Transfer data from Powerbook 180 to G3 or iMac.

I'm trying to transfer data from a Powerbook 180 to a G3 or an iMac. It appears the simplest way is to connect them with an ethernet cable.  However, the Powerbook doesn't have an ethernet port, so I was trying to track down an adapter, and a Farallon Phone Net connector came up.  I have one of those.  Is there some way I can rig it up to connect the computers that doesn't require a phone line?
Thanks!

Hi,
There were adapters that could convert the MiniDIN-8 Printer Port output to Ethernet. There were also SCSI-to-Ethernet adapters. However, even if the hardware bit could be solved, you may run into difficulties with connection/sharing software (depending upon which computers and operating systems are involved).
Since the typical size of a file on a PowerBook 180 is small, it may be easier to use 1.44 MB floppy disks for transfers. An external USB floppy drive would be needed for a modern computer.
Jim has already indicated that there is a null-modem option. As mentioned, the communications part of ClarisWorks can be used on the PowerBook 180 (or a separate terminal emulation application, such as ZTerm). A modern Mac does not have serial MiniDIN-8 ports, so some kind of USB-to-serial adapter would be required (and a corresponding terminal emulation program).
If you by G3 mean one of the older models with serial MiniDIN-8 ports, you could connect the printer ports through a plain Mac serial printer cable, just as Jim suggested. With suitable operating systems, file sharing should be directly possible, without the use of any communications software (enable AppleTalk, enable file sharing, connect via AppleShare in the Chooser).
Jan

Similar Messages

  • How can transfer data from my old computer to my iMac

    How can transfer data from my old computer to my iMac

    Depends. what two computer modelss do you have? Do they both have Firewire ports and/or Thunderbolt ports? Do you have a home network with a router that has Ethernet ports available for each computer? Do you have an external hard drive available that could be used to transfer data?

  • Transfer data from old macbook Pro to new iMac

    how can I transfer all of my data from my old macbook pro to my new iMac using firewire

    See How do I set up a new Mac from an old one, its backups, or a PC?

  • Transfer data from Powermac G4 to new 27" iMac

    I have a 2003 PowerMac G4 that I am replacing with a new 27" iMac 3.4 i7 which is on order. I want to transfer my photos and iTunes files to the new machine. I had purchased a LaCie d2 USB3/Thunderbolt harddrive in hopes of backing up the G4 but it is "not supported by this architecture". The G4 was updated to USB 2. The LaCie is USB3/USB2 compatible.
    Can I use Migration Assisant going form a pre-Intel computer to an Intel based computer? Is there a Firewire 800 to Thunderbolt or USB 3 cable? There is about 200 GB that I need to transfer.
    Any suggestions?
    Hardware Overview:
      Model Name:          Power Mac G4
      Model Identifier:          PowerMac3,6
      Processor Name:          PowerPC G4  (3.3)
      Processor Speed:          1 GHz
      Number Of CPUs:          1
      L2 Cache (per CPU):          256 KB
      L3 Cache (per CPU):          1 MB
      Memory:          2 GB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.5.7f1
      Serial Number (system):          XB31102SN1S
      Hardware UUID:          00000000-0000-1000-8000-000393CACB46
    FireWire Bus:
      Maximum Speed:          Up to 800 Mb/sec
    System Software Overview:
      System Version:          Mac OS X 10.5.8 (9L31a)
      Kernel Version:          Darwin 9.8.0
      Boot Volume:          Macintosh HD
      Boot Mode:          Normal

    Please pardon the intrusion…
    Congratulations on making Level 6, Eric. We've already started the celebration in The Lounge without you, but it would be ever so much nicer if you would join in.
    Hope to see you there soon. 

  • Trapped at transferring data from my old macbook pro to iMac

    I got a new iMac yesterday and was trying to transfer data from my old macbook pro to iMac through time machine...
    However, I encountered HUGE problems....
    Background info: I set up a new account before I transffered my data.
    Here is what I did:
    I used migration assistance to transfer data. I chose to transfer everything listed on migration assistance from time machine to my new iMac.
    After this process was completed, I switched to the transferred account from my newly-set account. Then I realized all the old stuf, (including the software problems + old apps such as microsoft 2008, had been transferred to my new iMac. what I really wanted were all the documents, pictures and music! Therefore I decided to delete this account....
    Question 1:
    1) I deleted the transferred account, then there was a windown came up asking me if i wanted to keep the home folder, I chose no. then mac started cleaning up and BACKING UP. Since I already had a copy of everything, I stopped the backup process....then this transferred account was deleted. However, everything was still on my mac that I don't have access to (at least I don't know how...) when I checked my mac stroage!
       Could anyone tell me how to delete all the files I transferred from time machine to my new iMac?
    Question 2:
    2) how can i only transfer documents+pictures+music from my old macbook pro to new iMac through time machine without creating a new account? I want all the files to be directly transferred to my newly-set account...
    LSS:
    Question 1
    I tried to transfer everthing from my old macbook pro to new iMac but i realized there were something I didn't want that had been transferred as well. Therefore I deleted this transferred account. However, all the files are still in my mac even if I have deleted that account. Could anyone tell me how I can access to those content and delete them?
    Question 2
    I just want the documents, music and pictures (from iPhone library) to be directly transferred to the newly-set account on my iMac through time machine (instead to transferred the whole old account to my imac) How can I do it??
    THANK YOU FOR YOUR PATIENCE OF GOING THROUGH THIS MESSAGE. I WOULD REALLY APPRECIATE IF YOU COULD GIVE ME A HAND.
    btw, you can totally see that i'm not a computer person at all....:( thanks for your help!!

    I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'

  • How do i transfer data from one internal tabe to another.

    Hi All,
             How do i transfer data from one internal tabe to another.
             Can i do it ebven if he tables are different in structure.
    Please Advice.
    Thanks in advance.

    Hi Saket Tiwari,
    I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
    explanation of how you can populate an internal table.
    1) Append data line by line.
         Syntax :  APPEND [<wa> TO / INITIAL LINE TO] <itab>.
    this appends new line to internal table <itab>.
    2) Using COLLECT statement.
                 COLLECT is another form of statement used for populating the internal tables.  Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
         Syntax : COLLECT [<wa> INTO] <itab>.
    3) Using INSERT statement
         Syntax  INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
    INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
    Now coming to your request..
    To append part or all of an internal table
         Syntax
                  APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
    *     Note:
    Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
    b) To insert part or all of an internal table into another internal table
         Syntax
              INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
              INTO <itab2> [INDEX <idx>].
    c) Using Move statement.
    To copy entire contents of one table into another in one execution
         Syntax MOVE  <itab1> To <itab2>.
                   OR
              <itab1> = <itab2>.
    but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
    These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line  the syntax becomes,
    ITAB1[] = ITAB2[].
    Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
    for this we use    
                                MOVE-CORRESPONDING <itab1> TO <itab2>
        this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
            sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
    I hope the information provided has been of your help.
    Reward if useful.
    Regards,
    Jose

  • How do I transfer data from one exterior harddrive to another?

    How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

    Depends what you want to transfer...
    A few more Details about what you are trying to achieve would be good.

  • Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working

    Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working.

    Merging of Apple ID accounts is not possible.

  • Transfer data from one database to another without identities but keep the relation b/w PK and Foreign key

    Hi,
    I need to transfer data from one database to another database (both are identical databases). 
    1. Not transferring identity columns (primary keys). the destination table might have the same key.
    2. keep the PK's and FK's relation b/w parent and child table
    3. I have 4 levels 
    Example: tableA (col1 int identity(1,1) , col2, col3)
    tableB (col1 int identity(1,1) ,
    col2 , col3) -- col2 has the foreign key relation with tableA.col1
    tableC (col1 int identity(1,1) ,
    col2, col3) -- col2  has the foreign key relation with tableB.col1
    tableD (col1 int identity(1,1) , col2, col3) -- col2  has the foreign key relation with tableC.col1
    please advise me.
    Thanks in advance

    Try the below:
    /********************************SAMPLE TARGET***************************************************************/
    Use MSDNSamples
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'R1'
    Insert into TableA(name) Select 'R2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Childname1',1
    /********************************SAMPLE TARGET***************************************************************/
    /********************************SAMPLE SOURCE***************************************************************/
    Use Sample
    create table TableA(LevelValueId int identity(1,1) primary key, name varchar(100))
    Insert into TableA(name) Select 'C1'
    Insert into TableA(name) Select 'C2'
    create Table TableB(ChildId int identity(100,1),name varchar(100), LevelValueID int references TableA(LevelValueId))
    Insert into TableB(name,LevelValueID) Select 'Kidname1',1
    /********************************SAMPLE SOURCE***************************************************************/
    USe MSDNSamples
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    --Migration table
    Create table Mg_TableA(LevelValueId int, NewValueId int)
    /********************************MIGRATION INTERMEDIATE TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    MERGE INTO TableA
    USING sample.dbo.TableA AS tv
    ON 1 = 0
    WHEN NOT MATCHED THEN
    INSERT(name) Values(tv.name)
    Output tv.levelValueId ,inserted.LevelValueid INTO
    Mg_TableA;
    /********************************ACTUAL MIGRATION FOR MASTER TABLE***************************************************************/
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    Insert into TableB (name,LevelValueID)
    Select A.name,B.NewValueId From sample.dbo.TableB A
    Inner join Mg_TableA B on A.LevelValueID = B.LevelValueId
    /********************************ACTUAL MIGRATION FOR CHILD TABLE***************************************************************/
    /********************************TEST THE VALUES***************************************************************/
    Select * From TableA
    Select * From Mg_TableA
    Select * From TableB
    /********************************TEST THE VALUES***************************************************************/
    Drop table TableB,Tablea,Mg_TableA
    Use Sample
    Drop Table TableB,Tablea

  • How to transfer data from legacy system  to SAP

    Hi Friends,
    I would like to know the process and the steps followed to transfer data from my legacy system to SAP.
    Suppose if i have all the data in the form of Excel sheet or doc type. How can i transfer this data into SAP.
    Please explain the steps followed.
    Appreciate your help
    Anil

    Hi ,
    Conversion of legacy data into SAP can be uploaded using a standard SAP Tool called LSMW ( TCode:LSMW).
    the below link gives a brief explanation of the LSMW tool
    http://tutorialsap.com/abap/sap-lsmw-tutorial-with-steps-to-create.html
    There are various methods to upload data within LSMW. If the number of records are very high like Article Master or  Conditions for Retail the IDOC method must be used.
    Standard IDocs
    1. Article Master - ARTMAS
    2. Conditions - COND_A
    3. Source list - SRCLST
    4. Customer Master or WRF3/WRF6 tables - DEBMAS
    5. Vendor master- CREMAS
    Etc. Use transaction code WE60 to see the structure of each of the idocs. New enhancements can be done for the idocs if the required field is not available.
    Regards
    Prabhu

  • How can you transfer data from one ipod to another ?

    How can you transfer data from one ipod to another ipod ?

    The geniusbar told me what to do, I understood but there is still a problem for me >:/ It's not showing up though. Like "device."  Nothing is happening, and I tried as soon as I got home. Then after half an hour, then an hour, then 3 hours. My problem is that it's not showing up! It's stuck in recovery mode! There's still like 25% battery. So I have no idea why.

  • How do I transfer data from one iPhone to another?

    How do I transfer data from one iPhone to another?

    If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
    Here's how...
    Connect your old Apple device to WiFi and to a power source.
    Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
    iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
    Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
    When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
    Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
    When the restore process is complete, your iPhone will restart and be ready to use.
    Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

  • Can i transfer data from one icloud itunes account to another

    my son has used my i cloud to back up his school work and would like to transfer it to his i cloud account so he can use it on his other devices , computer etc
    is this possible?
    I have very little on the i cloud account but do use it for photos etc

    You cannot transfer data from one account to another.

  • How to transfer data from one phone to another

    my daughter got a new phone.  she is trying to transfer data from her old phone.  she cant remember her icloud password.  we can't have them email because the email uses the same password.  If i delete the account all the information we are trying to transfer will be lost.  Any idea how to retrieve the password?

    You transfer data to a new phone by backing up the old one, then restoring the backup to the new one (see http://support.apple.com/kb/ht2109).
    Also, deleting the account only deletes it from the phone, not from iCloud.  But if you're running iOS 7 with Find My iPhone turned on you'll need the password in order to delte the account.
    If you need to reset the password, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • Transfer data from one server to another server using idocs

    hi,crm
       i have a data in crm system, i want to download this data and upload into another crm system by using idocs.
      please any one explain.

    Hi Ravi,
          my senario is i have to transfer  data from  crm 5.0 to 7.0.
          i have marketing attributes
        t-code: bp----> marketing attributes
       i want to transfer marketing attributes from A to B.
           i created one structure for marketing attributes around 160. and i added this structure fields into custom segments.
          i created custom idoc type and i added segments into idoc.
        i created one function module for getting data from structure and passing to segments and idoctype.
       check the code below.
    FUNCTION ZCRMXIF_MKT_DATA.
    *"*"Local Interface:
    *"  IMPORTING
    *"     REFERENCE(EV_MKT_ATTR) TYPE  ZCRMXIF_MKT_STR
    Data : c_segment type ZE101CRMXIF_MKT_ATTR_DATA,
           c_segment1 type ZE101CRMXIF_MKT_ATTR_DATA1,
           c_segment2  type ZE101CRMXIF_MKT_ATTR_DATA2,
           c_segment3 type  ZE101CRMXIF_MKT_ATTR_DATA3,
           c_segment4 type  ZE101CRMXIF_MKT_ATTR_DATA4.
    data:  c_messagetype type c value'zcrmxif_partner_save',
           c_idoc_type type c value'zcrmxif_partner_save_mkt',
           idoc_control like edidc,
           t_comm_control like edidc occurs 0 with header line,
           idoc_data like edidd occurs 0 with header line.
    data: lt_mkt_attr type Zcrmxif_mkt_str occurs 0 with header line,
           ls_mkt_attr like zcrmxif_mkt_str.
    loop at lt_mkt_attr.
                c_segment-PARTNER = lt_mkt_attr-partner.
                c_segment-PARTNER_GUID = lt_mkt_attr-partner_guid.
                  idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA' .
                  idoc_data-sdata = c_segment.
                 append idoc_data.
               c_segment1-ADHAR_NUM = lt_mkt_attr-ADHAR_NUM.
               c_segment1-ADULTS = lt_mkt_attr-ADULTS.
               c_segment1-AGEGROUP = lt_mkt_attr-AGEGROUP.
               c_segment1-AG_CODE = lt_mkt_attr-AG_CODE.
               c_segment1-AMERICANEXPRESS = lt_mkt_attr-AMERICANEXPRESS.
               c_segment1-ANNUALINCOME = lt_mkt_attr-ANNUALINCOME.
               c_segment1-AUTO_TYPE_1 = lt_mkt_attr-AUTO_TYPE_1.
               c_segment1-AUTO_TYPE_2 = lt_mkt_attr-AUTO_TYPE_2.
               c_segment1-AUTO_TYPE_3 = lt_mkt_attr-AUTO_TYPE_3.
               c_segment1-A_HOMEDEL = lt_mkt_attr-A_HOMEDEL.
               c_segment1-BANKNAME = lt_mkt_attr-BANKNAME.
               c_segment1-BLOODPRESSURE = lt_mkt_attr-BLOODPRESSURE.
               c_segment1-BPRELATION = lt_mkt_attr-BPRELATION.
               c_segment1-BRAND = lt_mkt_attr-BRAND.
               c_segment1-CC1001 = lt_mkt_attr-CC1001.
               c_segment1-CC1002 = lt_mkt_attr-CC1002.
               c_segment1-CCCLASSIC = lt_mkt_attr-CCCLASSIC.
               c_segment1-CCGOLD = lt_mkt_attr-CCGOLD.
               c_segment1-CCOTHERS = lt_mkt_attr-CCOTHERS.
               c_segment1-CCPLAT = lt_mkt_attr-CCPLAT.
               c_segment1-CCREDIT = lt_mkt_attr-CCREDIT.
               c_segment1-ccsilver = lt_mkt_attr-ccsilver.
               c_segment1-CCTITA = lt_mkt_attr-CCTITA.
               c_segment1-CDEBIT = lt_mkt_attr-CDEBIT.
               c_segment1-CHILDREN = lt_mkt_attr-CHILDREN.
               c_segment1-CITIBANK = lt_mkt_attr-CITIBANK.
               c_segment1-CNAPP = lt_mkt_attr-CNAPP.
               c_segment1-CNC_PRINT = lt_mkt_attr-CNC_PRINT.
               c_segment1-CNC_SIZE = lt_mkt_attr-CNC_SIZE.
               c_segment1-CNC_SIZE_NEW = lt_mkt_attr-CNC_SIZE_NEW.
               c_segment1-CNC_STATUS = lt_mkt_attr-CNC_STATUS.
               c_segment1-CNC_TIME_ZONE = lt_mkt_attr-CNC_TIME_ZONE.
               c_segment1-CNC_TIME_ZONE_NEW = lt_mkt_attr-CNC_TIME_ZONE_NEW.
               c_segment1-CONDFIRSTZ = lt_mkt_attr-CONDFIRSTZ.
               c_segment1-COMPANY = lt_mkt_attr-COMPANY.
               c_segment1-CONDSECOND = lt_mkt_attr-CONDSECOND.
               c_segment1-CONDTHIRD = lt_mkt_attr-CONDTHIRD.
               c_segment1-CUSTOMERTYPE = lt_mkt_attr-CUSTOMERTYPE.
               c_segment1-CUST_BUSINESS_NAME = lt_mkt_attr-CUST_BUSINESS_NAME.
               c_segment1-DECL_DATE = lt_mkt_attr-DECL_DATE.
               c_segment1-DED = lt_mkt_attr-DED.
               c_segment1-DIST = lt_mkt_attr-DIST.
               c_segment1-DNC = lt_mkt_attr-DNC.
               c_segment1-DNCEMAIL = lt_mkt_attr-DNCEMAIL.
               c_segment1-DNCPHONE = lt_mkt_attr-DNCPHONE.
               c_segment1-DNCPOST = lt_mkt_attr-DNCPOST.
               c_segment1-DOB_FAM_2 = lt_mkt_attr-DOB_FAM_2.
               c_segment1-DOB_FAM_3 = lt_mkt_attr-DOB_FAM_3.
               c_segment1-DOB_FAM_4 = lt_mkt_attr-DOB_FAM_4.
               c_segment1-PLANG = lt_mkt_attr-PLANG.
    *           c_segment1-APPL_SNAME = lt_mkt_attr-APPL_SNAME.
                 idoc_data-segnam =  'ZE101CRMXIF_MKT_ATTR_DATA1'.
                idoc_data-sdata = c_segment4.
                 append idoc_data.
                c_segment2-DTPCARDGIVCOU = lt_mkt_attr-DTPCARDGIVCOU.
                c_segment2-DTPCARDOFF = lt_mkt_attr-DTPCARDOFF.
                c_segment2-DTPCARDOTHSTORE = lt_mkt_attr-DTPCARDOTHSTORE.
                c_segment2-DTPCARDRETCOU = lt_mkt_attr-DTPCARDRETCOU.
                c_segment2-DTPCARDSHREDDED = lt_mkt_attr-DTPCARDSHREDDED.
                c_segment2-DTWELCOMCALL = lt_mkt_attr-DTWELCOMCALL.
                c_segment2-DUDZ = lt_mkt_attr-DUDZ.
                c_segment2-EDUDR = lt_mkt_attr-EDUDR.
                c_segment2-DTPCARDSTORE = lt_mkt_attr-DTPCARDSTORE.
                c_segment2-EDUER = lt_mkt_attr-EDUER.
                c_segment2-EDUG = lt_mkt_attr-EDUG.
                c_segment2-EDUHS = lt_mkt_attr-EDUHS.
                c_segment2-EDULAW = lt_mkt_attr-EDULAW.
                c_segment2-FOURWHEELER = lt_mkt_attr-FOURWHEELER.
                c_segment2-FULL_NAME = lt_mkt_attr-FULL_NAME.
                c_segment2-FWLT15KCC = lt_mkt_attr-FWLT15KCC.
                c_segment2-FAMILY_MEMBER_NAME = lt_mkt_attr-FAMILY_MEMBER_NAME.
                c_segment2-FAMILYMEMBERS = lt_mkt_attr-FAMILYMEMBERS.
                c_segment2-FAMILY_MEMBER_NAME_2 = lt_mkt_attr-FAMILY_MEMBER_NAME_2.
                c_segment2-FAMILY_MEMBER_NAME_3 = lt_mkt_attr-FAMILY_MEMBER_NAME_3.
                c_segment2-FAMILY_MEMBER_NAME_4 = lt_mkt_attr-FAMILY_MEMBER_NAME_4.
                c_segment2-FAMILY_MEMBER_NAME_5 = lt_mkt_attr-FAMILY_MEMBER_NAME_5.
                c_segment2-FWLT1KCC = lt_mkt_attr-FWLT1KCC.
                c_segment2-FWLT2KCC = lt_mkt_attr-FWLT2KCC.
                c_segment2-GEO_WING_LAT = lt_mkt_attr-GEO_WING_LAT.
                c_segment2-GEO_WING_LONG = lt_mkt_attr-GEO_WING_LONG.
                c_segment2-HDFCBANK = lt_mkt_attr-HDFCBANK.
                c_segment2-HSBC = lt_mkt_attr-HSBC.
                c_segment2-ICICIBANK = lt_mkt_attr-ICICIBANK.
                c_segment2-INCMTO = lt_mkt_attr-INCMTO.
                c_segment2-INCT2F = lt_mkt_attr-INCT2F.
                c_segment2-INCT2T = lt_mkt_attr-INCT2T.
                c_segment2-IND_SECTOR = lt_mkt_attr-IND_SECTOR.
                c_segment2-INTERNETCHATTING = lt_mkt_attr-INTERNETCHATTING.
                c_segment2-LICENSE_INFO = lt_mkt_attr-LICENSE_INFO.
                c_segment2-INTERNET_CONNECT = lt_mkt_attr-INTERNET_CONNECT.
                c_segment2-MFAM_INCOME = lt_mkt_attr-MFAM_INCOME.
                c_segment2-MODEL_1 = lt_mkt_attr-MODEL_1.
                c_segment2-MODEL_2 = lt_mkt_attr-MODEL_2.
                c_segment2-MODEL_3 = lt_mkt_attr-MODEL_3.
                c_segment2-MOTHERS_NAME = lt_mkt_attr-MOTHERS_NAME.
                c_segment2-MO_OF_P = lt_mkt_attr-MO_OF_P.
                c_segment2-MO_OF_P2 = lt_mkt_attr-MO_OF_P2.
                c_segment2-MO_OF_P3 = lt_mkt_attr-MO_OF_P3.
                c_segment2-MY_OF_P3 = lt_mkt_attr-MY_OF_P3.
                c_segment2-NOMINEES_NAME = lt_mkt_attr-NOMINEES_NAME.
                c_segment2-NONE = lt_mkt_attr-NONE.
                c_segment2-OCCU_OD_OTHR = lt_mkt_attr-OCCU_OD_OTHR.
                c_segment2-OCC_FAM_1 = lt_mkt_attr-OCC_FAM_1.
                c_segment2-OCC_FAM_2 = lt_mkt_attr-OCC_FAM_2.
                c_segment2-OCC_FAM_3 = lt_mkt_attr-OCC_FAM_3.
                c_segment2-OCC_FAM_4 = lt_mkt_attr-OCC_FAM_4.
                c_segment2-OCC_FAM_5 = lt_mkt_attr-OCC_FAM_5.
                c_segment2-OCC_NOM = lt_mkt_attr-OCC_NOM.
               idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA2'.
               idoc_data-sdata = c_segment4.
               append idoc_data.
               C_segment3-PLANG_OTHR = lt_mkt_attr-PLANG_OTHR.
               C_segment3-REF_MAILADD = lt_mkt_attr-REF_MAILADD.
               C_segment3-RELATION_FAM_1 = lt_mkt_attr-RELATION_FAM_1.
               C_segment3-RELATION_FAM_2 = lt_mkt_attr-RELATION_FAM_2.
               C_segment3-RELATION_FAM_3 = lt_mkt_attr-RELATION_FAM_3.
               C_segment3-RELATION_FAM_4 = lt_mkt_attr-RELATION_FAM_4.
               C_segment3-RELATION_FAM_5 = lt_mkt_attr-RELATION_FAM_5.
               C_segment3-REL_ACTIVE_STAT = lt_mkt_attr-REL_ACTIVE_STAT.
               C_segment3-REL_KISAN_MITRA_STAT = lt_mkt_attr-REL_KISAN_MITRA_STAT.
               C_segment3-REL_NOM = lt_mkt_attr-REL_NOM.
               C_segment3-REL_PLASTIC_CARD_STAT = lt_mkt_attr-REL_PLASTIC_CARD_STAT.
               C_segment3-REL_STAFF_STAT = lt_mkt_attr-REL_STAFF_STAT.
               C_segment3-REMARKS = lt_mkt_attr-REMARKS.
               C_segment3-ROCN = lt_mkt_attr-ROCN.
               C_segment3-ROCN_FAM_1 = lt_mkt_attr-ROCN_FAM_1.
               C_segment3-ROCN_FAM_2 = lt_mkt_attr-ROCN_FAM_2.
               C_segment3-ROCN_FAM_3 = lt_mkt_attr-ROCN_FAM_3.
               C_segment3-ROCN_FAM_4 = lt_mkt_attr-ROCN_FAM_4.
               C_segment3-ROOMS_PER_FLAT = lt_mkt_attr-ROOMS_PER_FLAT.
               C_segment3-SCH_NUM = lt_mkt_attr-SCH_NUM .
               C_segment3-SECONDARYEMAIL = lt_mkt_attr-SECONDARYEMAIL.
               C_segment3-SERIAL_NUM = lt_mkt_attr-SERIAL_NUM.
               C_segment3-SOCIETY_MEMBER = lt_mkt_attr-SOCIETY_MEMBER.
               C_segment3-SOC_CONTNO_LL = lt_mkt_attr-SOC_CONTNO_LL.
               C_segment3-SOC_CONTNO_MOB = lt_mkt_attr-SOC_CONTNO_MOB.
               C_segment3-SOC_CONT_DESIG = lt_mkt_attr-SOC_CONT_DESIG.
               C_segment3-SOC_CONT_PER_NAM = lt_mkt_attr-SOC_CONT_PER_NAM.
               C_segment3-STANCHART = lt_mkt_attr-STANCHART.
               C_segment3-ST_CODE = lt_mkt_attr-ST_CODE.
               C_segment3-ST_CODE_OLD = lt_mkt_attr-ST_CODE_OLD.
               C_segment3-ST_EMP_CODE = lt_mkt_attr-ST_EMP_CODE.
               C_segment3-TEENAGERS = lt_mkt_attr-TEENAGERS.
               C_segment3-SBI = lt_mkt_attr-SBI.
               C_segment3-ZLAT1 = lt_mkt_attr-ZLAT1.
               C_segment3-ZLONG1 = lt_mkt_attr-ZLONG1.
               C_segment3-ZWING_GEOCODE = lt_mkt_attr-ZWING_GEOCODE.
               C_segment3-ZNAMEPLATE_PHOTO = lt_mkt_attr-ZNAMEPLATE_PHOTO.
               C_segment3-ZLATITUDE = lt_mkt_attr-ZLATITUDE.
               C_segment3-ZLONGITUDE = lt_mkt_attr-ZLONGITUDE.
               C_segment3-ZLATITUDE_N_LONGITUDE = lt_mkt_attr-ZLATITUDE_N_LONGITUDE.
               C_segment3-ZWING_PHOTO = lt_mkt_attr-ZWING_PHOTO.
               C_segment3-ZCATEGORY_SHOPS = lt_mkt_attr-ZCATEGORY_SHOPS.
               C_segment3-ZNUM_OF_SHOPS = lt_mkt_attr-ZNUM_OF_SHOPS.
               C_segment3-ZELECT_SURVILL = lt_mkt_attr-ZELECT_SURVILL.
               C_segment3-ZBUILDING_TYPE = lt_mkt_attr-ZBUILDING_TYPE.
               C_segment3-ZFLATS_PER_FLOOR = lt_mkt_attr-ZFLATS_PER_FLOOR.
               C_segment3-ZBULDNG_FLOOR = lt_mkt_attr-ZBULDNG_FLOOR.
               C_segment3-ZSWIMMING_POOL = lt_mkt_attr-ZSWIMMING_POOL.
               C_segment3-ZGYM = lt_mkt_attr-ZGYM.
               idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA3'.
               idoc_data-sdata = c_segment4.
               append idoc_data.
              c_segment4-others = lt_mkt_attr-others.
              c_segment4-OCCU_OD = lt_mkt_attr-OCCU_OD.
              c_segment4-ZFLAT_TYPE = lt_mkt_attr-ZFLAT_TYPE.
              idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA4'.
               idoc_data-sdata = c_segment4.
               append idoc_data.
            ENDLOOP.
            IDOC_CONTROL-MESTYP = c_messagetype.
            IDOC_CONTROL-DOCTYP = c_idoc_type.
              CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
                EXPORTING
                  MASTER_IDOC_CONTROL                  = IDOC_CONTROL
    *             OBJ_TYPE                             = ''
    *             CHNUM                                = ''
                TABLES
                  COMMUNICATION_IDOC_CONTROL           = t_comm_control
                  MASTER_IDOC_DATA                     = IDOC_DATA
    *           EXCEPTIONS
    *             ERROR_IN_IDOC_CONTROL                = 1
    *             ERROR_WRITING_IDOC_STATUS            = 2
    *             ERROR_IN_IDOC_DATA                   = 3
    *             SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
    *             OTHERS                               = 5
              IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
              ENDIF.
    ENDFUNCTION.
    i implement a badi "CRMXIF_PARTNER_MAP"
    data ls_mkt_attr type zcrmxif_mkt_str.
      LOOP AT cs_data_mapped INTO  ls_data_mapped .
        lv_tabix = sy-tabix.
        loop at ls_data_mapped-ZZPARTNER-ZZMKT_ATTR into ls_mkt_attr.
          read table ls_data_mapped-zzpartner-ZZMKT_ATTR into ls_mkt_attr index 1.
           if ls_mkt_attr is not initial.
                   CALL FUNCTION 'ZCRMXIF_MKT_DATA'
                     EXPORTING
                       EV_MKT_ATTR       = ls_mkt_attr
                   endif.
         endloop.
         read table ls_data_mapped-zzpartner-ZZMKT_ATTR into ls_mkt_attr index 1.
             MODIFY  cs_data_mapped FROM ls_data_mapped INDEX lv_tabix.
      endloop.
    i ddn't get data into sructure.
    please explain how to doit.

Maybe you are looking for