Transfer Data from a WAS for ABAP to the SLD

Hello everybody,
we have recently installed the ERP04 (Java+ABAP) and are wondering how we can publish the ABAP part to the SLD which came with the J2E Engine. Within the J2E Engine its simple, as can use the Visual Administrator, but how can this be done from the ABAP System?
regards, Markus

nevermind, solved it myself

Similar Messages

Transfer data from hardrive asking for password??

when i'm transfering data from hardrive to my new mac its asking for password for my old computer which i don't have what to do???/

nevermind, solved it myself

How to transfer data from one MBP to another on the same wireless network?

Hello All,
My wife & I both have MBP's & are connect to the internet wirelessly via a Comcast-supplied Arris modem & a Belken router I purchased.
Please don't laugh too hard but when I share data with my wife I, first, transfer it onto a flash drvie, then I walk to my wife's mbp & transfer the data from the flash drive to her mbp.
I have a feeling there is a better way. Since I guess we are on the same network can I do this wirelessly some how?
Any help would be appreciated!
Thanks in advance.
Jim

here is a link to some information on AirDrop --
http://support.apple.com/kb/HT4783?viewlocale=en_US&locale=en_US

Transfer data from mac to external hard drive

I am new to macs and am a bit lost.
I have a made up external hard drive (internal hard drive in a case) - TOSHIBA MK8025GAS Media. It is connected to the mac via USB.
I have been using it to transfer data from my pc to mac. The mac sees it and i can copy things from the hard drive to mac without problems. What i cannot do is to transfer from the mac onto the hard drive.
I pulled up the mac info of the hard drive and its both writable and ejectable (Has two partitions). In the partitions the info states that the owners aren't enabled, cannot turn owners off and cannot be formatted. Also the S.M.A.R.T. status is not supported. Not usre what all this means!
Can anyone tell me how to set it up to be able to transfer files to the hard drive from the mac and if it is possible to still transfer from windows to the hard drive?
Thank you in advance.

Thank you for the info.
A friend also told me that i could erase the hard drive using the disk utility in ms dos format. I have tried this and then could also partition it afterwards.
At the moment this seems to be working in both Mac and PC.
One thing i have noticed is when i try to transfer disk images (over 4Gb), near the end i get an 'unexpected error occured' (error code 1309).
From the internet:
error -1309 fileBoundsErr: file's EOF offset mark or size is too big
Whatever this means?

Storing data in data bag with webdynpro for abap

Hi,
It´s possible to store data in data bag with webdynpro for abap?
The EPCF client data bag API provide methods to store data in a transient data buffer on the client:
EPCM.storeClientData(nameSpace, name, value)
Does webdynpro for abap has an equivalent method?
Thanks,
Márcio

Web Dynpro ABAP can produce a portal event and pass parameters along with the event. These parameters can be read by any event receiver. However you don't have directly access to the data bag as you describe. Here is a link to the help on the Portal Event API:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/da/f96f4132f15c58e10000000a1550b0/frameset.htm

I recently purchased an iPod touch for my classroom. Can I use homesharing to transfer data from an app to my student's computers?

I recently purchased an iPod touch for my classroom. Can I use homesharing to transfer data from an app to my student's computers?

No since you can only sync with one computer.
To switch syncing computers:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How to transfer data from legacy system to SAP

Hi Friends,
I would like to know the process and the steps followed to transfer data from my legacy system to SAP.
Suppose if i have all the data in the form of Excel sheet or doc type. How can i transfer this data into SAP.
Please explain the steps followed.
Appreciate your help
Anil

Hi ,
Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
the below link gives a brief explanation of the LSMW tool
http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
There are various methods to upload data within LSMW. If the number of records are very high like Article Master or Conditions for Retail the IDOC method must be used.
Standard IDocs
1. Article Master - ARTMAS
2. Conditions - COND_A
3. Source list - SRCLST
4. Customer Master or WRF3/WRF6 tables - DEBMAS
5. Vendor master- CREMAS
Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
Regards
Prabhu

Transfer Data from Palm OS to BlackBerry 10 Smartphones - US

(I am Posting this a 2nd time because I'm not sure it went through the first time; got some kind of authenication error message.)
- 1. What is the best way to transfer my PIM Organizer Data from my Palm TX to a BlackBerry Z10?
- 2. How do I obtain the standalone BlackBerry Desktop Software, latest Build of v.6.1? or even a version later than 6.1? or should I obtain v.5.0.1? or v.4.7?
I am currently a U.S. Cellular customer and when they make the BlackBerry Z10 available, I plan to switch from my Motorola feature phone to the Z10. I currently also use a Palm TX PDA (Palm OS Garnet v.5.4.9) and use Palm Desktop Software v.4.2 ( = the CD installation version of
v.4.1.4e?) on a Windows XPmachine. I could upgrade the Palm Desktop to v.6.2.2, but I haven't because v.4.2 on Windows XP is working well for me.
The support page for Z10, Transfer from iPhone & Android to BlackBerry 10 Smartphones - US ( http://us.blackberry.com/support/transferring-to-bb10-device/personal.html ) implies that it does not support direct transfer from Palm OS to BB v10; only transfers from Androids and iPhones, as well as from other BBs, are supported. I have searched your Knowledge Base and found several articles that tell me how to migrate my PIM data from Palm OS to earlier versions of BlackBerry. I then presume that once I have my data imported into the earlier version of BB Desktop I can then later import it into the BB10 Desktop software; am I correct?
Here are the Knowledge Base articles I found:
1. Article ID:
KB03050 ( http://www.blackberry.com/btsc/KB03050 ) - How to transfer contact information from a Palm OS device to a BlackBerry smartphone
2. Article ID:
KB04346 ( http://www.blackberry.com/btsc/KB04346 ) - Field mapping list for the PIM Data Migration Wizard
3. Article ID:
KB04437 - ( http://www.blackberry.com/btsc/KB04437 ) How to use the organizer data migration wizard
4. Article ID:
KB05421 - ( http://www.blackberry.com/btsc/KB05421) What is the Switch Device Wizard?
The four articles all give slightly different advice, but
Articles # 2 & 4
imply that I can export the PIM data from Palm to BlackBerry Desktop Manager
v.5.0.1
and seem to have the most simple and clear instructions. However,
Article #3
implies that I should use BB Desktop Manager no higher than
v.4.7
, and
Article #1
implies that I can use BB Desktop Software as recent as
v.6.1
and use "Method #2", which seems very long and complicated by transferring data to
Microsoft Outlook
as an intermediary step!
So I am confused as to which method to use.
Articles #2 & 4 & BB Desktop software v.5.0.1 seem the simplest, but if I need to use the latest possible version, 6.1 with Outlook as an intermediary to get superior results, then I am willing to follow this more complicated method as described in article #1. I want to use the method that will give me the best results with the lowest error rate, even it may be the most complicated way.
... Help!
P.S.
I also use
Agendus for Windows Palm Desktop Edition v.5.42( http://www.iambic.com/agendus/winpded/):
"Agendus for Windows is an application that enhances how you view your calendar, contacts, tasks and memos. It also provides intuitive tools, such as text capturing, a free time finder, voice recording, advanced search capabilities and Internet features (weather, driving directions, address lookup). All of these things help in make scheduling extremely easy and hassle free."
It can form hypertext links between the separate databases of the Palm Desktop (calendar, contacts, tasks and memos) so you can flip back & forth between the databses without having to close one before you open the other.
There's also an
Agendus for BlackBerry version (
http://www.iambic.com/agendus/blackberry/
), but was developed pre-BB 10, and I think the code is sufficiently different between the BB and Palm versions, that I don't think it is easy to transfer data between them since the BlackBerry version synchronizes with Agendus for Windows Outlook Edition ( http://www.iambic.com/agendus/winoued/).
When I transfer my PIM data from my Palm to a BB-Z10, will I be able to keep those active hypertext links in Agendus in the transfer and still have them work?
P.P.S.
I also have
Palm Desktop by Access v.6.2.2 ( http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/solutions/article/32859_en.html )installed on a Windows 7 machine, but I find that v.4.2 w/ the Windows XP machine tends to work better. However, I am willing to use whatever combination of Palm Desktop version together with Windows OS version that will get me the best and most accurate results. Palm Desktop v.6.2.2 also has an extension called Palm Conduit Switcher Application (OutlookSwitcher.exe v.1.3.0, which is accessible through Start > Palm > PIM conduit sync > Sync with Outlook) which supposedly will change my Palm handheld to sync w/ Outlook instead of with Palm Desktop; would that accomplish the same thing as Article #1 (ID: KB03050 > Method 2 > Tasks 1,2 & 3) and maybe be easier or do it better? But it would seem that the KB03050 method would leave my Palm Desktop intact, whereas the OutlookSwitcher application could delete my Palm Desktop in a process that would convert my data permanently to Outlook; am I correct? An earlier version of OutlookSwitcher.exe also is included in Palm Desktop v.4.2.
There are so many questions and options for me, I don't know which way to go! If you and your colleagues don't know the best way either, then I will most likely follow the advice in KB03050 in conjunction w/ upgrading my Palm Desktop to 6.2.2 on my Windows XP machine, since I would have the most control over datafield mapping, and the extra work spent doing that may pay off with a smaller error rate after the transfer, which gets me back to my second question at the top of this article: How can I obtain a copy of the latest Build of BlackBerry Desktop Software v.6.1 as a stand-alone application into which I can transfer all my PIM Data first, *before* I install & syncronize the new BB10 phone? Or should I use a version later than 6.1?
Sorry for this being so long and convoluted, but after going through all the permutations and combinations, it should be obvious to you that I now need the support of someone more expert and experienced in this before I do anything else. Thanks!

Hey telemarkdoc,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Currently you can not transfer data from a Palm smartphone to a BlackBerry 10 smartphone through BlackBerry Link. Also previous versions of BlackBerry Desktop Software will not work with BlackBerry 10 smartphones.
The only way this could work is that you transfer the information from the Palm software to Microsoft Outlook and then BlackBerry Link can synchronize the contacts and calendar information to the BlackBerry Z10.
I hope this helps.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How do i transfer data from my old imac to my new macbook pro?, how do i transfer data from my old imac to my new macbook pro?

HOW DO I TRANSFER DATA FROM MY IMAC TO MY NEW MACBOOK PRO? I tried it with an ethernet cable and it seems to go OK till it gets to applications. From there the time it takes to complete seems to increase rather than decrease!

That's the easiest way, this side of using Time Machine. The time it takes to transfer files between our computers ka vary but while doing it on my MBP I had to leave it plugged in for near 24 hours and it was supposed to take 3.

Different ways to Transfer data from one database to another database

Hi all,
What are the ways to transfer data from one database to another database. With the following options, i Can transfer data as far as i know. Please
correct me if i am wrong or tell me if there is any other options are available.
1) Create database link/connection string and using this string and COPY command, we can transfer data.
2) By using Export and Import utilities.
I told first one to my interviewer, he told, its strange, by using, COPY command also can we transfer data ? As far as i know, we can transfer data. Am i right ?
Thanks in advance,
Pal

transfer data from one database to another database.You mean store the data of one to another?
1) Create database link/connection string and using this string and COPY command, we can transfer data.every SELECT on a DB-link is transfering data. And you can have all kind of transfers and store on the e.g CTAS of materialized views or.... the SQL*PLUS COPY :
The COPY command is not being enhanced to handle datatypes or features introduced with, or after Oracle8i. The COPY command is likely to be made obsolete in a future release.
But there are many others. Check for ORACLE Streams, and the "COPY" your interviewer was mentioning is about the operating file system COPY right? That's transportable tablespaces.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17120/tspaces013.htm#ADMIN11403
-- andy

Transfer data from ALV to Z table

Hi,
I need to confirm the exact procedure to transfer data from ALV into z table.I am entering few values at runtime in the ALV & need to populate the z table with the same.
I created a z table,it has been assigned a internal table & work area.A loop is there on the internal table passed to fieldcatalog.
LOOP AT GIT_EKPO INTO GS_EKPO.
    LS_ZPS005-EBELN = GS_EKPO-EBELN.
    LS_ZPS005-EBELP = GS_EKPO-EBELP.
    LS_ZPS005-ERECDAT = GS_EKPO-ERDAT. "this field is not passing value into z table
    LS_ZPS005-LINEID = SY-TABIX.
    LS_ZPS005-POQTY = GS_EKPO-POQTY.
    LS_ZPS005-EREQTY = GS_EKPO-EREQTY. "this field is not passing value into z table
ENDLOOP.
INSERT INTO ZPS005 VALUES LS_ZPS005.
When I assign the values from Internal table into internal table of z table,the values in fields populated at runtime does not come.
Please help me with your suggestions on the same.
Thanks.

Hi,
I tried the procedure,but do I need to include this before method set_table_for_first_display?
You can have a look at the whole code.Please let me know of a possible solution.Looking forward to an early reply.
Thanks.
TABLES: EKKO,
        EKPO,
        ZPS005.
INITIALIZATION.
PERFORM CREATE_FIELD_CATLOG.
                           Types Declaration                          *
*Structure for EKPO table
TYPES: BEGIN OF TYPE_EKPO,
          EBELN TYPE EKPO-EBELN, "PURCHSE ORDER NUMBER
          EBELP TYPE EKPO-EBELP, "Item Number of Purchasing Document
          POQTY TYPE EKPO-MENGE, "Purchase Order Quantity
          ERDAT TYPE SY-DATUM, "Date on Which Record Was Created
         LINEID TYPE ZPS005-LINEID, "Unique identification of document line
          EREQTY TYPE ZPS005-EREQTY, "Erection Quantity
     END OF TYPE_EKPO.
                                    Data                              *
           Data Declaration for Internal Table & Work Area            *
*INTERNAL TABLE FOR EKPO TABLE
DATA:LIT_EKPO TYPE TABLE OF EKPO,
       LS_EKPO TYPE EKPO.
*SECOND INTERNAL TABLE FOR EKPO TABLE
DATA: GIT_EKPO TYPE TABLE OF TYPE_EKPO.
DATA: GS_EKPO TYPE TYPE_EKPO.
*INTERNAL TABLE FOR FIELD CATALOG
DATA: LIT_FIELDCAT TYPE lvc_t_fcat,
        LS_FIELDCAT LIKE LINE OF LIT_FIELDCAT. "WORK AREA FOR FIELD CATALOG
*INTERNAL TABLE FOR Z TABLE ZPS005
DATA: LIT_ZPS005 TYPE TABLE OF ZPS005,
        LS_ZPS005 TYPE ZPS005.
                        ALV GRID Data Declaration                     *
DATA: V_CONTAINER TYPE REF TO cl_gui_custom_CONTAINER.
data: grid TYPE REF TO cl_gui_alv_grid.
data: ok_code type sy-ucomm.
DATA: V_LAYOUT TYPE lvc_s_layo. " FOR LAYOUT
DATA: V_LINE TYPE I,
        LINEID TYPE I.
DATA: V_INDEX TYPE SY-TABIX.
                               PARAMETER                              *
parameter : p_ebeln like ekko-ebeln.
                              START OF SELECTION                      *
START-OF-SELECTION.
                               SELECTION OF DATA                      *
CALL FUNCTION 'ME_PURCHASE_DOCUMENT_DATA_READ'
    EXPORTING
      I_EBELN                    = P_EBELN
      I_TCODE                    = 'ME23'
I_NO_COMMIT                = ' '
      I_TRTYP                    = 'A'
I_NO_MESSAGING             =
I_NO_MESSAGE_REQ           =
I_NO_AUTHORITY_CHECK       =
I_VORGA                    =
IMPORTING
E_EKKO                     =
   TABLES
     T_EKPO                     = LIT_EKPO
T_EKET                     =
T_EKKN                     =
T_KOMV                     =
   EXCEPTIONS
     NO_EBLNR                   = 1
     EBLNR_NOT_FOUND            = 2
     NO_TCODE                   = 3
     TCODE_NOT_ALLOWED          = 4
     NO_TRTYP                   = 5
     INVALID_CALL_OF_FB         = 6
     OTHERS                     = 7
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT LIT_EKPO INTO LS_EKPO.
    MOVE : LS_EKPO-EBELN TO GS_EKPO-EBELN,
           LS_EKPO-EBELP TO GS_EKPO-EBELP,
           LS_EKPO-MENGE TO GS_EKPO-POQTY.
    APPEND GS_EKPO TO GIT_EKPO.
ENDLOOP.
End-of-selection.
perform field_catalog.
call screen 100.
                               END-OF-SELECTION                       *
                            MODULES FOR ALV DISPLAY                   *
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF-STAT'.
SET TITLEBAR 'TITLE'.
ENDMODULE.                 " STATUS_0100 OUTPUT
**&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
   WHEN 'SWITCH'.
     PERFORM switch_edit_mode.
    WHEN 'SAVE'.
      PERFORM FILL_TABLE.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
**&      Module layout_0100 OUTPUT
      text
MODULE layout_0100 OUTPUT.
V_LAYOUT-grid_title = 'Purchase Order Erection Details'.
ENDMODULE.                 " layout_0100 OUTPUT
**&      Module data_retrivaL OUTPUT
      text
MODULE data_retrivaL OUTPUT.
IF V_CONTAINER IS INITIAL.
    CREATE OBJECT V_CONTAINER
      EXPORTING container_name = 'GRID'.
    CREATE OBJECT grid
    EXPORTING i_parent = V_CONTAINER.
ENDIF.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      IS_LAYOUT                     = V_LAYOUT
    CHANGING
      IT_OUTTAB                     = GIT_EKPO
      IT_FIELDCATALOG               = LIT_FIELDCAT
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      TOO_MANY_LINES                = 3
      others                        = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " data_retrivaL OUTPUT
*&      Module field_catalog OUTPUT
      text
FORM field_catalog.
CLEAR LS_fieldcat.
LS_fieldcat-fieldname = 'EBELN'.
LS_fieldcat-ref_table = 'GIT_EKPO'.
LS_FIELDCAT-coltext = 'PURCHSE ORDER NUMBER'.
LS_FIELDCAT-col_pos   = 0.
LS_FIELDCAT-EDIT = ' '.
ls_FIELDCAT-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT LS_FIELDCAT INTO TABLE LIT_FIELDCAT.
APPEND LS_fieldcat TO LIT_fieldcat.
CLEAR LS_fieldcat.
LS_fieldcat-fieldname = 'EBELP'.
LS_fieldcat-ref_table = 'GIT_EKPO'.
LS_FIELDCAT-coltext = 'ITEM NUMBER'.
LS_FIELDCAT-col_pos   = 1.
LS_FIELDCAT-EDIT = ' '.
ls_FIELDCAT-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT LS_FIELDCAT INTO TABLE LIT_FIELDCAT.
APPEND LS_fieldcat TO LIT_fieldcat.
CLEAR LS_fieldcat.
LS_fieldcat-fieldname = 'POQTY'.
LS_fieldcat-ref_table = 'GIT_EKPO'.
LS_FIELDCAT-coltext = 'PURCHASE ORDER QUANTITY'.
LS_FIELDCAT-col_pos   = 2.
LS_FIELDCAT-EDIT = ' '.
ls_FIELDCAT-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT LS_FIELDCAT INTO TABLE LIT_FIELDCAT.
APPEND LS_fieldcat TO LIT_fieldcat.
CLEAR LS_fieldcat.
LS_fieldcat-fieldname = 'ERDAT'.
LS_fieldcat-ref_table = 'GIT_EKPO'.
LS_FIELDCAT-coltext = 'DATE OF ERECTION'.
LS_FIELDCAT-col_pos   = 3.
LS_FIELDCAT-EDIT = 'X'.
ls_fieldcat-style = cl_gui_alv_grid=>mc_style_enabled.
INSERT LS_FIELDCAT INTO TABLE LIT_FIELDCAT.
APPEND LS_fieldcat TO LIT_fieldcat.
CLEAR LS_fieldcat.
LS_fieldcat-fieldname = 'EREQTY'.
LS_fieldcat-ref_table = 'GIT_EKPO'.
LS_FIELDCAT-coltext = 'ERECTION QUANTITY'.
LS_FIELDCAT-col_pos   = 4.
LS_FIELDCAT-EDIT = 'X'.
ls_fieldcat-style = cl_gui_alv_grid=>mc_style_enabled.
INSERT LS_FIELDCAT INTO TABLE LIT_FIELDCAT.
APPEND LS_fieldcat TO LIT_fieldcat.
ENDFORM.                 " field_catalog OUTPUT
*&      Form SWITCH_EDIT_MODE
      text
--> p1        text
<-- p2        text
*FORM switch_edit_mode.
IF GRID->is_ready_for_input( ) eq 0.
set edit enabled cells ready for input
   CALL METHOD GRID->set_ready_for_input
     EXPORTING
       i_ready_for_input = 1.
ELSE.
lock edit enabled cells against input
   CALL METHOD GRID->set_ready_for_input
     EXPORTING
       i_ready_for_input = 0.
ENDIF.
*ENDFORM.                               " SWITCH_EDIT_MODE
*&      Form FILL_TABLE
      text
--> p1        text
<-- p2        text
FORM FILL_TABLE .
LOOP AT GIT_EKPO INTO GS_EKPO.
    LS_ZPS005-EBELN = GS_EKPO-EBELN.
    LS_ZPS005-EBELP = GS_EKPO-EBELP.
    LS_ZPS005-POQTY = GS_EKPO-POQTY.
    LS_ZPS005-ERECDAT = GS_EKPO-ERDAT.
    LS_ZPS005-EREQTY = GS_EKPO-EREQTY.
ENDLOOP.
MODIFY ZPS005 FROM LS_ZPS005.
ENDFORM.                    " FILL_TABLE

Transfer data from Powerbook 180 to G3 or iMac.

I'm trying to transfer data from a Powerbook 180 to a G3 or an iMac. It appears the simplest way is to connect them with an ethernet cable. However, the Powerbook doesn't have an ethernet port, so I was trying to track down an adapter, and a Farallon Phone Net connector came up. I have one of those. Is there some way I can rig it up to connect the computers that doesn't require a phone line?
Thanks!

Hi,
There were adapters that could convert the MiniDIN-8 Printer Port output to Ethernet. There were also SCSI-to-Ethernet adapters. However, even if the hardware bit could be solved, you may run into difficulties with connection/sharing software (depending upon which computers and operating systems are involved).
Since the typical size of a file on a PowerBook 180 is small, it may be easier to use 1.44 MB floppy disks for transfers. An external USB floppy drive would be needed for a modern computer.
Jim has already indicated that there is a null-modem option. As mentioned, the communications part of ClarisWorks can be used on the PowerBook 180 (or a separate terminal emulation application, such as ZTerm). A modern Mac does not have serial MiniDIN-8 ports, so some kind of USB-to-serial adapter would be required (and a corresponding terminal emulation program).
If you by G3 mean one of the older models with serial MiniDIN-8 ports, you could connect the printer ports through a plain Mac serial printer cable, just as Jim suggested. With suitable operating systems, file sharing should be directly possible, without the use of any communications software (enable AppleTalk, enable file sharing, connect via AppleShare in the Chooser).
Jan

How to transfer data from FPM_POWL_UIBB to FPM_FORM_UIBB

Hi Team,
How to transfer data from one UIBB (component is FPM_POWL_UIBB) to another UIBB ( Componenet is FPM_FORM_UIBB).
I know the procedure how to transfer data from FPM_LIST_UIBB to FPM_FORM_UIBB using wiring concept, but from FPM_POWL_UIBB am unable to do that.
Appreciate your quick response.
Thanks in advance.
Thanks,
Satya.

Hi Bruce,
Thanks for quick response.
I will explain my requirement in detail.
IN FPM I have used 5 UIBB's ,
1) FPM_POWL_UIBB with Custom component and its configuration
2) FPM_FORM_UIBB which is a standard componet UIBB's their configurations and its feeder classes are as below,
             EAMS_WDC_ORD_LONGTEXT_CFG       CL_EAMS_UI_FD_ORD_LTXT
             EAMS_WDC_ORD_HEADER_CFG          CL_EAMS_UI_FD_ORD_HEADER
             EAMS_WDC_ORD_RESPONSIB_CFG     CL_EAMS_UI_FD_ORD_HEADER
In the above FPM application if I choose a record in FPM_POWL_UIBB it has to be appear in the respective standard UIBB's in edit mode so user can change according to his/her comfort and will save.
I have tried Singleton method also but not able to transfer data as I got confused which interface I shoul use in singleton class , as I was working with FPM_POWL_UIBB I may not use IF_FPM_GUIBB_FORM.
Please suggest me on this.
Thanks,
Satya.

Can a USB cable be used to transfer data from imac to macbook pro

can you transfer data from an IMAC to a macbook pro with retina display using a USB connnection, or is there another way to do it? My imac has USB and firewire bit macbook does not have firewire

Unless he is able to
work on the college computers (Apple) for projects
and homework on campus he will surely need something
to work on at home. He will be a commuter student.
Yes
Can anyone tell me if Apples are really superior to
PCs in graphics?
For video and graphical work, Macs are generally considered to be the industry standard and what you would work on in the graphics industry.
I also would like to know if Apples
are reliable--
I have used ten or more Macs in our office over the last five years and are still using them all today and all have worked fine.
how easy are they to install things
like additional RAM, etc--
Depends on the model some are easier than others, the PowerMac was very very easy, others are more complex.
how is Apples
support---
Applecare has a good reputation and most people recommend Applecare.
how does the Apple OS compare to Windows???
It is not so much a situation of which is better they are different.
Personally as someone who uses both on a daily basis more and more I prefer using OS X.
I do understand that Windows has a lot of
negatives--virus's --loopholes--etc.
Which is something which is less of an issue on the Mac.
Has anyone an idea if an Apple can be assembled at
home??
No
I would really like to save some money on an
Apple, if there is a way.
Buy a secondhand Mac, but for high-end graphical work you would need a decent Mac.
One thing that people often forget is how long Macs last.
I got my PowerMac in 2003 and it is still a really fast computer and I am expecting it to last another three years or more as my main computer.
iFelix

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

Transfer Data from a WAS for ABAP to the SLD

Similar Messages

Maybe you are looking for