Transfer files from dead iMac G5 to new iMac via Time Capsule

Hello, I just purchase the latest iMac. Just in time, as my iMac G5 died. It no longer starts up. I get a gray screen and the fans going full bore. Not a big deal since I also have Time Capsule and it has been faithfully backing up my G5.
My new iMac is up and running but I can't access my files on Time Cpasule. I access the drive via Wi-Fi. I get an error "Warning - Resource temporarily unavailable". Time Capsule shows up under the Shared Drives, I see the sparsebundle, double click and that's when I get the warning.
Is it because I'm trying to access the file via Wi-Fi? Do I need a USB to USB connector(which are hard to find)? I haven't called Apple Care yet, but I got to gain access to my old G5 files.
Thanks,
Mark

It is not possible to use usb cable to access files..
I am not sure why the wireless access is failing.. how old is the TC?
Let me suggest you pull the TC from the network.. plug it into the computer by ethernet.. then hold down reset.. that will not cause any data loss on the drive.. but will reset the TC to default.. then see if you can access the old backup via the ethernet.
Read Q14-17 here. http://pondini.org/TM/FAQ.html
Note carefully about transferring files from a different Mac.
If you end up unable to do it.. have the hard disk removed from the old G5 imac as that may still work.

Similar Messages

  • What cables do i use to transfer files from my pc to a new iMac with lion os.

    What cables do I need to transfer files from my pc to a new iMac with OS lion?

    Gkenb wrote:
    What cables do I need to transfer files from my pc to a new iMac with OS lion?
    If they're both on the same network you can enable file sharing on both and transfer files through your LAN, you don't need any cables.

  • I'm thinking of  buying one of the new Imacs and am presently a PC user - how hard is it or how can I transfer files from my PC to a new IMac

    I am thinking about purchasing a new IMac and presently use a PC.  I would like to find out how difficult it is to transfer files from the PC to the IMac or in more detail - just how is it done.  Many thanks for any responses.

    There are several ways by which it can be done. There is a special Migration Assistant for transferring an entire user account from a PC to the Mac. You would have to establish a network connection between the two machines.
    Transfer the files you want to an external USB hard drive from the PC then transfer from the external drive to the Mac.
    Ask the Apple retailer if they will transfer your data to the new Mac at the time of purchase. You will need to bring the PC with you.

  • Before I transfer files from my PC to the new imac should I load office for Mac and parallees? Will this mean I have to open the new account on my imac first and thus have two user accounts when I transfer the PC? I would prefer to only have one account.

    IIt was in my mind to load office then transfer. After to load paralels and transfer my windows system. I have a new copy of office for Mac plus paralels PC to Mac transfer version 8. As this is my first mac (I have ipads and iphones) I am unsure of what to do. Also to confuse matters I use a windows laptop as my sync machine for the phones and ipads (i do have a cloud account with backup) can I transfer both machines to my new imac? I will have a 1tb fusion drive + 2tb time capsule although I only have less than 400GB of data on both machines. Hope this is not too confusing for everyone but I am looking forward to sorting this mess out by just using the one machine.

    Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant.  If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

  • Transfer files from old Mac Pro to new iMac

    I have a 2008 Mac Pro with Snow Leopard and just purchased a new iMac with Maverick. How do I transfer my files (iPhoto library, address book, documents, etc.)? Can I connect the two computers or must I download the files to an EHD and then import them to the new iMac? If I can connect them, what is the procedure?

    iPhoto can see my old library (I can select it using "Swtich to Library...") but the photos are not showing -- I am getting an empty library with all the introductory "get started" info.
    Try to open the copied library by double-clicking it in the Finder. iPhoto does obviously not open your selected library, but creates a new one.
    How did you copy using the network? Are you signed into the new mac and copy as the user on your new mac? Or are you copying while being signed in on your old mac?
    iPhoto '08, Mac OS X (10.6.8), iPhoto 7.1.5 obsolete?
    If your old library really still is iPhoto 7.1.5, run iPhoto Library Upgrader first:
    iPhoto '11: About the Library Upgrader

  • How can I import Quicken Files from a G4 to a new iMac.

    I need to transfer my Quicken 2007 files from my G4 to my new iMac. My G4 is running OS 10.4 and Quicken Essentials for Mac requires 10.5 or above. My G4 cannot run 10.5. My iMac is running Lion and I've heard if I load Mac Essentials on my iMac, I won't be able to import the files from my G4. Anybody have any ideas?
    I've been considering making a copy of my system and applications folders on an external firewire drive, then connecting it to my iMac. I thne plan to use the external drive as a startup disk and load Quicken essentials on the external drive. Then, once eveything is loaded, I was hoping I could copy the files and pull them over to my applications folder on my iMac. Does anybody know if that will work?

    I'm in the same boat!!! Been a long Time Quicken user and they finally made the software almost un-useable. I have 2 intel laptops in the house and a G4. The intel systems are both running Lion had I known the quicken conversion software dosen't run on Lion I would have converted all my quicken backups (going back to 1997) before installing Lion.
    To answer your question, what I have found out is convert all your files on Lepoard then update to lion. The conversion software that comes with Quicken Essentials will work on Lepoard. Thats how I converted mine. But last week I needed to go back to and old backup looking for some transactions and found the Lion issue. Had to boot up the G4 and load the old Quicken software to look at the backups.
    Been really thinking of switching to another product.

  • I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I changed my password to use migration to transfer files from a G4 to a new macbook pro but now I have to sign in every time. How do I avoid the sign in?

    I clicked on keychain access but getting a warning that it quit unexpectedly and it won't reopen.

  • Best way to transfer files from old Macbook Pro to new one?

    I just got a new Macbook Pro from Apple...YEEEEAAAHHHH! 
    So....
    What's the best way to transfer files from old Macbook Pro to new one?  I know Migration assistant, but is there a recommended way?  I don't want to put do a system restore or transfer everything from the old laptop, but I do want to move important things like photos, music, documents and such over.  Any suggestions on best way to do this?
    Another question, perhaps subquestion.  If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?
    Just looking for hints from the experts so this puppy is set up in the best way possible.

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • Does anyone know how to transfer songs from my ipod to my new imac?

    Does anyone know how to transfer songs from my ipod to my new imac computer?
    My library on the new imac is quite small and all the songs on my ipod were purchased and
    I want them on my computer.
    Thanks for any help!!!
    Cheers!

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • I am trying to transfer files from my MacBook Pro to my iMac using migration Assstance and they cannot find one another.  My MacBook Pro uses Migration Assistance 1.0.6 and my new iMac uses 10.5.3.  What can I do to allow sharing?

    How does one transfer Files from an old MacBook Pro to a new iMac?

    10.5.3 is at least part of the problem.  You need to apply the latest updates to that mac.
    See How do I set up a new Mac from an old one, its backups, or a PC?  Select the appropriate link and follow the instructions carefully.

  • Moving files from bootable SATA drive to new iMac

    I'm looking to upgrade to a new iMac from a very old G4 (running Leopard). The G4 is dead, but the SATA drive I installed a few years ago is still good, and has a lot of files I'd like to transfer to the iMac. If I use a drive dock, is there any reason I can't retrieve those files from the SATA drive to the iMac? If it makes any difference, the SATA drive is currently the boot drive for the G4, and is partitioned between apps and files.

    See Pondini's setup instructions.

  • Transfer files from one account to another on iMac

    How can I transfer files from another account on my iMac to my account.  I am the administrator of this iMac.  The files I want to copy are on the desktop of my son's account on this computer.  They are just too big to email to myself.
    Thank you.
    Rajpal

    Hi..
    File Sharing may work for you better than transferring documents   >  Mac Basics: File Sharing

  • Transfer files from old macbook pro to new macbook pro using mavericks

    I have called Apple support about 5 times about this and have been given 3 or 4 different response none of them work. 
    I do not have an ethernet cable.
    The computers are on same network.
    I have time capsule not yet set up.  Apple support told me to use usb but no port on new mac. So old mac is running OSX 10.8.5 and new one is Maverick.  I cannot update files on old computer as I just get this message to sign in to my acount that used to buy old apps.I am 1.5 hours away from apple store so if i needed special cable from Apple i would have purchased it with Time Capsule.  I was told that to do it wirelessly would take over a day.
    Right now am puzzling over what is best to do without losing files.  I dont want to lost my music files as I have had them for a long time and all were not purchased from itunes store. 
    Any thoughts on where to start feel free to suggest them.
    Thanks Jan

    Just one comment on this:
    ‘If I have, say, an older version of iPhoto but a newer version of one on my new Macbook Pro, will it still transfer photos no problem?’
    the problems are ALWAYS in the reverse way, when you have the newest (or a newer) version of a given app, and wish to transfer its library to an older version.
    Otherwise, see the link to Pondini.
    I have been using Martin Jahn’s iBackup, with which I have become accustomed and works fine. It also makes daily backups. Its advantage over other apps is that you may add whatever you wish to save, beside its default settings (which you may delete or cancel, of course, even if not recommended); it also has a friendly interface and easily customizable. Of course, this is a personal view, you may try other methods as well, or other backup apps. All are good if you are satisfied and correspond to your needs.

  • How to Transfer Files from Your Ipod to a New Computer when You Don't Have the Old One?

    My old computer crashed and I have a new one now, how do I transfer the files from my ipod to my new computer itunes program???

    I am having the same problem.  My iPod classic has all of the music on it and I need to get it into iTunes.  Unfortunately, I had not had the computer very long and it did crash before I was able to back anything up.

  • Can't transfer files from my PC to my new Mac over our wireless network

    I have a Linksys WRT54G router connected to a cable modem, which is connected to a desktop PC. I have a Dell laptop connected to the internet wirelessly, and my MacBook Pro is also connected to the internet wirelessly. No problem there, the internet works on both.
    However, I'm trying to transfer my files from the Dell to my new MacBook, and I get to the point where it asks for my username and password. I've typed in everything I can think of, and the Mac gives me Error -43, 'something or other is not found'.
    I don't remember ever assigning myself a username or password when I set up the wireless network. I've had no problem connecting to the Internet with the Dell laptop, but have never been able to share files or a printer with the desktop PC to which the router is connected.
    What's going on here?

    However, I'm trying to transfer my files from the Dell to my new MacBook, and I get to the point where it asks for my username and password. I've typed in everything I can think of, and the Mac gives me Error -43, 'something or other is not found'.
    That would be the username & password of the user account on the Mac.
    (ref: http://www.ifelix.co.uk/tech/3020.html)

Maybe you are looking for

  • Default current date in the variable

    Hi Friends,                  I have developed an Ageing Query. Now the requirement is, as soon as the query is executed, by default the variable should have the current date. I have the restricted Keyfigures as 0-10, 11-25 etc in the Column. Can some

  • A few questions about Adobe Flash

    questions: 1.Can adobe flash use web services? 2.How does adobe flash handle the back button or bookmarks? 3.Can adobe flash interact with javascript on a page? Like call a javascript function and pass it XML as a parameter? 4.How does adobe flash ha

  • Halo Scroll Actionscript

    Hello, I am having a small problem with the Halo scroll bar. I am using this code(below) to controll the scrolling. The scrollbar graphic is going beyond the track mc on the "up" press and not going to the end of the track on the "down" press. Any he

  • Open images in CS5

    I just re installed my applications and find that when I click on a jpeg it opens in Preview rather then Photoshop. I wasn't this way before re installing my applications. How can I change it so that when I double click on a jpeg it opens in photosho

  • Binary memory calculator on near cahce

    I am trying to cap cache size on client using near cache.      <near-scheme>                <scheme-name>extend-near</scheme-name>                <front-scheme>                     <local-scheme>                          <high-units>500M</high-units>