. So the resulting avi is a 00:00 length movie with a single image (the last frame that camera viewed).
I have what I have programmed attached. Any help would be appreciated.
Thank you,
B.J. Kim
University of Michigan
Solved!
Go to Solution.
Attachments:
forum.jpg ‏1438 KB

Here is an updated version (attached). I kept trying to incorporate the examples you showed me, and I have made a little bit of a progress.
It now saves a new avi file, and it's not a single image movie anymore. It's got as many images as I run the VI for. BUT, it only saves the very first image the camera takes and just loops it over and over again until I press stop. So the resulting avi shows a still image of the very first view of the camera for however long I ran the VI for.
Any suggestions on how I can fix this?
Thank you,
B.J.
Attachments:
forum2.jpg ‏1190 KB

Get information from an array saved into a text file

I am trying to get information from an array saved as a text file to extract the information to build an string. This string will go out from the serial port to a device which will listen this message and it will answer the question. All the information sended sequencially it has to be obtained from that array. Every row contain one instruction and this has to be sended one after one.
Could you tell me if is possible to make this driver? And if you have a similar driver, Where can I get it from?

The VIs that I would suggest using are found in the String Function Pallet:
Spreadsheet String To Array
Array To Spreadsheet String
The delimiter should be the termination character. These VIs will adapt to a string array.
For the Spreadsheet String To Array wire an empty string array and use %s as the format. The delimiter should be the termination character of the text file, most likely a end of line (\r\n).
For the Array To Spreadsheet String the delimiter should be the termination required for your serial device.
Using a combination of these two VIs should provide you the functions required to make the driver.

Transfer data displayed from a standard tcode into an exl file

Similar Messages

Maybe you are looking for