Transfer Digital Performer files into Logic Express?

I have some old recordings that are on a ADAT tape. A friend of mine said he could transfer them to Digital Performer. Does Logic open DP files?
Paul

Unfortunately, as was pointed out, Logic Express does not open Digital Performer files.
Not does it import OMF files, nor Broadcast Wave files, which means you can't export time-stamped waves from DP and import into LE. If you know someone with Logic Pro, it DOES support Broadcast Wave. This could be one work around.
Otherwise, you'll have two options.
1) Import the ADAT recordings directly into LE using an interface that supports ADAT In (MOTU 828mkII comes to mind). This will only work if you can re-assign the inputs of the interface to be the first 8, since LE only "sees" the first 12. This is one of the major limitations of LE, and why it's not really suited for "pro" work.
2) Import into DP, and then bounce the tracks in DP as separate WAVE of AIFF files, then import them directly into LE in the Audio Window. As long as each file starts (and ends, preferably) at the same time (i.e. as set in the DP bounce), you should have no problem aligning the tracks in LE7.
Number 2 is probably the best solution. Just remember that each of the WAVE files created in DP should begin at the same time (i.e. 0 0 0 0). This will GREATLY simplify the import into LE and make aligning the tracks a painless procedure. You can edit later in LE.
Hope this helps.

Similar Messages

Opening Digital Performer files in Logic 8 -- translation programs?

I have decades of Digital Performer files I want to be able to open in Logic 8 without going through a multi-step process (open in DP, save as midi, open in Logic).
Is there a translation program, a method, or even a function within Logic that will streamline the opening of Digital Performer files? There used to be a program years ago that let me open various types of files in DP, so I'm wondering if there's a new equivilant for Logic. (I do realize there will be tweaking necessary after opening, but I just want to get them opened faster and within Logic -- right now they're grayed out, of course.)
thx
Neil

NMcQ wrote:
Yes I've looked through those and understand the long way of doing it, was just wondering if anyone knew of a translation 'shortcut' program, since I have so many to do.
thx
Neil
http://www.solid-state-logic.com/post/pro-convert/index.asp
Some people like it, some don't. If you need something like this, try it.
Cheers
PS I am not endorsing, selling, nor recommending whatever is on that link, moderator...

No sound when i import garage banmd files into logic express 7.1

i have garage band 3.0.4 and logic express 7.1. i just acquired both of these recently and have been trying to transfer my old garage band 2 files into LE. i have no problems putting my songs into garage band 3 but when i open them in logic theres no sound output. everything appears to be working, all the meters light up except the output master all the way at the end of the mix window. i dont get it. some of my GB2 files opened in LE with no problems but others, made with gb3 or exported from gb2 to gb3, wont work. i messed with the preferences, the sound is set to core audio but im still perplexed. anyone else had this problem? help!

thanks, ill give it a try. ive noticed that i dont have any problems when i open my GB2 files directly into LE. its only when i go through GB3. its really a drag, because i just updated and it seems theres no going back. pretty disappointing if you ask me. i updated to GB3 because of its much hyped "resolutions" of old problems, and here i am stuck with new problems. bah! thanks for the help anyway. if anyone knows of an easier/more efficient way to deal with this issue, let me know! thanks again.

Conversion of Digital Performer files to Logic files

What's the way to convert Digital Performer (audio & midi) files to Logic files?

what i do is this:
save as OMF in DP, save as MIDI in DP, sometimes Logic can open the OMF file, it depends on the settings used with DP OMF export. Logic really *****, when it comes to READ OMF files! Some great helper is a software called AVTransfer, that exists for PC. This app converts an OMF file into an OMF(!) file and removes all unnecessary data in the OMF, so every app can open it. This helped me several times.
Another idea is, to put a second of silece on every audio track to position 0 and MERGE all audio tracks, so you get Audio Files that all start at the same position and can be saved as any file format you like. Its faster than you might think: copy this bit of audio to all audio tracks and then select all, MERGE and have a coffee, no need to sit in front of your monitor.
MIDI tracks will have to be exported separatly, bcause they are not saved to an OMF or to audio files.
But you will have to setup your instruments for MIDI playback by hand, maybe save a patch in DP for each software instrument, to load them up in logic again.
Hope that helps.

Is there any way to transfer Digital Performer Projects to Logic Pro 9?

I just bought Logic Pro 9 today. I tried to run a sequence that was recorded in Garage Band and Digital Performer and it looks like the hard drive is too slow to play it all back, although it plays back fine in DP. I tried to save the DP file as an AAF file but some of the audio files were in the wrong place when I played the Logic version. I also have tried saving it as an OMF and Logic is still attempting to open it an hour later. Any ideas on how to get from one to the other without merging/consolidating the files because it appears that Logic is having difficulty playing back the tracks on my Mac Book Pro.
Waves Platinum v 7.0 (32 bit) plugs

http://prodesigntools.com/tag/ddl
Mylenium

$5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success. Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick.
Problem/question:
I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master. No manuals seem to explain that; I just can't find it.
Background/basics:
1. My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9. Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
1a. Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10. So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
2. FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
2a. I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only): www.chickensys.com
2b. Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
2c. I'll then combine them all into Logic Express 9.
So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
THANK YOU and Merry Christmas!!
Andy

OK doesn't look possible. Closing discussion.

ADAT into Logic Express, VERY low signals recorded

I tried Garageband, same problem, so now I am trying Logic Express.
When transferring tracks from an ADAT, through Alesis io/14, into Logic, the resulting sound files captured are VERY low signal. This should be a digitally ACCURATE TRANSFER. The Alesis montoring software on the mac senses the correct signal, the signal meters show correct levels (and sounds great), but Logic hears and records very low signals.
I note the Sound midi pref window only shows 6 channel 32 bit. It won't allow me to change to 8 channel 16 bit. Possible problem or am I chasing ghosts? I exhausted all my ideas.
Any thoughts?
T

Ropher wrote:
Discovering I was unable to import a ".au" file into Logic Express (or Garage Band) I read it into Sound Studio and exported it in a variety of formats. I can now successfully drag to Garage Band files in formats .aif .aifc .sd2 and .wav and get the expected result.
Unfortunately however, I only get the expected result importing these into Logic Express for the .aifc format which plays back at the expected speed with a low-pitched sound (but which doesn't display an uncompressed waveform). Importing the .aif .sd2 or .wav format files however results in the imported file being squeezed into a very short duration with a correspondingly undesirable very high pitch.
Is there some setting or magic incantation I need for reading in audio files to Logic Express without it getting squeezed?
Thanks!
--Roph
Yes. you need to ascend to level 5 before we give that secret incantation.
Really, you need to use a third party converter software, if you are going to use .au files.
Logic is happiest with .aiff, .wav files, but not much else.
Cheers

Importing Digital Performer files..

Is it possible to import a whole Digital Performer project into Logic Pro? Should I export the DP project as OMF?
Thanks a lot!

AFAIA, OMF files do not contain any tempo, time sig, or marker data as do standard MIDI files (SMF). And audio files aren't aligned to any particular bar (except possibly bar 1/beat 1). So while OMF can be used to move audio files from one DAW to another, all of the other important information that you'd normally want to include when xferring a project would be missing.
So it might be a two-step process, where you first prepare a SMF to xfer the above-mentioned data into Logic, and then import your OMF session into the song afterwards.
It might also be a good idea to have at least one audio file in your original session set to bar 1/beat 1, just to act as a benchmark/placeholder so you can be assured that the alignment of your audio files is correct after the import. If for any reason it's not (unlikely, but just to be safe), you could select all of the audio files and slide your benchmark/placeholder file to bar 1/beat 1, after which everything should be aligned as in the original session.
Also, AFAIK, SMPTE offsets aren't included in OMF files either.

Using non apple wav files in logic express 9

Does anyone know how i can use non apple files in logic express 9.i have put them in Bin but cannot get them to play via my midi keyboard.thanks

chazbass wrote:
Does anyone know how i can use non apple files in logic express 9.i have put them in Bin but cannot get them to play via my midi keyboard.thanks
Actually i am not sure i really understand your question because it seems to me that in your subject heading you are asking about " wav " files which are audio files but in your message you refer to playing those files via your midi keyboard which indicates you are trying to play " midi " files and not " audio " files.
If you want to play a audio file:
Create and audio track in a project and the import the "wav" file into that audio track and it should play as an audio file when hit the play button in the transport controls.
Please clarify what type of file you want play using LExpress 9 to give us a better idea as to how to help you.

Bouncing files in Logic Express 9

I am using Logic Express 9. I brought some GarageBand files into Logic to mix. I then bounced the mix to an AIF file for mastering. Later I decided I didn't like the mix and decided to remix the song. I bounced the new mix to a new AIF file but the new AIF file still plays the old mix. I even trashed everything in Logic Express and went back to square 1 and started all over again. But every time I bounce to an AIF file it still plays the old mix. Why is this happening? How can I get it to recognize my new mix? Please help.
Thanks in advance.

Hi, assign a new name to your new bouce, like "project1.aiff" instead that "project.aiff",
Then rename if you want to call it as the past bounce. cheers

Problem importing Garageband songs into Logic Express

Hi I have spent around 4 hours looking for an answer to this problem so hopefully it has'nt been answered before apolgies if it has.
I am trying to import a Garageband Song into Logic Express (7.1) it appears to import it to Logic but when finished it reads file corrupt not a Logic File.
I followed the tutorial opened the GB song and followed the instructions on how to import but I cant import it to Logic without the above message coming up.
Any ideas?
I'm using a MacBook Pro with 10.4.9 on it.Logic is version 7.1 (Is there a known bug when importing?)
Thank you if you can help.
KB.

Hi KB,
Welcome to the forum!
the answer is within your question;
your machine needs the universal Logic express (7.2)
and your GB's probably GB 3.
That's the reason you can open the files.
If you bought version 7 "new"(from the reseler)
ask for version 7.2, as you can't buy crossgrade anymore.
(until logic sells a new one)
"You just bought diesel and your machine's not run on it"
rule number 1: You should Allways look for system requirements and software versions compability!
Cheers,
Jorge

Importing 32 bit aifs and OMF files into Logic

Is it possible to import 32 bit aifs into Logic Express 7 and arrange using an OMF file? If so, how?!
Please help. Thanks in advance!

Have you tried importing it into iTunes? If that works, you could use iTunes to turn it into a file that GB can handle:
http://www.bulletsandbones.com/GB/FAQPages/NeverFail.html

Laptop brokre, managed to recover files onto harddrive, how do i transfer the music files into my library on a new computer, Laptop brokre, managed to recover files onto harddrive, how do i transfer the music files into my library on a new computer

ok so to cut a long story short my itunes account was on a laptop that broke, managed to get photo and music file backed up onto hard drive.
Can i just log into my itunes account on a new pc to sync andbackup my iphone? or do i need to transfer my music file into the account?
Really need some help!
I have an iphone, Ipod and the account on the old laptop.

"I don't have the old computer. It overheated and literally melteddown!"
This is why it has alwasy been very basic to always maintain a backup copy.
Did you fail to do this?
"I have been talked through a back up process of the itouch music on to the new laptop before, but can't remember how to do it. Any ideas on this process."
Again.
The sync is one way - computer to ipod. the only exception is itunes purchases: File>Transfer Purchases
You may be able to buy a 3rd party program to get non-itunes purchased music from the ipod.

Imported 1h 20m file into Logic Pro 7.1.1.it Became Unstable

Imported an hour and twenty minute file into logic, and it became really unstable. i tried to cut the region up, and save the clips as differnt files, but it wouldn't let me stopped playing the file after a certain bar (bar 57).
is this normal behavior?

Try trashing Logic prefs. (Or move to desktop to re-import keycommands)

Import midi-file to logic express 7

hi there
i'm trying to import a midi-file to logic express 7.
always when i import it, there comes a window with "new smpte-frame rate". when i click ok, it doesn't import anything... what can i do?
ps: sorry for my english!

thanks, it works with some midi files. but when i'm saving a file in finale 2007 as a midi file, it doesn't work... i checked the sync prefences and they don't look wrong... it's really strange!

Transfer Digital Performer files into Logic Express?

Similar Messages

Maybe you are looking for