Transfer FI docs using IDocs (FIDDC2) and generate CO-PA
We are trying to transfer FI documents between systems using IDoc (FIDDC2) and we want to generate all documents based on the FI doc and we also need to extend the IDoc with some extra fields for CO-PA characteristic values (profit center,product group, customer group and geography). The transfer works fine, but we are not able to update profitability segment.
On the receiver system the FM AC_DOCUMENT_GENERATE is used to post the documents. The structure T_ACCIT_PA STRUCTURE ACCIT_PA is not used in the function call to AC_DOCUMENT_GENERATE, but our plan was to include. We have tried to single test the function module also filling the T_ACCIT_PA structure. We manage to generate the FI document but the profitability segment is not generated.
We also had an idea about trying to generate the CO-PA using a substitution and the FM COPA_PROFITABILITY_SEGMENT but we have not managed to create profitability segment with the characteristic values.
Regards,
Torje
Could yo resolve your problem??
I have de same problem but i don´t found the information, can you help me??
Similar Messages
-
Incorrect transfer of BOM using IDOCs
Hi,
I am trying to transfer BOM using change pointers between 2 ECC system.First I intial loaded all the BOM's from one ECC to another sucessfully.However when the same BOMs are updated in the source ECC they are not correctly reflected in traget ECC.For eg when I delete an item in source ECC it is not deleted in the target ECC , if I update an item in source ECC a new entry is created in the target ECC for the iem even though the same entry already exists in target ECC.
These are cases when BOM's are first initloaded in target ECC , however when the BOM is created it target ECC via change pointers (not intial loading) then every case works fine. As initial loading is essentail please advice me how can I solve this problem
ThanksHi Madhu,
I use a Z transaction to Maintain BOM data in source ECC.Now my requirement is to transfer this BOM data to another ECC system(target).So in the source system I have configured chage pointers on BOM fields.I have used to Z msg type which is an extension of the msgtype BOMMAT04.I have scheduled a program RBDMIDOC with the Z mssg type.
Now I have loaded all the existing BOM data in the traget ECC system.But when I try update this existing BOM data in the source ECC it is not correctly updated in target system.
But when I create a new BOM in the source system (which is not there in the target system) it sucessfully transferred by the change pointers and idoc mechanism and there by gets created in the target ECC. -
HP Laserjet Pro 400 Printer unable to print docs using both letter and legal paper
HELP!! Have been using an HP Laserjet Pro 400 M425dn dual tray printer for 2 years, along with a Dell laptop. Always had ability to send documents to print using both letter and legal size paper. Under print set-up on laptop, the option checked was always set to "Choose Paper Source by PDF Paper Size". Now I've just purchased an HP Envy All-in-One Desktop, which does not offer that option under Print Set-Up. While it allows for 'Auto Selection' of paper size, you are required to choose either letter or legal size paper. I've called tech support 3 times, the latest call earlier this am, only to be disconnected. Yesterday I was told that I should go on hp/support and update drivers. My husband downloaded drivers, but still no fix. Unless this issue is resolved asap, I will have no option but to return this Envy Desktop, as I cannot run my business without this option.
Anyone have a similar problem? How was it resolved?The available options will (probably) be determined by the printer driver in use.
This , in turn, will be determined partly by which Operating System and version you are using.
Once a printer model has been out in the field for some time (generally when the next generation (or two?) of devices has been announced to supersede it) that model becomes a 'legacy' device, and 'full-specification' printer drivers may no longer be supplied by the printer manufacturer, but basic (i.e. without too many options) drivers will (probably) instead be supplied with the operating system. -
Transfer FI Document using IDOCs
Hi abapers,
I am new to IDOCs. i need to transfer file with documents in external format to the ALE inbound processing of SAP R/3.
The object attributes shown below:
Message type: FIDCCP01
Basic type: FIDCC1
On the 'Start IDOC processing' work step in LSMW, i get an error msg: "FI/CO interface: object type not defined" returned by the status record.
can anyone tell what is my error?
Thanks in advance.Could yo resolve your problem??
I have de same problem but i don´t found the information, can you help me?? -
Data transfer b/w SAP to Java using IDOC and Interface SAP Jco
Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VELHi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P -
How to use IDOC and RFC adapter in 1 scenario?
We have AAA field and BBB field and we want to send AAA field to receiver sap system using IDOC adapter and BBB field to receiver sap system using RFC adapter. But how to use IDOC and RFC adapter in 1 scenario and how to map and what are the design and configuration objects we require to create?
To achieve this you have to use
Two Interface Determinations
Two Communication Channels (IDOC & RFC)
& Two Receiver Aggrements.
Use the Enhanced Interface determination and give your conditions there. Based on you condition your interface mapping will be triggered and data will be sent to IDOC & RFC respectively. -
Using TCOde rscrm_bapi and a query result in a error
Hi All,
When using tcode RSCRM_BAPI the query execution results in a error Query Meta data is Incomplete
Please suggest me the solution for this ASAP.
Regards,
VarmaHi Varma,
is the query working fine?? Otherwise use transaction RSRT2 and "generate a new report"! This should fix problems with query.
Regards,
Adem -
Infotype 0000 Creation using HCM Processes and forms in MSS
Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat -
FB01 posting using IDOC FIDCCP02
We are trying to post accounting transactions from non-SAP system to SAP system using idoc FIDCCP02 and XI as the middleware. Please let me know if anybody has done this before and if yes, please share with me the mandatory fields to send to the idoc.
I looked at the note...But if somebody has done this type of integration, I thought of using their experience to build out the same.
Thank you, -
Error 'Enter order unit' in PIR Change using IDOC INFREC01
Hi All,
I am creating Purchase info record using IDOC INFREC01 and condition type using IDOC COND_A04. Its working fine in case of create PIR.
But If I pass PIR number in the upload with other fields to be chnaged then IDOC goes the in the error with status 51 , Error
"Enter Order unit". I am passing both base unit of measure (MEINS) and purchase order unit (LMEIN).
Kindly help find out the issue....!!!
Thanks in advance.Hi,
Check if you are passing the ISO code for unit of measure?
Also, Try debug using WE19 and find out where you are getting the error.
Hope it helps.
Sujay -
How to Create PO using ME21N and generate and IDoc for it???
Hi All,
Could anyone please tell me step by step process of creating purchase order and generating an IDoc for it.
I have given all the Vendor Details, Purchase Org'n, Account Group and Company Code.
I have given Material Details - Material Number , Quantity , Net Price, Delivery Date and Plant No.
What step do i need to further to complete the PO and generate IDoc for it.
Thanks
ChinnaThanks Naren, Your Answer is Really Helpful.
Now i am able to Generate the IDoc for the PO. But the Status of IDoc is 30.
What does it mean?
Receiver Exists, No Filters, No Interface , No Version Change.
Why isn't my IDoc Posted ??
It says it is ready for Dispatch.
I'll be waiting for ur valuable replies.
Thanks once again Naren,
Chinna -
How to use the Idoc number.(generated by prgram) and ALE
Hi All
I have a problem to use Idocs. I go thru the following steps but can not able to see the final output.
1.Create Segment ( WE31)
2.Create Idoc Type ( WE30 )
3.Create Message Type ( WE81 )
4.Assign Idoc Type to Message Type ( WE82 )
5.Make a report which gives us Idoc number.
Now my problem is where this Idoc number can we used .and how to relate this with ALE.
Regards
ManojHi Manoj,
Use transaction code we02 or we05 to get the idoc no.
The table used are
EDIDC - Control record
EDID4 - Data record
EDIDS - Status record
Regards
Arun -
Transfer data from one server to another server using idocs
hi,crm
i have a data in crm system, i want to download this data and upload into another crm system by using idocs.
please any one explain.Hi Ravi,
my senario is i have to transfer data from crm 5.0 to 7.0.
i have marketing attributes
t-code: bp----> marketing attributes
i want to transfer marketing attributes from A to B.
i created one structure for marketing attributes around 160. and i added this structure fields into custom segments.
i created custom idoc type and i added segments into idoc.
i created one function module for getting data from structure and passing to segments and idoctype.
check the code below.
FUNCTION ZCRMXIF_MKT_DATA.
*"*"Local Interface:
*" IMPORTING
*" REFERENCE(EV_MKT_ATTR) TYPE ZCRMXIF_MKT_STR
Data : c_segment type ZE101CRMXIF_MKT_ATTR_DATA,
c_segment1 type ZE101CRMXIF_MKT_ATTR_DATA1,
c_segment2 type ZE101CRMXIF_MKT_ATTR_DATA2,
c_segment3 type ZE101CRMXIF_MKT_ATTR_DATA3,
c_segment4 type ZE101CRMXIF_MKT_ATTR_DATA4.
data: c_messagetype type c value'zcrmxif_partner_save',
c_idoc_type type c value'zcrmxif_partner_save_mkt',
idoc_control like edidc,
t_comm_control like edidc occurs 0 with header line,
idoc_data like edidd occurs 0 with header line.
data: lt_mkt_attr type Zcrmxif_mkt_str occurs 0 with header line,
ls_mkt_attr like zcrmxif_mkt_str.
loop at lt_mkt_attr.
c_segment-PARTNER = lt_mkt_attr-partner.
c_segment-PARTNER_GUID = lt_mkt_attr-partner_guid.
idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA' .
idoc_data-sdata = c_segment.
append idoc_data.
c_segment1-ADHAR_NUM = lt_mkt_attr-ADHAR_NUM.
c_segment1-ADULTS = lt_mkt_attr-ADULTS.
c_segment1-AGEGROUP = lt_mkt_attr-AGEGROUP.
c_segment1-AG_CODE = lt_mkt_attr-AG_CODE.
c_segment1-AMERICANEXPRESS = lt_mkt_attr-AMERICANEXPRESS.
c_segment1-ANNUALINCOME = lt_mkt_attr-ANNUALINCOME.
c_segment1-AUTO_TYPE_1 = lt_mkt_attr-AUTO_TYPE_1.
c_segment1-AUTO_TYPE_2 = lt_mkt_attr-AUTO_TYPE_2.
c_segment1-AUTO_TYPE_3 = lt_mkt_attr-AUTO_TYPE_3.
c_segment1-A_HOMEDEL = lt_mkt_attr-A_HOMEDEL.
c_segment1-BANKNAME = lt_mkt_attr-BANKNAME.
c_segment1-BLOODPRESSURE = lt_mkt_attr-BLOODPRESSURE.
c_segment1-BPRELATION = lt_mkt_attr-BPRELATION.
c_segment1-BRAND = lt_mkt_attr-BRAND.
c_segment1-CC1001 = lt_mkt_attr-CC1001.
c_segment1-CC1002 = lt_mkt_attr-CC1002.
c_segment1-CCCLASSIC = lt_mkt_attr-CCCLASSIC.
c_segment1-CCGOLD = lt_mkt_attr-CCGOLD.
c_segment1-CCOTHERS = lt_mkt_attr-CCOTHERS.
c_segment1-CCPLAT = lt_mkt_attr-CCPLAT.
c_segment1-CCREDIT = lt_mkt_attr-CCREDIT.
c_segment1-ccsilver = lt_mkt_attr-ccsilver.
c_segment1-CCTITA = lt_mkt_attr-CCTITA.
c_segment1-CDEBIT = lt_mkt_attr-CDEBIT.
c_segment1-CHILDREN = lt_mkt_attr-CHILDREN.
c_segment1-CITIBANK = lt_mkt_attr-CITIBANK.
c_segment1-CNAPP = lt_mkt_attr-CNAPP.
c_segment1-CNC_PRINT = lt_mkt_attr-CNC_PRINT.
c_segment1-CNC_SIZE = lt_mkt_attr-CNC_SIZE.
c_segment1-CNC_SIZE_NEW = lt_mkt_attr-CNC_SIZE_NEW.
c_segment1-CNC_STATUS = lt_mkt_attr-CNC_STATUS.
c_segment1-CNC_TIME_ZONE = lt_mkt_attr-CNC_TIME_ZONE.
c_segment1-CNC_TIME_ZONE_NEW = lt_mkt_attr-CNC_TIME_ZONE_NEW.
c_segment1-CONDFIRSTZ = lt_mkt_attr-CONDFIRSTZ.
c_segment1-COMPANY = lt_mkt_attr-COMPANY.
c_segment1-CONDSECOND = lt_mkt_attr-CONDSECOND.
c_segment1-CONDTHIRD = lt_mkt_attr-CONDTHIRD.
c_segment1-CUSTOMERTYPE = lt_mkt_attr-CUSTOMERTYPE.
c_segment1-CUST_BUSINESS_NAME = lt_mkt_attr-CUST_BUSINESS_NAME.
c_segment1-DECL_DATE = lt_mkt_attr-DECL_DATE.
c_segment1-DED = lt_mkt_attr-DED.
c_segment1-DIST = lt_mkt_attr-DIST.
c_segment1-DNC = lt_mkt_attr-DNC.
c_segment1-DNCEMAIL = lt_mkt_attr-DNCEMAIL.
c_segment1-DNCPHONE = lt_mkt_attr-DNCPHONE.
c_segment1-DNCPOST = lt_mkt_attr-DNCPOST.
c_segment1-DOB_FAM_2 = lt_mkt_attr-DOB_FAM_2.
c_segment1-DOB_FAM_3 = lt_mkt_attr-DOB_FAM_3.
c_segment1-DOB_FAM_4 = lt_mkt_attr-DOB_FAM_4.
c_segment1-PLANG = lt_mkt_attr-PLANG.
* c_segment1-APPL_SNAME = lt_mkt_attr-APPL_SNAME.
idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA1'.
idoc_data-sdata = c_segment4.
append idoc_data.
c_segment2-DTPCARDGIVCOU = lt_mkt_attr-DTPCARDGIVCOU.
c_segment2-DTPCARDOFF = lt_mkt_attr-DTPCARDOFF.
c_segment2-DTPCARDOTHSTORE = lt_mkt_attr-DTPCARDOTHSTORE.
c_segment2-DTPCARDRETCOU = lt_mkt_attr-DTPCARDRETCOU.
c_segment2-DTPCARDSHREDDED = lt_mkt_attr-DTPCARDSHREDDED.
c_segment2-DTWELCOMCALL = lt_mkt_attr-DTWELCOMCALL.
c_segment2-DUDZ = lt_mkt_attr-DUDZ.
c_segment2-EDUDR = lt_mkt_attr-EDUDR.
c_segment2-DTPCARDSTORE = lt_mkt_attr-DTPCARDSTORE.
c_segment2-EDUER = lt_mkt_attr-EDUER.
c_segment2-EDUG = lt_mkt_attr-EDUG.
c_segment2-EDUHS = lt_mkt_attr-EDUHS.
c_segment2-EDULAW = lt_mkt_attr-EDULAW.
c_segment2-FOURWHEELER = lt_mkt_attr-FOURWHEELER.
c_segment2-FULL_NAME = lt_mkt_attr-FULL_NAME.
c_segment2-FWLT15KCC = lt_mkt_attr-FWLT15KCC.
c_segment2-FAMILY_MEMBER_NAME = lt_mkt_attr-FAMILY_MEMBER_NAME.
c_segment2-FAMILYMEMBERS = lt_mkt_attr-FAMILYMEMBERS.
c_segment2-FAMILY_MEMBER_NAME_2 = lt_mkt_attr-FAMILY_MEMBER_NAME_2.
c_segment2-FAMILY_MEMBER_NAME_3 = lt_mkt_attr-FAMILY_MEMBER_NAME_3.
c_segment2-FAMILY_MEMBER_NAME_4 = lt_mkt_attr-FAMILY_MEMBER_NAME_4.
c_segment2-FAMILY_MEMBER_NAME_5 = lt_mkt_attr-FAMILY_MEMBER_NAME_5.
c_segment2-FWLT1KCC = lt_mkt_attr-FWLT1KCC.
c_segment2-FWLT2KCC = lt_mkt_attr-FWLT2KCC.
c_segment2-GEO_WING_LAT = lt_mkt_attr-GEO_WING_LAT.
c_segment2-GEO_WING_LONG = lt_mkt_attr-GEO_WING_LONG.
c_segment2-HDFCBANK = lt_mkt_attr-HDFCBANK.
c_segment2-HSBC = lt_mkt_attr-HSBC.
c_segment2-ICICIBANK = lt_mkt_attr-ICICIBANK.
c_segment2-INCMTO = lt_mkt_attr-INCMTO.
c_segment2-INCT2F = lt_mkt_attr-INCT2F.
c_segment2-INCT2T = lt_mkt_attr-INCT2T.
c_segment2-IND_SECTOR = lt_mkt_attr-IND_SECTOR.
c_segment2-INTERNETCHATTING = lt_mkt_attr-INTERNETCHATTING.
c_segment2-LICENSE_INFO = lt_mkt_attr-LICENSE_INFO.
c_segment2-INTERNET_CONNECT = lt_mkt_attr-INTERNET_CONNECT.
c_segment2-MFAM_INCOME = lt_mkt_attr-MFAM_INCOME.
c_segment2-MODEL_1 = lt_mkt_attr-MODEL_1.
c_segment2-MODEL_2 = lt_mkt_attr-MODEL_2.
c_segment2-MODEL_3 = lt_mkt_attr-MODEL_3.
c_segment2-MOTHERS_NAME = lt_mkt_attr-MOTHERS_NAME.
c_segment2-MO_OF_P = lt_mkt_attr-MO_OF_P.
c_segment2-MO_OF_P2 = lt_mkt_attr-MO_OF_P2.
c_segment2-MO_OF_P3 = lt_mkt_attr-MO_OF_P3.
c_segment2-MY_OF_P3 = lt_mkt_attr-MY_OF_P3.
c_segment2-NOMINEES_NAME = lt_mkt_attr-NOMINEES_NAME.
c_segment2-NONE = lt_mkt_attr-NONE.
c_segment2-OCCU_OD_OTHR = lt_mkt_attr-OCCU_OD_OTHR.
c_segment2-OCC_FAM_1 = lt_mkt_attr-OCC_FAM_1.
c_segment2-OCC_FAM_2 = lt_mkt_attr-OCC_FAM_2.
c_segment2-OCC_FAM_3 = lt_mkt_attr-OCC_FAM_3.
c_segment2-OCC_FAM_4 = lt_mkt_attr-OCC_FAM_4.
c_segment2-OCC_FAM_5 = lt_mkt_attr-OCC_FAM_5.
c_segment2-OCC_NOM = lt_mkt_attr-OCC_NOM.
idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA2'.
idoc_data-sdata = c_segment4.
append idoc_data.
C_segment3-PLANG_OTHR = lt_mkt_attr-PLANG_OTHR.
C_segment3-REF_MAILADD = lt_mkt_attr-REF_MAILADD.
C_segment3-RELATION_FAM_1 = lt_mkt_attr-RELATION_FAM_1.
C_segment3-RELATION_FAM_2 = lt_mkt_attr-RELATION_FAM_2.
C_segment3-RELATION_FAM_3 = lt_mkt_attr-RELATION_FAM_3.
C_segment3-RELATION_FAM_4 = lt_mkt_attr-RELATION_FAM_4.
C_segment3-RELATION_FAM_5 = lt_mkt_attr-RELATION_FAM_5.
C_segment3-REL_ACTIVE_STAT = lt_mkt_attr-REL_ACTIVE_STAT.
C_segment3-REL_KISAN_MITRA_STAT = lt_mkt_attr-REL_KISAN_MITRA_STAT.
C_segment3-REL_NOM = lt_mkt_attr-REL_NOM.
C_segment3-REL_PLASTIC_CARD_STAT = lt_mkt_attr-REL_PLASTIC_CARD_STAT.
C_segment3-REL_STAFF_STAT = lt_mkt_attr-REL_STAFF_STAT.
C_segment3-REMARKS = lt_mkt_attr-REMARKS.
C_segment3-ROCN = lt_mkt_attr-ROCN.
C_segment3-ROCN_FAM_1 = lt_mkt_attr-ROCN_FAM_1.
C_segment3-ROCN_FAM_2 = lt_mkt_attr-ROCN_FAM_2.
C_segment3-ROCN_FAM_3 = lt_mkt_attr-ROCN_FAM_3.
C_segment3-ROCN_FAM_4 = lt_mkt_attr-ROCN_FAM_4.
C_segment3-ROOMS_PER_FLAT = lt_mkt_attr-ROOMS_PER_FLAT.
C_segment3-SCH_NUM = lt_mkt_attr-SCH_NUM .
C_segment3-SECONDARYEMAIL = lt_mkt_attr-SECONDARYEMAIL.
C_segment3-SERIAL_NUM = lt_mkt_attr-SERIAL_NUM.
C_segment3-SOCIETY_MEMBER = lt_mkt_attr-SOCIETY_MEMBER.
C_segment3-SOC_CONTNO_LL = lt_mkt_attr-SOC_CONTNO_LL.
C_segment3-SOC_CONTNO_MOB = lt_mkt_attr-SOC_CONTNO_MOB.
C_segment3-SOC_CONT_DESIG = lt_mkt_attr-SOC_CONT_DESIG.
C_segment3-SOC_CONT_PER_NAM = lt_mkt_attr-SOC_CONT_PER_NAM.
C_segment3-STANCHART = lt_mkt_attr-STANCHART.
C_segment3-ST_CODE = lt_mkt_attr-ST_CODE.
C_segment3-ST_CODE_OLD = lt_mkt_attr-ST_CODE_OLD.
C_segment3-ST_EMP_CODE = lt_mkt_attr-ST_EMP_CODE.
C_segment3-TEENAGERS = lt_mkt_attr-TEENAGERS.
C_segment3-SBI = lt_mkt_attr-SBI.
C_segment3-ZLAT1 = lt_mkt_attr-ZLAT1.
C_segment3-ZLONG1 = lt_mkt_attr-ZLONG1.
C_segment3-ZWING_GEOCODE = lt_mkt_attr-ZWING_GEOCODE.
C_segment3-ZNAMEPLATE_PHOTO = lt_mkt_attr-ZNAMEPLATE_PHOTO.
C_segment3-ZLATITUDE = lt_mkt_attr-ZLATITUDE.
C_segment3-ZLONGITUDE = lt_mkt_attr-ZLONGITUDE.
C_segment3-ZLATITUDE_N_LONGITUDE = lt_mkt_attr-ZLATITUDE_N_LONGITUDE.
C_segment3-ZWING_PHOTO = lt_mkt_attr-ZWING_PHOTO.
C_segment3-ZCATEGORY_SHOPS = lt_mkt_attr-ZCATEGORY_SHOPS.
C_segment3-ZNUM_OF_SHOPS = lt_mkt_attr-ZNUM_OF_SHOPS.
C_segment3-ZELECT_SURVILL = lt_mkt_attr-ZELECT_SURVILL.
C_segment3-ZBUILDING_TYPE = lt_mkt_attr-ZBUILDING_TYPE.
C_segment3-ZFLATS_PER_FLOOR = lt_mkt_attr-ZFLATS_PER_FLOOR.
C_segment3-ZBULDNG_FLOOR = lt_mkt_attr-ZBULDNG_FLOOR.
C_segment3-ZSWIMMING_POOL = lt_mkt_attr-ZSWIMMING_POOL.
C_segment3-ZGYM = lt_mkt_attr-ZGYM.
idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA3'.
idoc_data-sdata = c_segment4.
append idoc_data.
c_segment4-others = lt_mkt_attr-others.
c_segment4-OCCU_OD = lt_mkt_attr-OCCU_OD.
c_segment4-ZFLAT_TYPE = lt_mkt_attr-ZFLAT_TYPE.
idoc_data-segnam = 'ZE101CRMXIF_MKT_ATTR_DATA4'.
idoc_data-sdata = c_segment4.
append idoc_data.
ENDLOOP.
IDOC_CONTROL-MESTYP = c_messagetype.
IDOC_CONTROL-DOCTYP = c_idoc_type.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
EXPORTING
MASTER_IDOC_CONTROL = IDOC_CONTROL
* OBJ_TYPE = ''
* CHNUM = ''
TABLES
COMMUNICATION_IDOC_CONTROL = t_comm_control
MASTER_IDOC_DATA = IDOC_DATA
* EXCEPTIONS
* ERROR_IN_IDOC_CONTROL = 1
* ERROR_WRITING_IDOC_STATUS = 2
* ERROR_IN_IDOC_DATA = 3
* SENDING_LOGICAL_SYSTEM_UNKNOWN = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFUNCTION.
i implement a badi "CRMXIF_PARTNER_MAP"
data ls_mkt_attr type zcrmxif_mkt_str.
LOOP AT cs_data_mapped INTO ls_data_mapped .
lv_tabix = sy-tabix.
loop at ls_data_mapped-ZZPARTNER-ZZMKT_ATTR into ls_mkt_attr.
read table ls_data_mapped-zzpartner-ZZMKT_ATTR into ls_mkt_attr index 1.
if ls_mkt_attr is not initial.
CALL FUNCTION 'ZCRMXIF_MKT_DATA'
EXPORTING
EV_MKT_ATTR = ls_mkt_attr
endif.
endloop.
read table ls_data_mapped-zzpartner-ZZMKT_ATTR into ls_mkt_attr index 1.
MODIFY cs_data_mapped FROM ls_data_mapped INDEX lv_tabix.
endloop.
i ddn't get data into sructure.
please explain how to doit. -
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interfa
Hi
i am try do
Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface
With The help of SDN Contribution
link----
( have look on it)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4943f2b7-0a01-0010-37af-faff35b2f08c
I am getting error in
Partner system as HTTPLOG and "Execute" to check the results
Error is -- Port could not be created
RFC destination HTTPLOG Not specified for system HTTPLOG
any 1 have any idea if plzzzzzzzz...........
Thank u
RamHello .
we are also in process of implementing the same
could you share the knowledge pl?
1)is it a separate add on with ALE to saphr
or using ECC ??
2)can u share the configuration part ??
we are trying it on webas as addon 3.0 . -
How to attempt production orders and get feedback by using IDocs
Hi,
I'm new new to SAP and R3 respectively mySAP. I need to know how to use IDocs (over file system) to attempt production orders to an extern application and how to get the feedback of the whole orders and single operations.
I found the IDoc-base-type "PPCC2RECORDER01" to send production orders. Is that the right base type for production orders?
(In consideration of compatibility and support me was recommend to avoid the old types OPERA2 and CONF21.)
What IDoc-types do I need to get feedback about a production order and its operations?
I hope someone is understanding my questions is able to help me. Please apologize my broken English.
Thanks!
HannesPROGRAM....... ZRCCLORDPROC
TITLE......... Production Odrer Idocs
AUTHOR........ Aveek Ghose
DATE WRITTEN.. 15/09/2006
R/3 RELEASE... 4.6C
=====================================================================*
COPIED FROM... N/A
DESCRIPTION...
*& Creation of production order IDOCs to a given selection
*& This program selects to an input given via the selection screen the *
*& corresponding production orders from the database. Then the function
*& module for creation of planned order idocs is called. *
*& In general this report is called from the report RCCLTRAN, but it *
*& can also be used for its own. *
=====================================================================*
PROGRAM TYPE.. Outbound Interface
DEV. CLASS.... ZPD1
LOGICAL DB.... N/A
=====================================================================*
SCREENS....... N/A
GUI TITLE..... N/A
GUI STATUS.... N/A
TRANSACTIONS.. N/A
USER EXITS.... N/A
=====================================================================*
CHANGE HISTORY *
Date By Correction Number & Brief Description Release
Tables / Structures
REPORT zrcclordproc
NO STANDARD PAGE HEADING
MESSAGE-ID ZCUST
LINE-COUNT 65(0)
LINE-SIZE 255.
INCLUDE RCORDO01. " PBO-Modules *
INCLUDE RCORDI01. " PAI-Modules *
INCLUDE RCORDF01. " FORM-Routines *
--> Global data
TYPE-POOLS: cloi.
include zprodata. "Types / constants for Orderselection
include zrcordtop. "Tables / Data for this report
include zrcordtop1.
include yrccl_constants.
TABLES : jcds,
tvarv,
zzzz_xref_data.
TYPES: BEGIN OF ty_date,
aufnr TYPE aufnr,
aedat TYPE aufaedat,
aezeit TYPE co_chg_time,
erdat TYPE auferfdat,
erfzeit TYPE co_ins_time,
loekz TYPE aufloekz,
indicator(1) TYPE c,
END OF ty_date.
DATA: is_enhancement type isu_ord_segments_determine.
DATA: itab_date TYPE STANDARD TABLE OF ty_date
INITIAL SIZE 0 WITH HEADER LINE.
DATA: f_objnr TYPE j_objnr.
DATA: g_report_sub_head(72) TYPE c, "Sub-Header hold area
g_report_head(72) TYPE c, "Header hold area
g_run_date(72) TYPE c, "Holds message for Run date
g_run_time(72) TYPE c. "Holds message for Run time
DATA:
f_old_date TYPE datum,
f_old_time TYPE uzeit,
f_continue(1) TYPE c.
END OF INSERTION DS001
--> Überschrift für sonstige Einstellungen
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK miscellaneous WITH FRAME.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN COMMENT 1(30) text-001. "#EC
SELECTION-SCREEN SKIP 1.
*>> Logical system comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-002.
SELECTION-SCREEN POSITION 35.
PARAMETERS opt_sys LIKE tbdlst-logsys.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-003.
SELECTION-SCREEN POSITION 35.
PARAMETERS mestyp LIKE tbdme-mestyp.
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-004.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_date TYPE sydatum. "last run date
SELECTION-SCREEN END OF LINE.
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-005.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_time TYPE syuzeit. "last run time
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK MISCELLANEOUS.
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-006.
SELECTION-SCREEN POSITION 35.
PARAMETERS: p_update AS CHECKBOX DEFAULT space.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-007.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_rundt FOR sy-datum NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
*MOD-006
*>> Messagetype comes from Report RCCLTRANS
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(30) text-008.
SELECTION-SCREEN POSITION 32.
SELECT-OPTIONS: s_runtm FOR sy-uzeit NO-EXTENSION.
SELECTION-SCREEN END OF LINE.
*MOD-006
**MOD-006
*SELECTION-SCREEN BEGIN OF LINE.
*SELECTION-SCREEN COMMENT 3(30) text-009.
*SELECTION-SCREEN POSITION 32.
*SELECT-OPTIONS: s_emat FOR zzzz_xref_data-z_in_value.
*SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK miscellaneous.
**MOD-006
Write selected AUFPL numbers via ranges table to memory ?
PARAMETERS:
ordtomem TYPE cloi_x DEFAULT '' NO-DISPLAY. "X: yes
do not select from MARC, but use ranges tables directly. MK 4.0C
matnr_gl and werks_gl must have the same length.
PARAMETERS: no_sel TYPE c DEFAULT ' ' NO-DISPLAY.
--> Normal selection parameters for ORD comes from the logical db
*& Event START-OF-SELECTION
START-OF-SELECTION.
--> Select the ORD according to the selected
MRP controller, Material, work center and plant
*MOD-006
Validate the last run date & Time
PERFORM validate_last_run_date_time.
*MOD-006
BEGIN OF INSERTION DS001
get the entry of the last program run
select single * for update from ycloidownlprot
where logsys = OPT_SYS and
downloadtype eq C_DOWNL_PROCESS_ORDERS.
if YCLOIDOWNLPROT-IN_PROGRESS eq CLOI_TRUE.
program is already running, do not allow to start again
write : / text-004, YCLOIDOWNLPROT-USERNAME.
exit.
endif.
YCLOIDOWNLPROT-MANDT = SY-MANDT.
YCLOIDOWNLPROT-LOGSYS = OPT_SYS.
YCLOIDOWNLPROT-START_DATE = SY-DATUM.
YCLOIDOWNLPROT-START_TIME = SY-UZEIT.
YCLOIDOWNLPROT-USERNAME = SY-UNAME.
YCLOIDOWNLPROT-DOWNLOADTYPE = C_DOWNL_PROCESS_ORDERS.
YCLOIDOWNLPROT-IN_PROGRESS = CLOI_TRUE.
insert or update entry (dependant if entry already exists)
MODIFY YCLOIDOWNLPROT.
COMMIT WORK.
CLEAR CREATED_MASTERIDOCS_PRO.
EXPORT CREATED_MASTERIDOCS_PRO TO MEMORY ID 'YLOI001'.
END OF INSERTION DS001
BEGIN OF INSERTION DS001
if not sscrfields-ucomm = 'ONLI'. mk zu 4.0
exit.
endif.
if s_dispo is initial and
s_matnr is initial and
s_arbpl is initial and
s_werks is initial.
exit.
endif.
Send only orders with type 40 - process orders
p_autyp = '40'.
END OF INSERTION DS001
*>> Put the ranges tabs back into matwrk list if no selection (NO_SEL)
IF no_sel = cloi_true.
CLEAR t_matwrk_key. REFRESH t_matwrk_key.
LOOP AT s_matnr.
t_matwrk_key-matnr = s_matnr-low.
READ TABLE s_werks INDEX sy-tabix.
t_matwrk_key-werks = s_werks-low.
APPEND t_matwrk_key.
ENDLOOP.
SORT t_matwrk_key BY matnr werks.
DELETE ADJACENT DUPLICATES FROM t_matwrk_key.
delete duplicate duplicates from ranges table. Therfore sort by LOW
(HIGH is not used in this case).
SORT s_matnr BY low.
DELETE ADJACENT DUPLICATES FROM s_matnr.
SORT s_werks BY low.
DELETE ADJACENT DUPLICATES FROM s_werks.
ENDIF.
--> Determine which segments are selected in the message type
PERFORM ord_segments_determine
USING mestyp
CHANGING afpo_x
jstk_x
afab_x
affl_x
afvo_x
kbed_x
jstv_x
resb_x
kbeu_x
afuv_x
is_enhancement
jstu_x.
Export the flags to the memory, because the following subroutine
must not have any parameters !!!
EXPORT affl_x
afvo_x
kbed_x
resb_x
kbeu_x
afuv_x
TO MEMORY ID 'LOI03'.
MK 19980326 enhanced selections on header/operation level
get selection profile for log system from customizing if available
SELECT SINGLE * FROM tcloi9 WHERE logsys = opt_sys.
if entry exists for the logical system
IF sy-subrc = 0.
if an selection profile for the order is entered, use it for selection
IF NOT tcloi9-ord_selid IS INITIAL.
p_selid = tcloi9-ord_selid.
ENDIF.
IF NOT tcloi9-ord_opr_selid IS INITIAL AND
NOT afvo_x IS INITIAL AND NOT affl_x IS INITIAL.
ord_opr_selid = tcloi9-ord_opr_selid.
ENDIF.
ENDIF.
initialize control key table for selections
CALL FUNCTION 'CLOI_STEUS_GET'
EXPORTING
logsys_to_init = opt_sys
IMPORTING
no_entry_for_logsys = no_entry_for_logsys
TABLES
t_steus = t_steus
EXCEPTIONS
logsys_not_initialized = 1
OTHERS = 2.
Write structure information into the memory
perform fill_memory_selobj.
-> import table with already sent orders
IMPORT gt_aufnrdone FROM MEMORY ID 'LOIAUFNRTAB'. "N599845
SORT gt_aufnrdone BY low. "N599845
--> Read header information
GET ioheader.
Check if material/plant combination is selected MK 4.0C
CLEAR check_flg.
IF no_sel = cloi_true.
READ TABLE t_matwrk_key
WITH KEY matnr = ioheader-matnr
werks = ioheader-werks BINARY SEARCH.
IF sy-subrc <> 0.
check_flg = cloi_true.
ENDIF.
ENDIF.
-> check if order was already sent
IF NOT gt_aufnrdone[] IS INITIAL. "N599845
READ TABLE gt_aufnrdone WITH KEY "N599845
low = ioheader-aufnr "N599845
TRANSPORTING NO FIELDS "N599845
BINARY SEARCH. "N599845
IF sy-subrc = 0. "N599845
-> order already sent
check_flg = cloi_true. "N599845
ENDIF. "N599845
ENDIF. "N599845
leave GET routine if check_flg is set.
CHECK check_flg IS INITIAL.
CLEAR t_afpo. REFRESH t_afpo.
CLEAR t_affl. REFRESH t_affl.
MOVE-CORRESPONDING ioheader TO t_afko.
GET ioheader LATE.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
clear f_continue.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
( ioheader-aedat is initial and
ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF IOHEADER-ERDAT GT F_OLD_DATE OR
( IOHEADER-ERDAT EQ F_OLD_DATE AND
IOHEADER-ERFZEIT GE F_OLD_TIME ).
f_continue = 'X'.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED dat is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
IOHEADER-AEZEIT GE F_OLD_TIME.
f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
WHERE OBJNR = F_OBJNR
AND STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
STAT EQ 'I0045' AND
INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft Beg. WA 354/99
ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR " Beg JB_02
( F_OLD_DATE EQ JCDS-UDATE AND
F_OLD_TIME GT JCDS-UTIME ) ) AND " End JB_02
SY-SUBRC EQ 0.
CLEAR F_CONTINUE.
ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
t_afko-t_afpo = t_afpo[].
t_afko-t_jstk = t_jstk[].
t_afko-t_affl = t_affl[].
t_afko-t_afab = t_afab[].
APPEND t_afko.
IF jstk_x = cloi_x.
t_objnr-objnr = ioheader-objnr.
APPEND t_objnr.
ENDIF.
*---> Remember the orders that are already selected for the global
selection parameters
IF ordtomem = cloi_x. "write order numbers to memory
t_aufnr_range_done-sign = 'I'.
t_aufnr_range_done-option = 'NE'.
t_aufnr_range_done-low = ioheader-aufpl.
APPEND t_aufnr_range_done.
ENDIF.
*---> Remember the orders internal/external keys for AFAB (relationship)
IF afab_x = cloi_x.
MOVE-CORRESPONDING ioheader TO t_aufpl_aufnr.
APPEND t_aufpl_aufnr.
ENDIF.
check afpo_x = cloi_x.
GET ioitem.
BEGIN OF INSERTION DS001
Check whether the process order has been changed since the last
run of the program
CLEAR F_CONTINUE.
if the CHANGED date is greater than the last run or initial
IF IOHEADER-AEDAT GT F_OLD_DATE OR
( ioheader-aedat is initial and
ioheader-aezeit is initial ).
if the CHANGED date is initial check the creation date
if ioheader-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF IOHEADER-ERDAT GT F_OLD_DATE OR
( IOHEADER-ERDAT EQ F_OLD_DATE AND
IOHEADER-ERFZEIT GE F_OLD_TIME ).
f_continue = 'X'.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED date is not initial check it against the last run
ELSEIF IOHEADER-AEDAT EQ F_OLD_DATE AND
IOHEADER-AEZEIT GE F_OLD_TIME.
f_continue ='X'.
endif.
Aenderung 295/99 Selektions-Aenderung vom 26. August 99
Wenn Auftrag bereits techn. abgeschlossen ist, so darf kein IDOC
erzeugt werden, wenn Auftrag zum löschen vorgemerkt wird.
CONCATENATE 'OR' IOHEADER-AUFNR INTO F_OBJNR.
SELECT SINGLE * FROM JEST
WHERE OBJNR = F_OBJNR
AND STAT = 'I0045'.
IF JEST-INACT EQ SPACE AND SY-SUBRC EQ 0.
SELECT * FROM JCDS WHERE OBJNR EQ F_OBJNR AND
STAT EQ 'I0045' AND
INACT EQ SPACE.
letzte Aenderung des Status TABG wird geprueft
ENDSELECT.
IF ( F_OLD_DATE GT JCDS-UDATE OR " Beg JB_02
( F_OLD_DATE EQ JCDS-UDATE AND
F_OLD_TIME GT JCDS-UTIME ) ) AND " End JB_02
SY-SUBRC EQ 0.
CLEAR F_CONTINUE.
ENDIF.
ENDIF.
Ende 295/99
check f_continue eq 'X'.
END OF INSERTION DS001
IF afpo_x = cloi_x.
MOVE-CORRESPONDING ioitem TO t_afpo.
APPEND t_afpo.
ENDIF.
Put matnr and ltrmi in a help structure, which later goes to t_afpo
IF ioitem-posnr = '0001'.
MOVE-CORRESPONDING ioitem TO help_afpo.
APPEND help_afpo.
put PSP element (internal key) into order header. Unique for positions
IF t_afko-pspel IS INITIAL.
t_afko-pspel = ioitem-projn.
ENDIF.
ENDIF.
CHECK affl_x = cloi_x.
GET iosequen.
CLEAR t_afvo. REFRESH t_afvo.
MOVE-CORRESPONDING iosequen TO t_affl.
GET iosequen LATE.
t_affl-t_afvo = t_afvo[].
APPEND t_affl.
CHECK afvo_x = cloi_x.
GET iooper.
CLEAR t_kbed. REFRESH t_kbed.
CLEAR t_afuv. REFRESH t_afuv.
CLEAR t_resb. REFRESH t_resb.
MOVE-CORRESPONDING iooper TO t_afvo.
"Temporary storing of operation information if for a phase
"the corresponding operation has is needed
MOVE-CORRESPONDING iooper TO t_aufpl_aplzl_vornr.
APPEND t_aufpl_aplzl_vornr.
check, if selection profile (if exists) for the operation is ok
IF NOT ord_opr_selid IS INITIAL.
CALL FUNCTION 'STATUS_CHECK_BY_SELSCHEM'
EXPORTING
objnr = iooper-objnr
selid = ord_opr_selid
IMPORTING
fullfill = status_ok
EXCEPTIONS
no_stat_tab = 1
no_stat_scheme = 2
OTHERS = 3.
IF sy-subrc <> 0.
status_ok = cloi_x.
ENDIF.
ELSE.
status_ok = cloi_x.
ENDIF.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
READ TABLE t_steus WITH KEY
steus = iooper-steus BINARY SEARCH.
IF sy-subrc <> 0.
CLEAR control_key_ok.
ENDIF.
ENDIF.
CHECK NOT status_ok IS INITIAL.
CHECK NOT control_key_ok IS INITIAL.
GET iooper LATE.
t_afvo-t_kbed = t_kbed[].
t_afvo-t_afuv = t_afuv[].
t_afvo-t_resb = t_resb[].
APPEND t_afvo.
IF jstv_x = cloi_x.
t_objnr-objnr = iooper-objnr.
APPEND t_objnr.
ENDIF.
CHECK kbed_x = cloi_x.
GET ioopcap.
MOVE-CORRESPONDING ioopcap TO t_kbed.
APPEND t_kbed.
CHECK resb_x = cloi_x.
GET ioopcomp.
do not transfer RESB entries with deletion flag
CHECK ioopcomp-xloek IS INITIAL.
MOVE-CORRESPONDING ioopcomp TO t_resb.
APPEND t_resb.
CHECK afuv_x = cloi_x.
GET iosoper.
CLEAR t_kbeu. REFRESH t_kbeu.
MOVE-CORRESPONDING iosoper TO t_afuv.
check if control key (STEUS) should not be selected.
control_key_ok = cloi_x.
IF no_entry_for_logsys IS INITIAL.
READ TABLE t_steus WITH KEY
steus = iooper-steus BINARY SEARCH.
IF sy-subrc <> 0.
CLEAR control_key_ok.
ENDIF.
ENDIF.
CHECK NOT control_key_ok IS INITIAL.
GET iosoper LATE.
t_afuv-t_kbeu = t_kbeu[].
APPEND t_afuv.
IF jstv_x = cloi_x.
t_objnr-objnr = iosoper-objnr.
APPEND t_objnr.
ENDIF.
CHECK kbeu_x = cloi_x.
GET iosocap.
MOVE-CORRESPONDING iosocap TO t_kbeu.
APPEND t_kbeu.
*& Event END-OF-SELECTION
END-OF-SELECTION.
*MOD-006
DATA: itab_matnr TYPE zzzz_xref_data OCCURS 0.
DATA: l_wa_matnr TYPE zzzz_xref_data.
DATA: l_wa_matnr_value TYPE zzzz_xref_data-z_in_value.
DATA: l_wa_afko TYPE cloi_afko_struct.
SELECT *
FROM zzzz_xref_data
APPENDING TABLE itab_matnr
WHERE trans_id = 'ZELCUSMATLOOKUP' AND
( z_in_value IN s_matnr OR
z_out_value IN s_matnr ).
IF sy-subrc = 0.
LOOP AT ITAB_MATNR INTO L_WA_MATNR.
L_WA_MATNR_VALUE = L_WA_MATNR-z_OUT_VALUE.
S_MATNR-LOW = L_WA_MATNR_VALUE.
S_MATNR-SIGN = 'I'.
S_MATNR-OPTION = 'EQ'.
APPEND S_MATNR.
ENDLOOP.
DELETE itab_matnr WHERE NOT in_value IN s_emat.
SORT itab_matnr BY out_value.
ENDIF.
CLEAR: l_wa_matnr.
**MOD-010
Data which is not in the material lookup table but in the T_AFKO.
LOOP AT t_afko INTO l_wa_afko.
READ TABLE S_MATNR WITH KEY LOW = L_WA_AFKO-MATNR BINARY SEARCH.
READ TABLE itab_matnr INTO l_wa_matnr
WITH KEY z_out_value = l_wa_afko-matnr BINARY SEARCH.
IF sy-subrc NE 0.
l_wa_afko-rgekz = 'X'.
MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
ENDIF.
IF NOT P_DATE IS INITIAL.
IF T_AFKO-GSTRP < p_date OR
( T_AFKO-GSTRP = p_date AND
T_AFKO-GSUZP > p_time ).
L_WA_AFKO-RGEKZ = 'X'.
MODIFY T_AFKO FROM L_WA_AFKO TRANSPORTING RGEKZ.
ENDIF.
ENDIF.
ENDLOOP.
Delete Data which is not in the material lookup
table but in the T_AFKO.
DELETE t_afko WHERE rgekz = 'X'.
*MOD-010
*MOD-006
BEGIN OF INSERTION DS001
DATA: l_wa_itab_date TYPE ty_date.
Check whether the process order has been changed since the last
run of the program
CLEAR f_continue.
IF NOT t_afko IS INITIAL.
SELECT aufnr aedat aezeit erdat erfzeit loekz
INTO TABLE itab_date
FROM aufk
FOR ALL ENTRIES IN t_afko
WHERE aufnr = t_afko-aufnr.
IF sy-subrc = 0.
IF NOT p_date IS INITIAL.
CLEAR: itab_date.
Check whether the process order has been changed since the last
run of the program
LOOP AT itab_date INTO l_wa_itab_date.
if the CHANGED date is greater than the last run or initial
IF l_wa_itab_date-aedat GT p_date OR
( l_wa_itab_date-aedat IS INITIAL AND
l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF l_wa_itab_date-erdat GT p_date OR
( l_wa_itab_date-erdat EQ p_date AND
l_wa_itab_date-erfzeit GE p_time ).
f_continue = 'X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
ENDIF.
ELSE.
f_continue = 'X'.
ENDIF.
if the CHANGED dat is not initial check it against the last run
ELSEIF l_wa_itab_date-aedat EQ p_date AND
l_wa_itab_date-aezeit GE p_time.
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date TRANSPORTING indicator.
ENDIF.
ENDLOOP.
*MOD-006
ELSE.
CLEAR: ITAB_DATE.
LOOP AT ITAB_DATE INTO L_WA_ITAB_DATE.
if the CHANGED date is greater than the last run or initial
IF L_WA_ITAB_DATE-AEDAT GT P_RUNDT OR
( L_WA_ITAB_DATE-aedat is initial and
L_WA_ITAB_DATE-aezeit is initial ).
if the CHANGED date is initial check the creation date
if l_wa_itab_date-aedat is initial.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF L_WA_ITAB_DATE-ERDAT GT P_RUNDT OR
( L_WA_ITAB_DATE-ERDAT EQ P_RUNDT AND
L_WA_ITAB_DATE-ERFZEIT GE S_RUNTM-LOW OR
L_WA_ITAB_DATE-ERFZEIT LE S_RUNTM-HIGH ).
f_continue = 'X'.
else.
l_wa_itab_date-indicator = 'X'.
MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
TRANSPORTING INDICATOR.
endif.
else.
f_continue = 'X'.
endif.
if the CHANGED dat is not initial check it against the last run
ELSEIF L_WA_ITAB_DATE-AEDAT EQ P_RUNDT AND
L_WA_ITAB_DATE-AEZEIT GE S_RUNTM-LOW.
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY ITAB_DATE FROM L_WA_ITAB_DATE
TRANSPORTING INDICATOR.
endif.
ENDLOOP.
*MOD-006
ENDIF.
ENDIF.
ENDIF.
DELETE ITAB_DATE WHERE INDICATOR = 'X'.
*MOD-006
CLEAR: itab_date.
IF s_rundt-high IS INITIAL AND NOT s_rundt IS INITIAL.
s_rundt-high = sy-datum.
ENDIF.
LOOP AT itab_date INTO l_wa_itab_date.
IF NOT s_rundt IS INITIAL.
if the CHANGED date is greater than the last run or initial
IF ( l_wa_itab_date-aedat IS INITIAL AND
l_wa_itab_date-aezeit IS INITIAL ).
if the CHANGED date is initial check the creation date
IF l_wa_itab_date-aedat IS INITIAL.
if the creation date is greater than or equal to the date of the last
run, if it is equal the creation time must be later or equal to the
start time of the last run
IF ( l_wa_itab_date-erdat GT s_rundt-low AND
l_wa_itab_date-erfzeit GT s_runtm-low ) AND
( l_wa_itab_date-erdat LT s_rundt-high AND
l_wa_itab_date-erfzeit LT s_runtm-high ).
f_continue = 'X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date
TRANSPORTING indicator.
ENDIF.
ELSE.
f_continue = 'X'.
ENDIF.
if the CHANGED dat is not initial check it against the last run
ELSEIF ( l_wa_itab_date-aedat GE s_rundt-low AND
l_wa_itab_date-aezeit GE s_runtm-low ) AND
( l_wa_itab_date-aedat LE s_rundt-high AND
l_wa_itab_date-aezeit LE s_runtm-high ).
f_continue ='X'.
ELSE.
l_wa_itab_date-indicator = 'X'.
MODIFY itab_date FROM l_wa_itab_date
TRANSPORTING indicator.
ENDIF.
ENDIF.
ENDLOOP.
DELETE itab_date WHERE indicator = 'X'.
*MOD-006
**MOD-006
LOOP AT t_afko INTO l_wa_afko.
READ TABLE itab_date INTO l_wa_itab_date
WITH KEY aufnr = l_wa_afko-aufnr BINARY SEARCH.
IF sy-subrc NE 0.
l_wa_afko-rgekz = 'X'.
MODIFY t_afko FROM l_wa_afko TRANSPORTING rgekz.
ENDIF.
ENDLOOP.
DELETE t_afko WHERE rgekz = 'X'.
**MOD-006
-> initialize logical data base to reduce memory consumption
PERFORM ldb_process_init(sapdbioc)
CHANGING
lv_subrc.
--> add information to the order structure that is not
selected via logical database:
- if AFVO-entry is a phase (phflg) --> fill field for
corresponding operation number (PVZNR)
The internal node number (aplzl) of the corresponding operation
is in field PVZKN of the phase
- relationship information: E1AFABL
especially: select external numbers for the used
internal numbers in the table AFAB
- status information of the order header: E1JSTKL
- status information of the operation: E1JSTVL
--> Put matnr and ltrmi in the table t_afko
SORT t_afko BY aufnr.
LOOP AT help_afpo.
READ TABLE t_afko WITH KEY aufnr = help_afpo-aufnr
ASSIGNING -gltri = help_afpo-ltrmi.
ENDIF.
ENDLOOP.
--> Select entries for order and operation status
IF NOT t_objnr[] IS INITIAL.
SELECT objnr stat FROM jest INTO TABLE t_jest2
FOR ALL ENTRIES IN t_objnr
WHERE objnr = t_objnr-objnr
AND inact <> 'X'.
ENDIF.
--> Select entries for relationships from afab for all orders
into table t_afab_tmp
SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
IF afab_x = cloi_x AND NOT t_aufpl_aufnr[] IS INITIAL.
-> select afab data
SELECT * FROM afab INTO TABLE t_afab_tmp
FOR ALL ENTRIES IN t_aufpl_aufnr
WHERE aufpl_vor = t_aufpl_aufnr-aufpl.
SELECT * FROM afab APPENDING TABLE t_afab_tmp
FOR ALL ENTRIES IN t_aufpl_aufnr
WHERE aufpl_nch = t_aufpl_aufnr-aufpl.
SORT t_afab_tmp
BY aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
DELETE ADJACENT DUPLICATES FROM t_afab_tmp
COMPARING aufpl_vor aplzl_vor aufpl_nch aplzl_nch aobar mimax.
-> read external order numbers out of data base
CLEAR t_aufpl. REFRESH t_aufpl.
LOOP AT t_afab_tmp ASSIGNING -aufpl_nch.
COLLECT t_aufpl.
ENDLOOP.
CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
IF NOT t_aufpl[] IS INITIAL.
SELECT aufpl aufnr FROM afko INTO TABLE t_aufpl_aufnr
FOR ALL ENTRIES IN t_aufpl
WHERE aufpl = t_aufpl-aufpl.
SORT t_aufpl_aufnr BY aufpl.
ENDIF.
-> add order numbers to afab data
LOOP AT t_afab_tmp ASSIGNING -aufnr_nch = t_aufpl_aufnr-aufnr.
ENDIF.
ENDLOOP.
-> read operation numbers out of data base
CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
LOOP AT t_afab_tmp ASSIGNING -aplzl_nch.
COLLECT t_aufpl_aplzl.
ENDLOOP.
IF NOT t_aufpl_aplzl[] IS INITIAL.
SELECT aufpl aplzl vornr FROM afvc
APPENDING TABLE t_aufpl_aplzl_vornr
FOR ALL ENTRIES IN t_aufpl_aplzl
WHERE aufpl = t_aufpl_aplzl-aufpl
AND aplzl = t_aufpl_aplzl-aplzl.
SORT t_aufpl_aplzl_vornr BY aufpl aplzl.
ENDIF.
-> add operation numbers to afab data
LOOP AT t_afab_tmp ASSIGNING -vornr_nch = t_aufpl_aplzl_vornr-vornr.
ENDIF.
ENDLOOP.
ENDIF. "afab_x
--> fill AFAB (relationship information) and status information
SORT t_aufpl_aufnr BY aufnr.
LOOP AT t_afko ASSIGNING .
-> fill order head status information
IF jstk_x = cloi_x.
CLEAR t_jstk. REFRESH t_jstk.
LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstk = t_jstk[].
ENDIF.
-> fill afab information
IF afab_x = cloi_x.
CLEAR t_aufpl_aufnr.
READ TABLE t_aufpl_aufnr WITH KEY
aufnr = -t_afab = t_afab[].
ENDIF.
-> fill operation and suboperation status information
IF jstv_x = cloi_x OR afvo_x = cloi_x.
LOOP AT .
-> read status information of suboperation
IF jstu_x = cloi_x.
LOOP AT -t_jstu = t_jstu[].
ENDLOOP.
ENDIF.
-> read status information of operation
IF jstv_x = cloi_x.
CLEAR t_jstv. REFRESH t_jstv.
LOOP AT t_jest2 INTO wa_tjest2 WHERE objnr = -t_jstv = t_jstv[].
ENDIF.
-> Read operation for a phase
IF NOT -pvznr = t_aufpl_aplzl_vornr-vornr.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDIF.
-> collect order numbers
CLEAR wa_aufnrdone.
wa_aufnrdone-low = -aufnr.
APPEND wa_aufnrdone TO lt_aufnrdone.
ENDLOOP.
-> append collected order numbers to global table
APPEND LINES OF lt_aufnrdone TO gt_aufnrdone.
EXPORT gt_aufnrdone TO MEMORY ID 'LOIAUFNRTAB'.
-> free large tables
CLEAR t_jest2. REFRESH t_jest2.
CLEAR t_afab_tmp. REFRESH t_afab_tmp.
CLEAR t_aufpl. REFRESH t_aufpl.
CLEAR t_aufpl_aufnr. REFRESH t_aufpl_aufnr.
CLEAR t_aufpl_aplzl. REFRESH t_aufpl_aplzl.
CLEAR t_aufpl_aplzl_vornr. REFRESH t_aufpl_aplzl_vornr.
-> create idocs
CALL FUNCTION 'CLOI_MASTERIDOC_CREATE_LOIPRO'
EXPORTING
opt_sys = opt_sys
message_type = mestyp
TABLES
order_data = t_afko
EXCEPTIONS
OTHERS = 1.
-> export already selected order numbers via ranges tab to memory
EXPORT t_aufnr_range_done TO MEMORY ID 'LOI002'.
**MOD-006
IMPORT created_masteridocs_pro FROM MEMORY ID 'YLOI001'.
ycloidownlprot-end_date = sy-datum.
ycloidownlprot-end_time = sy-uzeit.
ycloidownlprot-idocs_selected = created_masteridocs_pro.
ycloidownlprot-in_progress = cloi_false.
insert or update entry (dependant if entry already exists)
MODIFY ycloidownlprot.
COMMIT WORK.
MESSAGE i967(z001) WITH created_masteridocs_pro.
**MOD-006
Update last run date and time
IF p_update = 'X'.
PERFORM update_last_run.
ELSE.
MESSAGE s000 WITH text-022.
"Last Run Date and Last Run Time not updated
LEAVE LIST-PROCESSING.
ENDIF.
INCLUDE rcordf01.
*& Form validate_last_run_date_time
text
--> p1 text
<-- p2 text
*FORM validate_last_run_date_time.
IF p_date IS INITIAL OR
p_time IS INITIAL.
IF sy-batch IS INITIAL.
MESSAGE s000 WITH text-017.
"Last Run date & Last Run Time can not be blank
LEAVE LIST-PROCESSING.
ELSE.
MESSAGE e000 WITH text-017.
"Last Run date & Last Run Time can not be blank
ENDIF.
ENDIF.
*ENDFORM. " validate_last_run_date_time
*& Form update_last_run
text
--> p1 text
<-- p2 text
FORM update_last_run.
CONSTANTS:
l_c_name TYPE rvari_vnam VALUE 'Z_PROC_DATE',
l_c_name1 TYPE rvari_vnam VALUE 'Z_PROC_TIME',
l_c_type TYPE rsscr_kind VALUE 'P',
l_c_numb TYPE tvarv_numb VALUE '0000'.
Update last run date
UPDATE tvarv SET low = sy-datum
WHERE name = l_c_name AND
type = l_c_type AND
numb = l_c_numb.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
g_run_date = text-015. "#EC
"Updation of TVARV table failed for ZLAST_RUN_DATE. Update manually
ENDIF.
Update last run time
UPDATE tvarv SET low = sy-uzeit
WHERE name = l_c_name1 AND
type = l_c_type AND
numb = l_c_numb.
IF sy-subrc = 0.
COMMIT WORK.
ELSE.
ROLLBACK WORK.
g_run_time = text-016. "#EC
"Updation of TVARV table failed for ZLAST_RUN_TIME. Update manually
ENDIF.
ENDFORM. " update_last_run
Maybe you are looking for
-
How can I review my account in itunes without credit cart
how can I review my account in itunes without credit cart
-
Taking the Labor out of Labor Day: HP Support Assistant
Did you know that temporary files should be removed from your computer and that the hard disk should be defragmented regularly? Just like any appliance that used on daily basis, computers need regular maintenance to perform well. In honor of Labor Da
-
Hi gurus, I am working on an interface where I need to do goods Issue and for this I have written the following code, but my return statement is returning this error" Goods movement not possible with mvmt type 201" data: begin of it_input_file occurs
-
DG4ODBC returns garbage on select on my custom ODBC Driver.
I have a custom ANSI ODBC driver on used in Windows 2008 Server. When I select I get garbage characters. My Sql Statement - select name from abc@link should return 'abc'. Using select dump(name, 10) from abc@link returns - Typ = 1 Len = 72: 216, 82
-
Is there a way of extending the no of minutes afte...
Is there a way of extending the no of minutes after scheduled end of program to record? My Wife has Call The Midwife on series record and every week she loses the last few mins of the program??? Anyone else having similar problems? Many Thanks Kim