Transfer data from a pc to an IPhone

Hello there,
can anybody tell me how I can transfer data from a pc (Linux Ubuntu) to an IPhone?
Thank you very much in advance.
Regards
Wolfgang

Iphone requires itunes.
As far as I know itunes does not run on Linux Ubuntu.

Similar Messages

  • How do i transfer data from my computer to my iphone?

    how do i transfer data from my computer to my iphone?

    Install iTunes in your computer and sync.
    This article may help with the whole process:
    http://support.apple.com/kb/HT1345?viewlocale=en_US

  • How do I transfer data from a blackberry to an iPhone?

    My partner is getting rid of Blackberry and moving to iPhone 4S.
    is there a way to transfer contacts and calendar from an exchange server?
    Thanks

    You can transfer the info to a supported program on the PC, such as Outlook and set up the iPhone to use Outlook to sync the contact info from.
    Also check this thread: https://discussions.apple.com/message/12825171#12825171

  • How do I transfer data from one iPhone to another?

    How do I transfer data from one iPhone to another?

    If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
    Here's how...
    Connect your old Apple device to WiFi and to a power source.
    Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
    iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
    Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
    When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
    Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
    When the restore process is complete, your iPhone will restart and be ready to use.
    Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

  • Transfer data from BB Torch to IPhone 5S

    Will an Apple Genius at the Apple Store transfer data from my BB Torch to my new IPhone 5S

    I'm not sure an Apple store will do this, but your carrier can usually do this for you if you visit one of their retail stores.

  • I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone

    I need to transfer data from my old iphone to my new iphone and I cannot turn off Find my iphone as my icloud password is incorrect.  I have reset this several times and also cleared cookies history etc.  none of the above makes a difference.  Any ideas?

    The ONLY thing you can do to turn off Find My iPhone is to have the correct password. There is no way around it. You can get help with the password: If you forgot your Apple ID password
    If none of those methods are possible: Apple ID: Contacting Apple for help with Apple ID account security

  • How to transfer data from one phone to another

    my daughter got a new phone.  she is trying to transfer data from her old phone.  she cant remember her icloud password.  we can't have them email because the email uses the same password.  If i delete the account all the information we are trying to transfer will be lost.  Any idea how to retrieve the password?

    You transfer data to a new phone by backing up the old one, then restoring the backup to the new one (see http://support.apple.com/kb/ht2109).
    Also, deleting the account only deletes it from the phone, not from iCloud.  But if you're running iOS 7 with Find My iPhone turned on you'll need the password in order to delte the account.
    If you need to reset the password, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Transfer Data from Palm OS to BlackBerry 10 Smartphones - US

    (I am Posting this a 2nd time because I'm not sure it went through the first time; got some kind of authenication error message.) 
    - 1. What is the best way to transfer my PIM Organizer Data from my Palm TX to a BlackBerry Z10?
    - 2. How do I obtain the standalone BlackBerry Desktop Software, latest Build of v.6.1? or even a version later than 6.1? or should I obtain v.5.0.1? or v.4.7?
    I am currently a U.S. Cellular customer and when they make the BlackBerry Z10 available, I plan to switch from my Motorola feature phone to the Z10. I currently also use a Palm TX PDA (Palm OS Garnet v.5.4.9) and use Palm Desktop Software v.4.2 ( = the CD installation version of
    v.4.1.4e?) on a Windows XPmachine. I could upgrade the Palm Desktop to v.6.2.2, but I haven't because v.4.2 on Windows XP is working well for me.
    The support page for Z10, Transfer from iPhone & Android to BlackBerry 10 Smartphones - US ( http://us.blackberry.com/support/transferring-to-bb10-device/personal.html ) implies that it does not support direct transfer from Palm OS to BB v10; only transfers from Androids and iPhones, as well as from other BBs, are supported. I have searched your Knowledge Base and found several articles that tell me how to migrate my PIM data from Palm OS to earlier versions of BlackBerry. I then presume that once I have my data imported into the earlier version of BB Desktop I can then later import it into the BB10 Desktop software; am I correct?
    Here are the Knowledge Base articles I found:
    1. Article ID:
    KB03050 ( http://www.blackberry.com/btsc/KB03050 ) - How to transfer contact information from a Palm OS device to a BlackBerry smartphone
    2. Article ID:
    KB04346 ( http://www.blackberry.com/btsc/KB04346 ) - Field mapping list for the PIM Data Migration Wizard
    3. Article ID:
    KB04437 - ( http://www.blackberry.com/btsc/KB04437 ) How to use the organizer data migration wizard
    4. Article ID:
    KB05421 - ( http://www.blackberry.com/btsc/KB05421) What is the Switch Device Wizard?
    The four articles all give slightly different advice, but
    Articles # 2 & 4
    imply that I can export the PIM data from Palm to BlackBerry Desktop Manager
    v.5.0.1
    and seem to have the most simple and clear instructions. However,
    Article #3
    implies that I should use BB Desktop Manager no higher than
    v.4.7
    , and
    Article #1
    implies that I can use BB Desktop Software as recent as
    v.6.1
    and use "Method #2", which seems very long and complicated by transferring data to
    Microsoft Outlook
    as an intermediary step!
    So I am confused as to which method to use.
    Articles #2 & 4 & BB Desktop software v.5.0.1 seem the simplest, but if I need to use the latest possible version, 6.1 with Outlook as an intermediary to get superior results, then I am willing to follow this more complicated method as described in article #1. I want to use the method that will give me the best results with the lowest error rate, even it may be the most complicated way.
    ... Help!
    P.S.
    I also use
    Agendus for Windows Palm Desktop Edition v.5.42( http://www.iambic.com/agendus/winpded/):
    "Agendus for Windows is an application that enhances how you view your calendar, contacts, tasks and memos. It also provides intuitive tools, such as text capturing, a free time finder, voice recording, advanced search capabilities and Internet features (weather, driving directions, address lookup). All of these things help in make scheduling extremely easy and hassle free."
    It can form hypertext links between the separate databases of the Palm Desktop (calendar, contacts, tasks and memos) so you can flip back & forth between the databses without having to close one before you open the other.
    There's also an
    Agendus for BlackBerry version (
    http://www.iambic.com/agendus/blackberry/
    ), but was developed pre-BB 10, and I think the code is sufficiently different between the BB and Palm versions, that I don't think it is easy to transfer data between them since the BlackBerry version synchronizes with Agendus for Windows Outlook Edition ( http://www.iambic.com/agendus/winoued/).
    When I transfer my PIM data from my Palm to a BB-Z10, will I be able to keep those active hypertext links in Agendus in the transfer and still have them work?
    P.P.S.
    I also have
    Palm Desktop by Access v.6.2.2 ( http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/solutions/article/32859_en.html )installed on a Windows 7 machine, but I find that v.4.2 w/ the Windows XP machine tends to work better. However, I am willing to use whatever combination of Palm Desktop version together with Windows OS version that will get me the best and most accurate results. Palm Desktop v.6.2.2 also has an extension called Palm Conduit Switcher Application (OutlookSwitcher.exe v.1.3.0, which is accessible through Start > Palm > PIM conduit sync > Sync with Outlook) which supposedly will change my Palm handheld to sync w/ Outlook instead of with Palm Desktop; would that accomplish the same thing as Article #1 (ID: KB03050 > Method 2 > Tasks 1,2 & 3) and maybe be easier or do it better? But it would seem that the KB03050 method would leave my Palm Desktop intact, whereas the OutlookSwitcher application could delete my Palm Desktop in a process that would convert my data permanently to Outlook; am I correct? An earlier version of OutlookSwitcher.exe also is included in Palm Desktop v.4.2.
    There are so many questions and options for me, I don't know which way to go! If you and your colleagues don't know the best way either, then I will most likely follow the advice in KB03050 in conjunction w/ upgrading my Palm Desktop to 6.2.2 on my Windows XP machine, since I would have the most control over datafield mapping, and the extra work spent doing that may pay off with a smaller error rate after the transfer, which gets me back to my second question at the top of this article: How can I obtain a copy of the latest Build of BlackBerry Desktop Software v.6.1 as a stand-alone application into which I can transfer all my PIM Data first, *before* I install & syncronize the new BB10 phone? Or should I use a version later than 6.1?
    Sorry for this being so long and convoluted, but after going through all the permutations and combinations, it should be obvious to you that I now need the support of someone more expert and experienced in this before I do anything else. Thanks!

    Hey telemarkdoc,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Currently you can not transfer data from a Palm smartphone to a BlackBerry 10 smartphone through BlackBerry Link.  Also previous versions of BlackBerry Desktop Software will not work with BlackBerry 10 smartphones.
    The only way this could work is that you transfer the information from the Palm software to Microsoft Outlook and then BlackBerry Link can synchronize the contacts and calendar information to the BlackBerry Z10.
    I hope this helps.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • How to transfer data from Iphone4s to Iphone6plus

    how do I transfer data from iphone 4s to iphone6plus?

    You can use iCloud or iTunes to backup your old iPhone 4s and then restore to your iPhone 6. Check: Transfer content from an iPhone, iPad, or iPod touch to a new device
    iCloud and iTunes can backup and restore almost all data, but it still can't backup non-purchased music, movies and more. Besides, it only backup photos in the Camera Roll. If you want to backup such kinds of data, you need some third-party tool, like TunesGo.

  • How do I transfer information from my android to my iPhone?

    I'm brand new to the world of Apple and just got an iPhone 5 and a macbook pro.  I want to transfer all the information (contacts, photos) from my android to my new iPhone, but I'm not sure how to do that.  Thanks!

    As an Android Phone user, I'd like to share my experience of transferring data between Android Phone and iPhone with you.
    As far as I am concerned, Phone Transfer is the best Android Manager tool that I have ever used. It can transfer information between Android phone and iPhone in seconds. It can help you push contacts from your iPhone to android phone with a click, also transfer information from your android phone to iPhone easily.

  • How do you transfer data from old iPad to a new iPad?

    How do you transfer data from old iPad to a new iPad?

    iOS- Transferring information from your current iPhone, iPad, or iPod touch to a new device
    How to Transfer Everything from an Old iPad to New iPad
    iTunes Store- Transferring purchases from iOS device or iPod to a computer

  • HT1296 how do we transfer data from i4 to i5 after sync to computer

    how do i transfer data from i4 to i5 after sync to computer

    iOS: Transferring information from your current iPhone, iPad, or iPod ...

  • How do i transfer data from one internal tabe to another.

    Hi All,
             How do i transfer data from one internal tabe to another.
             Can i do it ebven if he tables are different in structure.
    Please Advice.
    Thanks in advance.

    Hi Saket Tiwari,
    I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
    explanation of how you can populate an internal table.
    1) Append data line by line.
         Syntax :  APPEND [<wa> TO / INITIAL LINE TO] <itab>.
    this appends new line to internal table <itab>.
    2) Using COLLECT statement.
                 COLLECT is another form of statement used for populating the internal tables.  Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
         Syntax : COLLECT [<wa> INTO] <itab>.
    3) Using INSERT statement
         Syntax  INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
    INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
    Now coming to your request..
    To append part or all of an internal table
         Syntax
                  APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
    *     Note:
    Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
    b) To insert part or all of an internal table into another internal table
         Syntax
              INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
              INTO <itab2> [INDEX <idx>].
    c) Using Move statement.
    To copy entire contents of one table into another in one execution
         Syntax MOVE  <itab1> To <itab2>.
                   OR
              <itab1> = <itab2>.
    but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
    These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line  the syntax becomes,
    ITAB1[] = ITAB2[].
    Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
    for this we use    
                                MOVE-CORRESPONDING <itab1> TO <itab2>
        this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
            sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
    I hope the information provided has been of your help.
    Reward if useful.
    Regards,
    Jose

  • How do I transfer data from one exterior harddrive to another?

    How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

    Depends what you want to transfer...
    A few more Details about what you are trying to achieve would be good.

  • Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working

    Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working.

    Merging of Apple ID accounts is not possible.

Maybe you are looking for

  • Question about Windows File Explorer and offline attribute display

    In previous releases of Windows (including Windows 8), Windows File Explorer would display a small "x" icon if the offline file attribute was set.  In Windows 8.1, Windows File Explorer no longer displays the "x" icon if the offline file attribute is

  • Reader e-signature problems.

    I am trying to create an electronic signature using Reader X and when prompted to enter password only one field is visible.  I have created signatures on other stations without problems.  Other stations have 2 password fields.  On this station there

  • Problem with a ColdFusion (Queries spend a long time to return)

    Hy guys My team have a problem with a Coldfusion (version 8,0,0,176276). Apparently this issue has a relation with queries that spend a long time to return some result, making the poll to open more connexions with the database until stop the applicat

  • "Space Before" Paragraph after Page Break

    Hello, Here is what I am observing : the "Space Before" setting for paragraph styles is ignored if the paragraph is placed after a page break or on a disconnected page. How do I force InDesign to honour my "Space Before" setting ? I give you an examp

  • Satellite C670D-10W - Task manager shows 100% CPU usage

    My brand new laptop with factory installed windows 7 and all programs by Toshiba nothing addded shows 100% processor usage in task Manager and works pretty slow. The sum of 80 odd processes shown in task manager never reaches more than 30-50 % but bo