Transfer data from FW drive to new imac

My previous imac died (logic board) and the HD from it is now in a firewire enclosure. Any tips on the best way to transfer data such as addresses, email etc.. to my new imac?

Hi Steve, Welcome back to Apple's Users Help Users Forums.
Mine was a '99 G4 which blew a CRT Capacitor, I think, and took the Video Card with it. I put the HD in an external FWHD case and followed Kappy. My main prob was finding an up to date Quicken File—took forever but finally found one. Reinstalled M$ Office and Quicken from their discs per Kappy.
I now keep a relatively current BU on an OWC FWHD using SuperDuper. Paid their $27.95 and make 'Smart BUs' which take ~6-7 mins for ~1 gig of 20 gig to update.
*Enjoy your new iMac*, JP

Similar Messages

  • How do i transfer data from old HP to new iMac?

    I want to buy an iMac from Apple online and the nearest Apple store in 3 hrs. away.  Is it hard to transfer data from my old computer to the new iMac?

    Not hard at all http://support.apple.com/kb/ht4796

  • Can I transfer data from my G4 to my IMac over a firewire without them syncing or messing either one up - do not want to modify either one...!

    Can I transfer data from my G4 to my IMac over a firewire without them syncing or messing either one up - do not want to modify either one...!

    Boot the G4 Mac into Target mode...
    http://support.apple.com/kb/HT1661
    That should make the G4 look like a big FW drive to the iMac.

  • What is the best way to transfer data from a PC to an iMac?

    What is the best way to transfer data from a PC to an iMac?

    If you know how to set up a computer-to-computer Ethernet network, then you can give that a try, but a hard drive will be faster than Ethernet unless you don't have a lot to transfer.
    Mac OS X 10.6 Help- Creating a computer-to-computer network

  • Transfer iTunes files from external drive onto new iMac

    I had all of my iTunes files on an external hard drive with an old eMac. I want to transfer the files to my brand-new iMac.
    It's easy to copy the iTunes Library folder from the external drive onto the iMac hard drive, and change the preferences so that new songs are stored onto the iMac, but it doesn't change the settings for iTunes. Then, if I "Add to Library" I get two copies of everything: the file that's on the external drive PLUS the file that's on the new iMac. If I delete all of the "old" duplicates, it will mess up my playlists.
    Isn't there an easy way to point iTunes to the new Library on the iMac and have it change the location setting for all of the songs?

    okay, let me rephrase my question:
    when you moved your files from the old Mac to the external, did you
    (a) drag the entire iTunes folder from <MacintoshHD>/users/<yourname>/music to the external
    or
    (b) use the +consolidate files+ command to move the files to the external
    if (a), connect the external to the new Mac and launch iTunes while pressing option on your keyboard. when prompted, click on +choose library+ and select the iTunes folder on the external.
    if (b), copy the iTunes folder from <MacintoshHD>/users/<yourname>/music on the old Mac to <MacintoshHD>/users/<yourname>/music on the new one, overwriting the iTunes folder in place there. connect the external to your new Mac and fire up iTunes normally.
    if you want to move the media files from the external to the internal disk of your new Mac, go iTunes > preferences > advanced and point +iTunes media folder location+ to the iTunes folder in <MacintoshHD>/users/<yourname>/music. also on the advanced tab, make sure there is a tick in the boxes next to +keep iTunes media folder organized+ and +copy files to ... when adding to library+.
    then file > library > organize library > consolidate files. this will copy all your media files to the location you specified earlier in the advanced tab. when done, you can (if you want) erase the external and use it for other purposes. or keep the files there and use the external as your backup.
    JGG

  • How do I transfer my Quicken 2004 data from old MacBook to new Imac with Mountain Lion

    I want to transfer my Quicken 2004 (upgraded to 2006) data from MacBook running OSX 10.5.8 to new Imac running Mountain Lion with Quicken 2007 Lion.  How do I do this?  I thought from what I've read on line that all I needed to do was upgrade the quicken to 2006 and then the data would be readable by Quicken 2007 Lion.  Any help would be greatly appreciated!

    OK: This information is VERY helpful!  Note my comments below:
    elcamera wrote:
    Here is what I'm doing step by step:
    Open Quicken 2006 (it did automatically convert the Quicken 2004 data) -- GOOD!
    Do not do these steps
    I went to File> Export> All 
    Named the file "Copy of Quicken Data.qif" and saved it to the desktop of my MacBook.
    At this point if I send the file as is it would not open on the other end saying that Power PC apps are not supported. 
    I discovered that if I  go to File> Get Info in the Finder window before I send it and change the setting "Open with" from "Preview" to "Quicken 2006", that the file would be recognized by the new computer.
    Compress the converted Quicken 2006 data file by Control-Clicking on the converted Quicken 2006 data file and it should save with a .zip extension.
    Send the automatically converted and compressed Quicken 2006 data file with the zip extension I send it to myself via email as an attachment, I save the attachment to the desktop of the Imac.  Uncompress it by double-clicking it.
    I open Quicken 2007 Lion
    Go to File>Open File... Import>From QIF
    Select the converted and uncompressed Quicken 2006 data file attachment that you saved to the desktop of the iMac and then uncompressed. "Copy of Quicken Data.qif"
    It begins to download, then I get a warning
    "Quicken is unable to import "Copy of Quicken Data.qif" becasue the transaction displayed below is too large...  it goes on to say that there is possibly too much text in the split line detail etc.
    It should open in Quicken 2007 for Lion/Mt. Lion
    Thanks for your time, any insights would be much appreciated.

  • I have a power mac and the hard drive is about to die, i have a new hard drive to install, i know how to remove and put the old in the second space and load the new one, then what...when do reinstall the OS and transfer data from old drive

    I have a power mac, the hard drive is struggling, I have a new hard drive ready to install, after I pull the old one and put the new one it's place and place the old one in the next slot ready to transfer data....how do I start this next step.  Do I down load OS, and go to utililities...please just a step by step after hard drives in position.

    Hi Susan, you must have a Mac Pro, Powermacs cannot run 10.6.x
    Anyway, once you Install the new drive, you likely must Format it...
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://web.me.com/pondini/AppleTips/DU.html
    Then Install the OS & on first boot of the new install, after a step or two, avail yourself of Migration Assistant & Migrate everything.

  • Transfer files from 8600/200 to new Imac 20/SD

    Hi,
    I know how to turn the computer on- aside from that I am a complete novice- so I request your patience.
    My question is how to transfer my documents from my old computer (PowerMac 8600/200-Operating system 8.1) to the new Imac 20/SD 2.4 GHz IntelCore 2 that is due to arrive any day now. I also have documents on Zip discs that I need to transfer.
    I just switched to cable from a dial up connection- so now the 8600 does not have an Internet connection. I have borrowed, and am currently using my mom’s eMac Power PC G4 that has a USB Hub in the extended keyboard.
    The 8600 has slots for disc, Zip and CD. The new computer I believe only has a CD slot.
    Can I connect a Zip drive to the new Imac 20/SD to copy Zip data onto the new computer? Would I need a different type of Zip drive to connect to the old 8600/200? This is probably a dumb question but would my mom’s eMac keyboard with a USB slot work on the 8600 so I could transfer files in some way using the USB slot?
    Also, - as secondary question how can I best use my faithful 8600- and not have to totally retire it.
    I would appreciate any help/info you can share on this topic.
    Thanks
    Ellen-

    Ellen,
    You can find used zip drives for cheap at surplus stores and recyclers. Zip disks are great for transferring data and moving a file to a computer with a color printer, etc. Do not use them for storing data.
    You will need one that is SCSI and one that is USB. They can be found for $5 apiece. Be sure and get a non dead on arrival (DOA) guarantee because the prior owner may have experienced the click of death and loss of data on an older drive.
    Google 'click of death' and 'zip drive' and you will have plenty of horror stories to read. Out of 50 zip drives, I keep the good ones marked and separate from the older disasters - usually a dark blue case. The drives have plenty of great uses and $5 is much better than the $250 I was happy to pay when our first one was new. Do not let the click issue discourage you from trying them, just be forewarned.
    Here is a 1998 news article:
    http://www.news.com/Clickof+death+strikesIomega/2100-1001_3-207628.html
    Drives from that era are still around even though the problem has long since been cured. Iomega learned about quality control the hard way.
    More reading for solutions:
    http://www.grc.com/tip/codfaq1.htm
    Even Wikipedia has it documented:
    http://en.wikipedia.org/wiki/Clickofdeath
    With that said, if you can find a store with $5 zip drives and a good return policy, go for it.
    Ji˜m

  • Difficulties transferring data from old PC to new iMac

    I'm currently helping my neighbors set up their new iMac, 27". They own an old PC that a friend built, and it runs Windows XP. The iMac came yesterday, and I was helping them get started with it this afternoon. In order to transfer data like their iTunes library, photos, etc., I took over an Iomega external HD to use. However, the PC wouldn't detect it. I used the USB cord supplied with the drive, in several different ports on the PC. The ports do work, as an iPhone I plugged into them was detected. I then tried the supplied FireWire cable, no dice there either. No recognition on the PC whatsoever.
    So I went back to my house and got my other hard drive, a LaCie Starck. Plugged it in to their PC, no recognition. I formatted both drives as MS-DOS (FAT) with Disk Utility, and that did nothing.
    So I went to burning DVD's. I popped one in, and proceeded to use iTunes' backup library function to burn their library to the DVD. I inserted the blank disk, and then iTunes showed that it was 'Checking media" up in the top of the application for 60 seconds or so, and then the Apple logo replaced that and nothing else happened.
    I'm out of ideas here. What do I do to get this information over to the iMac? Why are my drives not being recognized? I'm quite confused.

    I may be able to help re. the iTunes transfer; unfortunately, I was not able to copy the article because it is a pop up, but if you will go to the Finder Help menu (on the new Mac) and type in "transfer", one of the help articles will be instructions on how to transfer iTunes music from a PC to a Mac.
    And, here is a general article which may be helpful:
    http://support.apple.com/kb/HT2518

  • Transfer files from External Harddrive to new iMac

    Had old powerbook, saved all data onto External Harddrive. Purchased new iMac and need to transfer Address Book and iCal information from ex. harddrive to iMac. I can't seem to figure it out. Can anyone help?

    Well, I would skip the Firewire since it isn't essential. Connect the backup drive to your new Retina when it arrives, but before you turn it on for the first time. When you then turn it on you will begin in the Setup Assistant where you will have an opportunity to restore your files from a backup drive or another computer. Select the appropriate option. You can then restore (migrate) your Home folder, third-party applications and support files, and system preferences. Once that is completed when the computer restarts you will be all set up in your old Home folder.
    Note that you will be transferring files over a USB connection. Depending upon how much data you are transferring this may take a very long time, so be patient. A USB drive's typical transfer rate is about 12 GBs/hour.

  • How to get data from hard drive in dead iMac?

    I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

    Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
    Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

  • How can you transfer photos from iPod Nano to new iMac?

    My friend has an ipod nano. Here's a photo, not sure what gen. it is.
    He had a PC that no longer works and has no data left on it. His original iPod Photos were stored on that PC that no longer works.
    He has since purchased an iMac and is running Lion OS X, all up to date.
    The problem: He NO LONGER has the ORIGINAL PHOTOS, only the ones on his iPod Nano, that used to work with his PC, which no longer functions.
    He would like to copy the photos stored on his iPod Nano, to his new iMac.
    Using finder, he went to Device, then clicked PHOTOS and dragged the folder to his desktop. It said there was 1.43 GB of content.
    However, all that was saved to the desktop was (see other photo) Photo Cache, Photo Database and Thumbs. There are no photos at all. What is he doing wrong? Thanks.

    There are a number programs out there for recovering photos from an iPod, have a look at the ones below. If you search the internet you can find more. Just be aware that what you'll be recovering will be photos optimised for the iPod so they won't be the same quality as the original full resolution versions:
    iPodPhotoCopy Windows only
    CopyPodPhoto Windows only
    Tansee iPod Transfer Photo Windows only
    iPod Photo Liberator Mac & Windows
    TouchCopy Mac and Windows Versions (iPhone and iPod Touch compatible)
    If you have full resolution copies of the photos on the iPod have a look here: Apple Knowledge Base article - Use Disk Mode to copy photos from iPod

  • Transfer music from old iPod to new iMac

    Have a 30G iPod that was synced with old computer that crashed. Bought new iMac and want to transfer music from iPod to new iMac. Tech Support not able to help. Any LEGAL ideas?

    With a nod to veteran poster Zevoneer...here's what you should know.
    The transfer of content is designed by default to be one way from iTunes to iPod, but there are third-party utilities that you can use to retrieve music files and playlists from your iPod. Some will transfer movies, videos, photos and games as well. Check out the web pages for more info. This is just a sample of what's available.
    iRepo Mac and Windows
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    Senuti Mac
    There is also a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows or a Mac. That process is detailed here: http://support.apple.com/kb/HT1329?viewlocale=en_US

  • How do I transfer data from 3S iPhone to new 4S iPhone?

    Have ATT and an iPhone 3s.  Am buying a 4s from Apple.  Want to transfer all data from the 3s to the 4s.  3s is backed up to my iCloud.  How do I do this?
    Thanks

    When u activate your 4s, don`t choose "activate as a new iphone". Choose to activate from icloud.

  • How to transfer information from hard drive to new mac

    how to transfer information from external hard drive to new macbookpro

    Have a read here Setting-up a new Mac from an old one, its backups, or a PC
    Stefan

Maybe you are looking for