Transfer data from SQL Server 7.0 to Oracle 7.3.3

Hi there,
We need to transfer some of the data (not whole database) from
a SQL Server 7.0 database to an Oracle 7.3.3 database. Are there
any tools that we can use? Which tool do you recommend?
Thanks in advance.
Catherine
null

hi Catherine,
Download the Oracle Migration Workbench for SQL Server 7.0 from
this site. It is located under the Software section of the Oracle
Migration Workbench page.
Regards
John
Catherine (guest) wrote:
: Hi there,
: We need to transfer some of the data (not whole database) from
: a SQL Server 7.0 database to an Oracle 7.3.3 database. Are
there
: any tools that we can use? Which tool do you recommend?
: Thanks in advance.
: Catherine
Oracle Technology Network
http://technet.oracle.com
null

Similar Messages

Extract the data from SQL Server and Import into Oracle

Hi,
I would like to run a daily job that will export the table data from SQL server table (it will be only one or two table) and Import back into Oracle table (it might one or two table tables).
Could you please guide me that how can i do this using either sql server or oracle?
We have oracle 9.2 and sql server 2005.
Normally i do from flat file which is generated by source destination nand i dump into oracle using sql*loader but this time I have to directly extract/export the data from MS Sql server and load into Oracle table, mostly it will reload so i might doing any massaging data during the load.
If you show me the detail approach, it will be really appreciated.
I have access to Sql server but i don't how to use sql server to do this or using oracle as a daily job even becuase have to schedule the job for this as it will be a daily job.
Thanks,
poratips

Unless you can find an open source ODBC driver for SQL Server that runs on Solaris (and I wouldn't be overly hopeful there) Heterogeneous Services would require that you license something-- a third party ODBC driver, a new Oracle instance, or an Oracle Transparent Gateway.
As I stated below, you could certainly use SQL Server's ETL tool, DTS. Oracle's ETL tools would require additional licensing since you're just on 9.2. You could also write a small application (Java or otherwise) that connected to both databases and transferred the data. If you're particularly enterprising, you could load the SQL Server Type 4 JDBC driver into Oracle's JVM and write a Java stored procedure that connected to the SQL Server database via JDBC, but that's a pretty convoluted approach.
Justin

How to select data from Sql server 2005 database tableinto oracle database table

Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professional

Hi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

How can I migrate data from SQL Server 6,5 to Oracle 8?

We have a web site based on Microsoft SQL Server 6.5.Now we plan
to migrate the database to Oracle 8.
We have redesigned the tables structure and created tables under
Oracle 8, so we only need to migrate data from SQL Server.
We've exported data from SQL Server to text files.
How can we import data from files and restore to Oracle tables.
Is there a solution which let us to import data for particular
table columns,not all columns?
We'll be appreciated if somene can give suggestions.
Regards
Michael
null

Thank you for your reply.
I'll try the Oracle sqlloader utility first.
Regards
Micahel
Oracle Migration Workbench Team wrote:
: Michael,
: Oracle sqlloader is user for this sort of operation, see
: Oracle8i Utilities
: Release 8.1.5
: A67792-01
: available online through Oracle Technology Network.
: The Oracle Migration Workbench can be used to create bcp and
: sqlloader scripts, though since you have altered the schema
these
: scripts would need to be altered by hand after generation.
: Some thought has been put into redesigning table structures in
: the Oracle Migration Workbench, but currently it looks like
this
: reengineering will be left to be done by other tools, eg
Oracle
: Designer, once the SQLServer database has been duplicated with
as
: little change as possible onto Oracle.
: Hope that helps,
: Turloch
: Oracle Migration Workbench Team
: Michael (guest) wrote:
: : We have a web site based on Microsoft SQL Server 6.5.Now we
: plan
: : to migrate the database to Oracle 8.
: : We have redesigned the tables structure and created tables
: under
: : Oracle 8, so we only need to migrate data from SQL Server.
: : We've exported data from SQL Server to text files.
: : How can we import data from files and restore to Oracle
tables.
: : Is there a solution which let us to import data for
particular
: : table columns,not all columns?
: : We'll be appreciated if somene can give suggestions.
: : Regards
: : Michael
: Oracle Technology Network
: http://technet.oracle.com
null

Connect & transfer data from SQL Server Database

Hi all,
I would like to connect to MS SQL Server Database and transfer data from the data stored in the SQL Server Database tables into Oracle Tables.
How should I go about doing this ?
P.S.: I am using Oracle 11g and SQL Server 2005
Message was edited by:
Monk

What operating system is your Oracle database running on?
If you're running Oracle on Windows, you can use Heterogeneous Services and Generic Connectivity along with the Microsoft SQL Server ODBC driver to create a database link from Oracle to SQL Server. If you're running Oracle on something other than Windows, you can do the same thing, but you would generally need to license either a third party ODBC driver or one of the Oracle Transparent Gateway products.
Justin

Exporting data from SQL Server database to Oracle database

Hello All,
We need to replicate a table's data of SQL Server database to Oracle database.
Can this task be accomplished using Import/Export wizard or Linked servers?
Can help me regarding which Oracle data access components should i download to do this?
I am using SQL Server 2012.
And i have Oracle 11g release 2 client installed in my system.
Thanks in Advance.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

Yes you can definitely transfer data from SQL server to Oracle Have a look at below links
Export SQL server data to Oracle Using SSIS
Use OLEDB data provider to transfer data from SQL server to Oracle
Using Import Export Wizard
Similar thread
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Conversion from SQL Server 7.0 to Oracle 8 -- Urgent!!

Hi!
I've an urgent task of migrating data from SQL Server 7.0 to
Oracle 8 for Oracle Financials Application. When is the
Migration Workbench for SQL Server 7.0 is going to be released,
please let me know?
And the other question is -- Is there a possiblity that only few
tables from the legacy system can be migrated into Oracle 8? and
if yes, how -- details please?
Thanks,
Neeta.
null

Neeta Singh (guest) wrote:
: Hi!
: I've an urgent task of migrating data from SQL Server 7.0 to
: Oracle 8 for Oracle Financials Application. When is the
: Migration Workbench for SQL Server 7.0 is going to be released,
: please let me know?
: And the other question is -- Is there a possiblity that only
few
: tables from the legacy system can be migrated into Oracle 8?
and
: if yes, how -- details please?
: Thanks,
: Neeta.
We plan on having a beta version of this capability in early
August. Contact [email protected] if you want to register as
a Beta tester.
Yes, you can update the Oracle model in OMW to remove those
tables you are not interested in, you can also select to just
migrate tables & data and nothing else.
Donal
null

Junk arabic details while transfer arabic data from sql server 2000 to orac

We are facing problems to view arabic details in oracle which is transfered from sql server 2000 .
In oracle database we are using charecterset is UTF8.
NLS_CHARACTERSET :UTF8 and NLS_NCHAR_CHARACTERSET:UTF8
Sqlr server collation is SQL_Latin1_General_CP1256_CI_AS.
we are using stored procedure for transfering data from sql server 2000 to oracle.
And i am able to view some arbic details which is not transfered from sql server 2000.
I thing some configuration i need to change in sql server.
Can any one help me out from this issue?

I know that this is not the correct forum to ask this question.
If someone knows this issue please help me.
We were using to import from another intermediate sqlserver and it was successfull.
And more over i cannot change anything in oracle database which is live.
The issue is we are using one intermediate sqlserver for transfering the data to oracle apart from main sqlserver.
now we want to stop the intermediate and need to transfer from main sqlserver to oracle Db.
i guess , i need to change some configuration in main sql server.
Main sql server and intermediate have the same collation.
Could you please help me out from this problem?

Error while exporting data from sql server to excel

Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.

I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error while reversing data from SQL Server to ODI

hi,
I was reversing data from SQL Server Java 1.6_022 in ODI Java 1.5, I was getting error Version Mismatch and I updated ODI Java version to 1.6_022.
And now, I am getting the below error while reversing the data from SQL Server database.
0 : 08001 : java.sql.SQLException: No suitable driver
Looking for the assistance on the same.
Thanks,
Abhay

If everything is fine the reversing should be fine. I would say check again if the Technology of the Model and the also the dataserver is created under the right Technology in topology too.
also if this doesn't help , Please tell us the steps you have carried so far . Also can you try selective reverse is it showing the tables.

Transfer data from File server to SAP R/3 AS

hi, i need to transfer data from file server (http:/.....) to SAP R/3 application server. I have the HTTP Host name (http:/......) and login details. please let me know how i can resolve this.
best regards
Neeraj

Hi
You need to create a RFC Destination with the details what you have, then you can create a RFC Fucntion module to read the data, according to the destination system, you have to code that, once you
pick the data from the destination system, later you need to convert it to SAP Format.
To trace your fm status, there are function module availabe in sap, search with http, you can find.
regards
Praveen

Using Oracle Forms Importing Data From SQL Server into Oracle Tables.

Dear All,
We are using Oracle Forms 10g in windows XP and having OAS 10g and Oracle database 9i.
How can we import data from SQL Server 2005 into Oracle tables using Oracle Forms?
Thanks & Regards
Eidy

I have no idea what "Oracle Hetrogenius Services" is, so I can't help you with that, sorry.
SQL Developer might also assist you. SQL Developer can connect to SQL Server as well as Oracle and has some tools for migration. See the documentation for details:
http://download.oracle.com/docs/cd/E12151_01/doc.150/e12156/toc.htm
For additional help on using SQL Developer for this task, please consult Support or the SQL Developer forum: SQL Developer
Hope this helps,
Jacob

How to extract incremental data from SQL server to oracle tables in ODI

HI All,
In my ODI sql server is install.My Source is in SQL server and my target is in Oracle.
I need to create a interface mapping where i need to extract incremental data from sql server to oracle.
There is a datetime(with Timestamp) field in sql server .I need to pull incremental data based on dateime.
Example = tablename.DateTime > (select '1-jan-11' from dual) .....i am using this query but its not woking.the error is Invalid object name"dual".
We are not going to use Incremental in IKM and LKM.
Request you to please provide any suggestion ASAP.
Thanks,
Lony

You can do that via Variable.
In the interface mapping create a filter on Tablename.DateTime
and put the condition like this
Tablename.DateTime BETWEEN #VAR and in the variable use this query in refreshing tab with oracle schema
SELECT max(start_time)||' AND '||max(END_TIME)+1 from audit_table where ETL_JOB_CODE = '20'In the package call the above variable in refresh mode and then interface.
This way you will pass from the query between and condition date and pass to interface so that SQL Server fetches the data between those too range.
Note:- You might need to tweak the date format so that SQL Server can understand.
Hope this helps.

Reg. Migrating data from SQL Server 2000 to Oracle

Hi All,
I need to migrate a same data from SQL Server 2000 to Oracle 9i.In sql server Export option is there, but the problem is some 30 tables have More than one LONG datatype column in a table. That's why oracle not allow to import.
Could you guys find any tool for the same.
Please do the needful.
Thanks & Regards,
Prathap

hi dermot,
it's very urgent now. Can you please give any solution for this.
and also i tried the SQL developer tool. But i got an below error,
Error starting at line 2 in command:
CREATE USER dbo_testdatalatest IDENTIFIED BY dbo_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:2 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 3 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO dbo_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 4 in command:
CREATE USER epm_testdatalatest IDENTIFIED BY epm_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:4 Column:45
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 5 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO epm_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 6 in command:
CREATE USER lportal_testdatalatest IDENTIFIED BY lportal_testdatalatest DEFAULT TABLESPACE USERS TEMPORARY TABLESPACE TEMP
Error at Command Line:6 Column:49
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 7 in command:
GRANT CREATE SESSION, RESOURCE, CREATE VIEW TO lportal_testdatalatest
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause:    An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action:   Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Error starting at line 8 in command:
connect dbo_testdatalatest/dbo_testdatalatest;
Error report:
Connection Failed
Commit
Regards,
Prathap.R

Loading data from SQL server 2000 to Oracle using OWB 10.2

Hi All,
I have to move data from SQL server to Oracle using OWB. Any idea how to connect to SQL Server thru the OWB design centre console. There is no detail available in the documentation. OWB cocumentation says that "OWB Integrator for Oracle DB & Apps 3.0" is available to connect to Non-Oracle Database (including Sybase, Informix, ODBC).

Hi,
yes, you can use ODBC and configure HSODBC on the database server to create a database link to the sql-server. If your oracle server is microsoft based you are ready, otherwise you have to buy an odbc-driver for linux, unix or whatever you use.
Ciao Stephan

Transfer data from SQL Server 7.0 to Oracle 7.3.3

Similar Messages

Maybe you are looking for